Molecular nanomagnets with switchable coupling for quantum simulation.

Besides noticeable challenges in implementing low-error single- and two-qubit quantum gates in superconducting quantum processors, the readout technique and analysis are a key factor in determining the efficiency and performance of quantum processors. Being able to efficiently implement quantum algorithms involving entangling gates and asses their output is mandatory for quantum utility. In a transmon-based 5-qubit superconducting quantum processor, we compared the performance of quantum circuits involving an increasing level of complexity, from single-qubit circuits to maximally entangled Bell circuits. This comparison highlighted the importance of the readout analysis and helped us optimize the protocol for more advanced quantum algorithms. Here, we report the results obtained from the analysis of the outputs of quantum circuits using two readout paradigms, referred to as “multiplied readout probabilities” and “conditional readout probabilities.” The first method is suitable for single-qubit circuits, while the second is essential for accurately interpreting the outputs of circuits involving two-qubit gates.

Unlike classical digital computers in which a bit can represent either 1 or 0 at any time, quantum computers use a two-level system, i.e., a qubit, to implement logical operations based on quantum mechanical laws, which can represent both values at once. Owing to the superposition property of qubits, quantum computers have natural parallel processing advantages and thus have potential to exceed the computational efficiency of classical computers for particular tasks. Quantum logic gates are the generalization of classical logic gates in computational networks. It has been proved that two-qubit quantum gates together with one-qubit quantum gates are adequate for constructing networks with any possible quantum computational property. Directional couplers are the most critical elementsfor constructing the quantum gates. In recent years, photonic quantum technologies have emerged as a promising experimental platform for quantum computing. Single photons have robust noise resistance, long coherence time, high transmission speed and great compatibility with other systems. They can be easily manipulated and encoded in any of several degrees of freedom, for example, polarization, path, spatial mode or time bin. Optical waveguide technology enables the realizing of complex optical schemes comprised of many elements with desired scalability, stability and miniaturization. Femtosecond laser direct writing of waveguide has been adopted as a powerful tool for integrated quantum photonics with characteristics of rapidness, cost-effectiveness, mask-less and single-step process. In particular, it has the ability to build arbitrary three-dimensional circuits directly inside bulk materials, which is impossible to achieve with conventional lithography. In this article we review the femtosecond laser writing and quantum characterization of directional coupler and important one-qubit and two-qubit optical quantum logic gates, such as Hadamard gate, Pauli-X gate, controlled-NOT gate, and controlled-Phase gate. The qubits in these gates are usually encoded through optical paths or polarizations of photons. The key to the realization of polarization-encoded one-qubit gates is to achieve flexible wave-plate operations, which is described in detail. Controlled-NOT gate and controlled-phase gate are the most crucial two-qubit gates in the linear optics computation and sometimes they can be converted into each other by adding some one-qubit gates or special superposition states. Many different kinds of waveguide circuits have been used to implement these two-qubit gates. The outlook and challenges for the femtosecond laser writing of three-qubit gates, such as Toffoli gate and Fredkin gate, are briefly introduced.

In NMR quantum computing, spin states of spin-1/2 nuclei are called qubits. Quantum logic gates are represented by unitary matrices. As a universal gate, controlled-NOT (CNOT) is a two-qubit gate. For the IS (I = 1/2 and S = 1/2) spin system, two-qubit CNOT gate is represented by a 4 × 4 matrix. SWAP logic gate, which exchanges two quantum states, is constructed by CNOT gates. In this study, first, four-qubit CNOT gates are constructed for the IS (I = 3/2, S = 3/2) spin system. Then, by using these CNOT gates, a four-qubit SWAP logic gate is found. As an application and verification, an obtained SWAP logic gate is applied to the matrix representation of product operators for the IS (I = 3/2, S = 3/2) spin system. SWAP logic gate can also be presented by an NMR pulse sequence. By using the product operator theory, the pulse sequence of the SWAP logic gate is applied to product operators of the IS (I = 3/2, S = 3/2) spin system. The expected exchange results are obtained for both the matrix representation and the pulse sequence of SWAP logic gate.

Quantum lower bounds for the Goldreich–Levin problem

We propose a two-qubit quantum logic gate between a superconducting atom and a propagating microwave photon. The atomic qubit is encoded on its lowest two levels and the photonic qubit is encoded on its carrier frequencies. The gate operation completes deterministically upon reflection of a photon, and various two-qubit gates (SWAP, $\sqrt{\rm SWAP}$, and Identity) are realized through {\it in situ} control of the drive field. The proposed gate is applicable to construction of a network of superconducting atoms, which enables gate operations between non-neighboring atoms.

