Model for power consumption of wireless access networks

This chapter is attempted to provide a survey of the advanced concepts and related issues involved in Multiple Input Multiple Output (MIMO) systems. MIMO system technology has been considered as a really significant foundation on which to build the next and future generations of wireless networks. The chapter addresses advanced MIMO techniques such as polarization diversity and antenna selection. We gradually provide an overview of the MIMO features from basic to more advanced topics. The first sections of this chapter start by introducing the key aspects of theMIMO theory. TheMIMO systemmodel is first presented in a genericway. Then, we proceed to describe diversity schemes used in MIMO systems. MIMO technology could exploit several diversity techniques beyond the spatial diversity. These techniques essentially cover frequency diversity, time diversity and polarization diversity. We further provide the reader with a geometrically based models for MIMO systems. The virtue of this channel modeling is to adopt realisticmethods for modeling the spatio-temporal channel statistics from a physical wave-propagation viewpoint. Two classes for MIMO channel modeling will be described. These models involve the Geometry-based Stochastic ChannelModels (GSCM) and the Stochastic channel models. Besides the listedMIMO channel models already described, we derive and discuss capacity formulas for transmission over MIMO systems. The achieved MIMO capacities highlight the potential of spatial diversity for improving the spectral efficiency of MIMO channels. When Channel State Information (CSI) is available at both ends of the transmission link, the MIMO system capacity is optimally derived by using adaptive power allocation based on water-filling technique. The chapter continues by examining the combining techniques for multiple antenna systems. Combining techniques are motivated for MIMO systems since they enable the signal to noise ratio (SNR) maximization at the combiner output. The fundamental combing techniques are the Maximal Ratio Combining (MRC), the Selection Combining (SC) and the Equal Gain Combining(EGC). Once the combining techniques are analyzed, the reader is introduced to the beamforming processing as an optimal strategy for combining. The use of multiple antennas significantly improves the channel spectral efficiency. Nevertheless, this induces higher system complexity of the communication system and the communication system performance is effected due to correlation between antennas that need to be deployed at the same terminal. As such, the antenna selection algorithm for MIMO systems is presented. To elaborate on this point, we introduce Space time coding techniques for MIMO systems and we evaluate by simulation the performance of the communication system. Next, we emphasis on multi polarization techniques for MIMO systems. As a background, we presume that the reader has a thorough understanding of antenna theory. We recall the basic antenna theory and concepts that are used throughout the rest of the chapter. We rigorously introduce the 3D channel model over the Non-Line of Sight (NLOS) propagation channel for MIMO system with polarized antennas. We treat the depolarization phenomena and we study its effect on MIMO system capacity. The last section of the chapter provides a scenario for collaborative sensor nodes performing distributed MIMO system model which is devoted to sensor node localization in Wireless Sensor Networks. The localization algorithm is based on beamforming processing and was tested by simulation. Our chapter provides the reader by simulation examples for almost all the topics that have been treated for MIMO system development and key issues affecting achieved performance.

In conventional ways of fast responding and high performing model predictive control using Field Programmable Gate Arrays (FPGA), the approaches developed are applicable only to Single Input Single Output System (SISO). Many real time systems are Multiple Input Multiple Output (MIMO) systems and loop interaction is a major concern and has to be reduced in control of MIMO systems. Also, direct digital control with ability to solve the Quadratic Programming (QP) problem online, which can be applied to complex systems with fast response time and/or embedded applications and with limited computational resource for supervisory control approach, is required in many complex industrial MIMO systems. A novel direct digital control of Model predictive controller with FPGA for a MIMO system which considers and reduces loop interaction and which can also be implemented with very less investment is proposed here. The system was modeled from first principles and then simulated in Labview environment for MIMO system. Implementation of the system and response was verified for a stirred tank system. The proposed system has good performance in terms of reduction in loop interaction which is a major concern in implementation of controller for MIMO systems. Also, direct digital control of MIMO system instead of supervisory control was accomplished.

