Improved Algorithm for Face Mask Detection Based on YOLO-v4

Brain-computer interfaces (BCI) allow for the brain to communicate with electronic devices. Concerning the BCI paradigms, motor imagery uses brain signals to decode an imagined movement. However, this is a hard task given the low signal-to-noise ratio. Usually, the main steps in BCI models are pre-processing, feature extraction, and classification. In recent years, Convolutional Neural Networks (CNNs) have been gaining relevance in several areas of science due to their feature extraction, translation invariance, and parameter sharing capa-bilities. Another, more recent way of feature extraction is using attention mechanisms, which are layers of neural networks based on human attention and have the ability to highlight important features. A variation of the attention mechanism is the Convolutional Block Attention Module, which combines the CNN structure with the attention mechanism. In this work, we propose a new model that joins the core architecture of EEGNet, a compact CNN widely used in the literature, with the Convolutional Block Attention Module and residual connections. The residual connections were introduced to lower data degradation throughout the model. The results highlight the residual connection's importance for the performance of the model. The proposed model obtained a kappa result 5.2% better than the EEGNet with a p-value less than 0.01 on BCI Competition IV dataset 2a, which is a well-known dataset for Motor Imagery. Furthermore, the proposal was better than EEGNet for most subjects and had the best-worst case.

MRI image classification of brain tumors is critical for accurate and early diagnosis. New developments in deep learning have revealed that inserting attention mechanisms into convolutional neural networks can greatly improve classification performance. This work assesses the effectiveness of Squeeze-and-Excitation (SE) and Convolutional Block Attention Module (CBAM) integrated with the ResNet50 model for brain tumor classification. The SE module recalibrates channel-wise feature responses, while CBAM enhances feature representation by combining channel and spatial attention. The SE and CBAM are combined with ResNet50, greatly increasing classification accuracy, precision, and recall when compared to the basic model, according to experimental results on MRI datasets. The suggested model employs attention mechanisms to focus valuable information selectively and suppress irrelevant information. The experiments on publicly available brain tumor datasets display great improvements over basic CNN models, with precision, recall, accuracy, as well as F1 score at 0.9914, 0.9903, 0.9945, and 0.9908, respectively. From these results, the importance of attention mechanisms in deep learning models for medical imaging is highlighted, which suggests that SE and CBAM modules can be available as more dependable and effective instruments for brain tumor classification in clinical settings. Future studies should investigate transformer-based and hybrid attention techniques to enhance automated brain tumor categorization.

Recently, multi-level feature networks have been extensively used in instance segmentation. However, because not all features are beneficial to instance segmentation tasks, the performance of networks cannot be adequately improved by synthesizing multi-level convolutional features indiscriminately. In order to solve the problem, an attention-based feature pyramid module (AFPM) is proposed, which integrates the attention mechanism on the basis of a multi-level feature pyramid network to efficiently and pertinently extract the high-level semantic features and low-level spatial structure features; for instance, segmentation. Firstly, we adopt a convolutional block attention module (CBAM) into feature extraction, and sequentially generate attention maps which focus on instance-related features along the channel and spatial dimensions. Secondly, we build inter-dimensional dependencies through a convolutional triplet attention module (CTAM) in lateral attention connections, which is used to propagate a helpful semantic feature map and filter redundant informative features irrelevant to instance objects. Finally, we construct branches for feature enhancement to strengthen detailed information to boost the entire feature hierarchy of the network. The experimental results on the Cityscapes dataset manifest that the proposed module outperforms other excellent methods under different evaluation metrics and effectively upgrades the performance of the instance segmentation method.

