Multi-objective design approach of passive filters for single-phase distributed energy grid integration systems using particle swarm optimization

Particle swarm optimization approach for multi-objective composite box-beam design

The particle swarm optimization (PSO) algorithm presents a new way for finding optimal solutions of complex optimization problems. In this paper a modified particle swarm optimization algorithm is presented. We modify the PSO algorithm in some aspects. Firstly, a contractive factor is introduced to the position update equation, and the particles are limited in search region. A new strategy for updating velocity is then adopted, in which the velocity is weakened linearly. Thirdly, using an idea of intersecting two modified PSO algorithms. Finally, adding an item of integral control in the modified algorithm can improve its global search ability. Based on these strategies, we proposed a new PSO algorithm named crossed PSO algorithm. Simulation results show that the crossed PSO is superior to the original PSO algorithm and can get overall promising performance over a wide range of problems.

Collaborative beamforming in wireless sensor networks using a novel particle swarm optimization algorithm variant

Neural Network system for SoC is one topic in the world. Recently, SoC began to combine AI technique by Python. When developers consider Intelligent system on SoC, the co-design software and hardware are significant. In this case, small devices and embedded system are target system. For IoT, those techniques will grow up in the world. Those cases, avoiding premature convergence while keeping performance is a challenge in training the neural network, especially in a case of large NNs or a large number of training data. In this case, one problem is a huge memory and processing power. For tiny memory and processing system as SoC, we propose an improved particle swarm optimization (PSO) algorithm called the PSOseed2 algorithm for training NN. The PSOseed2 algorithm solves the premature convergence of the standard PSO (SPSO) algorithm by slightly modifying the velocity update function without adding many computational tasks to the SPSO algorithm. We evaluated this algorithm on field programmable gate array (FPGA)-based NN and software-based NN and trained these NNs with different PSO algorithms that are SPSO, PSOseed, PSOseed2, and dissipative PSO. Experimental results with different datasets confirmed that the NNs trained by the proposed PSOseed2 algorithm had better recognition rates and lower global learning errors than the NN trained by other PSO algorithms. In this talk, I would like to talk those relational research in the world and our results and discussion.

Given the adverse impact and unnecessary costs associated with harmonic pollution in electrical power systems, such as increasing losses and decreasing life expectancy of equipment, development of new filtering techniques with higher quality of power, higher efficiency of transmission and distribution, and lower cost of filters is urgently required. This has become all the more important as society increasingly moves towards an environment filled with sophisticated electronic equipment and power-sensitive electrical machinery. The present work was conceived to provide a way forward towards the goal of improving Power Quality (PQ) by designing a new passive shunt filter based on minimizing the responsibility of the consumer for harmonic pollution, while simultaneously taking into account other relevant objective functions and related techno-economic considerations. Shunt passive filters are commonly found in power industries, where quality of power is paramount, in view of their simplicity of design, lower cost and their having possibly different range of frequency response characteristics that can satisfy a specific harmonic filtering needs. In addition, passive filters, in general, have two primary favourable features, they support reactive power to correct the load power factor and they mitigate harmonic distortion. This study favours passive filters while conceptualizing the research problem and formulating a proposed design. This thesis presents an optimal design of single-tuned passive filters that mm1m1zes consumer's responsibility for harmonic pollution. A solution for the allocation ofresponsibility between supplier and consumer has proved complex and elusive and it remains, therefore, absent. When, whoever takes whatever steps to contain the harmonic distortion, involves costs and expenditure, the situation inevitably leads to conflict between consumer and utility. In order to avoid this unwholesome state of affairs and introduce a degree of rationality and clarity, this study focuses on quantifying harmonic pollution responsibility by substantiating a new "NonLinearity Current Index" (NLCI) and presenting the mathematical modelling of the filter accordingly. The task of designing the filter, then, is posed as a quadratic optimization problem with nonlinear constraints, whose objective function includes the newly proposed NLCI, which will be minimized, as well as five other conventional objective functions that are most frequently used in the design of passive filters. The five objective functions are: i. maximization ofload power factor; ii. Minimization of the voltage total harmonic distortion; iii. minimization of the current total harmonic distortion; iv. minimization of transmission loss; and v. minimization of the filter investment cost. A suitable analytic framework is established, in which circuit analysis is made and relevant auxiliary mathematical expressions are derived for the system under study, followed by the filter design problem posed as an optimization question with the required objective functions and constraints. This thesis uses FORTRAN Feasible Sequential Quadratic Programming (FFSQP) to obtain the optimal values for the single-tuned shunt passive filter elements. The performance of the proposed index and the other five conventional objective functions is evaluated using six numerical 'benchmark' case studies to demonstrate the applicability, viability, validity and usefulness of the proposed harmonic passive filters. A rigorous and thorough comparison of the results of the design with and without compensation is included. As resonance is a critical design issue of passive filters, special care was taken, during the problem formulation, to avoid any risk of it in the compensated system. Care was also taken to meet capacitor loading specifications as given in IEEE Standard 18-2012 and practical constraints for the voltage total and individual harmonic distortion limits were followed in accordance with IEEE 519-2014 guidelines. The results of this study demonstrate the validity and effectiveness of the optimization method, for the given objective functions, since improvements were seen in both power factor and displacement power factor in all the case studies as well as notable reductions in rms values of the line current which led to reduced transmission losses, voltage drop and increased transmission efficiency, to various degrees and in a variety of combinations. Incorporation of the newly designed passive filter resulted in a considerable reduction in NLCI, indicating increased linearity because of minimization of the difference between supply current rms and linear current m1s at the point of common coupling. Critical impedance values also improved, because of the greatly reduced m1s line current. The NLCI minimised passive filter design differentiates the contributions of the supplier and consumer to harmonic pollution in a given system, and, therefore, provides a valuable solution where currently there is none in the literature, reflected in the absence of recognised standards and methodologies in this area. The small size of the proposed filter, in comparison to many other published designs, entails considerably lower financial investment costs, which, combined with its effectiveness at reducing harmonic pollution makes it a very valuable contribution to power system design and installation.

