Modelling of Wireless OFDM System with Deep Learning-based Modulation Detection

Machine Learning (ML) technologies have been widely used for blind signal classification problem (Modulation Classification) to automatically identify the modulation schemes of Radio Frequency (RF) signal from complex- valued IQ (In-phase Quadrature) samples. Traditional ML methods usually have two stages where the first stage is to manually extract the features of the IQ symbols by subject matter experts and the second stage is to feed the features to an ML algorithm (e.g., a support vector machine) to develop the classifier. The state- of-art technology is to apply Deep Learning (DL) technologies such as Convolutional Neural Network (CNN) or Recurrent Neural Network (RNN) directly to the complex-value IQ symbols to train a multi-class classifier. In this effort we are focused on the modulation and coding rate classification problems for multi-carrier Orthogonal Frequency-Division Multiplexing (OFDM) signals. The generated OFDM data set consists of over 480k instances across four different modulations and three different coding rates which include BPSK + 1=2, BPSK+3=4, QPSK+1=2, QPSK+3=4, QAM16+1=2, QAM16+3=4, QAM64+2=3 and QAM64+3=4. Deep Learning (DL) models can successfully catch the features of OFDM modulations and identify the modulation scheme from the baseband IQ symbols. Four DL models including Residual Neural Network 34(Resnet34), Resnet18, Squeezenet and Long Short-Term Memory (LSTM) trained over the data set can achieve over 94% overall accuracy for signals across 􀀀10dB to 10dB with step size of 4dB. Among them, Squeezenet and LSTM models have much smaller model sizes which can be easily loaded in resource-limited edge computing platforms. To the best of our knowledge, coding rate classification of OFDM signals has not been studied in previous works. Therefore, three different DL models including a single-stage coding rate classifier, a combination of modulation and coding rate classifier, and a two-stage coding rate classifier are developed to identify the coding rate. However, coding rates can only be identified for low-order modulation schemes BPSK and QPSK but not for high-order modulation schemes QAM16 and QAM64. Further investigation is needed to understand the coding rate classification for high-order QAM signals.

Convolutional Neural Networks (CNNs) are one of the most successful deep machine learning technologies for processing image, voice and video data. CNNs require large amounts of processing capacity and memory, which can exceed the resources of low power mobile and embedded systems. Several designs for hardware accelerators have been proposed for CNNs which typically contain large numbers of Multiply Accumulate (MAC) units. One approach to reducing data sizes and memory traffic in CNN accelerators is "weight sharing", where the full range of values in a trained CNN are put in bins and the bin index is stored instead of the original weight value. In this paper we propose a novel MAC circuit that exploits binning in weight-sharing CNNs. Rather than computing the MAC directly we instead count the frequency of each weight and place it in a bin. We then compute the accumulated value in a subsequent multiply phase. This allows hardware multipliers in the MAC circuit to be replaced with adders and selection logic. Experiments show that for the same clock speed our approach results in fewer gates, smaller logic, and reduced power.

This review paper examines the current state of lung disease diagnosis based on deep learning (DL) methods. Lung diseases, such as Pneumonia, TB, Covid-19, and lung cancer, are significant causes of morbidity and mortality worldwide. Accurate and timely diagnosis of these diseases is essential for effective treatment and improved patient outcomes. DL methods, which utilize artificial neural networks to extract features from medical images automatically, have shown great promise in improving the accuracy and efficiency of lung disease diagnosis. This review discusses the various DL methods that have been developed for lung disease diagnosis, including convolutional neural networks (CNNs), deep neural networks (DNNs), and generative adversarial networks (GANs). The advantages and limitations of each method are discussed, along with the types of medical imaging techniques used, such as X-ray and computed tomography (CT). In addition, the review discusses the most commonly used performance metrics for evaluating the performance of DL for lung disease diagnosis: the area under the curve (AUC), sensitivity, specificity, F1-score, accuracy, precision, and the receiver operator characteristic curve (ROC). Moreover, the challenges and limitations of using DL for lung disease diagnosis, including the limited availability of annotated data, the variability in imaging techniques and disease presentation, and the interpretability and generalizability of DL models, are highlighted in this paper. Furthermore, strategies to overcome these challenges, such as transfer learning, data augmentation, and explainable AI, are also discussed. The review concludes with a call for further research to address the remaining challenges and realize DL's full potential for improving lung disease diagnosis and treatment.

