Mobile-Sink Routing Algorithm Based on Energy and Distance for Wireless Sensor Networks

Wireless sensor networks area collection of a large number of unattended sensor nodes. The sensor nodes are dynamically deployed in the region. In wireless sensor networks, the unlicensed sensor nodes use their temporarily available vacant licensed channels or spectrum band in a telecommunication network. The many open challenges with issues such as adaptive in self-organisation, fault-tolerance and network scalability with cooperative spectrum sensing and sharing are identifying new challenges in wireless sensor networks. In this paper, we proposed the bio-inspired adaptive routing algorithm for cognitive radio wireless sensor networks. The utilisation of the foraging approach of ANTs and BEEs for making the decision of using the available spectrum sensing and sharing of channels over multi-hops communication, provides the method to utilise idle channel and decrease the delay for communication in wireless sensor network. In this paper, we design the algorithm to solve the issue of wireless sensor network and performance of classical routing protocol LEACH and cognitive radio sensor networks (CRSN) evaluates the parameters which proof the self-organisation routing algorithm.

Recently, network localization systems that are based on inter-node ranges have received significant attention. Geographic routing has been considered an application which can utilize the location information from these localization systems. In this paper, we firstly recognize that sensor network localization algorithms generate positioning data with different error patterns compared to those networks where node positions are determined directly from GNSS measurements. Secondly, by simulating practical sensor network scenarios using data from our localization algorithm, we observe that existing geographic routing algorithms in wireless sensor networks (WSNs) adopt very simplistic methods in the treatment of position error, without due consideration of error distribution. Additionally, an insight is given into localization algorithms for WSNs with inhomogeneous error environments. Our observations represent an initial step toward a detailed understanding and design of efficient geographic routing algorithms in location aware WSNs.


 
 
 Cluditem is a routing algorithm for wireless sensor networks developed for applications of environmental monitoring with periodic measurement of variables. These applications tolerate a maximum phase shift of the clocks of nodes in the order of milliseconds. This paper proposes two centralized synchronization schemes that introduce a limited processing load. The objective of the work was to assess the impact on the energy consumption of the incorporation of synchronization techniques described. Simulations of the full communication protocol were conducted in the NS2 environment and a comparative study of results was performed. This study showed that the first proposed schema is more convenient with respect to energy consumption, when the area to monitor has reduced dimensions. On the other hand, the second scheme, although it permits to work in larger areas, introduces a decrease in the network lifetime in the order of 14%.
 
 

Automatic localization is one of the major issues in Wireless Sensor Networks (WSN). DV-hop algorithm is a well-known localization algorithm in WSN but with limited localization accuracy. In this paper, an improved DV-hop localization algorithm in hybrid optical wireless sensor networks is proposed based on the optimization of the parameters in WSN. Various factors that affect the localization accuracy of the DV-hop algorithm in WSN are investigated, including the communication radius of the node, the number of beacon nodes and the number of the total nodes. As the DV-hop algorithm is applied into hybrid optical sensor and WSNs (O-WSN) with rectangular topology, different parameters have to be optimized accordingly. Simulation results show that the square topology outperforms the rectangle topology more than 45 % under the same network parameters using the improved DV-hop algorithm. Therefore another improved DV-hop called Sub-Square Weighted DV-hop (SSW DV-hop) is proposed for the rectangle topology. Both simulation and experiment results demonstrate that applying the SSW DV-hop algorithmin O-WSNs could significantly improve the localization accuracy.

Cluster based routing approaches have been researched extensively for saving energy of wireless sensor networks (WSNs). In a cluster based routing mechanism, cluster heads (CHs) cooperate mutually to forward their data to the base station (BS) through multi-hop fashion. Due to this process, CHs near to the BS loaded with huge relay traffic and tend to die quickly, which causes partition of the network is popularly known as a hot-spot problem. To tackle the hot-spot problem, in this paper, competitive swarm optimization (CSO) based algorithms have been proposed, jointly call these algorithms as CSO-UCRA (CSO based Unequal Clustering and Routing Algorithms). First, the CH selection algorithm has been presented which is based on CSO based technique, next assign the non-CH sensors to CHs based on the derived CHproficiency function. Finally, a CSO based routing algorithm has been presented. Efficient particle encoding schemes and novel fitness functions have been developed for these algorithms. The CSO-UCRA is simulated extensively with varying number of sensor nodes and CHs for various WSN scenarios, and the obtained results are compared with some recent devised algorithms and standard meta-heuristic based algorithm called PSO-UCRA to show the efficiancy in terms of various performance metrics. CSO-UCRA shows decreased energy consumption of 28.48%, 22.55%, 12.92%, and 3.81%, increased network lifetime of 56.92%, 46.02%, 26.2%, and 8.04% and increased data packets received 73%, 52.5%, 20.8%, and 6.18% over EBUC, EAUCF, EPUC and PSO-UCRA respectively.

