千葉工業大学工学部機械電子創成工学科光ファイバ応用研究室

physica status solidi (b)Volume 154, Issue 2 p. K121-K126 Short Note On the Effective Electron Mass in Superlattices of III–V Semiconductors in the Presence of a Quantizing Magnetic Field K. P. Ghatak, K. P. Ghatak Department of Electronics and Telecommunication Engineering, Faculty of Engineering and Technology, University of Jadavpur, Calcutta Search for more papers by this authorB. Mitra, B. Mitra Department of Electronics and Telecommunication Engineering, Faculty of Engineering and Technology, University of Jadavpur, Calcutta Office of the Controller of Examinations, University of Jadavpur, Calcutta 700032, India.Search for more papers by this authorA. Ghoshal, A. Ghoshal Department of Electronics and Telecommunication Engineering, Faculty of Engineering and Technology, University of Jadavpur, Calcutta Search for more papers by this author K. P. Ghatak, K. P. Ghatak Department of Electronics and Telecommunication Engineering, Faculty of Engineering and Technology, University of Jadavpur, Calcutta Search for more papers by this authorB. Mitra, B. Mitra Department of Electronics and Telecommunication Engineering, Faculty of Engineering and Technology, University of Jadavpur, Calcutta Office of the Controller of Examinations, University of Jadavpur, Calcutta 700032, India.Search for more papers by this authorA. Ghoshal, A. Ghoshal Department of Electronics and Telecommunication Engineering, Faculty of Engineering and Technology, University of Jadavpur, Calcutta Search for more papers by this author First published: 1 August 1989 https://doi.org/10.1002/pssb.2221540247Citations: 20 Calcutta 700009, India. AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinked InRedditWechat Citing Literature Volume154, Issue21 August 1989Pages K121-K126 RelatedInformation

<p>This paper presents a 3D guidance scheme for<br>\nUnmanned Aerial Vehicles (UAVs). The proposed guidance scheme<br>\nis based on the sliding mode approach using nonlinear sliding<br>\nmanifolds. Generalized 3D kinematic equations are considered<br>\nhere during the design process to cater for the coupling between<br>\nlongitudinal and lateral motions. Sliding mode based guidance<br>\nscheme is then derived for the multiple-input multiple-output<br>\n(MIMO) system using the proposed nonlinear manifolds. Instead of<br>\ntraditional sliding surfaces, nonlinear sliding surfaces are proposed<br>\nhere for performance and stability in all flight conditions. In the<br>\nreaching phase control inputs, the bang-bang terms with signum<br>\nfunctions are accompanied with proportional terms in order to reduce<br>\nthe chattering amplitudes. The Proposed 3D guidance scheme is<br>\nimplemented on a 6-degrees-of-freedom (6-dof) simulation of a UAV<br>\nand simulation results are presented here for different 3D trajectories<br>\nwith and without disturbances.</p>

The Mechanical Engineering Cooperation Agency (BKS-TM Indonesia) has established the International Symposium on Advances and Innovation in Mechanical Engineering (ISAIME) as an annual scientific forum for academics, researchers, and practitioners in mechanical engineering. The 6 th ISAIME was convened on 9 October 2025, organized by the Mechanical Engineering Study Program, Faculty of Engineering, Mechanical Engineering Department, Universitas Andalas, Padang, Indonesia, with the theme “Artificial Intelligence and Sustainability in Mechanical Engineering: Smart Solution for a Greener Future.” This symposium served as a platform to present and discuss recent advances, research findings, and innovations across a wide range of topics, including mechanical application design, energy conversion, manufacturing processes, materials engineering, and mechanical engineering education. Distinguished experts delivered a total of two keynote lectures from Universiti Teknologi Malaysia and the Université Laval, Canada, while 112 papers were presented and grouped into four thematic areas: mechanical application design, energy conversion, manufacturing processes, and materials engineering. These contributions reflect the growing role of mechanical engineering in advancing technological innovation, environmental sustainability, and human resource development within Industry 4.0. The Organizing Committee gratefully acknowledges the sponsorship and support of various companies and partner institutions, as well as the commitment of all speakers, authors, and participants who contributed to the success of this event. The knowledge and insights shared during the 6 th ISAIME are expected to foster academic collaboration, strengthen networks between academia and industry, and advance science and technology in mechanical engineering.

