Massive MIMO-OFDM indoor visible light communication system downlink architecture design

The exponential rise in wireless communication demands and allied applications have revitalized academia-industries to develop an efficient and potential solution. Furthermore, the high-pace increasing scarcity of radio spectrum has also alarmed researchers to achieve better Quality of Service (QoS) centric solution. To meet such demands Visible Light Communication (VLC) systems have gained global attention; however, up surging high rate, range and reliability (3R) needs demand better performance. Towards these goals, Multiple Input Multiple Output (MIMO) based VLC systems is an efficient approach; though its efficacy under Multiple Users (MU) conditions remains least explored. Enabling MIMO-MU based VLC can achieve 3R objectives effectively; however, factors like multipath attenuation, interferences and varied impairment-affects makes classical approached confined. The MIMO-MU VLC systems require robust error, noise or interference resilient transmission even under adverse conditions such as non-linear LED, multipath attenuation and interference. Towards these objectives, in this paper a highly robust MIMO-MU VLC system is developed that incorporates an augmented MIMO channel design and combined pre-coding and post equalization schemes. To alleviate major interference probability in MIMO-MU environment, proposed model incorporates time (delay)-multiplexing based data transmission followed by signal adaptive precoding and Volterra Kernel based Hybrid-equalizer. This approach enables interference and noise removal as well as LED non-linearity handling under MIMO-MU VLC communication. The use of a Volterra Kernel based Decision Feedback Equalization with both linear as well as non-linear equalization enables proposed VLC system to exhibit low Bit Error Rate with low modulation index and taps, that optimizes trade-off between performance as well as complexity.

A new precoding scheme for spectral efficient optical OFDM systems

Modern hospitals are beginning to adopt E-HEALTH as efficient complements to the traditional healthcare services. To support the E-HEALTH services, a locatable, radiation-free and high-capacity communication system is urgently needed in hospitals. Power line communication (PLC) system can use the ubiquitous power line network to power the light-emitting diode (LED) lights while serving as the backbone network for the indoor visible light communication (VLC) systems naturally. In this paper, an integrated broadband power line and visible light communication systems with OFDM modulation is proposed for the indoor hospital applications. This gives a brand-new solution to replace the conventional wireless communication systems in hospitals.

For channel estimation in the relay-assisted multiple-input multiple-output and orthogonal frequency division multiplexing indoor visible light communication (VLC) system affected by light source, there is a problem that the received signal cannot be separated by simple filtering. To solve this problem, a channel estimation by PARATUCK2-PARAFAC-based noise compensation which introduces tensors to construct the suitable model of VLC is proposed. First, the transmitting pilots for channel estimation and noise estimation are constructed separately with the Hermitian symmetry structure. Then the tensor-based transmission model of the indoor VLC system is established, and the signals for channel and noise estimations are received. Finally, an asymptotic estimation for separating signals from different sources and noise is proposed by PARATUCK2-PARAFAC. Simulation results show that the proposed algorithm provides a more effective scheme for channel estimation comparing with the state-of-the-art algorithms.

Since indoor visible light communication (VLC) systems can offer several potential advantages over their radio frequency and infrared counterparts, there has been a growing interest in VLC systems. Influenced by the complicated optical propagation environment, multipath effect existed which may result in intersymbol interference (ISI). Therefore, the bit error ratio (BER) performance is degraded excessively due to the effects of ISI. In this paper, we evaluate the performance of a nonlinear MAP (maximum a-posteriori probability) equalizer in indoor VLC environment. Moreover, Forward error correction (FEC) coding and interleaving is used. It will be shown that MAP equalization is well behaved in VLC systems. Besides, the systems with encoder and interleaver provide notable performance gain at the expense of higher computational complexity.

In general, visible light communication (VLC) systems, which utilise white light-emitting diodes (LEDs), only offer a bandwidth limited to the lower MHz region. Therefore, providing VLC-based high data rate communications systems using VLC becomes a challenging task. To address this challenge, we propose a solution based on multiplexing in both the frequency and space domains. We experimentally demonstrate a 4 × 4 imaging multiple-input multiple-output (MIMO) VLC system (i.e., space multiplexing) utilising multiband carrierless amplitude and phase (m-CAP) modulation (i.e., frequency multiplexing). Independently, both MIMO and m-CAP have separately shown the remarkable ability to improve the transmission speeds in VLC systems, and hence, here we combine them to further improve the net data rate. We investigate the link performance by varying the number of subcarriers m, link distance L, and signal bandwidth B <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">sig</sub> . From all the values tested, we show that a data rate of ~249 Mb/s can be maximally achieved for m = 20, B <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">sig</sub> = 20 MHz, and L = 1 m, at a bit error rate of 3.2 × 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-3</sup> using LEDs with ~4 MHz bandwidth.

