Mobile Anchor Route Scheduling with an Iterative Sensor Positioning Algorithm in Wireless Sensor Networks

Most of the proposed algorithms focus on static networks of sensors with either static or mobile anchors, in which the Monte Carlo localization algorithm is a typical one for localizing nodes in a mobile wireless sensor network. But the radio range being all different or inconstant in this algorithm leads to reduce the accuracy of localization and the efficiency of the algorithm itself. In this article, we propose the novel rang-based stochastic Monte Carlo localization algorithm for wireless sensor networks specifically designed with mobility to improve the accuracy of localization by dealing with the different radio ranges of sensors, and being bound to the narrow sampling area. Our simulation experimental results show that the rang-based stochastic Monte Carlo localization algorithm has improved the accuracy and stability of the estimated locations.

Localization of mobile nodes in wireless sensor network gets more and more important, because many applications need to locate the source of incoming measurements as precise as possible. Many previous approaches to the location-estimation problem need know the theories and experiential signal propagation model and collect a large number of labeled samples. So, these approaches are coarse localization because of the inaccurate model, and to obtain such data requires great effort. In this paper, a semi-supervised manifold learning is used to estimate the locations of mobile nodes in a wireless sensor network. The algorithm is used to compute a subspace mapping function between the signal space and the physical space by using a small amount of labeled data and a large amount of unlabeled data. This mapping function can be used online to determine the location of mobile nodes in a sensor network based on the signals received. We use independent development nodes to setup the network in metallurgical industry environment, outdoor and indoor. Experimental results show that we can achieve a higher accuracy with much less calibration effort as compared with RADAR localization systems.

Identifying locations of sensor nodes in wireless sensor networks (WSNs) is significant for both network operations and most application level tasks. Although, geographical positioning system (GPS) based localization schemes are used for determining node locations but the cost of GPS devices and non-availability of GPS signals in indoor environments prevent their use in large scale WSNs. A substantial amount of research work exist that intend at obtaining precise and relative spatial locations of sensor nodes without requiring large amount of specialized hardware. Mobile anchor assisted localization is one typical approach that significantly reduces the implementation cost by using limited number of mobile anchors. In this survey, we present key issues and inherent challenges faced by the mobile anchor assisted localization techniques in WSNs. We take a closer look at the algorithmic approaches of various important fine-grained mobile anchor assisted localization techniques applicable in WSNs. In addition, we highlight the error refinement mechanisms adopted by the state-of-the-art works associated with their approaches. Well known mobile anchor trajectories presented in existing works are also reviewed. Finally, open research issues are discussed for future research scope in this field.

Automatic localization is one of the major issues in Wireless Sensor Networks (WSN). DV-hop algorithm is a well-known localization algorithm in WSN but with limited localization accuracy. In this paper, an improved DV-hop localization algorithm in hybrid optical wireless sensor networks is proposed based on the optimization of the parameters in WSN. Various factors that affect the localization accuracy of the DV-hop algorithm in WSN are investigated, including the communication radius of the node, the number of beacon nodes and the number of the total nodes. As the DV-hop algorithm is applied into hybrid optical sensor and WSNs (O-WSN) with rectangular topology, different parameters have to be optimized accordingly. Simulation results show that the square topology outperforms the rectangle topology more than 45 % under the same network parameters using the improved DV-hop algorithm. Therefore another improved DV-hop called Sub-Square Weighted DV-hop (SSW DV-hop) is proposed for the rectangle topology. Both simulation and experiment results demonstrate that applying the SSW DV-hop algorithmin O-WSNs could significantly improve the localization accuracy.

This paper aims to create a desirable positioning method for nodes in wireless sensor networks (WSNs). For this purpose, a source node positioning algorithm was developed based on time-of-arrival (TOA), in view of the nonlinear correlation between the measured values and unknown parameters in the observation equation of TOA source position. Several experiments were carried out to evaluate the performance of the proposed algorithm in terms of time measurement error, computing complexity, location error and Cramér–Rao lower bound (CRLB). The results show that the CRLB acquired by this algorithm can be used for WSN node positioning, provided that the independent zero mean Gauss measurement error is sufficiently small. The research findings lay a solid technical basis for optimal management, load balance, efficient routing, and automatic topology control of WSNs.

