Load forecasting based on grasshopper optimization and a multilayer feed-forward neural network using regressive approach

Electrical Load forecasting plays a significant part for power systems planning, operation and control for efficacy companies as well as policy makers to develop the reliable as well as stable energy infrastructure. Various approaches like conservative, Artificial Intelligence (AI) as well as hybrid approaches had been introduced to analyze the short-term load forecasting. However, these approaches had faced several problems like low convergence speed, high computational complexity and minimum prediction accuracy. To overcome these challenges, this research proposes the hybrid method of improved Support Vector Machine (SVM) and Grasshopper Optimization Algorithm (GOA) called SVM-GOA based feature section and hyperparameter optimization for electrical load forecasting. In pre-processing step, the min-max normalization technique is used for the scaling the feature data. Furthermore, the proposed SVM-GOA is trained and tested by simulations on the Singapore dataset. The effectiveness of the proposed SVM-GOA is estimated by various performance metrics like Root Mean Square Error (RMSE), Mean Absolute Percent Error (MAPE), Mean Absolute Error (MAE), R-Square (R2) and it achieves the values of 0.6547, 2.13, 0.69 respectively when compared to the previous methods like Artificial Neural Network (ANN) and Federated Learning (FL).

Globally, wind energy if properly harnessed, could serve as a source of energy generation in Africa. This study compared the performance of two Machine Learning (ML) algorithms (Linear regression and Random Forest) in predicting wind speed in five major cities in Africa (Yaoundé, Pretoria, Nairobi, Cairo and Abuja). Wind data were collected between January 1, 2000, and December 31, 2022, using the Solar Radiation Data Archive. The data preprocessing was carried out with 80% of the data used for training and 20% for validation. The performance of these ML algorithms was evaluated using Mean Square Error (MSE), Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE) and coefficient of determination (R2). The result shows that Nairobi (3.814795 m/s) closely followed by Cairo (3.606453 m/s) has the highest mean wind speed while Yaoundé (1.090512 m/s) has the lowest. Based on the performance metrics used, the two Machine Learning algorithms were competitive. Still, the Linear Regression (LR) algorithm outperformed the Random Forest Algorithm in predicting wind speed in all the selected major African cities. In Yaoundé (RMSE = 0.3892, MAE= 0.3001, MAPE =0.5030), Pretoria (RMSE=1.2339, MAE=0.9480, MAPE=0.7450) Nairobi (RMSE= 0.4223, MAE =0.6499, MAPE =0.1872), Nairobi (RMSE=0.6499, MAE=0.5171, MAPE =0.1872), Cairo (RMSE =1.0909, MAE =0.8544, MAPE =0.3541) and Abuja (RMSE = 0.70245, MAE =0.5441, MAPE= 0.4515) the Linear regression algorithms was found to outperformed Random Forest Regression. Therefore, the Linear regression algorithm is more reliable in predicting wind speed compared with the Random Forest regression.

Microwave pyrolysis of oil palm fibre (OPF) was conducted to study the effect of microwave power, temperature, and nitrogen (N2) flow rate on the production of hydrogen and biochar. The effect of microwave power ranging from 400 to 900 W, reaction temperatures ranging from 450°C to 700°C, and N2 flow rates ranging 200 to 1,200 cm3 min−1 were investigated. The microwave power, reaction temperature, and N2 flow rates are directly proportional to hydrogen and inversely proportional to biochar yield. The characteristics of the biochar were analysed using CHNOS, scanning electron microscopy, and Brunauer–Emmett–Teller results. Central composite design was used to optimize the number of experiment. The optimized experimental datasets were used as inputs for developing a model that can predict the weight of hydrogen and biochar from microwave pyrolysis of OPF. A multilayer feedforward neural network model was developed by comparing the performance of 11 different types of backpropagation training algorithms. The 11 training algorithms belong to six classes, which are (a) additive momentum, (b) self‐adaptive learning rate, (c) resilient backpropagation, (d) conjugate gradient, (e) quasi‐Newton, and (f) Bayesian regulation (BR). Best performing training algorithm was selected based on the lowest error values computed. The objective of this research is to identify the most suitable training algorithm for this process. Levenberg–Marquardt and BR exhibited very good performance. BR exhibited best performance with lowest error values in predicting weight of hydrogen and biochar. The testing data error values for hydrogen weight is 0.216 root mean square error (RMSE), 0.144 mean absolute error (MAE), and 0.020 mean absolute percentage error (MAPE), and biochar is 0.886 RMSE, 0.489 MAE, and 0.019 MAPE. The optimum number of hidden neuron for this algorithm is 19 with mean square error 0.23. The biochar exhibits porous structure suggesting possible land application.