According to a recently conducted survey on surgical complication mortality rate, 47% of such cases are due to anesthetics overdose. This indicates that there is an urgent need to moderate the level of anesthesia. Recently deep learning (DL) methods have played a major role in estimating the depth of Anesthesia (DOA) of patients and has played an essential role in control anesthesia overdose. In this paper, Electroencephalography (EEG) signals have been used for the prediction of DOA. EEG signals are very complex signals which may require months of training and advanced signal processing techniques. It is a point of debate whether DL methods are an improvement over the already existing traditional EEG signal processing approaches. One of the DL algorithms is Convolutional neural network (CNN) which is very popular algorithm for object recognition and is widely growing its applications in processing hierarchy in the human visual system. In this paper, various decomposition methods have been used for extracting the features EEG signal. After acquiring the necessary signals values in image format, several CNN models have been deployed for classification of DOA depending upon their Bispectral Index (BIS) and the signal quality index (SQI). The EEG signals were converted into the frequency domain using and Empirical Mode Decomposition (EMD), and Ensemble Empirical Mode Decomposition (EEMD). However, because of the inter mode mixing observed in EMD method; EEMD have been utilized for this study. The developed CNN models were used to predict the DOA based on the EEG spectrum images without the use of handcrafted features which provides intuitive mapping with high efficiency and reliability. The best trained model gives an accuracy of 83.2%. Hence, this provides further scope and research which can be carried out in the domain of visual mapping of DOA using EEG signals and DL methods.

Deep learning algorithms can be used to design systems that report data on patients and deliver warnings to medical applications or electronic health information if there are changes in the patient's health. These systems could be created using deep Learning. This helps verify that patients get the proper effective care at the proper time for each specific patient. A healthcare decision support system was presented using the Internet of Things and deep learning methods. In the proposed system, we examined the capability of integrating deep learning technology into automatic diagnosis and IoT capabilities for faster message exchange over the Internet. We have selected the suitable Neural Network structure (number of best-hidden layers and activation function classes) to construct the e-health system. In addition, the e-health system relied on data from doctors to understand the Neural Network. In the validation method, the total evaluation of the proposed healthcare system for diagnostics provides dependability under various patient conditions. Based on evaluation and simulation findings, a dual hidden layer of feed-forward NN and its neurons store the tanh function more effectively than other NN. To overcome challenges, this study will integrate artificial intelligence with IoT. This study aims to determine the NN's optimal layer counts and activation function variations.

Sentiment analysis is a subfield of Natural Language Processing (NLP) which tries to process a text to extract opinions or attitudes towards topics or entities. Recently, the use of deep learning methods for sentiment analysis has received noticeable attention from researchers. Generally, different deep learning methods have shown superb performance in sentiment analysis problem. However, deep learning models are different in nature and have different strengths and limitations. For example, convolutional neural networks are useful for extracting local structures from data, while recurrent models are able to learn order dependence in sequential data. In order to combine the advantages of different deep models, in this paper we have proposed a novel approach for aspect-based sentiment analysis which utilizes deep ensemble learning. In the proposed method, we first build four deep learning models, namely CNN, LSTM, BiLSTM and GRU. Then the outputs of these models are combined using stacking ensemble approach where we have used logistic regression as meta-learner. The results of applying the proposed method on the real datasets show that our method has increased the accuracy of aspect-based prediction by 5% to 20% compared to the basic deep learning methods.

