Optimal feature selection using modified cuckoo search for classification of power quality disturbances

This paper deals with a modified technique for the recognition of single stage and multiple power quality (PQ) disturbances. An algorithm based on Stockwell's transform and artificial neural network-based classifier and a rule-based decision tree is proposed in this paper. The analysis and classification of single stage PQ disturbances consisting of both events and variations such as sag, swell, interruption, harmonics, transients, notch, spike, and flicker are presented. Moreover, the proposed algorithm is also applied on multiple PQ disturbances such as harmonics with sag, swell, flicker, and interruption. A database of these PQ disturbances based on IEEE-1159 standard is generated in MATLAB for simulation studies. The proposed algorithm extracts significant features of various PQ disturbances using S-transform, which are used as input to this hybrid classifier for the classification of PQ disturbances. Satisfactory results of effective recognition and classification of PQ disturbances are obtained with the proposed algorithm. Finally, the proposed method is also implemented on real-time PQ events acquired in a laboratory to confirm the validity of this algorithm in practical conditions.

This paper develops a knowledge-based neural network (KBNN) for the classification of power quality (PQ) disturbances. Initially, the tunable-q wavelet transform (TQWT) is employed for the extraction of the 50 Hz component from a voltage signal with any sort of disturbance. This is achieved by varying the quality factor of wavelet according to the signal information. The KBNN is a combined model of neural network and rule-based approach. This paper explores the potential of the KBNN for classification of the most common power quality disturbances. The efficacy of the KBNN approach is evaluated on a wide range of time-varying signals with noise, fundamental frequency deviation, and variation in signal parameters. The performance analysis elucidates the efficiency and robustness of the proposed approach using KBNN classifier for classification of the normal and eight PQ disturbances.

The classification of power quality (PQ) disturbances to improve the PQ is an important issue in utilities and industrial factories. In this paper, an approach to classify PQ disturbances is presented. First, a signal containing one of the PQ disturbances, like sag, swell, flicker, interruption, transient, or harmonics, is evaluated using the proposed approach. Afterwards, S-transform and TT-transform are applied to the signal and an artificial neural network is used to recognize the disturbance using S-transform and TT-transform data, like the variance and mean values of S-transform and TT-transform matrices. The main features of the proposed approach are the real-time and very fast recognition of the PQ disturbances. Finally, the proposed method's results are compared with the support vector machine and k-nearest neighbor classification methods to verify the results. The results show the effectiveness of this state-of-the-art approach.

Identifying power quality (PQ) disturbances is an important prerequisite for developing mitigation measures to improve PQ. However, the coupling of multiple PQ disturbances in the noise condition makes it difficult to achieve effective feature extraction and classification. This article proposes a novel method to identify multiple PQ disturbances by integrating improved TQWT with XGBoost algorithm. The improved TQWT is proposed to automatically select the proper tuning parameters by screening the spectral information of PQ signals. Then, the improved TQWT is used to decompose PQ disturbances into sub-bands for further feature extraction. Optimum feature selection and classification are implemented in XGBoost. Classification accuracies of 26 categories of synthetic PQ disturbances under different noisy levels are tested and compared with existing methods. Results indicate that the proposed method is efficient and noise-resistant, and the classification accuracy can reach 97.63% under 20 dB noise, and keep above 99% under lower level noise.

A novel ensemble neural network structure is presented for automatic classification of power quality disturbances. Power quality (PQ) disturbances analysis is the focus of power quality control. The characteristics of PQ disturbances include short duration, variety of types and so on. Power quality disturbances classification is the foundation of power quality control automation. Different types of Neural network, such as BP neural networks, RBF neural networks and probabilistic neural network etc, is already applied in the area of PQ disturbances classification and recognition. The researches about the neural network for PQ disturbances recognition are mainly focused on the optimizing for the signal type of neural network. But the accuracy rate of the classification is still needed to be improved. Ensemble and hybrid algorithms research is currently flourishing in pattern classification machine learning and decision sciences. Compare to traditional NN, the ensemble and hybrid NN classifier achieves higher classification rate. In this paper, a novel PQ classification system using S-transform and ensemble and hybrid NN is designed. There are 2 stages in the novel system. Firstly, the PQ disturbances signals are transformed by S-transform and the subset of features extracted from the result of S-transform is used as the input vector of the ensemble and hybrid NN. Secondly in the pattern classification process, BP network and RBF neural network are utilized as two classification agents. Through choosing different parameters and different samples, every agent includes a group of neural networks. The classification results, generated by different agents, are fuzzified into fuzzy numbers. The centroid of all fuzzy numbers is compared with the threshold. Finally we obtain the classification results. In the simulation, 6 types of disturbances signals which are simulated by Matlab 7.0 use for test the new classification system. Simulation result shows that when the new system has better classification rate especially at the high noising environment.

