Intelligent and secure real-time auto-stop car system using deep-learning models

COVID-19 is highly infectious and causes acute respiratory disease. Machine learning (ML) and deep learning (DL) models are vital in detecting disease from computerized chest tomography (CT) scans. The DL models outperformed the ML models. For COVID-19 detection from CT scan images, DL models are used as end-to-end models. Thus, the performance of the model is evaluated for the quality of the extracted feature and classification accuracy. There are four contributions included in this work. First, this research is motivated by studying the quality of the extracted feature from the DL by feeding these extracted to an ML model. In other words, we proposed comparing the end-to-end DL model performance against the approach of using DL for feature extraction and ML for the classification of COVID-19 CT scan images. Second, we proposed studying the effect of fusing extracted features from image descriptors, e.g., Scale-Invariant Feature Transform (SIFT), with extracted features from DL models. Third, we proposed a new Convolutional Neural Network (CNN) to be trained from scratch and then compared to the deep transfer learning on the same classification problem. Finally, we studied the performance gap between classic ML models against ensemble learning models. The proposed framework is evaluated using a CT dataset, where the obtained results are evaluated using five different metrics The obtained results revealed that using the proposed CNN model is better than using the well-known DL model for the purpose of feature extraction. Moreover, using a DL model for feature extraction and an ML model for the classification task achieved better results in comparison to using an end-to-end DL model for detecting COVID-19 CT scan images. Of note, the accuracy rate of the former method improved by using ensemble learning models instead of the classic ML models. The proposed method achieved the best accuracy rate of 99.39%.

Deep learning algorithms can be used to design systems that report data on patients and deliver warnings to medical applications or electronic health information if there are changes in the patient's health. These systems could be created using deep Learning. This helps verify that patients get the proper effective care at the proper time for each specific patient. A healthcare decision support system was presented using the Internet of Things and deep learning methods. In the proposed system, we examined the capability of integrating deep learning technology into automatic diagnosis and IoT capabilities for faster message exchange over the Internet. We have selected the suitable Neural Network structure (number of best-hidden layers and activation function classes) to construct the e-health system. In addition, the e-health system relied on data from doctors to understand the Neural Network. In the validation method, the total evaluation of the proposed healthcare system for diagnostics provides dependability under various patient conditions. Based on evaluation and simulation findings, a dual hidden layer of feed-forward NN and its neurons store the tanh function more effectively than other NN. To overcome challenges, this study will integrate artificial intelligence with IoT. This study aims to determine the NN's optimal layer counts and activation function variations.

Electricity load forecasting is a crucial undertaking within all the deregulated markets globally. Among the research challenges on a global scale, the investigation of deep transfer learning (DTL) in the field of electricity load forecasting represents a fundamental effort that can inform artificial intelligence applications in general. In this paper, a comprehensive study is reported regarding day-ahead electricity load forecasting. For this purpose, three sequence-to-sequence (Seq2seq) deep learning (DL) models are used, namely the multilayer perceptron (MLP), the convolutional neural network (CNN) and the ensemble learning model (ELM), which consists of the weighted combination of the outputs of MLP and CNN models. Also, the study focuses on the development of different forecasting strategies based on DTL, emphasizing the way the datasets are trained and fine-tuned for higher forecasting accuracy. In order to implement the forecasting strategies using deep learning models, load datasets from three Greek islands, Rhodes, Lesvos, and Chios, are used. The main purpose is to apply DTL for day-ahead predictions (1–24 h) for each month of the year for the Chios dataset after training and fine-tuning the models using the datasets of the three islands in various combinations. Four DTL strategies are illustrated. In the first strategy (DTL Case 1), each of the three DL models is trained using only the Lesvos dataset, while fine-tuning is performed on the dataset of Chios island, in order to create day-ahead predictions for the Chios load. In the second strategy (DTL Case 2), data from both Lesvos and Rhodes concurrently are used for the DL model training period, and fine-tuning is performed on the data from Chios. The third DTL strategy (DTL Case 3) involves the training of the DL models using the Lesvos dataset, and the testing period is performed directly on the Chios dataset without fine-tuning. The fourth strategy is a multi-task deep learning (MTDL) approach, which has been extensively studied in recent years. In MTDL, the three DL models are trained simultaneously on all three datasets and the final predictions are made on the unknown part of the dataset of Chios. The results obtained demonstrate that DTL can be applied with high efficiency for day-ahead load forecasting. Specifically, DTL Case 1 and 2 outperformed MTDL in terms of load prediction accuracy. Regarding the DL models, all three exhibit very high prediction accuracy, especially in the two cases with fine-tuning. The ELM excels compared to the single models. More specifically, for conducting day-ahead predictions, it is concluded that the MLP model presents the best monthly forecasts with MAPE values of 6.24% and 6.01% for the first two cases, the CNN model presents the best monthly forecasts with MAPE values of 5.57% and 5.60%, respectively, and the ELM model achieves the best monthly forecasts with MAPE values of 5.29% and 5.31%, respectively, indicating the very high accuracy it can achieve.