Motivated by the increasing popularity and success of attention mechanisms, we observe that popular convolutional attention models like Squeeze-and-Excite (SE) and Convolutional Block Attention Module (CBAM) rely on expensive multi-layer perceptron (MLP) layers. These MLP layers significantly increase computational complexity, making such models less applicable to 3D image contexts, where the data dimensionality and computational costs are inherently higher. In 3D medical imaging, such as pulmonary CT scans, efficient processing is crucial due to the large volume of data. Traditional 2D attention mechanisms, when generalized to 3D, increase the computational load, creating a demand for more efficient attention mechanisms that can operate effectively within a 3D tasks. In this work, we investigate the possibility of incorporating fully convolutional attention within 3D context. Particularly, we present two 3D fully convolutional attention blocks in which we demonstrate effectiveness within the 3D context. We demonstrate effectiveness of the proposed method using the pulmonary CT scans for 3D lung nodule detection. Building on existing 3D nodule detection methods, we present AttentNet, an automated lung nodule detection framework from CT images that performs detection as an ensemble of two stages, candidate proposal stage (Region Proposal Network), in which a high number of candidates is produced, and a false positive reduction stage to reduce the number of false alarms. Throughout our work, we compare the proposed 3D convolutional attention blocks to a number of popular 2D convolutional attention mechanisms by generalizing them to 3D modules, including SE units and CBAM channel attention and spatial attention units. We also compare these to Transformer self-attention units. For the False positive reduction stage, we incorporate a joint analysis approach that considers the variable nodule morphology by aggregating spatial information from different contextual levels. We use LUNA-16 lung nodule detection dataset to demonstrate the benefits of using the proposed fully convolutional attention blocks comparing to baseline popular lung nodule detection methods where no attention is used. It is worth noting that our work does not aim at achieving state-of-the-art results in the lung nodule detection task, rather to demonstrate the benefits of incorporating fully convolutional attention within a 3D context.

As the core technologies represented by Internet of Things (IoT) technology and computer vision technology booming, object detection algorithms based on deep learning have received high attention in various fields. Object detection is not only a core problem in the field of computer vision, but also a prerequisite and basis for many computer vision tasks, and has important applications in the fields of autonomous driving and video surveillance. The task of object detection is to find all the targets of interest in an image and determine their category and location. Object detection includes two tasks: object classification and object localization. However, object classification focuses on the most discriminative part of the feature map, and object localization requires a feature map focusing on the whole region of the object. Therefore, in order to improve the detection accuracy, we propose a CBAM-RetinaNet network model.CBAM (Convolutional Block Attention Module) is a lightweight convolutional attention module, which combines channel and spatial attention mechanism modules. The channel attention module focuses on the meaningful information in the input image, which would lead to an increase in the accuracy of object classification. The spatial attention module focuses on the location information of the object, which may improve the accuracy of object localization. The experiment results show that the proposed achieves better object detection performance on the PASCAL VOC2007 dataset, and the accuracy is 2% higher than that of the RetinaNet model, which has good experimental results.

In recent years, attention mechanisms have shown great potential in various computer vision tasks. However, most existing methods focus on developing more complex attention modules for better performance, which inevitably increases the complexity of the model. To overcome performance and complexity tradeoffs, this paper proposes efficient spatial and channel attention (ESCA), a symmetric, comprehensive, and efficient attention module. By analyzing squeeze-and-excitation (SE), convolutional block attention module (CBAM), coordinate attention (CA), and efficient channel attention (ECA) modules, we abandon the dimension-reduction operation of SE module, verify the negative impact of global max pooling (GMP) on the model, and apply a local cross-channel interaction strategy without dimension reduction to learn attention. We not only care about the channel features of the image, we also care about the spatial location of the target on the image, and we take into account the effectiveness of channel attention, so we designed the symmetric ESCA module. The ESCA module is effective, as demonstrated by its application in the ResNet-50 classification benchmark. With 26.26 M parameters and 8.545 G FLOPs, it introduces a mere 0.14% increment in FLOPs while achieving over 6.33% improvement in Top-1 accuracy and exceeding 3.25% gain in Top-5 accuracy. We perform image classification and object detection tasks on ResNet, MobileNet, YOLO, and other architectures on popular datasets such as Mini ImageNet, CIFAR-10, and VOC 2007. Experiments show that ESCA can achieve great improvement in model accuracy at a very small cost, and it performs well among similar models.