In order to solve the problem of interaction between multiple evaluation indexes of seed metering performance under multiple factors of centralized seed feeding device, a multi-objective optimization of structure based on particle swarm optimization (PSO) algorithm was proposed in this paper. The wheat centralized seed feeding device was taken as the research object, and the experimental factors were cone angle of type hole, working speed and seed filling gap. The working process of wheat centralized seed feeding device was simulated by discrete element method (DEM). The average seed number of type hole, the variation coefficient of the average seed number of type hole, and the maximum tangential force between seed and seed feeding mechanism were selected as the evaluation indexes. Through the variance analysis of the evaluation indexes by the experimental factors, the optimization objective function was constructed. Using PSO algorithm, the multi-objective optimization was carried out for the wheat centralized seed feeding device. The optimization results show that the best structural combination parameters of the wheat centralized seed feeding device are the hole cone angle of 31.6° and the seed filling gap of 4.6 mm. The validity of the method was verified by simulation and field test. The results show that the PSO algorithm multi-objective optimization method proposed in this paper can provide a reference for the structural improvement and optimal design of the centralized seed feeding device. Keywords: centralized seed feeding device, multi-objective, optimization, PSO algorithm DOI: 10.25165/j.ijabe.20201306.5665 Citation: Wang Q Q, Li Z D, Wang W W, Zhang C L, Chen L Q, Wan L. Multi-objective optimization design of wheat centralized seed feeding device based on particle swarm optimization (PSO) algorithm. Int J Agric & Biol Eng, 2020; 13(6): 76–84.

In our previous research applied to the job shop scheduling problem (JSSP) for machine tool production, the multi-objective optimisation model based on the particle swarm optimization (PSO) research had an imbalance performance between the convergence rate and the convergence precision. In this article, a new hybrid algorithm using PSO and generic algorithm (GA) is proposed to solve this particular problem. In this new algorithm, named hybrid PSO-GA algorithm (HPGA), the PSO algorithm is redefined and modified by introducing genetic operators, i.e. the crossover operator and the mutation operator, to update the particles in the population. The HPGA is then applied in heavy machinery company with minimising machines’ makespan and minimising jobs’ tardiness as the two optimal objectives. The comparisons with actual application report have illustrated that the proposed HPGA can obtain higher quality of schedule solution for machine tool production. Furthermore, with solution quality and convergence rate as the two estimation measurements metrics, some comparisons are performed in order to illustrate that the HPGA has superiority over the PSO, GA and simulated annealing algorithm (SA). Results have indicated that, with the combination of the merits of PSO and GA, the proposed HPGA approach can achieve not only better solution quality but also faster convergence rate than the PSO, GA and SA, within a reasonable computation time for high dimensions JSSP.

The maximum power point tracking (MPPT) system ensures that the solar cell operates at its maximum power point, which is the point at which it produces the most power for a given set of conditions. This study uses an artificial bee colony (ABC) algorithm and particle swarm optimization (PSO) algorithms to optimize the boost converter. The ABC and PSO algorithms help to optimize the boost converter by finding the best possible duty cycle and other parameters that maximize efficiency. The resulting duty cycle of 20% produced the highest efficiency of 78.26% obtained from the boost converter. A system-wide test was conducted between 9:00 and 11:10 WIB. In MPPT systems using boost converters with the PSO algorithm, the average power is 16.80 W, while in MPPT systems using boost converters with the ABC algorithm, the average power is 14.53 W. The novelty of the study discusses a system designed to optimize power by using a boost converter in order to increase power output from solar panels. The algorithms PSO and ABC are used to analyze the data from the PV and adjust the converter parameters to optimize the output in order to increase the efficiency of the system.