The development of noisy intermediate-scale quantum (NISQ) devices has extended the scope of executable quantum circuits with high-fidelity single- and two-qubit gates. Equipping NISQ devices with three-qubit gates will enable the realization of more complex quantum algorithms and efficient quantum error correction protocols with reduced circuit depth. Several three-qubit gates have been implemented for superconducting qubits, but their use in gate synthesis has been limited due to their low fidelity. Here, using fixed-frequency superconducting qubits, we demonstrate a high-fidelity iToffoli gate based on two-qubit interactions, the so-called cross-resonance effect. As with the Toffoli gate, this three-qubit gate can be used to perform universal quantum computation. The iToffoli gate is implemented by simultaneously applying microwave pulses to a linear chain of three qubits, revealing a process fidelity as high as 98.26(2)%. Moreover, we numerically show that our gate scheme can produce additional three-qubit gates which provide more efficient gate synthesis than the Toffoli and iToffoli gates. Our work not only brings a high-fidelity iToffoli gate to current superconducting quantum processors but also opens a pathway for developing multi-qubit gates based on two-qubit interactions.

Entangling gates in superconducting quantum computers suffer from imperfection of control and relaxation of qubits. The Toffoli gate, essential to various quantum algorithms and to certain fast error correction schemes, represents a particular challenge, as it is decomposed into at least six two-qubit gates, whose errors accrue on top of the increased probability of qubit relaxation due to the long gate time. While it is possible to significantly reduce the depth of the Toffoli gate by exploiting three-level, i.e., qutrit states internally, existing methods are susceptible to errors arising from frequency drifts due to charge fluctuation effects in the second excited state of the transmon. In this poster, we propose a novel qutrit-based implementation of the Toffoli gate that is inherently robust against such errors. The method is extensively validated through a pulse-level simulation and experiments performed on IBM Quantum machines. On one device, where the total Toffoli gate time is 2.510μs, we obtained average gate fidelity values of 0.928 ± 0.007 and 0.896 ± 0.036 from multiple measurements performed during the first one and twenty-four hours after calibrations, respectively, where the errors represent the standard deviations of the measurement results.

Recent advancements of quantum technologies have triggered tremendous interest in exploring practical quantum advantage. The simulation of fluid dynamics, a highly challenging problem in classical physics but vital for practical applications, emerges as a potential direction. Here, we report an experiment on the digital simulation of unsteady flows with a superconducting quantum processor. The quantum algorithm is based on the Hamiltonian simulation using the hydrodynamic formulation of the Schrödinger equation. With the median fidelities of 99.97% and 99.67% for parallel single- and two-qubit gates respectively, we simulate the dynamics of a two-dimensional (2D) compressible diverging flow and a 2D decaying vortex with ten qubits. Note that the former case is an inviscid potential flow, and the latter one is an artificial vortical flow with an external body force. The experimental results well capture the temporal evolution of averaged density and momentum profiles, and qualitatively reproduce spatial flow fields with moderate noises. This work demonstrates the potential of quantum computing in simulating more complex flows, such as turbulence, for practical applications.

Rapid progress in semiconductor spin qubits has enabled experimental demonstrations of a two-qubit logic gate. Understanding spin decoherence in a two-qubit logic gate is necessary for optimal qubit operation. We study spin decoherence due to 1/f charge noise for two electrons in a double quantum dot used for a two-qubit controlled-phase gate. In contrast to the usual belief, spin decoherence can be dominated by the tunneling noise from 1/f charge noise instead of the detuning noise. Tunneling noise can dominate because the effect of tunneling noise on the spin qubit is first order in the charge admixture; while the effect of the detuning noise is only second order. The different orders of contributions result in different detuning dependence of the decoherence, which provides a way to identify the noise source. We find that decoherence in a recent two-qubit experiment was dominated by the tunneling noise from 1/f charge noise. The results illustrate the importance of considering tunneling noise to design optimal operation of spin qubits.

Accurate characterisation of two-qubit gates will be critical for any realisation of quantum computation. We discuss a range of measurements aimed at characterising a two-qubit gate, specifically the CNOT gate. These measurements are architecture-independent, and range from simple truth table measurements, to single figure measures such as the fringe visibility, parity, fidelity, and entanglement witnesses, through to whole-state and whole-gate measures achieved respectively via quantum state and process tomography. In doing so, we examine critical differences between classical and quantum gate operation.