With the continuous development of deep learning technologies, fault prediction techniques based on various neural networks have been evolving. The deep learning modules based on U-Net residual networks have shown significant advantages in both learning efficiency and effectiveness. In this paper, we propose a deep learning model that integrates a 3D U-Net residual architecture, Convolutional Block Attention Module (CBAM), and Multi-scale Enhanced Global Attention (MEGA) module for automatic seismic fault detection and segmentation. This model can effectively handle complex 3D seismic data, fully exploiting both spatial and channel information, significantly improving the prediction accuracy for small faults, while only slightly increasing the computational cost.Firstly, the model uses the 3D U-Net as the backbone framework, where the residual blocks (BasicRes) extract features through multiple convolution layers. The CBAM module is incorporated to apply attention weighting, enhancing the model's ability to focus on critical information. The CBAM module combines channel attention and spatial attention, effectively adjusting the importance of feature maps from different dimensions, enabling the model to identify potential fault features in complex seismic data.Secondly, the MEGA module is introduced into the model, which further improves the model's feature representation ability by fusing multi-scale features and applying a global attention mechanism. By weighting global information, the MEGA module helps the model better capture key seismic fault features during feature fusion. This design allows the model to focus not only on local details but also to fully utilize the global contextual information in 3D data, thereby enhancing the accuracy of fault detection.After validation, the model achieved promising results in seismic fault detection tasks, automatically identifying and segmenting fault structures in seismic data. The accuracy was improved from 80% with the original 3D U-Net residual network to 85%-87%. This provides strong support for applications such as seismic exploration and subsurface imaging.Keywords: Seismic Fault Detection, 3D U-Net, Convolutional Block Attention Module (CBAM), Multi-scale Enhanced Global Attention (MEGA), Deep Learning

Heartbeat characteristic points are the main features of electrocardiogram (ECG), which can provide important information for ECG-based cardiac diagnosis. In this manuscript, we proposed a modified DenseNet to detect ECG characteristic points, including the onset, peak and termination points of P-wave, QRS complex wave and T-wave. The proposed DenseNet embedded the convolutional block attention module (CBAM) and feature pyramids in convolutional blocks. The model in this manuscript was trained using PhysioNet’s QT database, a dataset containing 105 2-lead dynamic recordings at 250 Hz. The mean± variance of the detection errors measured by our proposed method for the detection of the onset, peak and termination points of P-wave, the onset and termination points of QRS-wave, and the peak and termination points of T-wave were - 0.32 ± 18.08 ms, -0.56 ± 17.6 ms, -5.96 ± 16.84 ms, -5.8 ± 14.12 ms, -6.24 ± 18.76 ms, -0.2 ± 31.36 ms, 0.84 ± 27.24 ms, respectively. The results show that the deep learning network constructed in this manuscript can accurately detect the characteristic points of heartbeat, laying the foundation for automatic extraction of diagnosis-related key information from ECG.

Wheat head identification and localization are crucial for field management and yield estimation. Traditional wheat head detection relies on labor-intensive manual counting. To address this issue, this study establishes a densely populated wheat head dataset and correspondingly proposes an efficient, rapid real-time model of CB-YOLO, which incorporates a Convolutional Block Attention Module (CBAM) mechanism (a sophisticated fusion of spatial attention mechanism and channel attention mechanism) so as to integrate channel and spatial features. Also, with an incorporated Bidirectional Feature Pyramid Network (BiFPN) to the neck, crowded wheat head detection was enhanced by establishing connections from the backbone to the bottom-up path. This enhancement surpasses the performance of the basic YOLOv5L model, achieving [Formula: see text] of 94.3% and [Formula: see text] of 53.9%. Among 10 classical detection models, CB-YOLO has a relatively small parameter size of 44[Formula: see text]Mb and high computing speed of 108[Formula: see text]G FLOPs. Additionally, ablation experiments demonstrate that compared to YOLOv5L without CBAM and BiFPN, the feature fusion module improves [Formula: see text] from 93.2% to 94.3%, indicating its effectiveness in enhancing detection performance. In conclusion, CB-YOLO exhibits outstanding identification performance, showing its feasibility in practical agricultural applications, and future work will focus on improving its localization ability.