ABSTRACTThis paper presents a newly developed compressive sensing (CS), maximum likelihood (ML), and rule-based method for classification of power quality disturbances (PQDs). The first PQD signals are sampled using compressive sampling method and reduced PQD signal dimensionally, and then the data are directly used as features for the classification. PQD signals are divided into two groups: at first, impulsive, oscillatory, harmonics notch, flicker and DC offset, and the second, sag, swell, and interruption. Compressive sensing maximum likelihood (CSML) classifier is used for the classification of the first group and the rule-based method is used for the classification of the second group. CSML classifier and the rule-based method are tested utilizing 1000 PQD events under noiseless and noisy environment. About 100% correct classification rate is achieved without noise and 99.8% correct classification result is obtained with noise. In both methods, noise was considered from 20 to 40 dB. Results show that the proposed CS and ML algorithms and rule-based method can be efficiently used for PQD classification.

Power Quality (PQ) monitoring in a systematic and automated way is the important issue to prevent detrimental effects on power system. The development of new methods for the automatic classification of PQ disturbances is at present a major concern. This paper presents a novel approach of automatic detection and classification of single and hybrid PQ disturbances using Discrete Wavelet Transform (DWT) and Modular Probabilistic Neural Network (MPNN). The automatic classification of the PQ disturbances consists of three stages i) data generation, ii) feature extraction and iii) disturbance classification. The data is generated by synthetic models of single and hybrid PQ disturbance signals based on IEEE 1159 standard. DWT with multiresolution analysis was applied for feature extraction from the PQ waveforms. The entropy and energy features extracted from the detail and approximation coefficients were applied as the training and testing data to MPNN in order to accomplish the automatic classification process. The effectiveness of the proposed algorithm has been validated by using a typical real-time underground distribution network in Malaysia which was simulated in PSCAD/EMTDC power system software to generate PQ disturbances. The simulation results show that the classifier has an excellent performance in terms of accuracy and reliability even in the case of PQ signals under noisy condition.

To address the inadequate time-frequency analysis of the S-transform and the low accuracy of traditional Power Quality Disturbance (PQD) classification methods, this paper presents a classification method based on Iterative Filtering Kaiser Window S-Transform (IFKST) and Newton-Raphson-Based Optimizer to optimize Extreme Gradient Boosting (NRBO-XGBoost). Firstly, the iterative loop filtering interval positioning algorithm extracts frequency feature points of disturbance signal. Then the K-S transform is applied to each feature point. Finally, 17 time-frequency features are extracted from the IFKST resulting matrix, and the hyperparameters of Extreme Gradient Boosting are optimized using the Newton-Raphson-based optimizer. The 17 disturbance features are then input into the model to achieve PQDs classification. Experimental results show that this method can classify 21 types of power quality disturbances with high accuracy in noisy environments.

Power quality gains more and more attentions because disturbances in power quality may damage equipment security, power availability and system reliability in power system. Detection and classification of the power quality disturbances is the first step before taking measures to lessen their harmful effects. Common methods to classify power quality disturbances includes signal processing methods, machine learning methods and deep learning methods. Signal processing methods are good at feature extraction, while machine learning methods and deep learning methods are expert in multi-classification tasks. Via combing their respective advantages, this paper proposes a combined method based on variational mode decomposition and convolutional neural networks, which needs a small quantity of samples but achieves high classification precision. The proposed method is proved to be a qualified and competitive scheme for the detection and classification of power quality disturbances.

Power quality (PQ) has received the attention of several research groups due to the impact of PQ disturbances (PQDs) and how they affect the operation of the electrical equipment connected to the grid, especially in industrial and healthcare facilities. The monitoring and analysis of PQD are generally performed with specialized measuring equipment, such as power analyzers, based on the standards. However, this equipment is not suited to perform continuous monitoring and classification of PQD, and it cannot be configured to perform further analysis of the monitored signal. Smart sensors, on the other hand, can provide the functionality that the standard equipment cannot, by integrating several signal processing modules that can be reconfigured using a reconfigurable technology, such as field programmable gate arrays (FPGAs). This paper presents the development of an FPGA-based smart sensor that integrates the processing cores of higher order statistics (HOS) to provide a signal analysis aimed to detect and quantify PQD on electrical installations and an artificial neural network to classify the PQD. Experimentation is performed on the electrical installation in hospital facilities. Results from the HOS processing of electrical signals show that these processing methodologies are suitable for the quantification and classification of PQD on electrical installations.