This paper has proposed an adaptive antenna selection technique in multiple input multiple output (MIMO) system that optimizes the system energy efficiency to achieve maximum throughput. Though throughput increases with the dimension of MIMO system, the energy consumed per RF module is a major concern. The antenna selection technique exploits the channel state information (CSI) at transmitting end to reduce the number of RF module to achieve maximum benefit out of MIMO system. However, simultaneously achievement of best throughput and energy efficiency, with fixed number of transmitted antennas, is not possible. In this paper, the number of transmitting antenna to be selected is varied as per channel condition. The proposed technique aims to maximize the instantaneous throughput with optimum energy efficiency.

Modelling and optimization of power consumption in wireless access networks

Consider a multiple input multiple output (MIMO) system with pulse amplitude modulation (PAM), where each transmit antenna is allowed to choose a different transmission delay. (We refer to this system as a MIMO system with asynchronous PAM.) Such MIMO systems have been studied before for increasing diversity and avoiding unintentional beamforming. We quantify the capacity/outage capacity improvement due to asynchronism and the corresponding spectral leakage (if any) for MIMO point-to-point and MIMO broadcast channels. We show that under commonly used transmitter spectral mask constraints, the channel has unbounded degrees of freedom. Synchronous PAM exploits only a finite number of these degrees of freedom, and asynchronism helps to improve capacity. For most cases of interest, two distinct shifts attain most of the capacity improvement. These gains are robust to interference from adjacent carriers. Analysis of the spectrum of the asynchronous PAM suggests that optimal water-filling based schemes are useful for improving capacity only in directional links due to possible spectral leakage, while uniform power allocation leads to capacity improvement without any extra spectral leakage.

We propose a generalized framework for handling Multiple-Input Multiple-Output (MIMO) schemes defined within the context of the Third Generation Partnership Project (3GPP) physical layer specifications. A detailed review of all the multi-antenna transmission techniques adopted by the 3GPP so far is firstly presented, starting from the Global System for Mobile (GSM) communications and passing through the High-Speed Packet Access (HSPA) releases to the very recent Long Term Evolution (LTE)-Advanced standard. Motivated by the outcome of this overview, we introduce the Transmit Matrix (TRAM) concept, that can include as special cases several MIMO systems (e.g. transmit diversity, spatial-multiplexing, etc.) regardless of the presence or not of a feedback channel. Our approach is based on the adoption of a novel measure called Necessary Transmit Information (NTI) and on its one-to-one correspondence with the TRAM. The last allows for a convenient alternative representation of a TRAM-based MIMO system model and serves the straightforward construction of NTI-codebooks for a wide range of transmission schemes. The indicative applications provided reveal the universal nature of the proposed methodology.

The fifth generation cellular communication is all about high speed internet access with devices consuming less amount of power. Millimeter wave Multiple Input Multiple Output (MIMO) systems is a promising technology that offers high data rates due to a large bandwidth. These systems are compact with minimal antenna heights which allows us to deploy these systems more widely. The mm-Wave Massive MIMO systems enhances the data rates to a large extent. But due to the increasing number of antennas to support high data rates, the power consumption of the system goes high. In this paper, a limited channel state information (CSI) based precoding technique has been used to optimize the power consumption and to reduce the computational complexity of the system. The use of Hybrid Precoder architecture with sub array of precoding blocks helps in reducing the computational complexity by many folds. The conditional switching between two stages minimizes the number of computations required. The estimation of Angle of arrival (AoA) enables the precoder to steer the beam at the transmitter for higher throughput. The smart antenna selection algorithm optimizes the power consumption of the system. The two – staged precoding algorithm proposed employs all these techniques to optimize the performance of mm-Wave MIMO systems.

