• Cite Icon9
  • https://doi.org/10.1117/1.1530570Copy DOI Icon

MoSi etch of phase-shift masks

  • Abstract
  • Literature Map
  • References
  • Citations
  • Similar Papers
Abstract

Studies on MoSi etch processes were carried out using a design-of-experiments (DOE) methodology. Data was gathered using profilometers and optical critical dimension (CD) measurement systems. MoSi etch chemical kinetics was studied and a kinetic equation was developed showing that MoSi etch rate has a linear relationship with inductively coupled plasma (ICP) power, and an exponential relationship with the negative inverse of the DC bias electrode voltage. The reaction orders of the MoSi etch were 0.2 to SF6 concentration (molar fraction) and 0.5 to O2 concentration, and the activation energy was found to be 1350 kJ/mol. A dimensionless number method was used for results analysis and a calculable dimensionless number was defined. This number was found to be proportional to the isolated/dense etch bias. Etcher performance was also analyzed using a matrix transformation method and it was found that matrix-analysis-calculated etch results agreed with those obtained by experimental measurement. The optimal MoSi etch process window was expressed graphically.

Similar Papers
  • Research Article
  • Citations3

Photomask Cr–MoSi etching

  • May 01, 2004
  • Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
  • Banqiu Wu
  • Conference Article
  • Citations1

Final CD control through slope/sidewall angle correlation with stepper defocus and electrical parametric

  • Apr 20, 2001
  • Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE
  • Robert L Campbell +4
  • Research Article
  • Citations4

In-line Critical Dimension Measurement System Development of LCD Pattern Proposed by Newly Developed Edge Detection Algorithm

  • Oct 25, 2013
  • Journal of the Optical Society of Korea
  • Sung-Hoon Park +2
  • Addendum
  • Citations39

Erratum to “Spectroscopic ellipsometry and reflectometry from gratings (Scatterometry) for critical dimension measurement and in situ, real-time process monitoring” [Thin Solid Films 455–456 (2004) 828–836

  • Sep 25, 2004
  • Thin Solid Films
  • Hsu-Ting Huang +1
  • Research Article
  • Citations2

Real-time inspection system utilizing scatterometry pupil data

  • Sep 19, 2014
  • Journal of Micro/Nanolithography, MEMS, and MOEMS
  • Jae Yeon Baek +3
  • Research Article

Measurement of semi-isolated polysilicon gate structure with the optical critical dimension technique

  • Jan 01, 2003
  • Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures
  • Deepak Shivaprasad +5
  • Conference Article
  • Citations2

Gate etch process control

  • May 27, 2003
  • Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE
  • Ole Krogh +3
  • Conference Article
  • Citations6

A Practical Method For Edge Detection And Focusing For Linewidth Measurements On Wafers

  • Jul 23, 1985
  • Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE
  • Diana Nyyssonen
  • Conference Article
  • Citations11

Nested uncertainties and hybrid metrology to improve measurement accuracy

  • Mar 17, 2011
  • Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE
  • R M Silver +5
  • Conference Article
  • Citations7

Hybrid metrology universal engine: co-optimization

  • Apr 02, 2014
  • Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE
  • Alok Vaid +7
  • Conference Article
  • Citations6

Automated CD measurements with the Hitachi S-6280

  • May 22, 1995
  • Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE
  • Elizabeth E Chain +1
  • Conference Article

Area measurements for simulation-based dispositioning of masks

  • Oct 21, 2005
  • Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE
  • Gerard Luk-Pat +3
  • Conference Article
  • Citations1

Massive metrology and failure identification for DRAM applications (Conference Presentation)

  • Mar 26, 2019
  • Harm Dillen +14
  • Conference Article
  • Citations2

Contrasting conventional and machine learning approaches to optical critical dimension measurements

  • Mar 24, 2020
  • Bryan M Barnes +1
  • Conference Article
  • Citations6

A Bayesian statistical model for hybrid metrology to improve measurement accuracy

  • May 23, 2011
  • Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE
  • R M Silver +5
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.