Recently, multiple-input multiple-output (MIMO) has been proposed in visible light communications (VLC) systems to boost the data rate by utilizing spatial multiplexing. Unlike RF systems in VLC, lighting requirements, such as dimming control, should be taken into consideration for the design of a VLC transceiver. Moreover, VLC systems are inherently nonlinear and dynamic-range-limited. To drive an LED transmitter, the signal is bounded by a turn-on value and a saturation value. In this letter, we show how the dynamic-range constraint and dimming control impact the design of MIMO transceiver. Three different MIMO schemes are proposed and studied by theoretical analysis and simulation.

In visible light communication (VLC) system, the Orthogonal Frequency Division Multiplexing (OFDM) technique has been widely used to achieve a high data rate transmission. However, OFDM will cause high peak-to-average power ratio (PAPR) in the VLC system. In this paper, we propose and experimentally demonstrate a new interleaved Discrete Fourier Transform Spread Orthogonal Frequency Division Multiplexing (DFT-S OFDM) method. We compare the interleaved DFT-S technique to other PAPR reduction techniques, such as Clipping OFDM and conventional DFT-S. The experimental results show that interleaved DFT-S achieve FEC threshold for an overall 2.0Gb/s 32QAM signal over the 1.05m transmission. In addition, interleaved DFT-S presents significant PAPR reduction, low complexity and optimal BER performance, when compared to other techniques.

We propose and experimentally demonstrate a novel integrated passive optical network (PON) and indoor visible light communication (VLC) system based on Nyquist single carrier frequency domain equalization (N-SC-FDE) modulation with direct detection. In this system, a directly modulated laser and a commercially available red light emitting diode are served as the transmitters of the PON and VLC, respectively. To enable high spectral efficiency, high-speed transmission, and flexible multiple access with simplified optical network unit-side digital signal processing, multilevel, multiband quadrature amplitude modulations 128/64/16 are implemented here. VLC N-SC-FDE signals are successfully delivered a further 30 cm indoor distance after transmitting over a span of 40 km single mode fiber (SMF) together with 3 sub-band PON signals. As a proof of concept, a 10 Gb/s PON and 500 Mb/s VLC integrated system for three wired users and one wireless user is successfully achieved, which shows the promising potential and feasibility of this proposal to extend multiple services from metropolitan to suburban areas.

Visible light communication (VLC) system based on orthogonal frequency division multiplexing (OFDM) is promising for its ability to link a huge number of devices with high reliability and low latency. However, OFDM-based VLC systems are very sensitive to the symbol timing offsets. Thus, synchronisation algorithm is very important for OFDM-based VLC system. In this study, the authors first propose zero correlation code pair (ZCC pair) and investigate the periodical impulse-shaped correlation property of ZCC pair. Then the authors propose a novel timing offset estimation algorithm based on ZCC pair. The preamble is processed via peak-to-average power ratio (PAPR) reduction algorithms to overcome the PAPR problem in VLC systems. This algorithm achieves high accuracy and has low synchronisation error probability. The effectiveness of the authors' proposed algorithm has been demonstrated using computer simulation under non-light-of-sight VLC and Gaussian channels. The results show that the authors' algorithm outperforms the Schmidl Cox's and Park's algorithms in terms of synchronisation error probability and mean square error of timing error.

This paper investigates the effect of light emitting diodes (LEDs) positioning and allocation in the channel analysis performance for an indoor intra-vehicle visible light communication (VLC) system. The MATLAB simulation results focus on the received power and the signal to noise ratio (SNR) within a sports utility vehicle. Furthermore, this work aims to validate by investigating two different scenarios, one utilizing two sources of power and the other using three sources of power with various locations, how LED’s spatial positioning affects the VLC system and the probability of error. Proving the demand for considering LEDs layout positioning while designing a VLC system.

SummaryWith the development of new generation lighting sources, visible light communication (VLC) system has become a complementary solution to traditional radio frequency wireless system. However, the error performance of VLC system is degraded because of multipath effects and interference from other lighting sources that, in turn, reduce the communication range. This work targets the issue of performance degradation of VLC systems in terms of communication range and demonstrates a VLC system design that utilizes forward error correction (FEC) codes as the main tool to fix this issue. Furthermore, the work also covers practical implementation of the proposed VLC system using UART modules programmed in MATLAB. The hardware results demonstrate that the communication range of the proposed VLC system is enhanced up to 0.5 m. Over and above, it is also shown through simulations that the coding gain of the proposed design is more when compared with existing VLC system(s).

In this paper, an indoor visible light communication (VLC) system is considered. The system consists of multiple VLC access points that assist in providing high data rate downlink to multiple users. We propose Nth best node selection algorithm for indoor VLC system. The Nth best node selection analysis hold significance at times when the best node is not available; hence, the user has to switch to second or third best generally the Nth best. We derive exact closed form expressions for outage probability, coverage probability, average symbol bit error rate and ergodic capacity.