A dynamic adaptive particle swarm optimization and genetic algorithm is presented to solve constrained engineering optimization problems. A dynamic adaptive inertia factor is introduced in the basic particle swarm optimization algorithm to balance the convergence rate and global optima search ability by adaptively adjusting searching velocity during search process. Genetic algorithm–related operators including a selection operator with time-varying selection probability, crossover operator, and n-point random mutation operator are incorporated in the particle swarm optimization algorithm to further exploit optimal solutions generated by the particle swarm optimization algorithm. These operators are used to diversify the swarm and prevent premature convergence. Tests on nine constrained mechanical engineering design optimization problems with different kinds of objective functions, constraints, and design variables in nature demonstrate the superiority of the dynamic adaptive particle swarm optimization and genetic algorithm against several other meta-heuristic algorithms in terms of solution quality, robustness, and convergence rate in most cases.

To solve the strong randomicity and slow convergence of the Particle Swarm Optimization(PSO) algorithms, two new particle’s position renewal formulas were analyzed on the basis of extrapolation in mathematics. A new modified PSO algorithms (called Leading PSO algorithms) was put forward. The Direct Torque Control(DTC) System was built in the environment of Matlab(Simulink). The weight and threshold values of BP Neural Network were trained using the modified PSO algorithms. Some disadvantages such as slow convergence speed and easily plunging into the local solution were avoided effectively. The simulation result shows that the system works well, and the rotor speed identifier has great static and dynamic performance.

To improve the simulation accuracy of disease prediction model, a modified hybrid algorithm combining BP neural network (BPNN) with particle swarm optimization (PSO) algorithm based on chaos theory optimization is proposed considering BPNN is easy to fall into the local extremum. The chaos theory is used to optimize PSO algorithm to overcome the premature convergence of the traditional PSO algorithm. Then, the improved CAPSO algorithm is used to train the BPNN, to make full use of the global search characteristic of PSO algorithm and the local search ability of BPNN. The fitness function of the PSO algorithm is used as the energy function, and the optimization method of the improved hybrid algorithm is selected according to the specified number of evolution. An optimized network model was used to predict the prevalence of coronary heart disease. Compared with other algorithms such as BP neural network, the results show that the proposed algorithm has high accuracy and can significantly improve the quality of prediction.

In this paper, we present a concept of a transistor level implementation of the Particle Swarm Optimization (PSO) algorithm that belongs to the group of unsupervised learning algorithms aimed at the design of artificial neural networks (ANNs). The algorithm exhibits an ability to search for an optimal solution in a multidimensional data space, in which many sub-optimal solutions may exist. The ANN that operates in accordance with the PSO algorithm is composed of a set of cooperating particles (agents) that explore an input data space and communicate information on the best found solution to other particles. The PSO algorithm is usually implemented in software. We in our investigations focus on its transistor level realization. Such an approach enables parallel data processing, in which the overall data rate only moderately depends on the number of particles. Most of the operations and components of such implemented PSO algorithm may be reused considering our former CMOS realizations of other self-organizing learning algorithms. This allowed us to assess main parameters of the PSO.

Improved Adaptive PSO-based Gain Tuning for PID Controllers in Utility Boilers

The Particle swarm optimization (PSO) algorithm is a population-based intelligent stochastic search technique encouraged from the intrinsic manner of bee swarm seeking for their food source. With flexibility for numerical experimentation, the PSO algorithm has been mostly used to resolve diverse kind of optimization problems. The PSO algorithm is frequently captured in local optima meanwhile handling the complex real-world problems. Many authors improved the standard PSO algorithm with different mutation strategies but an exhausted comprehensive overview about mutation strategies is still lacking. This article aims to furnish a concise and comprehensive study of problems and challenges that prevent the performance of the PSO algorithm. It has tried to provide guidelines for the researchers who are active in the area of the PSO algorithm and its mutation strategies. The objective of this study is divided into two sections: primarily to display the improvement of the PSO algorithm with mutation strategies that may enhance the performance of the standard PSO algorithm to great extent and secondly, to motivate researchers and developers to use the PSO algorithm to solve the complex real-world problems. This study presents a comprehensive survey of the various PSO algorithms based on mutation strategies. It is anticipated that this survey would be helpful to study the PSO algorithm in detail for researchers.

In this paper, three new particle swarm optimization (PSO) algorithms are compared with the state of the art PSO algorithms for the optimal steady-state performance of power systems, namely, the reactive power and voltage control. Two of the three introduced, the enhanced GPAC PSO and LPAC PSO, are based on the global and local-neighborhood variant PSOs, respectively. They are hybridized with the constriction factor approach together with a new operator, reflecting the physical force of passive congregation observed in swarms. The third one is based on a new concept of coordinated aggregation (CA) and simulates how the achievements of particles can be distributed in the swarm affecting its manipulation. Specifically, each particle in the swarm is attracted only by particles with better achievements than its own, with the exception of the particle with the best achievement, which moves randomly as a crazy agent. The obtained results by the enhanced general passive congregation (GPAC), local passive congregation (LPAC), and CA on the IEEE 30-bus and IEEE 118-bus systems are compared with an interior point (IP)-based OPF algorithm, a conventional PSO algorithm, and an evolutionary algorithm (EA), demonstrating the excellent performance of the proposed PSO algorithms