BackgroundRice is one of the major food crops in the world, and the monitoring of its growth condition is of great significance for guaranteeing food security and promoting sustainable agricultural development. Leaf area index (LAI) is a key indicator for assessing the growth condition and yield potential of rice, and the traditional methods for obtaining LAI have problems such as low efficiency and large error. With the development of remote sensing technology, unmanned aerial multispectral remote sensing combined with deep learning technology provides a new way for efficient and accurate estimation of LAI in rice.ResultsIn this study, a multispectral camera mounted on a UAV was utilized to acquire rice canopy image data, and rice LAI was uniformly estimated over multiple periods by the multilayer perceptron (MLP) and convolutional neural network (CNN) models in deep learning. The results showed that the CNN model based on five-band reflectance images (490, 550, 670, 720, and 850 nm) as input after feature screening exhibited high estimation accuracy at different growth stages. Compared with the traditional MLP model with multiple vegetation indices as inputs, the CNN model could better process the original multispectral image data, effectively avoiding the problem of vegetation index saturation, and improving the accuracies by 4.89, 5.76, 10.96, 1.84 and 6.01% in the rice tillering, jointing, booting, and heading periods, respectively, and the overall accuracy was improved by 6.01%. Moreover, the model accuracies (MLP and CNN) before and after variable screening showed noticeable changes. Conducting variable screening contributed to a substantial improvement in the accuracy of rice LAI estimation.ConclusionsUAV multispectral remote sensing combined with CNN technology provides an efficient and accurate method for the unified multi-period estimation of rice LAI. Moreover, the generalization ability and adaptability of the model were further improved by rational variable screening and data enhancement techniques. This study can provide a technical support for precision agriculture and a more accurate solution for rice growth monitoring. More feature extraction and variable screening methods can be further explored in future studies by optimizing the model structure to improve the accuracy and stability of the model.

Deep learning, in particular Convolutional Neural Network (CNN), has achieved promising results in face recognition recently. However, it remains an open question: why CNNs work well and how to design a 'good' architecture. The existing works tend to focus on reporting CNN architectures that work well for face recognition rather than investigate the reason. In this work, we conduct an extensive evaluation of CNN-based face recognition systems (CNN-FRS) on a common ground to make our work easily reproducible. Specifically, we use public database LFW (Labeled Faces in the Wild) to train CNNs, unlike most existing CNNs trained on private databases. We propose three CNN architectures which are the first reported architectures trained using LFW data. This paper quantitatively compares the architectures of CNNs and evaluate the effect of different implementation choices. We identify several useful properties of CNN-FRS. For instance, the dimensionality of the learned features can be significantly reduced without adverse effect on face recognition accuracy. In addition, traditional metric learning method exploiting CNN-learned features is evaluated. Experiments show two crucial factors to good CNN-FRS performance are the fusion of multiple CNNs and metric learning. To make our work reproducible, source code and models will be made publicly available.