Automatic modulation classification (AMC) plays an important role in many fields to identify the modulation type of wireless signals. In this paper, we introduce deep learning to signal recognition. Based on architecture analysis of the convolutional neural network (CNN), we used real signal data generated by instruments as dataset, and proposed an improved CNN architecture to achieve compatible recognition accuracy of modulation classification. According to various conditions of signal noise ratio (SNR), we test the proposed CNN architecture with the real sampled signals. Experiments results show that the high-layer network is not necessary for modulation recognition with high SNR signals. The proposed CNN architecture has higher average classification accuracy than RESNET and is more compatible for modulation classification of signals with lower SNR.

Excessive withdrawal of groundwater for agricultural irrigation can cause seawater intrusion into coastal aquifers. Such a case will in turn results in deterioration of irrigation water quality. Determination of irrigation water quality with traditional methods is a time-consuming and costly process. However, machine learning algorithms can be useful tools for modeling and estimating groundwater quality used for irrigation water purposes. In this study, TDS, PS, SAR, and Cl parameters of groundwater were estimated with models based on EC and pH variables. For this purpose, prediction performances of two different deep learning methods (convolutional neural network (CNN) and deep neural network (DNN)) and two different classical machine learning (Random Forest (RF) and extreme gradient boosting (XGBoost)) methods were compared. In addition, predictive uncertainty of the models was determined by quantile regression (QR) analysis. Performance criteria and results of uncertainty analysis revealed that CNN (in testing phase, NSE = 0.95 for TDS, NSE = 0.96 for PS, NSE = 0.67 for SAR and NSE = 0.93 for CI) and DNN (in testing phase, NSE = 0.91 for TDS, NSE = 0.91 for PS, NSE = 0.57 for SAR and NSE = 0.94 for Cl) models had quite a close performance in estimation of TDS, PS, SAR, and Cl parameters and higher than the other two classical machine learning methods. As a result, the CNN model can be considered the best performing model in estimating all quality parameters due to the highest NSE and lowest RMSE values. In addition, the Taylor diagram showed that the values estimated using the CNN model had the highest correlation with the measured data. It was determined that the model with the lowest uncertainty based on the PICP statistics was DNN, followed by the CNN model. However, the CNN model has predicted outliers more accurately. Present findings proved that deep learning models could offer efficient tools for predicting irrigation water quality parameters.

Due to the complexity of medical images, traditional medical image classification methods have been unable to meet the actual application needs. In recent years, the rapid development of deep learning theory has provided a technical approach for solving medical image classification. However, deep learning has the following problems in the application of medical image classification. First, it is impossible to construct a deep learning model with excellent performance according to the characteristics of medical images. Second, the current deep learning network structure and training strategies are less adaptable to medical images. Therefore, this paper first introduces the visual attention mechanism into the deep learning model so that the information can be extracted more effectively according to the problem of medical images, and the reasoning is realized at a finer granularity. It can increase the interpretability of the model. Additionally, to solve the problem of matching the deep learning network structure and training strategy to medical images, this paper will construct a novel multiscale convolutional neural network model that can automatically extract high-level discriminative appearance features from the original image, and the loss function uses the Mahalanobis distance optimization model to obtain a better training strategy, which can improve the robust performance of the network model. The medical image classification task is completed by the above method. Based on the above ideas, this paper proposes a medical classification algorithm based on a visual attention mechanism-multiscale convolutional neural network. The lung nodules and breast cancer images were classified by the method in this paper. The experimental results show that the accuracy of medical image classification in this paper is not only higher than that of traditional machine learning methods but also improved compared with other deep learning methods, and the method has good stability and robustness.