LEACH routing algorithm is an important routing algorithm in wireless sensor networks (WSN s), There exist imperfections in the LEACH algorithm, which can be summarized as the uneven number of cluster heads, the unreasonable distribution of cluster heads and inappropriate selection of cluster heads. Researchers has put forward algorithms based on LEACH as improvement. In this paper, we focused on analysis of inappropriate selection of clusters in LEACH routing algorithm from energy consumption approach. To solve this existing issue in LEACH routing algorithm, a new algorithm that maximum the efficiency of energy consumption is proposed in this paper, which is LEACH-OptCluster. This paper analyses the disadvantages of LEACH routing algorithm. LEACH-C routing algorithm is introduced as comparison with proposed algorithm. Simulation of LEACH-OptCluster is conducted through Matlab. With simulation results, further analysis indicates the proposed LEACH-OptCluster routing algorithm can prolong the WSNs network working time effectively through balancing the overall energy consumption of network nodes.

Due to the limited energy of wireless sensor networks (WSN), lots of research works have been done with topology algorithm in WSN. To solve the problem of the unbalanced energy consumption and improve the life circle, this paper proposes an Improved Energy Efficient Unequal Clustering (IEEUC) algorithm based on node degree, the clusters closer to the base station have less members than the farther one. Thus cluster heads closer to the base station can preserve some energy for the inter-cluster data forwarding. Theoretic analysis and simulation results prove that the proposed algorithm can effectively balance the energy consumption and improve the lifetime of the networks.

Congestion control and energy consumption in Wireless Multimedia Sensor Network is a new research subject which has been ushered in through the introduction of multimedia sensor nodes that are capable of transmitting large volume of high bit rate heterogeneous multimedia data. Most of the existing congestion control algorithms for Wireless Sensor Networks do not discuss the impact of security attacks by the malicious nodes in network congestion. Sensor nodes are prone to failure and malicious nodes aggravate congestion by sending fake messages. Hence, isolation of malicious nodes from data routing path reduces congestion significantly. Considering that, we have proposed a new Trust Integrated Congestion Aware Energy Efficient Routing algorithm, in which malicious nodes are identified using the concept of trust. The parameter Node Potential is computed, on the basis of the trust value, congestion status, residual energy and the distance of the node from the base station, using Fuzzy Logic Controller. The source node selects the node with the highest potential in its one hop radio range for data transmission which is light weight as well as energy efficient. Finally, merits of the proposed scheme are discussed by comparing them with existing protocols and the study exhibits 25% improvements in network performance.

Routing algorithms for large-scale sensor networks should be capable of finding energy efficient paths to prolong the lifetime of the networks in a decentralized manner. With this respect, Ant System has several proper characteristics for routing algorithm in large-scale wireless sensor networks. First, its distributed mechanism enables routing algorithm to find a solution with only local information and be robust for uncertainties in wireless sensor networks. Second, the framework of the Ant System is proper to solve dynamic problems such as routing problem. Transition probability in Ant System can be used to estimate how good a given routing path is. Capturing these features, this work proposes two Ant Systems based routing algorithms, which are AS-RWSNs (Ant System for Routing in Wireless Sensor Networks) and SAAS-RWSN (Structure-Aware AS-RWSN). The AS-RWSN applies the original Ant System to routing algorithm for wireless sensor network and SAAS-RSN upgrades AS-RWSN with considering properties of network structure such as degree of node. In SAAS-RSN, sensors with high node degree have high data traffic since they have more routing paths. Consequently, SAAS-RSN achieves an energy balance over sensor network through this routing scheme. We demonstrate the effectiveness of the proposed algorithms by comparing three existing routing algorithms.

Recent years have witnessed a proliferation of routing algorithms for Wireless Sensor Networks (WSNs), hence complicating the choice of the proper algorithm to be used for a given application. Simulation frameworks represent a viable solution to anticipate crucial choices, however existing solutions do not encompass the impact of changes (e.g., route updates, node crashes) on the nodes behavior and vice-versa. This article proposes a novel adaptive modeling approach to master the complexity of the thorough simulation of routing algorithms for WSN. Experimental results are provided showing the effectiveness of the proposed approach at managing changes, and dealing with detailed aspects, during the simulation and comparison of several routing algorithms.

