MUTP aided MIMO downlink communication system with noisy feedback: Analysis and performance results

In this contribution, we consider the performance of multi-user transmitter pre-processing (MUTP) assisted interleaved division multiple access (IDMA) scheme for downlink (DL) communications. We realize MUTP using Zero Forcing (ZF)algorithm. In this paper, we consider turbo coded system to achieve high coding gain. We construct the turbo code using parallel concatenated convolutional encoder and certain bits are punctured periodically to achieve code rate ½. We construct the pre-processing matrix using channel state information of all the users. We evaluate the performance of such coded ZF-MUTP assisted IDMA system for realistic channel model based on SUI channel model specifications. From our simulations, we observe that the ZF-MUTP assisted multi-user IDMA system provides better performance in terms of bit error rate (BER) with low signal to noise ratio (SNR).

Multiple transmit antennas can be employed in a downlink channel to serve multiple users under the assumption of perfect channel state information (CSI) of all users at the base station. In practice, however, the channel knowledge available at the base station is not perfect. For instance, in case of a time division duplex (TDD) system, the transmit CSI is the estimated uplink channel. On the other hand, in a frequency division duplex (FDD) system, feedback from the users is required to obtain transmit CSI. In this case, we assume the transmit CSI consists of a quantized version of the normalized estimated channel vector and the statistics of the channel norm of each user. In this work we consider the transceiver design of the downlink of a multiuser MISO system based on the minimum mean square error (MMSE) criterion with imperfect CSI as discussed above.

Interference alignment (IA) is a multi-user wireless communication strategy that enables several transmitters simultaneous communicate with their paired receivers without interfering each other. IA is a multiplexing gain optimal strategy at the expense of requiring the global channel state information (CSI) at the transmitters. Most previous works assume the availability of perfect CSI which is not possible in practice. The performance of IA algorithms based on perfect CSI drop dramatically in circumstance where CSI errors exist. In this paper we propose a robust minimum mean square error (MMSE) IA algorithm with imperfect CSI. Based on a Gaussian statistic channel error model, we give the mean square error objective function with per transmitter power constraint. The objective function is not joint convex in precoders and decoders, but convex in precoders with fixed decoders and vice versa. We convert the problem to two convex sub problems and iteratively find the solutions. Numerical results are presented to validate the effectiveness of proposed algorithm when CSI errors exist.

Multiple-input multiple-output (MIMO) systems can achieve high data-rate and high capacity transmission. In MIMO systems, the scheme that weight substreams based on minimum mean square error (MMSE) criterion at the transmitter using feedback channel state information (CSI) achieves good performance (denoted hereafter as MMSE precoder). However, if the optimum number of substreams is not selected based on CSI and methods for reducing the performance degradation due to feedback delay is not used, MMSE precoder cannot achieve the full performance possible. In this paper, we propose an MMSE precoder with mode selection for MIMO systems, which selects both the number of substreams and the modulation scheme for each substream to minimize the average BER at a fixed rate. We evaluate the BER of the proposed MMSE precoder with two methods for reducing performance degradation due to feedback delay, channel prediction and receive weight robust to feedback delay. We also evaluate the BER of the proposed MMSE precoder with the method that combines channel prediction with receive weight robust to feedback delay. Simulation results show that the BER of the proposed MMSE precoder is improved compared to that of the conventional MMSE precoder using the fixed number of substreams. We also show that the method that combines channel prediction with receive weight robust to feedback delay can achieve good BER even when the large feedback delay exists.

In multi-user multiple input multiple output orthogonal frequency division multiplexing (MU- MIMO-OFDM) downlink system, it is important to have accurate channel state information (CSI) at the base station (BS) in order to minimize the inter-user interference (IUI). However when the channel changes rapidly, the available CSI at the BS can be outdated and this leads to the performance loss. The channel prediction algorithms can be used to predict the future CSI and compensate for the discrepancy between the estimated channel and the actual channel, and improve the performance of the overall system. In this paper, we propose to use recursive least square (RLS) algorithm to predict the CSI for the upcoming frame in MU-MIMO-OFDM downlink system. The simulation results show that RLS algorithm outperforms the other prediction algorithms such as normalized least mean square (NLMS) and the conventional linear extrapolation method. The simulation results are further validated with the measured channel results.