Profiling environmental parameter using a large number of spatially distributed wireless sensor network (WSN) NODEs is an extensive illustration of advanced modern technologies, but high power requirement for WSN NODEs limits the widespread deployment of these technologies. Currently, WSN NODEs are extensively powered up using batteries, but the battery has limitation of lifetime, power density, and environmental concerns. To overcome this issue, energy harvester (EH) is developed and presented in this paper. Solar-based EH has been identified as the most viable source of energy to be harvested for autonomous WSN NODEs. Besides, a novel chemical-based EH is reported as the potential secondary source for harvesting energy because of its uninterrupted availability. By integrating both solar-based EH and chemical-based EH, a hybrid energy harvester (HEH) is developed to power up WSN NODEs. Experimental results from the real-time deployment shows that, besides supporting the daily operation of WSN NODE and Router, the developed HEH is capable of producing a surplus of 971 mA·hr equivalent energy to be stored inside the storage for NODE and 528.24 mA·hr equivalent energy for Router, which is significantly enough for perpetual operation of autonomous WSN NODEs used in environmental parameter profiling.

Herein, an Internet of Things (IoT) system with remote reconfigurable wireless sensor network (WSN) nodes is presented and its application to measure group work activity in a classroom is discussed. This IoT system consists of wiki pages, bots, (defined as remotely controlled devices), gateways, and remotely reconfigurable WSN Nodes. The bots/gateways and WSN nodes of the IoT system are controlled by scripts written on wiki pages that are read by the bot/gateways, which then forward the commands contained in the scripts to the WSN nodes. Each WSN node then executes the commands, obtains the resulting sensor values, and then returns those values to the bot/gateways. The bot/gateways relay the values and write them onto the wiki page. Each WSN node is flexible and reconfigurable because its behavior can be changed by the script commands written onto the wiki page. Using this IoT system, we created a measurement system to evaluate activity levels of group work in a classroom. After developing the measurement system, we found it was possible to adjust the sampling rate for obtaining sensor values simply by rewriting the script on the wiki page without directly manipulating the WSN.

A survey on mobility-assisted localization techniques in wireless sensor networks

A scheme for WSNs (wireless sensor networks) security is given by dividing sensing tetrahedron into clusters and using the symmetric polynomials in this paper.The sensing tetrahedron is divided into a number of small grids.All those sensor nodes, both ordinary sensor nodes and heterogeneous sensor nodes are distributed in the sensing tetrahedron.In a grid, all ordinary sensor nodes and heterogeneous sensor nodes establish their shared keys through using the symmetric polynomials.All the heterogeneous sensor nodes establish their shared keys through using the symmetric polynomials.At last, all sensor nodes establish their keys directly or indirectly in the whole sensing tetrahedron.Analysis and comparison demonstrate this scheme enhances the WSN security, has good network connectivity, saves node storage, reduces network computing load, and extends the network lifetime.

To collect the data and transmit them on the base station is the main task of the sensor nodes in wireless sensor networks (WSNs). This transmission requires a specific routing algorithm. To prolong the network lifetime, sensor nodes need a secure load-balancing route. In this paper, we investigate the facts of ensuring secure sensed data in a balanced energy network backbone, and propose energy-efficient secure path algorithm (ESPA) for WSNs. It is a process of ensuring sensed data authenticity and integrity under a well-structured energy-efficient routing. To overcome the limitation caused by the symmetric key cryptography algorithms for securing data in WSNs, we proposed a mechanism for checking data integrity in a balanced energy network backbone. On this basis, we use the combined version of distance energy aware routing and a checking data integrity method for WSNs. ESPA provides a better performance in maximizing the network lifetime.

The wireless sensor networks (WSNs) are usually deployed among widely area for environmental monitoring, data collection and other applications. In order to reduce the energy consumption and extend the lifetime of WSNs, as well as receive the data quickly, a source-based data aggregation algorithm (SBDA) for clustering wireless sensor networks is proposed. The method aggregated the data from sensor nodes and marked different transmission priority for the data. Simulation results show that, compared to existing protocols, the proposed method achieves a longer life time, and a lower packet drop ratio.

