MIMO environmental capacity sensitivity

This chapter is attempted to provide a survey of the advanced concepts and related issues involved in Multiple Input Multiple Output (MIMO) systems. MIMO system technology has been considered as a really significant foundation on which to build the next and future generations of wireless networks. The chapter addresses advanced MIMO techniques such as polarization diversity and antenna selection. We gradually provide an overview of the MIMO features from basic to more advanced topics. The first sections of this chapter start by introducing the key aspects of theMIMO theory. TheMIMO systemmodel is first presented in a genericway. Then, we proceed to describe diversity schemes used in MIMO systems. MIMO technology could exploit several diversity techniques beyond the spatial diversity. These techniques essentially cover frequency diversity, time diversity and polarization diversity. We further provide the reader with a geometrically based models for MIMO systems. The virtue of this channel modeling is to adopt realisticmethods for modeling the spatio-temporal channel statistics from a physical wave-propagation viewpoint. Two classes for MIMO channel modeling will be described. These models involve the Geometry-based Stochastic ChannelModels (GSCM) and the Stochastic channel models. Besides the listedMIMO channel models already described, we derive and discuss capacity formulas for transmission over MIMO systems. The achieved MIMO capacities highlight the potential of spatial diversity for improving the spectral efficiency of MIMO channels. When Channel State Information (CSI) is available at both ends of the transmission link, the MIMO system capacity is optimally derived by using adaptive power allocation based on water-filling technique. The chapter continues by examining the combining techniques for multiple antenna systems. Combining techniques are motivated for MIMO systems since they enable the signal to noise ratio (SNR) maximization at the combiner output. The fundamental combing techniques are the Maximal Ratio Combining (MRC), the Selection Combining (SC) and the Equal Gain Combining(EGC). Once the combining techniques are analyzed, the reader is introduced to the beamforming processing as an optimal strategy for combining. The use of multiple antennas significantly improves the channel spectral efficiency. Nevertheless, this induces higher system complexity of the communication system and the communication system performance is effected due to correlation between antennas that need to be deployed at the same terminal. As such, the antenna selection algorithm for MIMO systems is presented. To elaborate on this point, we introduce Space time coding techniques for MIMO systems and we evaluate by simulation the performance of the communication system. Next, we emphasis on multi polarization techniques for MIMO systems. As a background, we presume that the reader has a thorough understanding of antenna theory. We recall the basic antenna theory and concepts that are used throughout the rest of the chapter. We rigorously introduce the 3D channel model over the Non-Line of Sight (NLOS) propagation channel for MIMO system with polarized antennas. We treat the depolarization phenomena and we study its effect on MIMO system capacity. The last section of the chapter provides a scenario for collaborative sensor nodes performing distributed MIMO system model which is devoted to sensor node localization in Wireless Sensor Networks. The localization algorithm is based on beamforming processing and was tested by simulation. Our chapter provides the reader by simulation examples for almost all the topics that have been treated for MIMO system development and key issues affecting achieved performance.

Wireless communication using multiple-input multiple-output (MIMO) systems enables increased spectral efficiency for a given total transmit power. Increased capacity is achieved by introducing additional spatial channels that are exploited using space-time coding. In this paper, the environmental factors that affect MIMO capacity are surveyed. These factors include channel complexity, external interference, and channel estimation error. The maximum spectral efficiency of MIMO systems in which both transmitter and receiver know the channel (using channel estimate feedback) is compared with MIMO systems in which only the receiver knows the channel. Channel complexity is studied using both simple stochastic physical scattering and asymptotic large random matrix models. Both uncooperative (worst-case) and cooperative (amenable to multiuser detection) interference are considered. An analysis for capacity loss associated with channel estimation error at the transmitter is introduced.

This paper reports on investigations into the effects of spatial correlation on channel estimation and capacity of a multiple input multiple output (MIMO) system. Minimum mean square error (MMSE) method is applied for channel estimation under a correlated channel scenario. Simulation results for a 4 times 4 MIMO system with the Jakes model describing a channel between a base station and a mobile station demonstrate a trade-off between the effects of spatial correlation, channel estimation and capacity. For low values of signal to noise ratio (SNR), spatial correlation decreases channel estimation errors and improves capacity. For high values of SNR, spatial correlation has a less pronounced effect on improving channel estimation and thus the MIMO capacity is adversely affected by the decreased channel matrix rank.