Smart city planners pay more attention towards visible light communication (VLC) system to achieve seamless high speed connectivity. A light emitting diode (LED) acts as a transmitter in VLC system. However, the nonlinear characteristics and dimming nature of LED limits the performance of the VLC system by degrading the quality of transmitted signal. In this paper, we propose an adaptive-learning-architecture (ALA) based predistortion technique to estimate and compensate for LED nonlinearities as well as increase the spectral efficiency of a VLC system. A DC-biased optical orthogonal frequency division multiplexing (DCO-OFDM) signal is considered. The performance with and without predistorter is analysed assuming optical line-of-sight (LOS) channel. It is shown that degradation due to LED nonlinearity can be compensated by using ALA-based predistortion, and the overall Predistorter-LED system is able to approach near-linear performance. Further, we investigate the impact of dimming on the performance of nonlinear LED in VLC system. Simulation results based on symbol error rate (SER), amplitude distortion (AM/AM) curves and constellation plots validate the performance of our proposed technique.

• Core Innovation & Objective • Developed a novel, integrated system architecture combining a modified USRP X310 software-defined radio platform with a custom-designed high-power LED optical transceiver. • Achieved high-speed, low-latency, and highly reliable audio-video transmission over Visible Light Communication (VLC) for intelligent transportation and vehicle-to-vehicle (V2V) applications, particularly in electromagnetically sensitive environments. • Key Technical Breakthroughs • LED Bandwidth Extension: Designed an innovative active pre-equalization circuit (based on a 4th-order high-pass RC bypass and op-amps) that dramatically increased the 3dB modulation bandwidth of a commercial 15W LED from 3 MHz to 120 MHz. • High-Speed Modulation: Successfully implemented 64QAM-OFDM modulation/demodulation using GNU Radio on the USRP, enabling spectrally efficient data transmission. • Advanced Optical Design: Custom-designed optical lenses (transmitter and receiver) and a high-power Bias-T circuit for efficient AC/DC coupling, ensuring the LED operates in its linear region and maximizing optical power transfer. • Stable Link Performance: Incorporated an Automatic Gain Control (AGC) circuit at the receiver, stabilizing the output voltage between 1.2V - 2.0V and maintaining a modulation signal-to-noise ratio (SNR) > 23 dB over varying distances. • Outstanding System Performance • The experimentally demonstrated performance metrics are exceptional for a VLC system: • Peak Data Rate: 500 Mbps • Communication Distance: 0 - 110 meters • Bit Error Rate (BER): As low as 1.74 × 10⁻⁵ (far below the 1 × 10⁻⁴ target) • End-to-End Latency: < 0.1 s • Beam Angle: 11.5° (Transmitter) • Field of View (FOV): ≤ 18° (Receiver) • System Integration and Design • Hardware-Software Co-Design: Seamless integration of the USRP X310 (handling digital baseband processing) with the custom analog optical front-end. • Compact and Practical: The system is designed for external mounting on vehicles, offering a practical solution for real-world deployment. • Simulation-Guided Design: Used LightTools for optical design and Optisystem for communication link simulation to validate the design before implementation. • Significance and Application Value • Solves Critical Challenges: Provides a high-speed, secure, and EMI-free communication alternative to traditional RF in environments like military operations, petroleum facilities, and intelligent transportation systems. • 6G Potential: Serves as a practical reference for the development of VLC as a complementary technology in 6G networks. • Demonstrates Feasibility: Successfully proves the viability of using commercial LEDs and USRP platforms for building high-performance, medium-to-long-range optical communication systems. • This work represents a significant step forward in practical high-speed VLC system design, combining theoretical innovation with robust engineering to achieve state-of-the-art performance. Existing vehicular VLC systems suffer from limited bandwidth, short transmission distances, low data rates, and support only a narrow range of communication services. To address these issues, this paper proposes a vehicle-mounted high-speed LED visible light communication (VLC) system based on Universal Software Radio Peripheral (USRP). Leveraging 64QAM-OFDM digital modulation, an improved USRP X310 hardware platform, and a PC, we establish a novel architecture comprising digital baseband and optical transceiver modules. The baseband module eliminates traditional spectrum-shifting circuits and antennas, retaining only FPGA and ADC/DAC units. Audio/video files undergo 64QAM-OFDM modulation directly on the PC, with modulated signals output via DAC to a custom-designed wide-bandwidth LED transceiver. A broadband hardware equalization network based on a fourth-order RC bypass circuit was designed expands the 3dB bandwidth of high-power LEDs from 3 MHz to 120 MHz. Combined with automatic gain control (AGC), this achieves an optical transceiver with 12–15 W output power, >23 dB optical modulation signal-to-noise ratio (SNR), and stable receiver output voltage (1.2–2.0 V). The resulting compact system delivers low latency, high data rates, and high reliability. Under aligned optical path conditions, the system achieves >1 Mbit/s at 110 m (BER 0.49 × 10⁻⁵, delay 0.009-0.05s) and a peak rate of 500 Mbit/s at 10 m (BER 7.4 × 10⁻⁵), with an 11.5° transmit angle and a receiver field of view (FOV) of less than 18°. This work demonstrates the feasibility of high-power LED-based 64QAM-OFDM communication using USRP X310 for medium- to long-range vehicular links, providing a reference for intelligent transportation systems.