Metaheuristic-based vector quantization approach: a new paradigm for neural network-based video compression

Diabetes Mellitus is a chronic, non-infectious disease that affects people’s health, which has a rapid onset trend with the continuous improvement of China’s economy and material life. At present, there is no practical solution to this condition. Diabetic retinopathy (DR) is the most important manifestation of diabetic microangiopathy, which can be divided into proliferative lesion and non-proliferative lesion. The traditional artificial diagnosis method has strong subjectivity and low accuracy. Because disease diagnosis can be regarded as a two-classification pattern recognition problem, the application of neural network method can provide the possibility for the application of artificial intelligence (AI) in disease-assisted diagnosis and treatment. Furthermore, it has significant meanings to find which kind of neural network has a better efficiency. In this paper, learning vector quantization (LVQ) neural network and back propagation (BP) neural network were used to diagnose diabetes and diabetic retinopathy with MATLAB and their recognition rate were compared. The datasets of diabetes and diabetic retinopathy were available in the UCI database. The experiment results were analyzed to evaluate the efficiency of each neural network classifier. The results demonstrate that both LVQ neural network and BP neural network can classify the two datasets effectively. However, compared with the LVQ neural network, the average accuracy rate and sensitivity of the BP neural network is higher.

Transformer inrush currents are high magnitude, harmonic-rich currents generated when transformer cores are driven into saturation during energization. In this paper an efficient method for detection of inrush current in distribution transformer based on wavelet transform is presented. Using this method inrush current can be discriminate from other transients such as capacitor switching, load switching and single phase to ground fault. Wavelet transform is used for decomposition of signals and Learning Vector Quantizer(LVQ) neural network used for classification. Inrush current data and other transients are obtained by simulation using EMTP program. Results show that the proposed procedure is efficient in identifying inrush current from other events.

Standard back propagation (BP) neural network has disadvantages such as slow convergence speed, local minimum and difficulty in definition of network structure. In this paper, an learning vector quantization (LVQ) neural network classifier is established, then it is applied in pattern classification of two-dimensional vectors on a plane. To test its classification ability, the classification results of LVQ neural network and BP neural network are compared with each other. The simulation result shows that compared with classification method based on BP neural network, the one based on LVQ neural network has a shorter learning time. Besides, its requirements for learning samples and the number of competing layers are also lower. Therefore it is an effective classification method which is powerful in classification of two-dimensional vectors on a plane.

The design of pattern classifiers such as multiprototype classifiers and neural network classifiers such as learning vector quantization and radial basis function neural networks requires reducing the size of the training data sets. In addition, memory storage, computation complexity and time, and data redundancy demand many pattern classifiers to use a smaller subset of a training data set. In this paper, we present a data reduction algorithm which automatically selects the subset of training data that faithfully represents the training data set for pattern classification. The applicability of this algorithm is demonstrated through k-nearest neighbor and learning vector quantization neural networks classifiers using both speech and synthetic data sets.

A learning vector quantization(LVQ) neural network classifier is for the first time applied for SAR data classification, of which the training termination rule is modified to make it have both the ability of classification and class signature analysis. A very high land cover classification accuracy is achieved. Especially under the condition that texture is considered, almost all roads can be classified correctly, which cannot be identified by BP MLP neural network and ML classifier.

The Raman spectra of tissue of 20 brain tumor patients was recorded using a confocal microlaser Raman spectroscope with 785 nm excitation in vitro. A total of 133 spectra were investigated. Spectra peaks from normal white matter tissue and tumor tissue were analyzed. Algorithms, such as principal component analysis, linear discriminant analysis, and the support vector machine, are commonly used to analyze spectral data. However, in this study, we employed the learning vector quantization (LVQ) neural network, which is typically used for pattern recognition. By applying the proposed method, a normal diagnosis accuracy of 85.7% and a glioma diagnosis accuracy of 89.5% were achieved. The LVQ neural network is a recent approach to excavating Raman spectra information. Moreover, it is fast and convenient, does not require the spectra peak counterpart, and achieves a relatively high accuracy. It can be used in brain tumor prognostics and in helping to optimize the cutting margins of gliomas.

Tractor condition recognition has important research value in helping to understand the operating status of tractors and the trend of tillage depth changes in the field. Therefore, this article presents a method for recognizing tractor conditions, providing the basis for establishing the relationship between tractor conditions and the tillage depth of the attached agricultural machinery. This study designed a tractor condition recognition method based on neural networks. Using real-world vehicle data to establish a data set, K-means clustering analysis was used to label the data set based on four conditions: “accelerated start”, “constant speed”, “decelerated stop” and “turning”. The learning vector quantization (LVQ) neural network and the VGG-16 model of a CNN were selected for use recognizing the tractor conditions. The results showed that both the neural networks had good recognition effects. The average accuracy rates of the VGG-16 model of CNN and LVQ neural network were 90.25% and 79.7%, respectively, indicating that these models could be applied to tractor condition recognition and provide theoretical support for the correction of angle detection errors.

It is an important part in aluminum electrolysis production to control the anode effect (AE). Since there are some shortcomings in traditional methods of anode effect prediction in aluminum electrolysis, this paper combined two methods, the slope of cell resistance and learning vector quantization (LVQ) neural network, to predict anode effect. First of all, the first prediction of anode effect will be conducted based on the slope of cell resistance. Afterwards, the inaccurate data are supposed to be re-predicted. The second prediction consists of two steps, one is to estimate the power spectrum from the signal of cell resistance by means of periodogram, the other is to re-predict the anode effect with the LVQ neural network, since the energy of frequency bands are served as the input feature variables of neural network, so as to raise the accuracy of prediction. It turned out that the success rate of ten-minute in advance prediction for anode effect can be above 85%, though just cell resistance signal is studied.