Multiple-input multiple-output (MIMO) has been accepted as a promising technology for its potential to achieve low bit error rate (BER) by space time coding [1] or to achieve large capacity by multiplexing [2]. MIMO multiplexing has been widely adopted to realize high speed data communications. The capacity of MIMO systems in the point-to-point transmission without external interferences has been studied in [3, 4] to show that large capacity can be achieved in a rich scattering environment. In a cellular environment, the same frequency/frequencies can be used in neighboring cells. As a result, co-channel interference exists and the channel between the base-station (BS) and the mobile-station (MS) is changed from noise-limited channel to interference-limited channel. Recently, the capacity of MIMO systems in the cellular environment has attracted much interest. Uplink (transmission from MS to BS) capacity with variable-rate transmissions is studied in [5]. By modeling the co-channel interference as additive white Gaussian noise (AWGN), the uplink capacity is also studied in [6, 7]. On the other hand, from the users’ stand point, the downlink capacity may be more interesting. However, the results for the downlink capacity of cellular MIMO systems presented in the literature are mainly based on the simulation results. Very detailed simulation results for the downlink MIMO capacity in 3G FDD WCDMA cellular systems can be found in [8]. By assuming single-frequency-reuse (the frequency reuse factor (FRF) equals to 1), the capacity of downlink cellular MIMO systems is studied by simulations and the results are presented in [9, 10]. These results are given in terms of the number of antennas, the modulation schemes, the propagation parameters as well as the cell size. However, FRFs other than 1 are not considered. By taking various FRFs into consideration, a comparative study on the capacity of cellular MIMO systems is presented in [11]. A comprehensive comparison between the capacity of SISO, SIMO, STBC-MISO and MIMO systems in a cellular environment is made based on the simulation results. In general, fixed FRF has been considered in cellular systems. It is reported in [12] that a flexible FRF may help to improve the capacity for cellular single antenna (SISO) systems. However, flexible design of FRF for cellular MIMO systems is rarely available in the literature. In this chapter, the downlink capacity of cellular MIMO systems is theoretically analyzed in terms of both the ergodic and outage capacities. The theoretical results of the best and worst situation capacities suggest that the greatest capacities may be achieved by using FRF 1 or FRF 3 adaptively according to the situations. Therefore, a hybrid frequency reuse scheme is

Consider a multiple input multiple output (MIMO) system with pulse amplitude modulation (PAM), where each transmit antenna is allowed to choose a different transmission delay. (We refer to this system as a MIMO system with asynchronous PAM.) Such MIMO systems have been studied before for increasing diversity and avoiding unintentional beamforming. We quantify the capacity/outage capacity improvement due to asynchronism and the corresponding spectral leakage (if any) for MIMO point-to-point and MIMO broadcast channels. We show that under commonly used transmitter spectral mask constraints, the channel has unbounded degrees of freedom. Synchronous PAM exploits only a finite number of these degrees of freedom, and asynchronism helps to improve capacity. For most cases of interest, two distinct shifts attain most of the capacity improvement. These gains are robust to interference from adjacent carriers. Analysis of the spectrum of the asynchronous PAM suggests that optimal water-filling based schemes are useful for improving capacity only in directional links due to possible spectral leakage, while uniform power allocation leads to capacity improvement without any extra spectral leakage.

Everyone in the world always wants to use a better wireless network which provide high capacity and high data rates. High data rates and capacity can be produce by Multiple Input Multiple Output(MIMO) systems. This paper mainly focused on MIMO systems because the MIMO systems have multiple number of antennas in transmitting and receiving end which can produce more data rates and capacity compared to SISO, SIMO, MISO systems. The multiple antennas allow MIMO systems to produce multiplexing gain and diversity gain. The capacity of MIMO systems will be increased by increased the number of antennas in transmitter and receiver end.