This article uses machine learning techniques as fuzzy and neuro-fuzzy ANFISs, to develop and compare prediction models capable of relating pregnant women’s exposure to air pollutants, such as Nitrogen Dioxide and Particulate Matter, the mother’s age, and the number of prenatal consultations to the incidence of premature birth. In the current literature, studies can be found that relate prematurity to the exposure of pregnant women to NO2, O3, and PM10; to Toluene and benzene, mainly in the window 5 to 10 days before birth; and to PM10 in the week before birth. Both models used logistic regression to quantify the effects of pollutants as a result of premature birth. Datasets from Brazil—Departamento de Informatica do Sistema Único de Saúde (DATASUS) and Companhia Ambiental do Estado de São Paulo (CETESB)—were used, covering the period from 2016 to 2018 and comprising women living in the city of São José dos Campos (SP), Brazil. In order to evaluate and compare the different techniques used, evaluation metrics were calculated, such as correlation (r), coefficient of determination (R2), Root Mean Square Error (RMSE), Mean Absolute Percentage Error (MAPE), Mean Square Error (MSE), and Mean Absolute Error (MAE). These metrics are widely used in the literature due to their ability to evaluate the robustness and efficiency of prediction models. For the RMSE, MAPE, MSE, and MAE metrics, lower values indicate that prediction errors are smaller, demonstrating better model accuracy and confidence. In the case of (r) and R2, a positive and strong result indicates alignment and better performance between the real and predicted data. The neuro-fuzzy ANFIS model showed superior performance, with a correlation (r) of 0.59, R2 = 0.35, RMSE = 2.83, MAPE = 5.35%, MSE = 8.00, and MAE = 1.70, while the fuzzy model returned results of r = 0.20, R2 = 0.04, RMSE = 3.29, MSE = 10.81, MAPE = 6.67%, and MAE = 2.01. Therefore, the results from the ANFIS neuro-fuzzy system indicate greater prediction capacity and precision in relation to the fuzzy system. This superiority can be explained by integration with neural networks, allowing data learning and, consequently, more efficient modeling. In addition, the findings obtained in this study have potential for the formulation of public health policies aimed at reducing the number of premature births and promoting improvements in maternal and neonatal health.

Improving the accuracy of dissolved oxygen (DO) prediction and establishing a water body DO prediction model are of great importance in water environment pollution management and planning management. In this paper, we propose a hybrid model (EEMD-Pearson-LSTM) of ensemble empirical modal decomposition-Pearson analysis and long-short memory neural network (LSTM), which firstly uses EEMD to decompose the non-stationary dissolved oxygen data into several sub-series that are easy to analyze, and secondly uses Pearson correlation analysis method to The screened subsequences are input to the LSTM network for training and prediction. By establishing the conventional LSTM model, EEMD-LSTM model, EEMD-BP model, and EEMD-Pearson-BP model for comparison under different time periods, root mean square error (RMSE), mean absolute error (MAE), mean absolute percentage error (MAPE), and coefficient of determination (R2) were used as evaluation indicators. In predicting the first 90 days of data, the RMSE, MAE, MAPE, and R2 of the EEMD-Pearson-LSTM model were 0.2355, 0.1893, 2.4710, and 0.8787, respectively, which were optimized by 37.88%, 35.44%, 37.42%, and 28.15%, respectively, compared with the traditional LSTM model, and the EEMD- LSTM model by 13.74%, 16.46%, 16.82%, and 4.98%, respectively, and the error of EEMD-BP network by 23.93%, 22.70%, and 24.32%, respectively, and its R2 by 11.17%, and the error of EEMD-Pearson-BP network by 18.62%, 14.07%, and 14.44%, and its R2 improved by 7.58%. To further demonstrate the advantages of EEMD-Pearson-LSTM, the prediction models for 30-day and 60-day time periods were selected for comparison, and the results showed that EEMD-Pearson-LSTM outperformed other models for the prediction of dissolved oxygen content in different time periods.