This paper proposes a framework for developing a broad variety of soft clustering and learning vector quantization (LVQ) algorithms based on gradient descent minimization of a reformulation function. According to the proposed axiomatic approach to learning vector quantization, the development of specific algorithms reduces to the selection of a generator function. A linear generator function leads to the fuzzy c-means (FCM) and fuzzy LVQ (FLVQ) algorithms while an exponential generator function leads to entropy constrained fuzzy clustering (ECFC) and entropy constrained LVQ (ECLVQ) algorithms. The reformulation of clustering and LVQ algorithms is also extended to supervised learning models through an axiomatic approach proposed for reformulating radial basis function (RBF) neural networks. This approach results in a broad variety of admissible RBF models, while the form of the radial basis functions is determined by a generator function. This paper shows that gradient descent learning makes reformulated RBF neural networks an attractive alternative to conventional feed-forward neural networks.

Compression of images process is a step in the image processing. It is concerned with the transmission and storage of digitally created images. Fractal coding is a potential image and video compression approach with good reconstruction fidelity and relatively large compression ratios, because of its simplicity and great performance; fractal image compression (FIC) is a particularly popular approach in image compression applications. However, it has a significant disadvantage in the form of a long encoding time. This is because encoding any small bit necessitates a massive similarity search in the original data As a result; the FIC search time is reduced while the quality of the reconstructed images is maintained acceptable level in many introduced paper and other still a study topic in progress. Fractal images are images that are self-similar in that each individual part is the same as the total. This paper will discusses many attempts for more author that working on image and video compression using fractal compression technique based on various approach and with each discuss focuses on the main parameter of compression such compression ratio (CR), peak signal to noise ratio (PSNR) and encoding time, as well as the details of data set the used for testing also writing with each technique to creating fractal video and image compression. Index Terms— FIC, Video compression, parallel processing, Iteration Function System (IFS), Image processing.

In modern world more image and video compression technologies improving gradually. But major barrier of the new technologies concepts are repeated from authors. Because authors can’t find in depth of the papers from various technologies. So Survey of Video Compression Techniques very helpful for these types problems in video compression areas. Video compression techniques such as DCT coding, Quantization, Entropy coding, Motion estimation are widely used in video compression techniques. The main focus of this paper is to analyse video compression techniques required for video processing especially to discover how much amount of data to compressed, which techniques is faster and visual quality better and so on. We evaluate the video compression techniques for finding compression ratio in terms of performance, speed and accuracy. We also compare video compression techniques with conventional methods.

Timely identification of the aging stage of the transformer can effectively ensure the safe operation of the transformer and prevent the aging fault of the transformer. This work proposes the aging diagnosis of transformer using the Raman spectroscopic recurrence plot combined with learning vector quantization (LVQ) neural network. Oil-paper insulation samples at different aging stages are obtained by accelerated thermal aging tests. Acquisition of Raman spectra of insulating oil is from 800 to 3000 cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">−1</sup> and converts to the Raman spectroscopic recurrence plot. The gray-level cooccurrence matrix (GLCM) is used to extract the characteristic information of the Raman spectroscopic recurrence plot. The optimal number of neurons in competitive layer of LVQ neural network is determined by the experimental method. A transformer aging diagnosis model based on the Raman spectroscopic recurrence plot is established. The results show that the diagnostic accuracy of the proposed diagnostic model reached 95%. The Raman spectroscopic recurrence plot has more abundant aging “fingerprint” characteristic information and the proposed diagnostic method shows potential for monitoring oil-paper insulation.

The current study presents the hard implementation methodology of a Learning Vector Quantization (LVQ) neural network on a Field Programmable Gate Array (FPGA) circuit specially suited for fast output applications. The implementation methodology is based on a mixed parallel sequential approach with the use of the L2 norm (Euclidian distance) to measure the distance between the reference vector and the prototype vector. The adopted architecture has been implemented on a device XCV1000 (FPGA Xilinx) and the given results have shown good performances in time, surface and consumption.

This paper introduces a modification on using active shape models (ASM) for automatic landmark detection in cephalometry. In first step, some feature points are extracted to model the size, rotation, and translation of skull. A learning vector quantization (LVQ) neural network is used to classify images according to their geometrical specifications. Using LVQ for every new image, the possible coordinates of landmarks are estimated. Then a modified ASM is applied and a principal component analysis (PCA) is incorporated to analyze each template. The local search to find the best match to the intensity profile is then used and every point is moved to get the best location. Finally a sub image matching procedure is applied to pinpoint the exact location of each landmark. On average 24 percent of the 16 landmarks are within 1 mm of correct coordinates, 61 percent within 2 mm, and 93 percent within 5 mm, which shows a distinct improvement on other proposed methods.

A multiple modified LVQ neural network model that can recognize Japanese characters over 3000 categories with high performance both in accuracy and speed is proposed. The multiple modified LVQ network is based on the LVQ (learning vector quantization) neural network and a large scale of network can be implemented easily because of its simple structure. This network has a training function of fast convergence and of easy modification without disturbing past trained weights for Japanese character recognition. An experimental system using a neuro-computer with four digital neuro-chips and experimental results are described. With the experimental system it takes 18 minutes to learn 35,000 samples by 20 training cycles, while it takes more than one week with a workstation. Moreover it can recognize about 350 characters a second for 3584 categories. High recognition rate of 100% for training fonts and of over 99% for testing fonts were achieved with 49,500 samples.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>