physica status solidi (b)Volume 149, Issue 2 p. K117-K122 Short Note On the Einstein Relation in Semiconductor Superlattices under Magnetic Quantization B. Mitra, B. Mitra Department of Electronics and Telecommunication Engineering, Faculty of Engineering and Technology, Jadavpur University, Calcutta Search for more papers by this authorK. P. Ghatak, K. P. Ghatak Department of Electronics and Telecommunication Engineering, Faculty of Engineering and Technology, Jadavpur University, Calcutta Search for more papers by this author B. Mitra, B. Mitra Department of Electronics and Telecommunication Engineering, Faculty of Engineering and Technology, Jadavpur University, Calcutta Search for more papers by this authorK. P. Ghatak, K. P. Ghatak Department of Electronics and Telecommunication Engineering, Faculty of Engineering and Technology, Jadavpur University, Calcutta Search for more papers by this author First published: 1 October 1988 https://doi.org/10.1002/pssb.2221490250Citations: 17 Calcutta 700032, India. AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Citing Literature Volume149, Issue21 October 1988Pages K117-K122 RelatedInformation

Tether dynamics investigations for the Canadian OEDIPUS sounding rocket program

Department of Mechanical Engineering, B N M Institute of Technology, Bengaluru, India hosted the International Conference on Thermo-fluids and Energy Systems on December 27th and 28th 2019.BNMIT is a premier institution established in the year 2001 under aegis of BNM Charities. The institute is located in Banashankari II stage, a quiet and very well planned locality in the city of Bengaluru. The institute stands true to its legacy of excellence in academics, research and innovation. The institute offers undergraduate programs in Mechanical Engineering, Computer Science Engineering, Electronics and Communication Engineering, Electrical & Electronics Engineering and Information Science Engineering. It also offers post graduate degrees in VLSI & Embedded System, Computer Networking and Master of Business Administration. BNMIT is one among the top rated engineering colleges in the state Karnataka. BNMIT is accredited as Grade ‘A’ institution by NAAC and all undergraduate departments are accredited by NBA. The institute is ranked in the band of 151-200 by National Institutional Ranking Framework (NIRF, MHRD).The conference witnessed deliberations on various topics dealing with but not limited to Renewable Energy, Alternate Energy, Heat Transfer, IC Engines/Combustion, Computational Fluid Dynamics, Numerical analysis, Refrigeration & Air Conditioning, Cryogenic Heat Transfer, Porous Media etc.5 distinguished speakers from premier institutions in India and abroad delivered keynote addresses and invited talks on thrust areas. The conference provided a platform for mutual dissemination of ideas on thermo-fluids and energy systems between Indian and foreign researchers. The call for papers attracted over 90 submissions which were peer-reviewed by an expert committee and 62 submissions were accepted for oral presentation.The proceedings has 55 research papers arranged under 7 headers viz. Aerodynamics, Computational Analysis, Energy Systems, Heat Transfer, IC Engines, Physics and Refrigeration.The organizing committee thankfully acknowledges the support of JPCS: IOP in publishing the conference proceedings.Conference Chair(Dr. Mukesh Patil)

Recent experimental observations support the hypothesis that mechanical stimuli play a role in regulating the specialized molecular expression of articular cartilage in vitro and in vivo. Other studies have demonstrated that the continuous passive motion(CPM)bioreactor for whole joints can provide a platform for possible future in vitro studies and applications, including possible interactions of bio-mechanical and biochemical signals. In this study, we have developed acustom-made bioreactor capable of bending and stretching with circular type motion, and a biomimetic knee joint model, using a 3D printer. This system could be used to investigate the effects of rehabilitative joint motion of dynamic culture . Key Words : Articular Cartilage(관절연골), Bioreactor(동적배양기), Continuous Passive Motion (관절재활기구), Force Sensing Resistor (압력측정센서) * Division of Mechanical and Automotive Engineering, Wonkwang UNIV.** Department of Mechanical Engineering, Graduate school, Wonkwang UNIV. # Corresponding Author : Department of Mechanical and Automotive Engineering, Wonkwang UNIV. E-mail : sjlee411@wku.ac.kr