In order to satisfy constantly increasing user demands, in process of transition towards LTE (Long Term Evolution) mobile networks of 4th generation, for 3G UMTS networks potential solution is exploitation of multi-antenna MIMO (Multiple Input Multiple Output) systems, which provide increase in both capacity and reliability. This paper puts an effort to provide a link between link-level and system-level gains introduced by multi-antenna techniques in UMTS systems. Coverage, capacity and achievable data rates are evaluated and presented for Alamouti scheme, TxAA and D-TxAA. Radio mobile planning tool is used for illustration of coverage improvement achieved by implementation of several multi-antenna techniques. Considering system-level gains, it is seen that implementation of MIMO techniques yields larger service area and/or increase in capacity and available data rates maintaining the same bandwidth. Results presented in this paper help making a clear picture of achievable gains, employment costs and answering the question: Should mobile operators invest in upgrading their 3G networks with MIMO techniques and is that investment justified, considering achievable improvements.

Everyone in the world always wants to use a better wireless network which provide high capacity and high data rates. High data rates and capacity can be produce by Multiple Input Multiple Output(MIMO) systems. This paper mainly focused on MIMO systems because the MIMO systems have multiple number of antennas in transmitting and receiving end which can produce more data rates and capacity compared to SISO, SIMO, MISO systems. The multiple antennas allow MIMO systems to produce multiplexing gain and diversity gain. The capacity of MIMO systems will be increased by increased the number of antennas in transmitter and receiver end.

Long Term Evolution (LTE) and LTE-A researchers are deploying variety of techniques such as Multiple Inputs Multiple Outputs (MIMO) to achieve the higher throughput, while paying little attention to power consumption. In this paper, meticulous base station power consumption model is proposed, while more significantly, the model is calibrated. Then the relations between system parameters and power consumption of each sub-components is established, this energy consumption model and LTE system level simulation platform are integrated as a system level power consumption simulation platform. Two different base station energy saving technology applications are verified. Result shows 1.7 times EE improvement on average day utilizing the two schemes, while maximum EE increase per hour is 4.3 times.

The research of closed form expressions for the pdf of the lth ordered eigenvalue of a Wishart matrix has received a great attention in the past years owing to its applications in the performance analysis of multiple input multiple output (MIMO) systems in fading environments. Although several closed form expressions for this pdf were obtained in the past years, to the authors' knowledge, no one was very friendly for further analysis. We propose a methodology to obtain the pdf for the lth largest eigenvalue whose expression is given as a sum of terms xβe-xδ. This expression is easily usable to obtain closed form results for the performance of many MIMO systems, such as, for instance, MIMO beamforming, and MIMO with Singular Value Decomposition (SVD). The methodology is valid for both uncorrelated and correlated central Wishart, allowing the investigation of MIMO systems with uncorrelated and correlated Rayleigh fading. © 2008 IEEE.

Multiple Input Multiple Output (MIMO) low complexity receiver which utilizes the compressive sensing detection for Spatial Modulation in large scale MIMO system in order to reduce the system complexity. In conventional MIMO system; huge amount of antennas is used at both ends to exploit the multipath propagation. This system maximizes the throughput performance and data rates are increased but only at the cost of high hardware complexity and increased power-consumption. Spatial Modulation Matching Pursuit (SMMP) is the proposed enhanced CS technique used for the improvement of detection performance. Hence, this paper reviews recent research findings concerning normalized Compressive Sensing (CS) detection algorithm, used for Spatial Modulation (SM) in massive MIMO, to lowers the signal processing complexity, which in result improves the energy efficiency of system against that of conventional MIMO system.This strategy is achieved by involving additional structures and sparsity in which a single transmitter antenna or a subset of it is turned on at each case to transmit a certain data. The subset of antenna which is turned on for transmission depends on approaching data bits. Therefore, the total increase in the spectral efficiency of the system is given as base-two logarithm of whole antennas at the transmitter. It reduces the signal processing load at base station and doesn’t depend upon any synchronization between transmitters. The Spatial Modulation Matching Pursuit used prevents the Inter Channel Interference (ICI) of the system which in result improves the Bit Error Rate (BER) performance than the typical MIMO system.

