Lightweight Domain-Adaptive Modulation Classification Under SNR and Channel Mismatch

Cognitive Radio (CR) systems allow optimizing the use of the shared radio spectrum and enhancing the coexistence among different technologies by efficiently changing certain operating parameters of the radios such as transmit-power, carrier frequency, and modulation and coding scheme in real-time. Dynamic Spectrum Access (DSA), which allows radios to dynamically access and use the unused spectrum, is one of the tasks that are fundamental for a better use of the spectrum. In this paper, we extend the previous work on Automatic Modulation Classification (AMC) by using Deep Neural Network (DNNs) and evaluate the performance of these architectures on signals that are not only modulated but are also encoded. We call this the Automatic Modulation and Coding Scheme Classification problem, or \(AMC^2\). In this problem, radio signals are classified according to the Modulation and Coding Scheme (MCS) used during their transmission. Evaluations on a data set of 802.11 radio signals, transmitted with different MCS and Signal to Noise Ratio (SNR), provide important results on the impact of some DNN hyperparameters, e.g. number of layers, batch size, etc., in the classification accuracy.

The development of the Internet-of-Things (IoT) security is comparatively slower than the pace of the IoT innovations. The seamless IoT network operates in an untrusted environment and is exposed to many malicious active attacks. As the process of identifying the modulation format of signals is corrupted by noise and fading, automatic modulation classification (AMC) can be viewed as an effective approach to counter physical-layer threats for IoT as it can detect and identify the pilot jamming, deceptive jamming, and Sybil attacks. Nowadays, data-driven deep learning (DL) techniques, which are capable of extracting discriminative features and perform better robustness to channel and noise conditions, have drawn widespread attention. The deep residual network (ResNet) has a strong representative ability, which can learn latent information repeatedly from the received signals and improve the classification accuracy. Meanwhile, the gated recurrent unit (GRU), which is capable of exploiting temporal information of the received signal can expand the dimension of the signal features for satisfactory classification performance. Considering the advantages of the above networks, this article proposes a novel gated recurrent residual neural network (GrrNet) for feature-based AMC, where the amplitude and phase of the received signal are utilized as the inputs of GrrNet. In GrrNet, a ResNet extractor module is first designed to extract the highly representative features and then temporal information is obtained by the subsequent GRU module which is capable of processing the representative features with the arbitrary length for modulation classification. Moreover, extensive simulations are conducted to verify the classification performance and robustness of the proposed GrrNet and it is shown that GrrNet outperforms other recent DL-based AMC methods. Moreover, the influence of the network parameters, symbol length, and frequency offset on performance is also explored.

Automatic modulation classification (AMC) is deployed, as the intermediate step between signal detection and demodulation, to identify modulation schemes automatically. Modulation classification is a challenging task, especially in a non-cooperative environment, owing to the lack of prior information on the transmitted signal at the receiver; the problem will be more challenging in the multipath fading channel. The proposed AMC method based on optimal decision fusion by using wireless sensor networks provides a more accurate classification result than any one of the individual signal alone. Wireless sensor networks offer increased reliability and optimal decision fusion provides huge gains in overall classification performance as compared to that of the single sensor. Thus, optimal decision fusion based AMC by using wireless sensor networks greatly enhances classification performance of weak signals in non-cooperative communication environment. Classification performances of optimal decision fusion based AMC by using wireless sensor networks in the multipath fading channel are investigated and evaluated in terms of correct classification probability. Through Monte Carlo simulations, we demonstrate that the proposed AMC algorithm can greatly outperform that of single sensor in multipath fading channel.

In this research, a classifier is proposed for automatic modulation classification of some common modulation schemes, i.e., BPSK, QPSK, 8-PSK and 16-QAM. Our proposed classifier considers multipath fading effects on the received signal in a non-Gaussian noise environment. Automatic modulation classification is very challenging in real-world scenarios due to fading effects and additive Gaussian mixture noise on modulation schemes. Most of the available modulation classifiers do not consider the fading effects which results in degradation of classification in a blind channel environment. In our work, the channel is supposed to be suffering from excessive additive Gaussian mixture noise and frequency selective fading resulting in low signal SNR. The estimation of the unknown channel along with noise parameters is performed using ECM algorithm and then used in maximum-likelihood classifier for the classification of modulation schemes. Simulation results are presented that show 2 dB improvement in performance than classifier which considers only Gaussian noise in the received signal.