June7-10 Transducers '99 10th International Conference on Solid State Sensors and Actuators, Sendai, Japan Details: J Etizen, telephone: +81 3 3299 1371, fax: +81 3 3299 1361, e-mail: tr99@twics.com, WWW: http://www.com.cas.uec.ac.jp/trans99.html 13-18 IMEKO XV World Congress, Osaka, Japan Details: c/o The Society of Instrument and Control Engineers, 35-28-303, 1-Chome Hongo, Bunkyo-ku, Tokyo 113. Telephone: +81 3 3814 4121, fax: +81 3 3814 4699, e-mail: mnami@sice.or.jp 14-17 Laboratory Health and Safety, Loughborough University, UK Details: Joyce Bostock, Centre for Hazard and Risk Management (CHaRM), Loughborough University, Leicestershire LE11 3TU, UK. Telephone: +44 1509 222 175, fax: +44 1509 223 991, e-mail: j.g.bostock@lboro.ac.uk 21-25 Frontiers and Science and Measurement, National Physical Laboratory, Teddington, UK Details: Jane Tsakalou, telephone: +44 181 943 6400, fax: +44 181 943 6735, e-mail: jane.tsakalou@npl.co.uk, WWW: http://www.npl.co.uk July 11-15 National Conference of Standards Laboratories, Charlotte, North Carolina, USA Details: Tom Huttemann, 4890 County Road #11, Rushville, NY 14544, USA. Telephone: +1 716 554 6295, fax: +1 716 554 4434, e-mail: info@charlottecvb.org, WWW: http://www.ncsl-hq.org 13-15 The 6th International Workshop on Femtosecond Technology, Chiba, Japan Details: FST'99 Secretariat, The Femtosecond Technology Research Association, 5-5 Tokodai, Tsukuba 300-2635, Japan. Telephone: +81 298 47 5181, fax: +81 298 47 4417, e-mail: fst@festa.or.jp, WWW: http://www.festa.or.jp September 5-8 Sensors & their Applications X, Cardiff, UK Details: Belinda Hopley, Institute of Physics, Conferences Department, 76 Portland Place, London W1N 3DH. Telephone: +44 171 470 4800, fax: +44 171 470 4848, e-mail: belinda.hopley@iop.org, WWW: http://map.eng.abdn.ac.uk/ISAT 12-15 1st International Symposium on Turbulence and Shear Flow Phenomena, Santa Barbara, CA, USA Details: N Kasagi, Department of Mechanical Engineering, University of Tokyo, Tokyo 113 8656, Japan. Telephone: +81 3 3812 2111 ext. 6417, fax: +81 3 5800 6999, e-mail: kasagi@thtlab.t.u-tokyo.ac.jp, WWW: http://tsfp.t.u-tokyo.ac.jp 12-15 EUROSENSORS XIII, The Hague, The Netherlands Details: R F Wolffenbuttel, telephone: +31 15 278 6287, fax: +31 15 278, e-mail: eurosensors@ei.et.tudelft.nl 16-18 September 3rd International Workshop on Particle Image Velocimetry, University of California-Santa Barbara, USA Details: Professor C D Meinhart, Mechanical and Environmental Engineering Department, University of California-Santa Barbara, CA 93106, USA. Telephone: +1 217 333 3752, fax: 217 244 5707, e-mail: piv99@engineering.ucsb.edu, WWW: http://www.engineering.ucsb.edu/\\~piv99 October 5-7 ISA TECH 1999, Philadelphia, PA, USA Details: Telephone: +1 919 990 9217, fax: +1 919 549 8288, e-mail: kragland@isa.org, WWW: http://www.isa.org/techexpo/ 2000 July 10-13 10th International Symposium on Applications of Laser Techniques to Fluid Mechanics Details: Graça Pereira, Mechanical Engineering Department, Instituto Superior Técnico, 1049-001 Lisboa, Portugal. Fax: +351 1 849 6156, e-mail: llaser@dem.ist.utl.pt, WWW: http://in3.dem.ist.utl.pt/lisboa-laser

ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und MechanikVolume 75, Issue 12 p. 876-878 Short Communications Stretching a Surface in a Rotating Power-Law Fluid R. S. R. Gorla, R. S. R. Gorla Prof. Dr. R. S. R. GORLA and V. DAKAPPAGARI, Department of Mechanical Engineering, Cleveland State University, Cleveland, Ohio 44115, U.S.A.; Prof. Dr. I. POP, Faculty of Mathematics, University of Cluj, R-3400 Cluj, CP 253, RomaniaSearch for more papers by this authorV. Dakappagari, V. Dakappagari Prof. Dr. R. S. R. GORLA and V. DAKAPPAGARI, Department of Mechanical Engineering, Cleveland State University, Cleveland, Ohio 44115, U.S.A.; Prof. Dr. I. POP, Faculty of Mathematics, University of Cluj, R-3400 Cluj, CP 253, RomaniaSearch for more papers by this authorI. Pop, I. Pop Prof. Dr. R. S. R. GORLA and V. DAKAPPAGARI, Department of Mechanical Engineering, Cleveland State University, Cleveland, Ohio 44115, U.S.A.; Prof. Dr. I. POP, Faculty of Mathematics, University of Cluj, R-3400 Cluj, CP 253, RomaniaSearch for more papers by this author R. S. R. Gorla, R. S. R. Gorla Prof. Dr. R. S. R. GORLA and V. DAKAPPAGARI, Department of Mechanical Engineering, Cleveland State University, Cleveland, Ohio 44115, U.S.A.; Prof. Dr. I. POP, Faculty of Mathematics, University of Cluj, R-3400 Cluj, CP 253, RomaniaSearch for more papers by this authorV. Dakappagari, V. Dakappagari Prof. Dr. R. S. R. GORLA and V. DAKAPPAGARI, Department of Mechanical Engineering, Cleveland State University, Cleveland, Ohio 44115, U.S.A.; Prof. Dr. I. POP, Faculty of Mathematics, University of Cluj, R-3400 Cluj, CP 253, RomaniaSearch for more papers by this authorI. Pop, I. Pop Prof. Dr. R. S. R. GORLA and V. DAKAPPAGARI, Department of Mechanical Engineering, Cleveland State University, Cleveland, Ohio 44115, U.S.A.; Prof. Dr. I. POP, Faculty of Mathematics, University of Cluj, R-3400 Cluj, CP 253, RomaniaSearch for more papers by this author First published: 1995 https://doi.org/10.1002/zamm.19950751215Citations: 1AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Citing Literature Volume75, Issue121995Pages 876-878 RelatedInformation

NOTE: The first page of text has been automatically extracted and included below in lieu of an abstract Session 1432 A Combined Electrical and Mechanical Engineering Senior Design Laboratory M. E. Parten and D. L. Vines T. T. Maxwell and J. C. Jones Electrical Engineering Mechanical Engineering Texas Tech University Lubbock, TX 79409 Abstract This paper describes a multidisciplinary capstone design laboratory course offered in the Electrical and Mechanical Engineering Departments at Texas Tech University. The course uses projects from industry, research efforts and other faculty initiatives. The projects for the course come from industry, research efforts and other faculty initiatives. The courses are team taught by both departments. This paper describes the structure of the program along with example projects and results. Both positive and negative aspects of the program are presented. Introduction In the fall semester of 1994 the Electrical and Mechanical Engineering Departments at Texas Tech University began a multidisciplinary senior design project laboratory program. Two courses were established by integrating the Electrical Engineering Department's Senior Project Laboratory courses (two 3-semester credit hour courses) with the Mechanical Engineering Department's Design I and II capstone design courses (two 3-semester credit hour courses). The Electrical Engineering Department has a long history of project laboratories.1-5 The Mechanical Engineering Department has been involved in alternative fueled vehicles for a number of years. Both departments had worked together on a number of special projects and felt the need, as have many others6-11, for an increased interdisciplinary program for engineering students. The goals of these new courses were: to have the students develop an understanding of engineering design projects from recognition of a need and definition of design objectives through completion of the project to foster student creativity to broaden the students concept of engineering problems to include other engineering disciplines and other nonengineering factors that have an impact on the final problem solution to provide a unique educational experience for students on project teams to enhance the students communication skills The projects for the course come from industry, research efforts and other faculty initiatives.