Model reference robust control (MRRC) is derived for MIMO systems that have a right Hermite normal form which is SPR and diagonal, and then for systems whose right Hermite normal form is diagonal but not SPR. It is shown that MRRC of multiple input multiple output (MIMO) systems is an extension of model reference control (MRC) of MIMO systems and MRRC of SISO systems. Unwanted coupling exists in many physical MIMO systems. The recursive backstepping procedure used in non-SPR SISO systems cannot be directly applied to diagonal MIMO non-SPR systems without the introduction of the augmented matrix or a precompensator. It is shown that MRRC decouples MIMO systems using only input and output measurements rather than state feedback.

Wireless Sensor Network (WSN) is used in various applications. Sensors acquire samples of physical data and send them to a central node in different topologies to process the data and makes decisions. A main performance factor for WSN is the battery life that depends on energy consumption on the sensor. To reduce the energy consumption, an energy efficient transmission technique is required. Multiple Input Multiple Output (MIMO) systems showed good utilization of channel characteristics. This leads to enhance the transmission and hence reduce energy consumed by the sensor. In MIMO systems multiple signals are combined at the transmitter and transmitted using multiple antennas. This provides each receiver the whole combined signal and hence, array processing techniques helps in getting better performance. To further enhance the transmission of data, a Low Density Parity Check (LDPC) Coded MIMO wireless sensor network is proposed. The system implements space diversity through Multiple Antennas and temporal diversity through LDPC code and uses a clustering procedure to optimize the forming of the MIMO system. Results showed that, if the number of sensors is greater than the number of receiving antennas, time or frequency multiplexing is possible to keep good performance for the devised system. And by controlling the encoder we can create a temporal and spatial code among the transmitted signals enhancing the BER results in longer battery life at sensor nodes.

Multipath fading is one of the primary factors for degrading the performance in a wireless network. Information theoretic and past research suggest the use various diversity techniques to combat fading in wireless networks. Antenna diversity, a form of diversity technique, when incorporated in a wireless transceiver increases the system capacity and is one of the effective methods to combat fading in wireless systems. Also, recent research by Laneman et.al., Sendonaris et.al. suggests that cooperation among users in a wireless networks is an effective approach for a better signal reception in multipath fading environments. The diversity gains obtained by cooperation among the users of a wireless network is termed as cooperative diversity . Although, prior research in cooperative diversity considers users equipped with single antenna, in practical scenarios users may be able to accommodate multiple antennas due to the recent advanced research in semiconductor industry. Hence, the primary purpose of this thesis is to design, simulate and analyze an end-end performance of multi-antenna wireless systems employing cooperative multi antenna relay nodes so as to exploit the cooperative diversity and antenna diversity simultaneously in a wireless networks. Three main contributions to the area of cooperative multiple-input multiple-output (MIMO) wireless systems is presented in this thesis. First, we perform information theoretic analysis to study the impact of antenna arrays on cooperative wireless networks and propose the best possible distribution of antenna arrays among the three terminals of a simple three terminal cooperative relay network. Second, we design, simulate, and analyze a cooperative multiple-input multiple-output (MIMO) wireless systems employing orthogonal space-time block codes as proposed by Alamouti in 1998 with a decode-and-forward (DF) relay terminal. We implement a maximal ratio combining receiver that provides almost twice the diversity gain with respect to point-point multiple input multiple output link. Finally, we implement a practical receiver for cooperative reception using multiple antennas at all nodes based on Bell-Labs Layered Space Time architecture (BLAST). We incorporate a practical adaptive decode-and-forward (DF) relaying technique for reliable signal retransmission for both Alamouti space-time coding and the BLAST schemes. Results presented in terms of bit error rates and throughput show that remarkable performance gains are achievable by combining the concepts drawn from space-time coding, cooperative relaying and array processing.