Nonlinear state feedback for ℓ 1 optimal control

1 A Survey on Computational Optimal Control.- Issues in the Direct Transcription of Optimal Control Problems to Sparse Nonlinear Programs.- Optimization in Control of Robots.- Large-scale SQP Methods and their Application in Trajectory Optimization.- Solving Optimal Control and Pursuit-Evasion Game Problems of High Complexity.- 2 Theoretical Aspects of Optimal Control and Nonlinear Programming.- Continuation Methods In Boundary Value Problems.- Second Order Optimality Conditions for Singular Extremals.- Synthesis of Adaptive Optimal Controls for Linear Dynamic Systems.- Control Applications of Reduced SQP Methods.- Time Optimal Control of Mechanical Systems.- 3 Algorithms for Optimal Control Calculations.- Second Order Algorithm for Time Optimal Control of a Linear System.- An SQP-type Solution Method for Constrained Discrete-Time Optimal Control Problems.- Numerical Methods for Solving Differential Games, Prospective Applications to Technical Problems.- Construction of the Optimal Feedback Controller for Constrained Optimal Control Problems with Unknown Disturbances.- Repetitive Optimization for Predictive Control of Dynamic Systems under Uncertainty.- Optimal Control of Multistage Systems Described by High-Index Differential-Algebraic Equations.- A New Class of a High Order Interior Point Method for the Solution of Convex Semiinfinite Optimization Problems.- A Structured Interior Point SQP Method for Nonlinear Optimal Control Problems.- 4 Software for Optimal Control Calculations.- Automated Approach for Optimizing Dynamic Systems.- ANDECS: A Computation Environment for Control Applications of Optimization.- Application of Automatic Differentiation to Optimal Control Problems.- OCCAL: A mixed symbolic-numeric Optimal Control CALculator.- 5 Applications of Optimal Control.- A Robotic Satellite with Simplified Design.- Nonlinear Control under Constraints of a Biological System.- An Object-Oriented Approach to Optimally Describe and Specify a SCADA System Applied to a Power Network.- Near-Optimal Flight Trajectories Generated by Neural Networks.- Performance of a Feedback Method with Respect to Changes in the Air-Density during the Ascent of a Two-Stage-To-Orbit Vehicle.- Linear Optimal Control for Reentry Flight.- Steady-State Modelling of Turbine Engine with Controllers.- Shortest Paths for Satellite Mounted Robot Manipulators.- Optimal Control of the Industrial Robot Manutec r3.

In this paper, we present an optimal control approach using Linear Matrix Inequalities (LMIs) for trajectory tracking control of a three-wheeled omnidirectional mobile robot in the presence of external disturbances on the robot's actuators and noise in the robot's sensor measurements. First, a state-space representation of the omnidirectional robot dynamics is derived using a point-mass dynamic model. Then, we propose an LMI-based full-state feedback H <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">∞</sub> -optimal controller for the tracking problem. The robot's tracking performance with the H <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">∞</sub> -optimal controller is compared to its performance with a classical full-state feedback tracking controller in simulations with circular and bowtie-shaped reference trajectories. In order to evaluate our proposed controller in practice, we also implement the H <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">∞</sub> -optimal and classical controllers for these reference trajectories on a three-wheeled omnidirectional robot. The H <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">∞</sub> -optimal controller guarantees stabilization of the robot motion and attenuates the effects of frictional disturbances and measurement noise on the robot's tracking performance. Using the H <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">∞</sub> -optimal controller, the robot is able to track the reference trajectories with up to a 47.8% and 45.8% decrease in the maximum pose and twist errors, respectively, over a full cycle of the trajectory compared to the classical controller. The simulation and experimental results show that our LMI-based H <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">∞</sub> -optimal controller is robust to undesired effects of disturbances and noise on the dynamic behavior of the robot during trajectory tracking and can outperform the classical controller in attenuating their effects.

The dynamic linear state feedback control problem is addressed for a class of nonlinear systems subject to time-delay. First, using the dynamic change of coordinates, the problem of global state feedback stabilization is solved for a class of time-delay systems under a type of nonhomogeneous growth conditions. With the aid of an appropriate Lyapunov-Krasovskii functional and the adaptive strategy used in coordinates, the closed-loop system can be globally asymptotically stabilized by the dynamic linear state feedback controller. The growth condition in perturbations are more general than that in the existing results. The correctness of the theoretical results are illustrated with an academic simulation example.

