• Home
  • Search
  • MTCA.4-based LLRF control system for the C-ADS proton Linac injector I
  • Cite Icon1
  • https://doi.org/10.1007/s41605-017-0003-5Copy DOI Icon

MTCA.4-based LLRF control system for the C-ADS proton Linac injector I

Show More
  • Abstract
  • Literature Map
  • References
  • Citations
  • Similar Papers
Abstract

The Chinese ADS proton Linac injector I composed of an electron cyclotron resonance ion source, a low-energy beam transport line, a radio frequency quadrupole (RFQ) accelerator, a medium-energy beam transport (MEBT) line, a superconducting section and beam dump with design goal to achieve CW proton beam with beam current 10 mA and energy gain around 10 MeV. In order to maintain the stability of the RF system, to compensate for the beam load effect and to provide the GUI required for the operation of the RF power system, we have established a LLRF control system. This LLRF system for ADS proton Linac injector I in IHEP consists of RF reference system and LLRF controllers for one RFQ cavity, two MEBT bunching cavities and 14 superconductive spoke cavities. We have adopted a new development mTCA.4-based hardware platform, and it has some characteristics such as faster bandwidth, standardized design, easy operation and maintenance and good expansibility. The LLRF system has been improved and optimized and has now been put into operation. It takes into account the pulse and CW beam flow mode, feedforward and feedback control functions. With the help of this system, we achieved stable operation with narrow pulses, long pulses, and CW modes under different beam loads. This article describes the implementation of this system and presents some initial the CW beam acceleration results with the help of this system at the end of 2016.

Similar Papers
  • Research Article

BEAM DYNAMICS ISSUES IN THE POST ACCELERATOR FOR THE RARE ISOTOPE ION BEAMS FROM ISOL SYSTEM IN RISP

  • Jul 01, 2014
  • JACOW
  • Ji-Gwang Hwang +8
  • Research Article

An integrated tool for ion linac design

  • Feb 01, 2024
  • Journal of Instrumentation
  • Orhan Cakir +6
  • Research Article
  • Citations21

Study on proton fraction of beams extracted from electron cyclotron resonance ion source

  • Feb 01, 2008
  • Review of Scientific Instruments
  • R Xu +6
  • Research Article
  • Citations2

Design of medium energy beam transport line between the RFQ and the Linac in the radioactive ion beam facility at VECC, Kolkata

  • Sep 01, 2010
  • Pramana
  • S Dechoudhury +7
  • Research Article

Re-Commissioning the Front End Test Stand Negative Hydrogen Ion Source, Beam Transport and Interlocks

  • Jun 01, 2018
  • JACOW
  • Scott Lawrie +10
  • Research Article
  • Citations13

Deuteron injector for Peking University Neutron Imaging Facility project

  • Feb 01, 2012
  • Review of Scientific Instruments
  • H T Ren +10
  • Research Article
  • Citations3

Commissioning of the 7 MeV H[formula omitted] linac injector for a 200 MeV proton synchrotron

  • Jul 23, 2022
  • Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
  • Zhongming Wang +21
  • Research Article
  • Citations4

Beam dynamics design of an RFQ for a planned accelerator, which uses a direct plasma injection scheme

  • Apr 16, 2008
  • Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
  • Zhou-Li Zhang +5
  • Research Article
  • Citations13

Improved design of proton source and low energy beam transport line for European Spallation Source

  • Dec 06, 2013
  • Review of Scientific Instruments
  • L Neri +12
  • Research Article

Designing and commissioning pre-analysis system for intense D-D/D-T neutron generator

  • Jul 01, 2021
  • Journal of Instrumentation
  • X.B Wei +6
  • Conference Article
  • Citations6

Design and testing of a DC ion injector suitable for accelerator-driven transmutation

  • Jan 01, 1995
  • AIP conference proceedings
  • J David Schneider +4
  • Research Article
  • Citations6

Thermal analysis and water-cooling design of the CSNS MEBT 324 MHz buncher cavity

  • Apr 01, 2008
  • Chinese Physics C
  • Liu Hua-Chang +1
  • Research Article
  • Citations42

Transport of intense ion beams and space charge compensation issues in low energy beam lines (invited)

  • Feb 01, 2012
  • Review of Scientific Instruments
  • N Chauvin +5
  • Conference Article
  • Citations1

A compact RF power coupler design for the SANAEM RFQ accelerator

  • Jan 01, 2018
  • AIP conference proceedings
  • Ersin Cicek +4
  • Research Article
  • Citations6

Physical design and multi-physics analysis of a 200 MHz continuous wave radio frequency quadrupole accelerator for a proton accelerator facility

  • May 01, 2023
  • Journal of Instrumentation
  • Z.L Zhang +9
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.