Focusing on the problems of complex structure and low feature extraction efficiency that exist in some traditional neural network algorithms, an improved convolutional neural network, combined with a convolutional attention mechanism, is proposed to im- prove the network feature extraction efficiency and reduce the network complexity. First, the convolutional block attention module (CBAM) was introduced, which can strengthen the extraction of useful features from the data, thereby improving the network feature extraction efficiency. Second, the residual structure was optimized, and the original multi-layer convolution was simplified to a single-layer convolution, which reduces the complexity of the model and improves the diagnostic efficiency. Then, the Rectified Linear Unit (ReLU) activation function in the model was replaced with the better-performing Exponential Linear Unit (ELU) activation function. Finally, the overall structure of the ResNet model was optimized. The CBAM-ResNet network model was based on the traditional ResNet18 model and consists of a CBAM module and the optimized ResNet18 model. Finally, experiments were performed using sensor data collected from rolling bearing test benches. The experimental results show that the feature extraction capability and efficiency of the new model are better than those of several other classic deep network models and the original network model, and this reduces the time complexity and model size while also maintaining a high accuracy rate.

Maritime vessel detection in nearshore waters is a fundamental capability for artificial intelligence (AI)-enabled maritime transportation systems, including coastal monitoring, traffic management, and digital maritime services. Although attention mechanisms are widely incorporated into YOLO-based detectors, their relative effectiveness in marine environments under strictly controlled experimental conditions remains insufficiently clarified. This study presents a systematic comparison of Coordinate Attention (CA), Convolutional Block Attention Module (CBAM), and CLIP-based semantic fusion within a unified YOLOv8n framework for binary discrimination between ships and fishing boats in cluttered coastal imagery. All model variants were trained under identical data partitions and optimization settings to isolate architectural effects. The experimental results show that CA achieves the highest localization robustness (mAP@0.5:0.95 = 0.6127) and substantially improves precision (+7.13% over baseline), while CBAM provides the most balanced performance with the highest F1-score. In contrast, CLIP-based semantic fusion consistently degrades detection reliability, indicating limitations of global vision–language representations in small-scale maritime datasets. Precision–Recall and F1 analyses further reveal architecture-specific confidence calibration behaviors relevant to deployment-sensitive maritime applications. The findings provide practical guidance for selecting attention mechanisms in AI-driven maritime perception systems and support reliable AI integration in marine science and engineering applications.

Background: The accurate classification between malignant and benign breast lesions detected on mammograms is a crucial but difficult challenge for reducing false-positive recall rates and improving the efficacy of breast cancer screening. Objective: This study aims to optimize a new deep transfer learning model by implementing a novel attention mechanism in order to improve the accuracy of breast lesion classification. Methods: ResNet50 is selected as the base model to develop a new deep transfer learning model. To enhance the accuracy of breast lesion classification, we propose adding a convolutional block attention module (CBAM) to the standard ResNet50 model and optimizing a new model for this task. We assembled a large dataset with 4280 mammograms depicting suspicious soft-tissue mass-type lesions. A region of interest (ROI) is extracted from each image based on lesion center. Among them, 2480 and 1800 ROIs depict verified benign and malignant lesions, respectively. The image dataset is randomly split into two subsets with a ratio of 9:1 five times to train and test two ResNet50 models with and without using CBAM. Results: Using the area under ROC curve (AUC) as an evaluation index, the new CBAM-based ResNet50 model yields AUC = 0.866 ± 0.015, which is significantly higher than that obtained by the standard ResNet50 model (AUC = 0.772 ± 0.008) (p < 0.01). Conclusion: This study demonstrates that although deep transfer learning technology attracted broad research interest in medical-imaging informatic fields, adding a new attention mechanism to optimize deep transfer learning models for specific application tasks can play an important role in further improving model performances.