The centralized paradigm of a single controller and a single plant upon which modern control theory is built is no longer applicable to modern cyber-physical systems of interest, such as the power-grid, software defined networks or automated highways systems, as these are all large-scale and spatially distributed. Both the scale and the distributed nature of these systems has motivated the decentralization of control schemes into local sub-controllers that measure, exchange and act on locally available subsets of the globally available system information. This decentralization of control logic leads to different decision makers acting on asymmetric information sets, introduces the need for coordination between them, and perhaps not surprisingly makes the resulting optimal control problem much harder to solve. In fact, shortly after such questions were posed, it was realized that seemingly simple decentralized optimal control problems are computationally intractable to solve, with the Wistenhausen counterexample being a famous instance of this phenomenon. Spurred on by this perhaps discouraging result, a concerted 40 year effort to identify tractable classes of distributed optimal control problems culminated in the notion of quadratic invariance, which loosely states that if sub-controllers can exchange information with each other at least as quickly as the effect of their control actions propagates through the plant, then the resulting distributed optimal control problem admits a convex formulation. The identification of quadratic invariance as an appropriate means of convexifying distributed optimal control problems led to a renewed enthusiasm in the controller synthesis community, resulting in a rich set of results over the past decade. The contributions of this thesis can be seen as being a part of this broader family of results, with a particular focus on closing the gap between theory and practice by relaxing or removing assumptions made in the traditional distributed optimal control framework. Our contributions are to the foundational theory of distributed optimal control, and fall under three broad categories, namely controller synthesis, architecture design and system identification. We begin by providing two novel controller synthesis algorithms. The first is a solution to the distributed H∞ optimal control problem subject to delay constraints, and provides the only known exact characterization of delay-constrained distributed controllers satisfying an H∞ norm bound. The second is an explicit dynamic programming solution to a two player LQR state-feedback problem with varying delays. Accommodating varying delays represents an important first step in combining distributed optimal control theory with the area of Networked Control Systems that considers lossy channels in the feedback loop. Our next set of results are concerned with controller architecture design. When designing controllers for large-scale systems, the architectural aspects of the controller such as the placement of actuators, sensors, and the communication links between them can no longer be taken as given -- indeed the task of designing this architecture is now as important as the design of the control laws themselves. To address this task, we formulate the Regularization for Design (RFD) framework, which is a unifying computationally tractable approach, based on the model matching framework and atomic norm regularization, for the simultaneous co-design of a structured optimal controller and the architecture needed to implement it. Our final result is a contribution to distributed system identification. Traditional system identification techniques such as subspace identification are not computationally scalable, and destroy rather than leverage any a priori information about the system's interconnection structure. We argue that in the context of system identification, an essential building block of any scalable algorithm is the ability to estimate local dynamics within a large interconnected system. To that end we propose a promising heuristic for identifying the dynamics of a subsystem that is still connected to a large system. We exploit the fact that the transfer function of the local dynamics is low-order, but full-rank, while the transfer function of the global dynamics is high-order, but low-rank, to formulate this separation task as a nuclear norm minimization problem. Finally, we conclude with a brief discussion of future research directions, with a particular emphasis on how to incorporate the results of this thesis, and those of optimal control theory in general, into a broader theory of dynamics, control and optimization in layered architectures.

In this paper, we study the optimal control problem for Takagi–Sugeno (T-S) fuzzy systems with disturbances. Due to the presence of disturbances in the T-S fuzzy systems, a fuzzy optimal state feedback control approach is presented by employing a two-player zero-sum game. Since the analytical optimal control solutions and the worst-case disturbance policies of T-S fuzzy systems can be boiled down to solving the algebraic Riccati equations (AREs), which are difficult to be obtained directly, a model-free policy iteration (PI) learning algorithm is proposed to obtain their approximation solutions. It is proved that the developed fuzzy optimal state feedback controller can ensure the fuzzy systems to be asymptotically stable and satisfy the disturbance attenuation condition simultaneously. Also, the designed PI learning algorithm can converge to their optimal solutions. Finally, we apply the developed fuzzy optimal state feedback control method to the truck-trailer system and the simulation results demonstrated the effectiveness of the developed scheme.