In this contribution, we investigate the performance of dual-polarized multi input multi output (MIMO) multi-carrier interleave division multiple access system (MC-IDMA) over correlated frequency selective channels in the presence of channel state estimation error. In the code division multiple access (CDMA), orthogonal spreading sequence is used as user specific where as in IDMA, user specific interleaving pattern is used. In our considered work, Multi-carrier (MC) is realized by orthogonal frequency division multiplexing (OFDM). The channel is estimated at the mobile stations (MSs) by pilot assisted channel estimation (PACE) technique using minimum mean square error (MMSE) algorithm. Further, the dual-polarized MIMO system considered in our work which is realized with the aid of orthogonal polarizations, replaces two spatially separated uni-polarized antennas, thus resulting in polarization multiplexing. In particular, we evaluate the effects of three types of delay spread on MIMO MC-IDMA system in the context of downlink (DL) communications pertaining to the Standard University Interim (SUI) channel model. In a multi-user environment, users experience multi stream interference (MSI) in addition to the multiple access interference (MAI) and these interferences can degrade the system performance. Furthermore, we consider turbo code as channel encoder for MIMO MC-IDMA system to mitigate the effects of MAI and MSI. It is discerned from the simulation results that dual-polarized MIMO MC-IDMA system is capable of supporting many users and performs better in terms of achievable bit error rate (BER) in the context of DL communications with reduced number of antennas.

SummaryIn this work, a deep learning (DL)‐based massive multiple‐input multiple‐output (mMIMO) orthogonal frequency division multiplexing (OFDM) system is investigated over the tapped delay line type C (TDL‐C) model with a Rayleigh fading distribution at frequencies ranging from 0.5 to 100 GHz. The proposed bi‐directional long short‐term memory (Bi‐LSTM) channel state information (CSI) estimator uses online learning during training and offline learning during the practical implementation phase. The design of the estimator takes into account situations in which prior knowledge of channel statistics is limited and targets excellent performance, even with limited pilot symbols (PS). Three separate loss functions (mean square logarithmic error [MSLE], Huber, and Kullback–Leibler Distance [KLD]) are assessed in three classification layers. The symbol error rate (SER) and outage probability performance of the proposed estimator are evaluated using a number of optimization techniques, such as stochastic gradient descent (SGD), momentum, and the adaptive gradient (AdaGrad) algorithm. The Bi‐LSTM‐based CSI estimator is trained considering a specific number of PS. It can be readily seen that by incorporating a cyclic prefix (CP), the system becomes more resilient to channel impairments, resulting in a lower SER. Simulations show that the SGD optimization approach and Huber loss function‐trained Bi‐LSTM‐based CSI estimator have the lowest SER and very high estimation accuracy. By using deep neural networks (DNNs), the Bi‐LSTM method for CSI estimation achieves a superior channel capacity (in bps/Hz) at 10 dB than long short‐term memory (LSTM) and other conventional CSI estimators, such as minimum mean square error (MMSE) and least squares (LS). The simulation results validate the analytical results in the study.

In this treatise, the performance of Code division multiple access (CDMA) system is investigated using multi-user transmitter pre-processing (MUTP). The MUTP is promising signal processing technique which is carried out at the transmitter side to reduce the burden of detector and hence low complexity receiver is made feasible at mobile station (MS) in the context of downlink (DL) communication. Further, the unique signature sequence is considered to support more user population. In particular, the performance of MMSE-MUTP assisted CDMA system is investigated for realistic channel specifications based on Stanford University Interim (SUI) channel model. It has been demonstrated that the MMSE-MUTP assisted CDMA system provides achievable bit error rate with low complexity of receiver for DL transmission.

Capacity maximizing in massive MIMO with linear precoding for SSF and LSF channel with perfect CSI

In this paper, we design a zero-forcing (ZF) Tomlinson-Harashima precoding (THP) and a minimum mean square error (MMSE) THP for multiuser MIMO relay system with direct link. Based on these precoding structures, we propose the optimal combining weights of the ZF THP and the MMSE THP in half duplex relay system, and the sub-optimal weights of MMSE THP to reduce feedback channel state information (CSI). Through the Monte Carlo simulation, we verify that the optimal weights combining method outperforms the constant weights combining method. In addition, we confirm that the performance of the sub-optimal weights combining method is close to the optimal method, while reducing the feedback CSI simultaneously.