The aim of the work is to give an explanation of the magnetic properties of a mixed‐valence [GeV14O40]8– polyoxometalate reduced by two electrons, which, in contrast to what happens in other two‐electron‐reduced polyoxometalates, does not show any magnetic coupling between the two unpaired electrons. For this purpose, a quantitative evaluation of the microscopic electronic parameters (electron transfer, magnetic coupling, magnetic orbital energy, and Coulomb repulsion) of the mixed‐valence polyoxometalate cluster is performed. The parameters are extracted from valence‐spectroscopy large configuration interaction (CI) calculations on embedded fragments. Then, these parameters are used in an extended t‐J model Hamiltonian suited to model the properties of the whole anion. The analysis of the wave functions of the lowest singlet and triplet states and of the microscopic parameters emphasizes that the electron delocalization in this mixed‐valence cluster is such that each unpaired electron is almost trapped in a different half of the polyoxovanadate, thus disabling any exchange interaction between them.(© Wiley‐VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2009)

We propose a nonadiabatic non-Abelian geometric quantum operation scheme to realize universal quantum computation with mesoscopic Rydberg atoms. A single control atom entangles a mesoscopic ensemble of target atoms through long-range interactions between Rydberg states. We demonstrate theoretically that both the single qubit and two-qubit quantum gates can achieve high fidelities around or above 99.9% in ideal situations. Besides, to address the experimental issue of Rabi frequency fluctuation (Rabi error) in Rydberg atom and ensemble, we apply the dynamical-invariant-based zero systematic-error sensitivity (ZSS) optimal control theory to the proposed scheme. Our numerical simulations show that the average fidelity could be 99.98% for single ensemble qubit gate and 99.94% for two-qubit gate even when the Rabi frequency of the gate laser acquires 10% fluctuations. We also find that the optimized scheme can also reduce errors caused by higher-order perturbation terms in deriving the Hamiltonian of the ensemble atoms. To address the experimental issue of decoherence error between the ground state and Rydberg levels in Rydberg ensemble, we introduce a dispersive coupling regime between Rydberg and ground levels, based on which the Rydberg state is adiabatically discarded. The numerical simulation demonstrate that the quantum gate is enhanced. By combining strong Rydberg atom interactions, nonadiabatic geometric quantum computation, dynamical invariant and optimal control theory together, our scheme shows a new route to construct fast and robust quantum gates with mesoscopic atomic ensembles. Our study contributes to the ongoing effort in developing quantum information processing with Rydberg atoms trapped in optical lattices or tweezer arrays.

Quantum logic gates are the essential components of quantum computation and have broad practical applications, especially for the multiple-qubit logic gates. Compared with appliying a series of single- and two-qubit gates, constrcuting quantum computation with multiple-qubit logic gates can be more efficient and high-fidelity. As a three-qubit logic gate, Deutsch gate enables the realization of any feasible quantum computations. Based on neutral atoms, we present a scheme of super-robust Deutsch gate via optimal control technique. Utilizing the Rydberg blockade effect of neutral atoms, we design an implementable D(β) based on the three-step program. One of the notable advantages of this function is that β can be achieved arbitrarily between 0 and π with the operation of target atom. In addition, we give an analytical solution agreed very well with numerical simulations for the residual blocking effect between next-neighbor atoms that affects the performance quality of Deutsch gate. The fidelity of our proposed scheme is demonstrated by numerical simulation of the master equation based on the full Hamiltonian, and the robustness of our scheme with control errors is also illustrated. Our proposal offers an alternative promising scheme for fault-tolerant quantum computation. Published by the American Physical Society 2024

A number of quantum algorithms have been performed on small quantum computers; these include Shor's prime factorization algorithm, error correction, Grover's search algorithm and a number of analog and digital quantum simulations. Because of the number of gates and qubits necessary, however, digital quantum particle simulations remain untested. A contributing factor to the system size required is the number of ancillary qubits needed to implement matrix exponentials of the potential operator. Here, we show that a set of tunneling problems may be investigated with no ancillary qubits and a cost of one single-qubit operator per time step for the potential evolution, eliminating at least half of the quantum gates required for the algorithm and more than that in the general case. Such simulations are within reach of current quantum computer architectures.

High-fidelity single- and multiqubit operations compose the backbone of quantum information processing. This fidelity is based on the ability to couple single- or two-qubit levels in an extremely coherent and precise manner. A necessary condition for coherent quantum evolution is a highly stable local oscillator driving these transitions. Here we study the effect of fast noise, that is, noise at frequencies much higher than the local oscillator linewidth, on the fidelity of one- and two-qubit gates in a trapped-ion system. We analyze and measure the effect of fast noise on single-qubit operations, including resonant $\ensuremath{\pi}$ rotations and off-resonant sideband transitions. We further numerically analyze the effect of fast phase noise on the M\o{}lmer-S\o{}rensen two-qubit gate. We find a unified and simple way to estimate the performance of all of these operations through a single parameter given by the noise power spectral density at the qubit response frequency. While our analysis focuses on phase noise and on trapped-ion systems, it is relevant for other sources of fast noise as well as for other qubit systems in which spinlike qubits are coupled by a common bosonic field. Our analysis can help in guiding the design of quantum hardware platforms and gates, improving their fidelity towards fault-tolerant quantum computing.