In this study, the problem of finding an optimal controller for nonlinear systems with one input and a reference tracking signal is approached. With the problem's formulation, any desired signal can be tracked instantly with a closed-loop controller without the need for integral terms. Presentation lies at the heart of optimal control. This study, however, does not consider the integral term, allowing tracking and stability to occur naturally. It has a broad scope with a wide range of applications, namely when dealing with affine nonlinear systems, which provide geometric control unification with asymptotic stability in some cases. A common scenario that comes from optimal control involves the minimization of integral cost functionals. Issues like asymptotic stability or even tracking to the desired reference signal have always been the main limitations. In this study, the main theorem allows the solution of optimal control problems with no-integral terms, in other words tracking problems with input/state constraints, providing closed-loop controllers. A DC motor with a pendulum in upright position is an example of an application for which singular optimal control is tested in this study. The results confirm both asymptotic stability and optimal tracking with an accuracy of 95%. The main contributions of this study include an optimal closed-loop controller with no mixed initial/final conditions, input/state constraints, asymptotic stability guarantee, a strong connection with geometric tools and finally the possibility to generalize to systems with multiple inputs. As a conclusion, general nonlinear control systems can be included in the optimal control methodology presented in this study including input/state constraints. Due to the lack of integral terms, the problem can be solved in closed form by using an optimal closed-loop controller.

This paper is concerned with the optimal output synchronization control problem for a class of heterogeneous complex dynamical networks (CDNs) with partially unknown system dynamics. By defining a new quadratic performance index including the information of state couplings, an optimal controller consisting of a feedback control and a compensated feedforward control is then designed. A necessary and sufficient condition for the optimal control minimizing the quadratic performance index is established. Especially, an algebraic Riccati equation (ARE) associated with a discount factor is obtained, and a novel online iteration algorithm by iteratively solving the ARE is proposed to compute the optimal controller gain for the case that the CDNs are with partially unknown system dynamics. Moreover, it is proved that the output synchronization errors converge to zero asymptotically by applying the optimal control laws. Finally, two simulation examples are provided to verify the effectiveness of the proposed control method.

This paper investigates the robust optimal control problem of a class of continuous-time, partially linear, interconnected systems. In addition to the dynamic uncertainties resulted from the interconnected dynamic system, unknown bounded disturbances are taken into account throughout the learning process, wherein the system’s dynamics and the disturbances are assumed unknown. These challenges lead the collected online data to be imperfect. In this scenario, traditional data-driven control techniques, such as adaptive dynamic programming (ADP) and robust ADP, encounter a challenge in approximating the optimal control policy precisely due to imperfect data and computational errors. In this paper, a novel data-driven robust policy iteration method is proposed to simultaneously solve the robust optimal control problems. Without relying on the knowledge of the system’s dynamics, the external disturbances or the complete state, the implementation of the proposed method only needs to access the input and partial state information. Based on the small-gain theorem, the notions of strong unboundedness observability and input-to-output stability, it is guaranteed that the learned robust optimal control gain is stabilizing and that the solution of the closed-loop system is uniformly ultimately bounded despite the existence of dynamic uncertainties and unknown external disturbances. The simulation results reveal the efficiency and practicality of the proposed data-driven control method. <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">Note to Practitioners</i> —This work is motivated by the use of reinforcement learning to improve the quality of designing adaptive optimal controllers for engineering applications. Adaptive dynamic programming methods, in particular policy iteration (PI), are widely used in solving optimal control problems. However, due to the iterative nature of PI, the approximated optimal control policy may be inaccurate and imprecise. Especially, when using imperfect system’s measurements instead of the modelling information. This can result in causing the learned control policy to deviate from the actual optimal policy. This becomes more challenging in the existence of dynamic uncertainties and unknown external disturbances which corrupt the measurements and result in imperfect data. This work investigates the conditions on the uncertainties such that the proposed novel data-driven PI algorithm is robust to system’s uncertainties, unknown external disturbances and imperfect measurements. The approximated robust optimal control policy performs robustly in the existences of imperfect data and uncertainties, and at the same time is close enough to the optimal control policy.

