Integration of optical interferometers for displacement sensing is very attractive because of its high resolution, high stability, device compactness, etc. In fact, there have been several reports1–5 on integrated-optic devices for sensing mirror vibration/ displacement along the direction of a sensing beam propagation with resolution of sub-micrometer. In an integrated-optic displacement/position sensor3, a focusing grating coupler has been integrated and displacement measurement with long working distance can be achieved without an external collimating lens. It has also been proposed that a grating coupler of double grating is applicable for another sensing configuration6, in which two beams are radiated with a small separation angle by the grating coupler from the waveguide and the displacement of a grating scale crossing the radiated beams is measured. We have proposed and demonstrated a new integrated-optic device7 for sensing the displacement of a grating scale. In the proposed sensor, the two beams are radiated separately from two grating couplers, diffracted by a grating scale and linearly focused onto integrated photodiodes (PDs). The use of the linearly focusing beams has an advantage in reduction of PD size, namely in reduction of ground noise and PD capacitance in comparison with a case6 using the beams without focusing. Another advantage is a possibility for sensing two-dimensional displacement by integrating two sets of the components on one substrate, since two focal lines can be crossed on a sensor head and used for sensing displacement along two directions independently8. In order to construct the linearly focusing configuration, we modified a linearly focusing grating coupler (LFGC)9,10 to couple a diverging guided wave to a beam of conical wavefront in the air. In this paper, we describe the proposed integrated-optic grating-scale-displacement sensor and discuss the features.