Nowadays, automatic modulation classification (AMC) plays an important role in both cooperative and non-cooperative communication applications. Very often, multipath fading channels result in the severe AMC performance degradation or induce large classification errors. The negative impacts of multipath fading channels on AMC have been discussed in the existing literature but no solution has ever been proposed so far to the best of our knowledge. In this paper, we propose a new robust AMC algorithm, which applies higher-order statistics (HOS) in a generic framework for blind channel estimation and pattern recognition. We also derive the Cramer-Rao lower bound for the fourth-order cumulant estimator when the AMC candidates are BPSK and QPSK over the additive white Gaussian noise channel, and it is a nearly minimum-variance estimator leading to robust AMC features in a wide variety of signal-to-noise ratios. The advantage of our new algorithm is that, by carefully designing the essential features needed for AMC, we do not really have to acquire the complete channel information and therefore it can be feasible without any a priori information in practice. The Monte Carlo simulation results show that our new AMC algorithm can achieve the much better classification accuracy than the existing AMC techniques.

Automatic modulation classification (AMC) of underwater acoustic communication signals is of great significance in national defense and marine military. Accurate modulation classification methods can make great contributions to accurately grasping the parameters and characteristics of enemy communication systems. While a poor underwater acoustic channel makes it difficult to classify the modulation types correctly. Feature extraction and deep learning methods have proven to be effective methods for the modulation classification of underwater acoustic communication signals, but their performance is still limited by the complex underwater communication environment. Graph convolution networks (GCN) can learn the graph structured information of the data, making it an effective method for processing structured data. To improve the stability and robustness of AMC in underwater channels, we combined the feature extraction and deep learning methods by fusing the multi-domain features and deep features using GCN. The proposed method takes the relationships among the different multi-domain features and deep features into account. Firstly, a feature graph was built using the properties of the features. Secondly, multi-domain features were extracted from the received signals and deep features were extracted from the signals using a deep neural network. Thirdly, we constructed the input of GCN using these features and the graph. Then, the multi-domain features and deep features were fused by the GCN. Finally, we classified the modulation types using the output of GCN by way of a softmax layer. We conducted the experiments on a simulated dataset and a real-world dataset, respectively. The results show that the AMC based on GCN can achieve a significant improvement in performance compared to the current state-of-the-art methods. Our approach is robust in underwater acoustic channels.

Automatic modulation classification (AMC) for single signals has been widely studied in the past two decades. Meanwhile, the demand for multi-signal AMC is also increasing; however, single-signal AMC performs poorly and few methods were proposed for multi-signal AMC. To address this problem, a blind AMC method for overlapped co-channel signals applying capsule networks is proposed. Multiple transmitters transmit signals simultaneously and signals are received by a single-antenna receiver. The method handle signals at intermediate frequency directly, and is able to detect the number of signals automatically. Numerical results demonstrate the effectiveness of our proposed method, and excellent generalization ability provided by capsule network.

The Internet of Things (IoT) permeates every aspect of our daily lives as billions of interconnected devices are deployed in the physical world. However, IoT networks operate in an untrusted environment and often suffer from many malicious active attacks. Automatic modulation classification (AMC), which can identify the modulation format of intercepted signals without prior knowledge, is a vital technology in countering physical-layer threats of IoT. However, most of the existing algorithms assume the channel is time invariant, and the AMC in time-varying channels is not been well studied. To deal with this dilemma, a novel AMC algorithm MCBLDN consisting of multiple convolutional neural networks (CNNs), a bidirectional long short-term memory network (BLSTM), and a deep neural network (DNN) is proposed. In MCBLDN, a multislot constellation diagram (CD) method is proposed to extract time-evolution characteristics for generating more discriminative features. Specifically, different grayscale subimages generated by slotted CDs are processed serially by their respective CNNs. Therefore, MCBLDN is overparameterized and time consuming. In addition, the frequency offset and phase offset caused by time-varying channels are neglected in MCBLDN, which is detrimental to the performance of AMC. To address the mentioned disadvantages, a lightweight MCBLDN with a spatial transformer network (SLCBDN) is proposed. First, the multiple CNNs in MCBLDN are pruned into a lightweight classification model, and the input data are rearranged to facilitate parallel processing by the lightweight CNN. Additionally, the spatial transformer network (STN) is utilized to reduce the influence of frequency offset and phase offset. Numerical results verify that the proposed method achieves superior performance and higher speed compared to the baseline algorithm MCBLDN.