Popularity of Mobile Wireless Sensor Network (MWSN) has increased tremendously due to the ability to connect the physical world with the virtual world. In MWSN, Sensor nodes move freely in a target area without the need of any special infrastructure. MWSN has attracted many researchers as it has introduced unique challenges in aspects like resource management, coverage, routing protocols, security in many applications such as target tracking in military applications, detection of catastrophic events, environment monitoring, health applications etc. Due to mobility, routing process in MWSN has become more complicated as connections in the network can change dynamically. This paper proposes a Mobility-Aware Multi-Objective Hybrid Routing Algorithm (MMOHRA) for Wireless Sensor Network (WSN). MMOHRA selects the best route and forwards the data packets from source to sink using multiple metrics such as Average Energy consumption, Control Overhead, Reaction Time, LQI, and HOP Count. Performance of MMOHRA is compared with Simple Hybrid Routing Protocol (SHRP) and Dynamic Multi-objective Routing Algorithm (DyMORA) using metrics such as Average Energy Consumption, Packet Delivery Ratio, and Jitter. MMOHRA improves the Average Energy Consumption (AEC) by a factor of 14.1% as compared with SHRP and 8.13 % as compared to DyMORA. MMOHRA outperformed SHRP and DyMORA in terms of packet Delivery Ratio (PDR) by 10.17 % and 9.83 % respectively.

Energy balance is an important performance index in the design of routing algorithm for wireless sensor networks. A swarm intelligence optimization based routing algorithm for wireless sensor networks is proposed, whose kernel idea is taking less hop numbers into consideration and choosing the nodes with less pheromone as next hop to avoid some nodespsila prematurely exhausting their energy because of too concentrated routes through the nodes. The experiments show that the algorithm proposed in this paper is better than the directed diffusion routing protocol both in end-to-end delay and global energy balance and can effectively balance the global energy consumption and prolong the network lifetime.

Satisfying Quality of Service (QoS) requirements(e.g. bandwidth and delay constraints) for the different QoS based applications of WSNs raises significant challenges. Each algorithm that is used for packet routing in such applications should be able to establish tradeoffs between end to end delay parameter and energy consumption. Therefore, enabling QoS applications in sensor networks requires energy and QoS awareness in different layers of the protocol stack. In this paper, we propose a Reliable and QoS Aware Multipath routing algorithm in wireless sensor networks namely RQMP. This protocol uses control message together with a Forward Error Correction (FEC) technique to establish a reliable connection between source and destination. RQMP maximizes the network lifetime via data transmission across multiple paths as load balancing that causes energy consume uniformly throughout the network. RQMP uses the residual energy, available buffer size, Signal-to-Noise Ratio (SNR) and distance to sink to predict the best next hop through the paths construction phase. Also our proposed protocol employs a queuing model to handle both real time and non-real-time traffic. Simulation results show that our proposed protocol is more efficient than previous algorithms in providing QoS requirements and minimizing energy consumption.

A large number of small sensors in wireless sensor network are battery-powered; one of the most important design criteria for this type of network is energy efficiency. Clustering provides an effective way for extending the lifetime of a sensor network. In this paper, we propose a maximum-votes and load-balance clustering algorithm (VLCA) for wireless sensor network Each sensor collects votes from their neighbors and calculates the total vote received. The more votes a sensor accumulates, the more important it is in the whole network During the clustering phase, sensors compete with each other based on the total votes each has received. The algorithm is completely distributed, locating-unaware and independent of network size and topology. Simulation results show that our VLCA can reduce the number of clusters by 20-50% and prolong the lifetime of a sensor network.

Radio transmission and reception consumes a lot of energy in a wireless sensor network (WSN), which are made of low-cost, low-power, small in size, and multifunctional sensor nodes. Thus, one of the important issues in wireless sensor network is the inherent limited battery power within the sensor nodes. Therefore, battery power is crucial parameter in the algorithm design in maximizing the lifespan of sensor nodes. It is also preferable to distribute the energy dissipated throughout the wireless sensor network in order to maximize overall network performance. Much research has been done in recent years in the area of low power routing protocol, but, there are still many design options open for improvement, and for further research targeted to the specific applications, need to be done. In this paper, we propose a new approach of an energy-efficient homogeneous clustering algorithm for wireless sensor networks in which the lifespan of the network is increased by ensuring a homogeneous distribution of nodes in the clusters. In this clustering algorithm, energy efficiency is distributed and network performance is improved by selecting cluster heads on the basis of (i) the residual energy of existing cluster heads, (ii) holdback value, and (iii) nearest hop distance of the node. In the proposed clustering algorithm, the cluster members are uniformly distributed and the life of the network is further extended.