A unified treatment of the thermodynamics of sinusoidal steady-state energy conversion : F. A. Morrison, Jr, Department of Mechanical and Industrial Engineering, University of Illinois, Urbana, Illinois, U.S.A.; and J. F. Osterle, Department of Mechanical Engineering, Carnegie-Mellon University, Pittsburgh, Pennsylvania, U.S.A. Energy Conversion, 9, 7–12 (1969)

Welcome to 2020 10th International Conference on Applied Physics and Mathematics (ICAPM 2020), which will be held in the Tama Campus of Chuo University, Tokyo, Japan during January 10-12, 2020. Tokyo is one of the 47 prefectures of Japan and has served as the Japanese capital since 1869. Chuo University founded in March 1885 was originally founded with an exclusive focus on law and legislation, and now has a wider range of subject areas including economics, science, and policy studies. Chuo University has eight faculties and seven graduate schools, as well as two professional graduate schools, four affiliated high schools, two affiliated junior high schools, and nine research institutes. We are delighted to come to the beautiful and prestigious Tama Campus of Chuo University, which is located in the Tama Hills Natural Park in the city of Hachioji, Tokyo, and to meet with so many of our distinguished collaborators and scientists to explore new knowledge and ideas.ICAPM is organized by American Society for Research (ASR). It has been successfully held in 9 consecutive years since 2011, respectively. In the past three years, ICAPM 2017, ICAPM 2018, and ICAPM 2019 Conference Proceedings have been archived into IOP Journal of Physics: Conference Series, Volumes 814 (2017), 1039 (2018), and 1298 (2019) indexed by ISI Web of Science (Conference Proceedings Citation Index (CPCI), Scopus, Engineering Information (EI), etc. The main objective of the ICAPM 2020 conferences is to provide a major international platform for knowledge exchange and an interactive forum in mathematical theory and calculation, mathematical model construction and method, physics theory and engineering physics, material design and mechanical performance analysis, pure and applied mathematics, engineering mathematics and physics. These are all fascinating topics related to future needs. Selected and important results will also publish in the peer-reviewed conference journals “Journal of Physics: Conference Series” and “IOP Conference Series: Materials Science and Engineering”.We express our thanks and appreciation to our keynote speakers Makoto Iwasaki, Professor and IEEE Fellow, Department of Electrical and Mechanical Engineering, Nagoya Institute of Technology in Japan, Yoshihiko Uematsu, Professor, Department of Mechanical Engineering, Gifu University in Japan, Naoyuki Ishimura, Conference Chair of ICAPM 2020, Professor, Faculty of Commerce, Chuo University in Japan, Kuo-Chih Chuang, Associate Professor, Zhejiang University, China, and all the participants and committee members for all support to ICAPM 2020 All the Session Chairs are also appreciated for assisting in the organization of technical sessions.

"Flood, Prof. John Edward, (2 June 1925–17 Jan. 2011), Professor of Electrical Engineering, 1965–90, then Emeritus, and Head of Department of Electrical and Electronic Engineering, 1967–81 and 1983–89, University of Aston in Birmingham" published on by Oxford University Press.

Continual Quality Improvement Process for Undergraduate Programs

Micro System Engineering Lab. (Kasahara Lab.), Department of Electrical and Electronic Engineering, Faculty of Science and Engineering, Hosei University