Automatic modulation classification using KELM with joint features of CNN and LBP

This article focuses on automatic modulation classification (AMC) in wireless communication systems. A convolutional neural network (CNN) with three layers is introduced for the AMC process. Over degraded channels, it is assumed that the constellation diagrams of received signals do not show sharp points as in the case of pure signals. Instead, the points spread to constitute circle‐shaped objects. With more deterioration in channel conditions, these circle‐shaped objects begin to show overlapping. This behavior motivates us to use object detection, when dealing with the modulation classification task. The selection of the adopted transforms in this article is made from the object detection perspective. Different 2D transforms are considered on the constellation diagrams and compared for better classification performance. These transforms are the Radon transform (RT), the curvelet transform, and the phase congruency (PC). They are applied on the 2D constellation diagrams prior to the classification task with the CNN. The classification of the modulation format at different signal‐to‐noise ratios (SNRs) is considered in this article from the constellation diagrams, and the preprocessed constellation diagrams using RT, curvelet transform, and PC. Seven types of modulation formats are considered in this study to represent both spread and dense constellation diagram patterns, and the study extends from −10 to 10 dB. Analysis of the results indicating the most suitable preprocessor according to the constellation type and the SNR involved is provided.

Automatic modulation classification plays an essential role in cognitive communication systems. Traditional automatic modulation classification approaches are primarily developed under Gaussian noise assumptions. Nevertheless, recent empirical studies show that the impulsive noise has emerged in numerous wireless communication systems. The bursty nature of impulsive noise fundamentally challenges the applicability of traditional automatic modulation classification approaches. In order to accurately identify the modulation schemes in impulsive noise environment, in this paper, we propose a novel modulation classification approach through using hyperbolic-tangent cyclic spectrum and multi-branch attention shuffle neural networks. First, based on the designed hyperbolic-tangent autocorrelation function, hyperbolic-tangent cyclic spectrum is proposed to effectively suppress impulsive noise and extract the discriminating features. Then, based on the hyperbolic-tangent cyclic spectrum, a novel deep shuffle neural network is proposed as a classifier to perform the modulation classification through multi-branch attention mechanism to reweight all features. Both numerical and real-data experimental results demonstrate that the proposed algorithm can correctly classify modulation schemes with high accuracy and robustness in impulsive noise.

Automatic modulation classification (AMC) plays an important role in many fields to identify the modulation type of wireless signals. In this paper, we introduce deep learning to signal recognition. Based on architecture analysis of the convolutional neural network (CNN), we used real signal data generated by instruments as dataset, and proposed an improved CNN architecture to achieve compatible recognition accuracy of modulation classification. According to various conditions of signal noise ratio (SNR), we test the proposed CNN architecture with the real sampled signals. Experiments results show that the high-layer network is not necessary for modulation recognition with high SNR signals. The proposed CNN architecture has higher average classification accuracy than RESNET and is more compatible for modulation classification of signals with lower SNR.

Automatic modulation classification (AMC) is widely used in both civilian and military applications. This paper presents a new method for the automatic classification of higher order QAM signals via Rayleigh fading channel, using a modified Joint Power Estimation and Modulation Classification (JPEMC) algorithm and Fisher criterion. The proposed algorithm has low computational complexity. The advantages of our new algorithm are we don't need the channel information as a prior and the estimation value of SNR. The proposed approach was evaluated in Monte Carlo simulations. The experimental results show that the percentage of identification can reach 98% when SNR is more than 5dB.

Cognitive Radio (CR) networks has been presented in the last decade as a solution to the problem of increasing congestion in frequency spectrum, through opportunistic spectrum access techniques. One of the main components of Cognitive Radio receivers is the Automatic Modulation Classification (AMC), in which the CR can blindly identify the modulation scheme of a detected signal. AMC has several applications, including military, spectrum surveillance and management, and commercial applications. In this paper we propose an AMC based on two different Neural Networks (NN) classifiers: Feed-Forward with Resilient Back-Propagation NN and Probabilistic NN. NN classifiers take their inputs as a feature vector from a Features extraction phase. Features selected for classification are the statistical features of the received signal's instantaneous amplitude, frequency and phase. Simulations show that both NN classifiers can achieve over 80% correct classification up to Signal-to-Noise Ratio (SNR) of 5 dB, and the probability of correct classification increases up to 99% at a SNR of 15 dB.

Real-time modulation classification architecture in software defined radio