Conventional IoT applications rely on seamless data collection from the distributed sensor nodes of Wireless Sensor Networks (WSNs). The energy supplied to the sensor node is limited and it depletes after each cycle of data collection. Therefore, data flow from the network to the base station may cease at any time due to the nodes with a dead battery. A replacement of the battery in WSNs is often challenging and requires additional efforts. To ensure the robust operation of WSNs, many fault recovery routing mechanisms have been proposed. Most of the previous fault recovery routing methods incur considerable delays in recovery and high overhead in either energy consumption or device cost. We propose an energy-efficient fail recovery routing method that is aimed to operate over a data aggregation network topology using a TDMA media access control (MAC). This paper introduces a novel fault recovery routing algorithm for TDMA-based WSNs. It finds an optimal neighbor backup parent (NBP) for each node in a way that reduces the energy consumption. The proposed method allows the NBPs to utilize the time slot of the faulty parent nodes, so it eliminates the overhead of TDMA rescheduling for NBPs. To evaluate the fault recovery performance and energy efficiency of the proposed method, we implemented it in C++ simulation program. Simulation experiments with an extensive set of network examples demonstrate that the proposed method can extend the network lifetime by 21% and reduce the energy consumption by 23% compared with the reference methods.

In the research on energy-efficient networking methods for precision agriculture, a hot topic is the energy issue of sensing nodes for individual wireless sensor networks. The sensing nodes of the wireless sensor network should be enabled to provide better services with limited energy to support wide-range and multi-scenario acquisition and transmission of three-dimensional crop information. Further, the life cycle of the sensing nodes should be maximized under limited energy. The transmission direction and node power consumption are considered, and the forward and high-energy nodes are selected as the preferred cluster heads or data-forwarding nodes. Taking the cropland cultivation of ginseng as the background, we put forward a particle swarm optimization-based networking algorithm for wireless sensor networks with excellent performance. This algorithm can be used for precision agriculture and achieve optimal equipment configuration in a network under limited energy, while ensuring reliable communication in the network. The node scale is configured as 50 to 300 nodes in the range of 500 × 500 m2, and simulated testing is conducted with the LEACH, BCDCP, and ECHERP routing protocols. Compared with the existing LEACH, BCDCP, and ECHERP routing protocols, the proposed networking method can achieve the network lifetime prolongation and mitigate the decreased degree and decreasing trend of the distance between the sensing nodes and center nodes of the sensor network, which results in a longer network life cycle and stronger environment suitability. It is an effective method that improves the sensing node lifetime for a wireless sensor network applied to cropland cultivation of ginseng.

Connected dominated subsets (CDS) of nodes in wireless sensor network are always selected to form a virtual backbone. Construction of r-hop 2-connected dominating sets can reduce the size of CDS and the total amount of information to be transmitted. The 2-connected properties can provide higher fault tolerance and robustness as well. In this paper an approximation r-hop 2-connected dominating set algorithm for wireless sensor and ad-hoc networks is presented. The main strategy is partition to three phases: in the first phase, an r-hop independent dominating set is established; in the second phase, the r-hop dominating set is interconnected successively to form a connected subgraph; in the third phase, more vertices are selected and added into dominating set to make it 2-connected. Extensive simulations according to the algorithm steps have been conducted. Performance with detailed analysis has been shown at last.

This paper presents a three-dimension localization algorithm for wireless sensor network (WSN) nodes based on support vector machine (SVM). First, distances between nodes to all anchor nodes in sensor network are estimated. Distance vectors are constructed in each node. Distance vectors in the anchor nodes are considered as training feature vectors for SVM and that in unknown nodes are regarded as testing feature vectors. The trained SVM is applied to class the distance vectors and locate cubic units for unknown nodes. Then, the unit centroids are used as the estimated locations of nodes. The experimental results indicate the algorithm proposed has small localization error and is insusceptible to the proportion of the anchor nodes and range error. Hence, the algorithm proposed is robust and stable, which can be applied in network environment where anchor nodes are sparse and range error is large.