Weeds are one of the primary factors that reduce crop productivity by competing for nutrients and water, causing the plant to lose weight and resulting in reduced grain yield. Traditional agricultural practices often rely on uniform herbicide application, which can contaminate soil and raise costs. On agricultural land, selective weed treatment are an efficient and cost-effective way to control weeds that require a deep learning-based crop and weed segmentation system. Many existing crop and weed segmentation research works focus on achieving precise crop and weed segmentation results, rather than building lightweight models to deploy on edge devices. To attain this, we develop an effective and efficient convolutional neural network, namely the Concatenated Attention U-Net with Convolutional Block Attention Module (CAUC). By integrating Linear Concatenated Blocks (LCB), Attention Gate (AG) connections, and Convolutional Block Attention Module (CBAM), the proposed model efficiently utilizes feature maps among its architectural components to achieve superior performance. Depth-wise convolution layers and 1 × 1 convolution layers in LCBs reduce computational complexity. To enable the proposed model to identify the weed portions in multiple crop fields, we integrated three datasets in this research work, namely the Crop/Weed Field Image Dataset (CWFID), Sugar Beet, and Sunflower datasets. Experimental results on carrot, sugar beet, and sunflower crop datasets demonstrate high Accuracy (99.09%), MIoU (81.02%), and F1-score (99.06%), with a modest model size (5.6 MB) and computational parameters (0.377 million). We developed a lightweight computer vision application (13.7 MB) to demonstrate the model’s efficacy on low-computational devices.

Acquiring the growth information of tobacco plants quickly and accurately is an important prerequisite for their daily management. In view of the problem that the convolutional neural network is easily affected by background information, this study introduces the Convolutional Block Attention Module into the U <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2-</sup> Net. This method is mainly composed of an encoder and a decoder. Before the feature map is decoded, it will go through the Convolutional Block Attention Module to filter more important features and inhibit the invalid features. In the decoder, in order to fuse the features of objects in different scales, the feature maps in the decoder are up-sampled and then concatenated. This information aggregation solves the problem of difficult object detection at different scales to some extent. The results of this method are compared with four current mainstream deep learning models(U <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> -Net, DeeplabV3+, PSP-Net, U-Net). The result shows: 1) The U <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> -Net network based on the Convolutional Block Attention Module has the highest extraction accuracy for the UAV visible light remote senseing of tobacco(accuracy was 98.53%, recall was 96.00%,F1-Score was 96.38%, kappa coefficient was 0.95, IOU was 93.02%); 2)In the extraction of the three test areas, the extraction value of this method is highly consistent with the label area value(the area ratios of a total of 13 plants in the three regions were kept between 90% and 100%),the effect is much higher than that of DeeplabV3+ and PSP-Net, and slightly higher than the extraction effect of U <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> -Net and U-Net. 3)In the segmentation of three typical canopy closure regions of A, B, and C, most of the accuracy factors in different regions can reach 94% and above. It can be seen that the method in this study has certain advantages in feature extraction and has certain value in practical application.

Sheep behavior recognition helps to monitor the health status of sheep and prevent the outbreak of infectious diseases. Aiming at the problems of low detection accuracy and slow speed due to the crowding of sheep in real farming scenarios, which can easily obscure each other, this study proposes a lightweight sheep behavior recognition model based on the YOLOv8n model. First, the Convolutional Block Attention Module (CBAM) is introduced and improved in the YOLOv8n model, and the channel attention module and spatial attention module are changed from serial to parallel to construct a novel attention mechanism, PCBAM, to enhance the network’s attention to the sheep and eliminate redundant background information; second, the ordinary convolution in the backbone network is replaced with depth-separable convolution, which effectively reduces the number of parameters in the model and reduces the computational complexity. The study takes the housed breeding sheep as the test object, installs a camera diagonally above the sheep pen to collect images and makes a data set for testing, and in order to verify the superiority of the PD-YOLO model, compares it with a variety of target detection models. The experimental results show that the mean average precision (mAP) of the model proposed in this paper are 95.8%, 98.9%, and 96.2% for the three postures of sheep lying, feeding, and standing, respectively, which are 8.5%, 0.8%, and 0.8% higher than those of YOLOv8n, respectively, and the size of the model has been reduced by 13.3% and the amount of computation has been reduced by 12.1%. The inference speed reaches 52.1 FPS per second, which is better than other models in meeting the real-time detection requirement. To verify the practicality of this research method, the PD-YOLO model was deployed on the RK3399Pro development board for testing, and a high inference speed was achieved. It can provide effective technical support for sheep smart farming.