Deep learning (also known as deep structured learning, hierarchical learning, or deep machine learning) is a branch of machine learning based on a set of algorithms that attempt to model high-level abstractions in data by using a deep graph with multiple processing layers, composed of multiple linear and nonlinear transformations. Deep learning has been characterized as a class of machine learning algorithms with the following characteristics [257]: • They use a cascade of many layers of nonlinear processing units for feature extraction and transformation. Each successive layer uses the output from the previous layer as input. The algorithms may be supervised or unsupervised and applications include pattern analysis (unsupervised) and classification (supervised). • They are based on the (unsupervised) learning of multiple levels of features or representations of the data. Higher-level features are derived from lower-level features to form a hierarchical representation. • They are part of the broader machine learning field of learning representations of data. • They learn multiple levels of representations that correspond to different levels of abstraction; the levels form a hierarchy of concepts. These definitions have in common: multiple layers of nonlinear processing units and the supervised or unsupervised learning of feature representations in each layer, with the layers forming a hierarchy from low-level to high-level features. Various deep learning architectures such as deep neural networks, convolutional deep neural networks, deep belief networks (DBN), and recurrent neural networks have been applied to fields like computer vision, automatic speech recognition, natural language processing, audio recognition, and bioinformatics where they have been shown to produce state-of-the-art results on various tasks. In this chapter we start in Section 7.1 with an introduction, giving a brief history of this field, the relevant literature, and its applications. Then we study some basic concepts of deep learning such as convolutional neural networks, recurrent neural networks, backpropagation algorithm, restricted Boltzmann machines, and deep learning networks in Section 7.2. Then we illustrate three examples for Apache Spark implementation for mobile big data (MBD), user moving pattern extraction, and combination with nonparametric Bayesian learning, respectively, in Sections 7.3 through 7.5. Finally, we have summary in Section 7.6.

Osteochondrodysplasia, affecting 2–3% of newborns globally, is a group of bone and cartilage disorders that often result in head malformations, contributing to childhood morbidity and reduced quality of life. Current research on this disease using mouse models faces challenges since it involves accurately segmenting (precisely delineating) the developing cartilage in 3D micro-CT images of embryonic mice. Tackling this segmentation task with deep learning (DL) methods is laborious due to the big burden of manual image annotation, expensive due to the high acquisition costs of 3D micro-CT images, and difficult due to embryonic cartilage’s complex and rapidly changing shapes. While DL approaches have been proposed to automate cartilage segmentation, most such models have limited accuracy and generalizability, especially across data from different embryonic age groups. To address these limitations, we propose novel DL methods that can be adopted by any DL architectures—including Convolutional Neural Networks (CNNs), Transformers, or hybrid models—which effectively leverage age and spatial information to enhance model performance. Specifically, we propose two new mechanisms, one conditioned on discrete age categories and the other on continuous image crop locations, to enable an accurate representation of cartilage shape changes across ages and local shape details throughout the cranial region. Extensive experiments on multi-age cartilage segmentation datasets show significant and consistent performance improvements when integrating our conditional modules into popular DL segmentation architectures. On average, we achieve a 1.7% Dice score increase with minimal computational overhead and a 7.5% improvement on unseen data. These results highlight the potential of our approach for developing robust, universal models capable of handling diverse datasets with limited annotated data, a key challenge in DL-based medical image analysis.

Deep learning methods have become popular among researchers in the field of fault detection. However, their performance depends on the availability of big datasets. To overcome this problem researchers started applying transfer learning to achieve good performance from small available datasets, by leveraging multiple prediction models over similar machines and working conditions. However, the influence of negative transfer limits their application. Negative transfer among prediction models increases when the environment and working conditions are changing continuously. To overcome the effect of negative transfer, we propose a novel deep transfer learning method, coined deep boosted transfer learning, for wind turbine gearbox fault detection that prevents negative transfer and only focuses on relevant information from the source machine. The proposed method is an instance-based deep transfer learning method that updates the weights of the source and the target machine training samples separately. The weights of different source training samples are gradually decreased to reduce the impact on the final model. The proposed method is verified by the Case Western Reserve University bearing and real field wind farm datasets. The results show that the proposed method ignores negative transfer and achieves higher accuracy compared to standard deep learning and deep transfer learning methods.