Accurate short-term prediction of residential power consumption is imperative for efficient energy system management. However, the complexity of high-resolution load data, nonlinear dynamics of load fluctuation, and external factor interactions pose challenges to traditional load forecasting methods. This work introduces a diffusion model-based and attention mechanism-enhanced temporal forecasting framework to address the volatility and uncertainty in load patterns. The proposed model enhances the noise robustness via diffusion processes, captures multi-scale temporal features through temporal convolutional networks, and adaptively focuses on critical time steps using attention mechanisms. Further, a dynamically weighted loss function is designed to improve both the prediction accuracy and latent representation quality. Experiments on multiple real-world residential load datasets show that the proposed model always outperforms benchmarks, reducing on average the mean absolute error (MAE) by 47.4%, symmetric mean absolute percentage error (SMAPE) by 39.7%, and mean absolute percentage error (MAPE) by 57.6%. It also achieves the superior root mean square error (RMSE) and Pearson correlation coefficient (PCC) performance, validating its effectiveness for high-resolution and multi-modal load forecasting.

Drought is a complex and frequently occurring natural hazard in many parts of the world. Therefore, accurate drought forecasting is essential to mitigate its adverse impacts. This research has inferred the implication and the appropriateness of the extreme learning machine (ELM) algorithm for drought forecasting. For numerical evaluation, time series data of the Standardized Precipitating Temperature Index (SPTI) are used for nine meteorological stations located in various climatological zones of Pakistan. To assess the performance of ELM, this research includes parallel inferences of multilayer perceptron (MLP) and autoregressive integrated moving average (ARIMA) models. The performance of each model is assessed using root mean square error (RMSE), mean absolute error (MAE), mean absolute percent error (MAPE), Kling‐Gupta efficiency (KGE), Willmott index (WI), and Karl Pearson’s correlation coefficient. Generally, graphical results illustrated an excellent performance of the ELM algorithm over MLP and ARIMA models. For training data of SPTI‐1, ELM’s best performance has observed at Chitral station (RMSE = 0.374, KGE = 0.838, WI = 0.960, MAE = 0.272, MAPE = 259.59, R = 0.93). For SPTI‐1 at Astore station, the numerical results are (RMSE = 0.688, KGE = 0.988, WI = 0.997, MAE = 0.798, MAPE = 247.35). The overall results indicate that the ELM outperformed by producing the smallest RMSE, MAE, and MAPE values and maximum values for KGE, WI, and correlation coefficient values at almost all the selected meteorological stations for (1, 3, 6, 9, and 12) month time scales. In summary, this research endorses the use of ELM for accurate drought forecasting.

Evaluation of artificial neurocomputing algorithms and their metacognitive robustness in predictive modeling of fuel consumption rates during tillage

Advances in industrial digital technologies have led to an increasing volume of data generated from industrial bioprocesses, which can be utilised within data-driven models (DDM). However, data volume and variability complications make developing models that captures the underlying biological nature of the bioprocesses challenging. In this study, a framework for developing data-driven models of bioprocesses is proposed and evaluated by modelling an industrial bioprocess, which treats industrial or agrifood wastewaters whilst simultaneously generating bioenergy. Six models were developed to predict the reduction in chemical oxygen demand from the wastewater by the bioprocess and statistically evaluated using both testing data (randomly partitioned data from the model development) and unseen data (new data not used during the model development). The statistical error metrics employed were the coefficient of determination (R2), root mean square error (RMSE), mean absolute error (MAE) and mean absolute percentage error (MAPE). The stacked neural network model was best able to model the bioprocess, having the highest accuracy on the testing data (R2: 0.98; RMSE: 1.29; MAE: 2.27; MAPE: 4.08) and the unseen data (R2: 0.82; RMSE: 2.57; MAE: 1.75; MAPE: 3.68). Data visualisation is used to observe (or confirm) whether new data points are within the model boundaries, helping to increase confidence in the model’s predictions on future data.

