• Home
  • Search
  • BEAM DYNAMICS ISSUES IN THE POST ACCELERATOR FOR THE RARE ISOTOPE ION BEAMS FROM ISOL SYSTEM IN RISP
  • https://doi.org/10.18429/jacow-ipac2014-thpme149Copy DOI Icon

BEAM DYNAMICS ISSUES IN THE POST ACCELERATOR FOR THE RARE ISOTOPE ION BEAMS FROM ISOL SYSTEM IN RISP

  • Jul 1, 2014
  • JACOW
  • Ji-Gwang Hwang +8 more
Show More
  • Abstract
  • Literature Map
  • References
  • Similar Papers
Abstract

The accelerator for RISP, which is the superconducting technology based heavy ion linear accelerator construction project, is composed mainly of the driver linac for stable ion beam from an ECR ion source and post linac for unstable ion from an ISOL system. The post accelerator can accelerate the unstable ion beams up to 16.5 MeV/u for 132 Sn and 16.0 MeV/u for 58 Ni, which has the ratio of mass to charge, A/q, of 8.3. The unstable ion beam such as 132 Sn from an ISOL system has the large initial transverse and longitudinal emittances. Hence acceptance and envelope of the post accelerator should be optimized for stable operation. The beam was transported by the post-to-driver transport (P2DT) line which consists of a charge stripper, two charge selection sections and a telescope section with the bunching cavities. In this presentation, we will show the criteria for the design of the post accelerator and result of beam tracking simulation from the low energy transport line to the end of post linac. The initial coordinates of the particles were acquired by the tracking simulation from the low energy beam transport (LEBT) line to the medium energy beam transport (MEBT) line.

Similar Papers
  • Research Article
  • Citations1

MTCA.4-based LLRF control system for the C-ADS proton Linac injector I

  • May 05, 2017
  • Radiation Detection Technology and Methods
  • R Liu +11
  • Research Article
  • Citations2

Design of medium energy beam transport line between the RFQ and the Linac in the radioactive ion beam facility at VECC, Kolkata

  • Sep 01, 2010
  • Pramana
  • S Dechoudhury +7
  • Research Article

Re-Commissioning the Front End Test Stand Negative Hydrogen Ion Source, Beam Transport and Interlocks

  • Jun 01, 2018
  • JACOW
  • Scott Lawrie +10
  • Research Article

An integrated tool for ion linac design

  • Feb 01, 2024
  • Journal of Instrumentation
  • Orhan Cakir +6
  • Research Article
  • Citations6

Thermal analysis and water-cooling design of the CSNS MEBT 324 MHz buncher cavity

  • Apr 01, 2008
  • Chinese Physics C
  • Liu Hua-Chang +1
  • Research Article
  • Citations13

Deuteron injector for Peking University Neutron Imaging Facility project

  • Feb 01, 2012
  • Review of Scientific Instruments
  • H T Ren +10
  • Conference Article
  • Citations5

High intensity proton source and LEBT for the European spallation source

  • Jan 01, 2018
  • AIP conference proceedings
  • L Celona +14
  • Research Article
  • Citations42

Transport of intense ion beams and space charge compensation issues in low energy beam lines (invited)

  • Feb 01, 2012
  • Review of Scientific Instruments
  • N Chauvin +5
  • Conference Article
  • Citations6

Design and testing of a DC ion injector suitable for accelerator-driven transmutation

  • Jan 01, 1995
  • AIP conference proceedings
  • J David Schneider +4
  • Conference Article
  • Citations2

Design of a 35 keV LEBT for the new high intensity OPPIS at BNL

  • Mar 27, 1999
  • J Alessi +7
  • Research Article
  • Citations11

Comparison of extraction and beam transport simulations with emittance measurements from the ECR ion source venus**This Research was conducted at LBNL and was supported by the U.S. Department of Energy under ContractDE-AC02-05CH11231.

  • Dec 01, 2010
  • Journal of Instrumentation
  • D Winklehner +5
  • Research Article
  • Citations2

IsoDAR@Yemilab: Preliminary design report—volume I (cyclotron driver)

  • Oct 15, 2025
  • The European Physical Journal Special Topics
  • Daniel Winklehner +27
  • Research Article
  • Citations21

Study on proton fraction of beams extracted from electron cyclotron resonance ion source

  • Feb 01, 2008
  • Review of Scientific Instruments
  • R Xu +6
  • Research Article
  • Citations4

Beam dynamics design of an RFQ for a planned accelerator, which uses a direct plasma injection scheme

  • Apr 16, 2008
  • Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
  • Zhou-Li Zhang +5
  • Conference Article
  • Citations9

Design of the prototype low energy beam transport line for the Spallation Neutron Source

  • Apr 08, 2008
  • D.W Cheng +7
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.