In this paper, we develop a method based on a deep learning method in financial market prediction, which includes BRICS economies as the test cases. Financial markets are rife with volatility that is affected by a "bed of complexity," coddled by local and distal factors. To leverage these vast datasets both deep learning models such as Convolutional Neural Networks (CNNs), Long Short Term Memory (LSTM) networks as well as hybrid architectures are used in this study. The paper evaluates the predictive accuracy of the models, and by so doing, identifies their strengths in predicting temporal dependencies and intricate market patterns. In particular, deep learning techniques are applied to case studies of individual countries in the BRICS to highlight the application of deep learning to disparate country specific problems, such as liquidity crises and market shocks. These findings show that classical statistical methods are outperformed by deep learning systems in a precise and reliable financial forecasting. This research highlights the ability of AI driven systems to change financial decision making processes, improving investor confidence and improving economic stability in BRICS nations. This study also readers the value of deep learning in financial market analysis, especially in economies in the developing countries. Application of techniques and architectures e.g. Convolutional Neural Networks (CNNs) that excel at identifying spatial patterns, and Long Short-Term Memory (LSTM) networks renowned for their prowess on sequential and time series data, for real world market prediction are explained. In addition, the research discusses hybrid architectures which extend knowledge, fusing strengths of both architectures to improve prediction accuracy and how deep learning develops to solve particular financial challenges. Through reading these notes readers get exposed to data preprocessing techniques such as normalization and feature selection which are important for boosting deep learning performance. The paper also includes an introduction to the evaluation of models using MSE and R-squared values for validating them in terms of reliable outputs. This research combines deep learning theory and practical case study to offer a useful educational resource for students, researchers, and practitioners who want to apply AI in financial forecasting in complex and dynamic global markets.

Due to the complexity of medical images, traditional medical image classification methods have been unable to meet actual application needs. In recent years, the rapid development of deep learning theory has provided a technical approach for solving medical image classification tasks. However, deep learning has the following problems in medical image classification. First, it is impossible to construct a deep learning model hierarchy for medical image properties; second, the network initialization weights of deep learning models are not well optimized. Therefore, this paper starts from the perspective of network optimization and improves the nonlinear modeling ability of the network through optimization methods. A new network weight initialization method is proposed, which alleviates the problem that existing deep learning model initialization is limited by the type of the nonlinear unit adopted and increases the potential of the neural network to handle different visual tasks. Moreover, through an in‐depth study of the multicolumn convolutional neural network framework, this paper finds that the number of features and the convolution kernel size at different levels of the convolutional neural network are different. In contrast, the proposed method can construct different convolutional neural network models that adapt better to the characteristics of the medical images of interest and thus can better train the resulting heterogeneous multicolumn convolutional neural networks. Finally, using the adaptive sliding window fusion mechanism proposed in this paper, both methods jointly complete the classification task of medical images. Based on the above ideas, this paper proposes a medical classification algorithm based on a weight initialization/sliding window fusion for multilevel convolutional neural networks. The methods proposed in this study were applied to breast mass, brain tumor tissue, and medical image database classification experiments. The results show that the proposed method not only achieves a higher average accuracy than that of traditional machine learning and other deep learning methods but also is more stable and more robust.

A hybrid speckle noise reduction method is proposed in this paper, which is a combination of OBNLM and deep CNN filters for better accuracy. Now-a-days polycystic ovary syndrome ultrasonic images be effecting through speckle noise. Speckle noise is the greatly affected noises in the ultrasonic images furthermore it is not easy to remove. In this paper, we are eliminating this speckle noise, which is the pre-processing step in image processing. The first step in pre-processing, which employs OBNLM (Optimized Bayesian Non-Local Means) filter and later CNN (Convolution Neural Networks). Here OBNLM filter is applied first and its output is given as input to CNN, generates a denoised image. The OBNLM provides a very strong filter for despeckling of Ultrasound images. CNN is an efficient method in deep learning, used also for noise reduction in ultrasound images. This work generates a denoising solution using the adaptive OBNLM filter in combination with the deep learning technique, which yields high performance. The performance of OBNLM, CNN and hybrid filter is measured using PSNR and SSIM.