Tomatoes are among the world’s most significant vegetables, both in terms of production and consumption. Harvesting takes place in tomato production when the important quality attribute of total soluble solids content reaches its maximum possible level. Tomato total soluble solids content (TSS) is among the most crucial attribute parameters for assessing tomato quality and for tomato commercialization. Determination of total soluble solids content by conventional measurement methods is both destructive and time-consuming. Therefore, the tomato processing industry needs a rapid identification method to measure total soluble solids content (TSS). In this study, we aimed to estimate how much soluble solids there are in beef tomato fruit by Artificial Neural Networks (ANN) and Multiple Linear Regression (MLR) methods. The models were assessed using the Coefficient of Determination (R2), Mean Absolute Error (MAE), Root Mean Square Error (RMSE), and Mean Absolute Percentage Error (MAPE) metrics. The training data set results of the MLR model established to estimate the amount of brix in tomato fruit, calculated as MAE: 0.2349, RMSE: 0.3048, R2: 0.8441, and MAPE: 5.5368, while, according to the ANN model, MAE: 0.0250, RMSE: 0.031, R2: 0.9982 and MAPE: 0.5814. According to the metric outcomes, the ANN-based model performed better in both the training and testing parts.

Energy-saving design is becoming a trending topic and top-priority over the past decades due to high energy costs, limited available resources and growing urban development. Buildings are alluded to as the major contributors of energy consumption and environmental emissions across the globe. This calls for the development of precise forecasting models of energy consumption and carbon emissions. Hence, this research paper harnesses the implementation of several contemporary metaheuristics to accurately project heating and cooling energy (HEN and CEN) in residential buildings. In this respect, black widow optimization, dandelion optimization, dingo optimization, sparrow search, and red-tailed hawk optimization are among the studied metaheuristics in this research study. The prediction accuracies of the developed models are assessed stepping on the measures of i) relative absolute error (RAE), ii) mean absolute error (MAE), iii) mean absolute percentage error (MAPE), iv) root mean squared error (RMSE) and v) Nash-Sutcliffe efficiency (NSE). It is shown that the developed red-tailed hawk optimization-based model succeeded in accomplishing the most precise results of HEN and CEN. In this context, it predicted HEN with RAE (0.201), MAE (1.838), MAPE (7.626%), RMSE (2.826), and NSE (0.921). Besides, it anticipated CEN with RAE (0.234), MAE (2.009), MAPE (7.519%), RMSE (3.246), and NSE (0.883). It can be argued that this research study could benefit architects and designers in creating more energy-efficient buildings at an early stage.

Compressive strength is an important mechanical property of high-strength concrete (HSC), but testing methods are usually uneconomical, time-consuming, and labor-intensive. To this end, in this paper, a long short-term memory (LSTM) model was proposed to predict the HSC compressive strength using 324 data sets with five input independent variables, namely water, cement, fine aggregate, coarse aggregate, and superplasticizer. The prediction results were compared with those of the conventional support vector regression (SVR) model using four metrics, root mean square error (RMSE), mean absolute error (MAE), mean absolute percentage error (MAPE), and correlation coefficient (R2). The results showed that the prediction accuracy and reliability of LSTM were higher with R2 = 0.997, RMSE = 0.508, MAE = 0.08, and MAPE = 0.653 compared to the evaluation metrics R2 = 0.973, RMSE = 1.595, MAE = 0.312, MAPE = 2.469 of the SVR model. The LSTM model is recommended for the pre-estimation of HSC compressive strength under a given mix ratio before the laboratory compression test. Additionally, the Shapley additive explanations (SHAP)-based approach was performed to analyze the relative importance and contribution of the input variables to the output compressive strength.