Objectives/Aim: The present paper deals with building a smart assistant with the aim of assisting the visually impaired people in mobility with confidence by realizing the nearby obstacles and also implement image processing techniques to recognize people. Methods: We use Raspberry Pi 4 which has increased computing performance and is interfaced to the picamera, GPS and GSM modules. Arduino pro mini with buzzer, ultrasonic sensors and vibration motors are used for obstacle detection. Certain libraries important for image processing are used such as OpenCV, Dlib, face detection (Haar cascades, HOG + Linear SVM, or CNNs), espeak for converting text to speech. Programming was implemented through Python and Arduino compiler. Findings: Analysis was carried out using the proposed system for the blind and visually impaired people who could move around comfortably with confidence and were also able to detect objects and recognize people. Hence the proposed system removes the use for the cumbersome white cane in exchange for small and handy modules which can be used in the form of wearables mounted on shoulders, hands and legs to detect the obstacles from multiple directions and provide for a comfortable wear. It was determined that the Raspberry pi 4 was incapable of running CNN detection for which ideally computer GPU was required, so HOG detection method was used instead. Application/Improvements: This project can be implemented mainly in the commercial field of helping visually impaired people with poor eyesight or being completely blind. Industrial applications can be devised and enhanced like robots and machineries along with Security, Identifying and Tracking. Keywords: Face Recognition; Obstacle Detection; Open Source Computer Vision (OpenCV); Deep Learning; Histogram of Oriented Gradients (HOG); Support Vector Machine (SVM); Convolutional Neural Network (CNN)

Plant diseases pose significant economic challenges and may lead to ecological consequences. Although plant pathologists have a significant ability to diagnose plant diseases, rapid, accurate, and early diagnosis of plant diseases by intelligent systems could improve disease control and management. This study evaluates six efficient classification models (classifiers) based on deep learning to detect common tomato diseases by analyzing symptomatic patterns on leaves. Additionally, group learning techniques, including simple and weighted majority voting methods, were employed to enhance classification performance further. Six tomato leaf diseases, including Pseudomonas syringae pv. syringae bacterial spot, Phytophthora infestance late blight, Cladosporium fulvum leaf mold, Septoria lycopersici Septoria leaf spot, Corynespora cassiicola target spot, and Alternaria solani early blight, as well as healthy leaves, resulting in a total of seven classes, were utilized for the classification. Deep learning models, such as convolutional neural networks (CNNs), GoogleNet, ResNet-50, AlexNet, Inception v3, and MobileNet, were utilized, achieving classification accuracies of 65.8%, 84.9%, 93.4%, 89.4%, 93.4%, and 96%, respectively. Furthermore, applying the group learning approaches significantly improved the results, with simple majority voting achieving a classification accuracy of 99.5% and weighted majority voting achieving 100%. These findings highlight the effectiveness of the proposed deep ensemble learning models in accurately identifying and classifying tomato diseases, featuring their potential for practical applications in tomato disease diagnosis and management.

In distribution system state estimation (DSSE), the physics-based approach such as the weighted least squares (WLS) technique suffers from convergence issues, whereas the problem with conventional deep learning (DL) models is the lack of generalizability. To address these aspects, this paper proposes a physics-guided deep learning (PGDL) framework, which incorporates the power system physical laws into the deep learning models for DSSE. The proposed approach has two stages. The first stage leverages the DL models to understand the relation between the measurement data and system states, while the second stage involves physics-guided equations to decode the measurement data from the estimated states. Further, a loss function incorporating the estimated states and estimated measurements is derived to guide the learning process of the considered deep learning model. The required database for DL models is generated by carrying out power flow studies on a modified IEEE 37-node unbalanced distribution test system. Various deep learning models such as multi-layer perceptron (MLP), convolutional neural networks (CNN), and hybrid CNN-MLP are implemented in the proposed PGDL framework for DSSE and their performance metrics are evaluated and compared under different scenarios. The results show that the PGDL approaches achieve better performance compared with their conventional DL models and the basic WLS algorithm.

