• Home
  • Search
  • Low temperature reactive ion etching for bulk micromachining
  • Cite Icon3
  • https://doi.org/10.1109/etfa.1994.402024Copy DOI Icon

Low temperature reactive ion etching for bulk micromachining

  • Nov 6, 1994
  • S Shimizu +4 more
Show More
  • Abstract
  • Literature Map
  • References
  • Citations
  • Similar Papers
Abstract

To make three dimensional micron structures, the directional deep etching techniques are very important. The directional wet etching technique is often used for the bulk micromachining. However, directions of the wet deep etching and profiles of products are restricted by the crystalline orientation of silicon substrate. To solve this problem, high speed and deep directional dry etching processes have been studied. The low temperature reactive ion etching (RIE) apparatus for the bulk micromachining was fabricated and the etching characteristics were investigated. The high etch rate of 0.022 /spl mu/m/s and the low normalized side etch ratio of 0.021 were realized at the cathode temperature of -80/spl deg/C. The etch rate is equal or a little higher than that of the directional wet etching.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

Similar Papers
  • Book Chapter

Introduction

  • May 28, 1998
  • M Sugawara
  • Research Article
  • Citations11

Spatial variation of the etch rate for deep etching of silicon by reactive ion etching

  • Jul 01, 1997
  • Journal of Vacuum Science &amp; Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
  • Bo Asp Mo/Ller Andersen +2
  • Research Article

Thermal Budget Reduction in Triple Gate Oxide Process by Wet Etch Technique

  • Apr 15, 2017
  • Electrochemical Society Meeting Abstracts
  • Hsin Tai +6
  • Conference Article

Fabrication technology of Si microfluidic devices for microbial cell trapping

  • Feb 08, 2007
  • Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE
  • Ramana M Badam +6
  • Research Article
  • Citations24

Reactive ion etching of aluminum using SiCl4

  • Feb 01, 1982
  • Journal of Vacuum Science and Technology
  • M Sato +1
  • Research Article
  • Citations5

Process dependence on two-capacitor matching properties with different etching technique

  • Jan 01, 1992
  • IEEE Transactions on Electron Devices
  • M Furukawa
  • Research Article
  • Citations38

Patterning challenges for direct metal etch of ruthenium and molybdenum at 32 nm metal pitch and below

  • Apr 26, 2022
  • Journal of Vacuum Science &amp; Technology B
  • Stefan Decoster +7
  • Research Article

Two-step Fabrication of Large Area SiO2/Si Membranes

  • Dec 17, 2012
  • Materials Science
  • Viktoras Grigaliūnas +7
  • Conference Article
  • Citations4

Dry etching method using double-layered etching mask for modulating shape of deep-etched quartz surface

  • Jun 01, 2011
  • T Abe +1
  • Conference Article
  • Citations1

Micro dry etching process for vertical cavity surface emitting lasers

  • Jan 01, 1991
  • AIP conference proceedings
  • A Matsutani +2
  • Research Article
  • Citations11

Unveiling the wet chemical etching characteristics of polydimethylsiloxane film for soft micromachining applications

  • Dec 05, 2016
  • Journal of Micromechanics and Microengineering
  • A Kakati +2
  • Research Article
  • Citations27

The CORE Sequence: A Nanoscale Fluorocarbon-Free Silicon Plasma Etch Process Based on SF6/O2 Cycles with Excellent 3D Profile Control at Room Temperature

  • Jan 02, 2020
  • ECS Journal of Solid State Science and Technology
  • Vy Thi Hoang Nguyen +9
  • Research Article
  • Citations18

The effect of a lithium niobate heating on the etching rate in SF6 ICP plasma

  • Jan 11, 2019
  • Materials Research Express
  • Artem A Osipov +2
  • Research Article
  • Citations8

Influence of reactive-ion-etching depth on interface properties in Al2O3/n-GaN MOS diodes

  • Sep 09, 2019
  • Japanese Journal of Applied Physics
  • Hirokuni Tokuda +3
  • Research Article
  • Citations5

Study of the Etching Processes of Si [1 0 0] Wafer Using Ultra Low Frequency Plasma

  • May 01, 2013
  • Materials Science Forum
  • Ahmed Rida Galaly +2
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.