In conventional ways of fast responding and high performing model predictive control using Field Programmable Gate Arrays (FPGA), the approaches developed are applicable only to Single Input Single Output System (SISO). Many real time systems are Multiple Input Multiple Output (MIMO) systems and loop interaction is a major concern and has to be reduced in control of MIMO systems. Also, direct digital control with ability to solve the Quadratic Programming (QP) problem online, which can be applied to complex systems with fast response time and/or embedded applications and with limited computational resource for supervisory control approach, is required in many complex industrial MIMO systems. A novel direct digital control of Model predictive controller with FPGA for a MIMO system which considers and reduces loop interaction and which can also be implemented with very less investment is proposed here. The system was modeled from first principles and then simulated in Labview environment for MIMO system. Implementation of the system and response was verified for a stirred tank system. The proposed system has good performance in terms of reduction in loop interaction which is a major concern in implementation of controller for MIMO systems. Also, direct digital control of MIMO system instead of supervisory control was accomplished.

In this thesis we investigate the effects of the physical constraints such as antenna aperture size, antenna geometry and non-isotropic scattering distribution parameters (angle of arrival/departure and angular spread) on the performance of coherent and non-coherent space-time coded wireless communication systems. First, we derive analytical expressions for the exact pairwise error probability (PEP) and PEP upper-bound of coherent and non-coherent space-time coded systems operating over spatially correlated fading channels using a moment-generating function-based approach. These analytical expressions account for antenna spacing, antenna geometries and scattering distribution models. Using these new PEP expressions, the degree of the effect of antenna spacing, antenna geometry and angular spread is quantified on the diversity advantage (robustness) given by a space-time code. It is shown that the number of antennas that can be employed in a fixed antenna aperture without diminishing the diversity advantage of a space-time code is determined by the size of the antenna aperture, antenna geometry and the richness of the scattering environment. In realistic channel environments the performance of space-time coded multipleinput multiple output (MIMO) systems is significantly reduced due to non-ideal antenna placement and non-isotropic scattering. In this thesis, by exploiting the spatial dimension of a MIMO channel we introduce the novel use of linear spatial precoding (or power-loading) based on fixed and known parameters of MIMO channels to ameliorate the effects of non-ideal antenna placement on the performance of coherent and non-coherent space-time codes. The spatial precoder virtually arranges the antennas into an optimal configuration so that the spatial correlation between all antenna elements is minimum. With this design, the precoder is fixed for fixed antenna placement and the transmitter does not require any feedback of channel state information (partial or full) from the receiver. We also derive precoding schemes to exploit non-isotropic scattering distribution parameters of the scattering channel to improve the performance of space-time codes applied on MIMO systems in non-isotropic scattering environments. However, these schemes

Wireless communication using multiple-input multiple-output (MIMO) systems enables increased spectral efficiency for a given total transmit power. MIMO capacity is a strong function of the singular value distribution of the channel matrix, the receive antenna to transmit antenna transfer matrix. In this paper the capacity is calculated using an asymptotic large random matrix approach. Bounds on the maximum spectral efficiency of MIMO systems in which both transmitter and receiver know the channel (channel estimate feedback), are compared with MIMO systems in which only the receiver knows the channel. In addition, MIMO performance in the presence of cooperative and uncooperative interfering MIMO systems is presented.

The capacity of multiple-input multiple-output (MIMO) wireless communication systems over spatially correlated Rayleigh distributed flat fading channels with complex Gaussian additive noise is investigated. Specifically, the probability density function of the mutual information between transmitted and received complex signals of MIMO systems is derived. Using this density the closed-form ergodic capacity (mean), delay-limited capacity, capacity variance and outage capacity formulas for spatially correlated channels are derived and then these formulas are evaluated numerically. Numerical results show how the channel correlation degrades the capacity of MIMO communication systems. It is also shown that the density of mutual information of correlated/uncorrelated MIMO systems can be approximated by a Gaussian density with derived mean and variance, even for a finite number of inputs and outputs.