Optimal yaw moment control law for improved vehicle handling

An optimal control method for distributed parameter systems is developed and applied to active vibration control of a plate. Piezoelectric material is used as an actuator. The structural dynamics are modeled using the space—time assumed mode expansion technique (a Rayleigh—Ritz method applied to both time and space variables). In particular, the generalized coordinates (both mechanical and electrical) and all generalized forces are described in terms of expansion functions. Using Hamilton's law of varying action along with the space—time assumed mode expansion results in algebraic equations of motion. These are then used as the constraint equations in the optimal controller design. Using space—time expansion, the usual variational optimal control problem is transformed into an equivalent algebraic problem. Optimal solutions are then obtained in a closed form and the solution is global within the time period considered. The solution procedure does not lead to a Riccati equation as is the case in the conventional optimal control solutions. The direct optimal control problem of a vibrating plate is illustrated through simulations where a parametric study is undertaken to check the controller performance. This study shows that the developed optimal control method is simple and the structure—control interaction is an inherent property of the method.

In this paper, the problem of the robust optimal control (ROC) for a class of nonlinear systems with uncertainties and external disturbances is studied. For this purpose, the State Dependent Riccati Equation (SDRE) is considered as a solution of the ROC. The proposed method is to transform a robust control problem into an optimal control problem, where the uncertainties and disturbances are reflected in the performance index. Hence, the performance index is selected as an energy function and using the proposed constraints in this paper the Lyapunov stability for this class of nonlinear systems is proved and the robust optimal controller is designed. In order to illustrate the high capability of the ROC method in optimal control of complex systems such as Hyper-chaotic system, the time response of state variables in the proposed method and the Global Robust Optimal Sliding Mode Control (GROSMC) method are compared together. The simulation results show that the time response of state variables in the ROC method is more sufficient than the GROSMC method.

In this paper, the nonlinear optimal control problem is investigated for spacecraft formation flying with collision avoidance. Based on a nonlinear model of formation flying, two optimal tracking control laws are proposed to ensure the formation pattern converges to the predetermined configuration. The first optimal control law which combines Lyapunov optimizing control with a trajectory-following optimization technique is developed to solve the finite-time nonlinear optimal control problem. For the second controller, an extended [Formula: see text]-[Formula: see text] method is applied to design a closed-form feedback control scheme for nonlinear control problem of spacecraft formation flying with non-standard cost functions. By taking into account the flying safety, a repulsive control scheme is incorporated in the optimal controller to ensure collision avoidance and minimize the performance index. Finally, a numerical example is performed to demonstrate the effectiveness of the proposed approaches.

The state feedback linear-quadratic optimal control problem for asymptotic stabilization has been extensively studied in the literature. In this paper, the optimal linear and nonlinear control problem is extended to address a weaker version of closed-loop stability, namely, semistability, which involves convergent trajectories and Lyapunov stable equilibria and which is of paramount importance for consensus control of network dynamical systems. Specifically, we show that the optimal semistable state-feedback controller can be solved using a form of the Hamilton-Jacobi-Bellman conditions that does not require the cost-to-go function to be sign-definite. This result is then used to solve the optimal linear-quadratic regulator problem using a Riccati equation approach.

Turnpike results hold a central position in the area of applied mathematics, offering profound insights into the long-time behavior of optimal control systems. They play an important role in guiding decision-making processes in dynamic systems. Often dynamic systems depend on uncertain data and/or parameters. In this paper, optimal boundary control problems for the transport equation with random initial data and random source term are considered. The paper begins with the numerical analysis of the turnpike phenomenon for an optimal boundary control problem with nonlinear time-varying feedback control, where the initial data are perturbed by randomized Fourier series and the source term is perturbed by a random variable. Further, an integral turnpike result is presented for the optimal controls and the corresponding optimal states of an optimal boundary control problem with random initial data. A turnpike result is also presented for an optimal boundary control problem governed by a transport equation with random source term, where optimal control, optimal expected state, and variance satisfy an integral turnpike inequality. The turnpike constant, the expected value, and the variance are further specified for Gaussian and uniformly distributed random variables.

The authors present a state-space solution to the discrete H/sub 2/ control problem and give direct formulas for an H/sub 2/-optimal sampled-data control problem with state feedback and disturbance feedforward using the powerful lifting technique. The discrete-time H/sub 2/-optimal control is first treated via state feedback and disturbance feedforward and then via dynamic output feedback. New direct formulas for a sampled-data H/sub 2/ problem using state measurement are presented. The optimal sampled-data control is applied to a two-motor system and a comparison is made with the optimal analog control. >