Nowadays , nonlinear time series and artificial neural networks (ANN) models are used for forecasting in the field of business, agriculture and soon. Recent studies have shown, ANN have been successfully used for forecasting of financial and agriculture data series The classical methods used for time series prediction like Box-Jenkins or ARIMA assumes that there is a linear relationship between inputs and outputs. ANN have more advantages that can approximate to model both linear and nonlinear structures in time series, they are not able to handling both structures equally well. The autoregressive integrated moving average (ARIMA) model and two ANN models namely, Radial basis function neural networks (RBFNN), and Elman recurrent neural networks (ERNN) methods were applied to Hyderabad airport traffic data. The data obtained for 15 years from 2002–2003 to 2016–2017 about domestic and international passenger of International Airport of Hyderabad, India. In this research paper, we compared the performances of ARIMA, RBFNN and ERNN were based on three measures: mean absolute error (MAE), mean absolute percentage error (MAPE), and root mean square error (RMSE). The results showed that RBFNN obtained the smallest MAE, MAPE and RMSE in both the modeling and forecasting processes. The performances of the three models ranked in ascending order were: ARIMA, ERNN and the RBFNN model. Keywords: T ime series, forecasting, artificial neural networks, ARIMA models, radial basis function neural networks, and Elman recurrent neural networks Cite this Article R. Ramakrishna, Berhe Aregay, Tewodros Gebregergs. The Comparison in Time Series Forecasting of Air Traffic Data by Autoregressive Integrated Moving Average Model, Radial Basis Function and Elman Recurrent Neural Networks. Research & Reviews: Journal of Statistics . 2018; 7(3): 75–90p.

Under the dual pressures of global carbon emission reduction and production cost control, energy-intensive industrial enterprises are in urgent need of a balanced low-carbon operation strategy that reconciles economic benefits, environmental performance and production continuity. To address the limitations of existing methods in multi-dimensional objective balancing, this paper proposes a dynamic multi-objective optimization framework for industrial electricity consumption, integrating high-precision load forecasting and optimal scheduling. For load forecasting, an improved dual-gate optimization temporal attention long short-term memory (DGO-TA-LSTM) model is developed, which is modeled based on the one-year hourly electricity operation data (8760 samples) of a high-energy industrial enterprise in southern China, and its performance is verified via three standard metrics—the mean absolute error (MAE), root mean square error (RMSE) and mean absolute percentage error (MAPE)—compared with five mainstream baseline models. On this basis, when taking time-varying electricity-carbon factors and time-of-use electricity prices as dual guiding signals, a three-objective optimization model minimizing electricity cost, carbon emissions and load deviation is constructed, which is solved by the Non-Dominated Sorting Genetic Algorithm II (NSGA-II), with the Improved Gray Target Decision-Making (IGTD) method introduced to select the optimal compromise solution. Case study results show that the proposed scheme achieved a 1.9% reduction in electricity cost and a 30% reduction in carbon emissions compared with the unoptimized strategy, providing a feasible and scalable low-carbon operation path for industrial enterprises.

Essentially, Electricity Load Forecasting is an approximation of upcoming active loads from a variety of load buses before the active loads occur. Also, it is an important factor for power system energy management. Accurate and precise load forecasting can help to reduce the capacity of the power system, to make unit commitment decisions, and to increase the dependability of power systems. Hence, this paper presents a generalized regression Neural Network (GRNN) based approach for Short Term Load Forecasting (STLF). The results showed that the performance of GRNN with 30 neurons is better of short-term load forecasting in comparison with 10 neurons. For 10 neurons, the Mean Absolute Percentage Error (MAPE) was 2.10% and Mean Absolute Error (MAE) was 306.21 MWh. However, for 30 neurons it was observed that MAPE is 1.81% and MAE 268.48 MWh.