This paper considers the uplink of a single-cell large-scale multiuser multiple-input multiple-output (MU-MIMO) system. The transmitted data is detected by linear receivers at the base station (BS), that is, maximum ratio combining (MRC), zero-forcing (ZF) and minimum mean square error (MMSE). New non-asymptotic outage expressions that are valid for any number of BS antennas are derived. It is shown that the MMSE scheme always achieves the best outage performance, and the ZF scheme outperforms the MRC scheme in the high signal-to-noise-ratio (SNR) regime, while the opposite holds in the low SNR regime. We also demonstrate that when the number of BS antennas is very large and the number of users is fixed, the asymptotic outage probability tends to zero, providing that the channel state information (CSI) is perfect. However, if both the number of BS antennas and the number of users grow large, it would be a different matter. Extensive numerical results are presented to verify the theoretical analysis.

With the increasing rate of wireless devices and high bandwidth operations, wireless networking and communications are becoming over crowded. To cope with such crowded and messy situation, massive MIMO is designed to work with hundreds of low-cost serving antennas at a time as well as improve the spectral efficiency at the same time. Time Division Duplexing (TDD) has been used for gaining beamforming which is a major part of massive MIMO, to gain its best improvement to transmit and receive pilot sequences. All the benefits are only possible if the channel state information or channel estimation is gained properly. Least Square (LS), Minimum Mean Square Error (MMSE) and Linear Minimum Mean Square Error (LMMSE) are the estimators commonly used for estimating channel matrices. We have optimized these methods using genetic algorithm to minimize the mean squared error and finding the best channel matrix from existing algorithms with less computational complexity. Our simulation result has shown that the use of Genetic Algorithm (GA) worked well on existing algorithms in a Rayleigh slow fading channel and existence of Additive White Gaussian Noise. We found that the GA optimized LS is better than existing algorithms. GA provides optimal result in some few iterations in terms of Mean Square Error (MSE) with respect to SNRand computational complexity.

Performance analysis of multicell multiuser MIMO MC DS/CDMA system with MMSE user-ordered SIC technique

Unlike the time-division duplexing (TDD) systems, the downlink (DL) and uplink (UL) channels are not reciprocal anymore in the case of frequency-division duplexing (FDD). However, some long-term parameters, e.g. the time delays and angles of arrival (AoAs) of the channel paths, still enjoy reciprocity. In this paper, by efficiently exploiting the aforementioned limited reciprocity, we address the DL channel state information (CSI) feedback in a practical wideband massive multiple-input multiple-output (MIMO) system operating in the FDD mode. In particular, the base station (BS) can transmit the FFT-based pilots with the carefully-selected phase shifts to align the DL paths. Then the user can rely on the so-called time-domain aggregate channel (TAC) to derive the estimate of the DL CSI. Next, with the knowledge about the second-order statistics of the DL channels, the user is also able to compute feedback of reduced dimensionality. We demonstrate that each user can just feed back one scalar number per DL channel path for the BS to recover the DL CSIs. Comprehensive numerical results corroborate our designs.

Uplink/downlink (UL/DL) decoupling promises more flexible cell association and higher throughput in heterogeneous networks (HetNets), however, it hampers the acquisition of DL channel state information (CSI) in time-division-duplex (TDD) systems due to different base stations (BSs) connected in UL/DL. In this paper, we propose a novel data-aided (DA) channel estimation scheme to address this problem by utilizing decoded UL data to exploit CSI from received UL data signal in decoupled HetNets where a massive multiple-input multiple-output BS and dense small cell BSs are deployed. We analytically estimate BER performance of UL decoded data, which are used to derive an approximated normalized mean square error (NMSE) expression of the DA minimum mean square error (MMSE) estimator. Compared with the conventional least square (LS) and MMSE, it is shown that NMSE performances of all estimators are determined by their signal-to-noise ratio (SNR)-like terms and there is an increment consisting of UL data power, UL data length and BER values in the SNR-like term of DA method, which suggests DA method outperforms the conventional ones in any scenarios. Higher UL data power, longer UL data length and better BER performance lead to more accurate estimated channels with DA method. Numerical results verify that the analytical BER and NMSE results are close to the simulated ones and a remarkable gain in both NMSE and DL rate can be achieved by DA method in multiple scenarios with different modulations.