Recently, technological developments have enhanced, the use of Millimeter-wave (mm-Wave) Multiple Input Multiple Output (MIMO) system in various communication applications and wireless sensor networks as channel estimation efficiency can be immensely improved with the help of this technological developments in Millimeter-wave MIMO system and wireless sensor network as well. Moreover, they can improve quality of communication services to a great extent. However, cell interference in Millimeter-wave (mm-Wave) MIMO system can produce a massive impact on spectral efficiency. Therefore, a Routing Enabled Channel Estimation (RECE) technique is presented in this article to minimize interference between cells. The proposed Channel Estimation technique improves channel capacity as well as spectral efficiency. Moreover, Normalized Mean Square Error (NMSE) is minimized heavily using proposed RECE technique. Here, main aim of this article is to reduce cell interference and channel estimation inside a cell by using route selection, beam selection, and spatial frequency estimation. Here, different scenarios and parameters are considered to evaluate performance efficiency of proposed RECE technique in terms of spectral efficiency, NMSE and SNR and compared against varied traditional channel estimation techniques. Moreover, it is clearly evident from performance results that the proposed channel estimation technique performs better than the other two methods.

In recent years, multiple-input multiple-output (MIMO) systems, which use several transmit and receive antennas, have attracted much attention for high performance radio systems. In MIMO systems, the channel estimation is important to distinguish transmit signals from multiple transmit antennas. While the space-alternating generalized expectation-maximization (SAGE) algorithm is known to offer good channel estimation and data detection. We proposed earlier the minimum mean square error (MMSE)-based SAGE algorithm for MIMO systems where the MMSE estimation is used for channel estimation. We showed that the proposed MMSE-based SAGE algorithm can achieve the better bit error rate (BER) than the maximum likelihood (ML) detection with training symbols. The MMSE channel estimation needs the knowledge of the maximum Doppler frequency F <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">d</sub> for deriving the covariance matrix of the channel and the variance sigma <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> of additive white Gaussian noise (AWGN). Additionally, the computation of the MMSE channel estimation requires O(L <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> ) operations where L is the transmitted frame length. Thus, its computational complexity is high. In this paper, we propose a zero-forcing (ZF)-based SAGE algorithm for channel estimation and data detection in MIMO systems that does not need the knowledge of Fd and sigma <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> . Since the computation of the proposed ZF-based SAGE algorithm requires O(N <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> ) operations where N is the number of transmit antennas, its computational complexity is low. We show that the proposed ZF-based tracking SAGE algorithm with less computational complexity can achieve almost the same BER as that of the MMSE-based tracking SAGE algorithm

Model reference robust control (MRRC) is derived for MIMO systems that have a right Hermite normal form which is SPR and diagonal, and then for systems whose right Hermite normal form is diagonal but not SPR. It is shown that MRRC of multiple input multiple output (MIMO) systems is an extension of model reference control (MRC) of MIMO systems and MRRC of SISO systems. Unwanted coupling exists in many physical MIMO systems. The recursive backstepping procedure used in non-SPR SISO systems cannot be directly applied to diagonal MIMO non-SPR systems without the introduction of the augmented matrix or a precompensator. It is shown that MRRC decouples MIMO systems using only input and output measurements rather than state feedback.

This paper describes investigations into the antenna mutual coupling (MC) effect on channel estimation and capacity of a multiple-input multiple-output (MIMO) wireless communication system. The presented investigations close the gap existing in the previous works which assessed the effect of mutual coupling on MIMO capacity under the assumption of availability of perfect channel state information (CSI) at the receiver. The new approach assumes that the perfect CSI is not available due to channel estimation errors. The investigations are carried out for different spacing between array antenna elements producing a varying effect of mutual coupling on the channel estimation and the resulting MIMO channel capacity.

Physical limitations of the wireless medium create a technical challenge for reliable wireless communication. Moreover, the need for high-speed wireless Internet has led to the demand for technologies delivering higher capacities and link reliability than achieved by current systems. Multiple -input multiple-output (MIMO) based communication systems are capable accomplishing these objectives. Multiple input multiple output (MIMO) systems take advantage of spatial diversity obtained through the spatially separated antennas in a dense multipath scattering environment. Spatial diversity can increase the gain diversity consequently increase the reliability of the wireless link. Theoretical studies indicate that the capacity of MIMO systems grows linearly with the number of transmit antennas used. In this paper Space Time Coding techniques is covered which leads to much improvement in Symbol Error Rate within the same spectrum and bandwidth. Also a comparison is made between different modulation techniques.