Small and Medium-sized Enterprises (SMEs) in Sri Lanka are increasingly turning to social media to gain insights into consumer preferences; however, they frequently lack sophisticated analytical tools to derive actionable insights. This research introduces a hybrid deep learning framework aimed at sentiment and emotion analysis specifically for the Sri Lankan cake sector. Customer reviews and social media comments were gathered and processed through various methods including text cleaning, emoji translation, stopword elimination, tokenization, and sequence padding. Several deep learning models— Convolutional Neural Networks (CNN), Bidirectional Long Short-Term Memory (BiLSTM), and Gated Recurrent Units (GRU) were assessed, along with hybrid models that combined CNN and BiLSTM with GPT-2 embeddings. The CNN+GPT-2 model achieved the highest accuracy in sentiment classification at 96.14%, while BiLSTM performed best in emotion classification with an accuracy of 91.57%. In terms of trend forecasting, Long Short-Term Memory (LSTM) outshone both SARIMA and Prophet, yielding the lowest error metrics and the most reliable sentiment predictions. These results underscore the potential of hybrid deep learning and transformer-based models to effectively capture complex consumer sentiments and provide SMEs with practical, AI-driven insights. This study is among the first to implement such hybrid NLP models within a localized Sri Lankan context, presenting a scalable approach for business intelligence and informed decision-making.

BackgroundIt is difficult for orthodontists to accurately predict the growth trend of the mandible in children with anterior crossbite. This study aims to develop a deep learning model to automatically predict the mandibular growth result into normal or overdeveloped using cephalometric radiographs.MethodsA deep convolutional neural network (CNN) model was constructed based on the algorithm ResNet50 and trained on the basis of 256 cephalometric radiographs. The prediction behavior of the model was tested on 40 cephalograms and visualized by equipped with Grad-CAM. The prediction performance of the CNN model was compared with that of three junior orthodontists.ResultsThe deep-learning model showed a good prediction accuracy about 85%, much higher when compared with the 54.2% of the junior orthodontists. The sensitivity and specificity of the model was 0.95 and 0.75 respectively, higher than that of the junior orthodontists (0.62 and 0.47 respectively). The area under the curve value of the deep-learning model was 0.9775. Visual inspection showed that the model mainly focused on the characteristics of special regions including chin, lower edge of the mandible, incisor teeth, airway and condyle to conduct the prediction.ConclusionsThe deep-learning CNN model could predict the growth trend of the mandible in anterior crossbite children with relatively high accuracy using cephalometric images. The deep learning model made the prediction decision mainly by identifying the characteristics of the regions of chin, lower edge of the mandible, incisor teeth area, airway and condyle in cephalometric images.

Daily scale streamflow forecasting in multiple stream orders of Cauvery River, India: Application of advanced ensemble and deep learning models

Cyber security in smart cities: A review of deep learning-based applications and case studies

Face anti-spoofing is the practice of using an authorized person's face to escape false face verification with a picture, video, mask, or another substitute. Latest innovations in face recognition and deep learning technology have made it possible to identify people from a distance using images acquired by a camera. The existing methods used different training sets and classifiers to recognize the face, which was difficult to classify and increase the time. A novel technology 3D Convolutional Restricted Basis Neural Network (CRBNN) is proposed in this paper to overcome this drawback. The proposed system is initialized by testing based on cross-entropy loss with augmented facial samples and further reinforced with an explicitly built generalization loss. The 3D-Convolutional layer is used for mapping the feature of the input image. Next, the Boltzmann technique is used for translation to form the reconstructed parameters. The Radial Basis Function Network (RBFN) is used to obtain an accurate classification. The experimental result proved the proposed CRBNN is given a better accuracy rate, less Equal Error Rate, and less time duration than existing methods. Our method is compared with spatial pyramid coding micro-texture (SPMT), Convolutional Neural Network (CNN), and radial basis function network (RBFN) and outperformed.

Water quality prediction (WQP) plays an essential role in water quality management for aquaculture to make aquaculture production profitable and sustainable. In this work, we propose hybrid deep learning (DL) models, convolutional neural network (CNN) with the long short-term memory (LSTM) and gated recurrent unit (GRU) for aquaculture WQP. CNN can effectively fetch the aquaculture water quality characteristics, whereas GRU and LSTM can learn long-term dependencies in the time series data. We conduct experiments using the two different water quality datasets and present an extensive study on the impact of hyperparameters on the performance of the proposed hybrid DL models. Furthermore, the performance of hybrid CNN-LSTM and CNN-GRU models are compared with different baseline LSTM, GRU and CNN DL models and also with attention-based LSTM and attention-based GRU DL models. The results show that the hybrid CNN-LSTM outperformed all other models in terms of prediction accuracy and computation time.

1 - Congruence of deep learning in biomedical engineering: future prospects and challenges