The integration of distributed generation (DG) systems to smart grids is a significant issue to achieve a reliable and stable grid operation. Many countries have established some electrical criteria and quality standards defined as grid-codes taking into consideration these electrical requirements. This chapter presents signal processing (SP)-based and artificial intelligence (AI)-based power quality disturbances (PQDs) detection and classification methods used in smart grids. In the first section, SP-based PQDs detection methods used in smart grids are classified, and then wavelet transform (WT)-based detection methods are presented. Current WT-based methods are introduced for the detection of PQDs. Some PQD events are investigated in MATLAB Simulink by using the developed discrete WT method. The classification of PQDs with AI-based methods are also discussed in the last section. Deep neural networks (DNNs) are presented in the chapter to show the effectiveness of AI-based methods. A hybrid method based on DWT and feed-forward deep neural network (FDNN) is proposed for the classification of PQDs occurring in grid-connected PV systems. The results show that the proposed hybrid WT and FDNN methods classifying nine classes of PQDs have a 99.13% accuracy in the proposed DG system. Consequently, the discussed methods, proposed algorithms, and the obtained results in this chapter will contribute to selecting the proper detection or classification of PQD methods using AI-based methods in smarts grids.

This paper presents a method that combines discrete S-transform (DST) time-frequency distribution (TFD) and local binary pattern (LBP) based image analysis technique for classifying power quality (PQ) disturbances. The purpose of this combination is to extract discriminative features by utilizing from both capability of generating the compact TFD of a non-stationary signal and the efficient image representation capability of LBP. In the proposed method, DST based TFDs of PQ disturbance signals are considered as 2-D images. LBP histograms are used to extract the features from TF images. Initially, the uniform patterns in TF images are obtained by the LBP operator. Next, the occurrence histograms of these patterns are used to produce representative feature vectors that can capture the unique and salient characteristics of each disturbance. The classification performance of the proposed method is evaluated through total 2400 disturbance signals. The experimental results have shown that the rate of correct classification is about 98 % for the different PQ disturbances.

This study presents a novel technique for automated power quality (PQ) disturbance detection and classification in power distribution system using cross‐correlation‐based approach in conjunction with fuzzy logic. The proposed method requires minimum number of features when compared with conventional approaches for identification of disturbances. Total 17 types of PQ disturbances including eight basic and nine combinations which are very close to real situations are considered for the classification. The scheme is immune to real life uncorrelated noises due to incorporation of cross spectrum analysis in the feature extraction stage. Experimentation under real operating conditions is carried out in the laboratory using data acquisition system in order to test the proposed technique. The proposed scheme is also applied in IEEE 33‐bus distribution system and validated by a real‐time simulator. The developed classifier achieved 100% accuracy and could comfortably outperform several contemporary methods for PQ disturbance classification.

Nowadays, due to the increase in the demand for electrical energy and the development of technology, the electrical devices have a more complex structure. This situation has increased the importance of concept of the power quality in the electrical power system. This paper presents a deep learning-based system to recognize the power quality disturbances (PQDs) in the solar photovoltaic (SPV) plant integrated with power system networks. The PQDs are analyzed using continuous wavelet transform (CWT) and image files are obtained from scalograms of CWT. Then, these image files are used to recognize PQDs with the help of a hybrid deep learning approach based on convolutional neural network (CNN), neighbor component analysis (NCA), and support vector machine (SVM). In this hybrid deep learning approach, the image files are given as input to AlexNet and GoogLeNet. The NCA is applied to the features obtained from the last dropout layer of each architecture. The distinctive features obtained from the NCA process are classified using the SVM algorithm. In order to evaluate the proposed approach, PQD data are obtained from a modified IEEE 13-bus test system including the SPV system. Several analyses and comparisons are carried out to verify the success of the proposed approach. It has been found that the proposed hybrid deep learning approach has the ability to accurately recognize the PQDs even if the SPV plant integrated power system has a negative effect on power quality.

The widespread integration of renewable energy sources (RESs) into power systems using power electronics-based interface devices has led to a substantial rise in power quality (PQ) issues. There is an immediate requirement for effective monitoring, detection, and classification of power quality disturbances (PQDs) that is needed to take remedial measures and design planning of the system architecture. This study presents a hybrid approach with an objective for the feature extraction and classification of PQDs. The proposed hybrid approach is comprised of an optimized tunable-Q wavelet transform (OTQWT) for the feature extraction and incremental support vector machine (ISVM). A four-stage approach is suggested for the PQ detection and classification in this study. In the first stage, the various data are retrieved both in the form of synthetic data by mathematical formulations and real-time data with prototype design setup. In the second stage, regardless of the specified wavelet function, the PQD signals are decomposed into low-pass and high-pass sub-bands using the tunable-Q wavelet transform (TQWT). However, the utilization of default decomposition parameters to address nonstationary PQ signals may lead to information loss and reduced performance of the system. To avoid this limitation, an OTQWT as an enhanced technique to TQWT based on an Adaptive Particle Swarm Optimization (APSO) is suggested. A modified objective function based on the mean square error (MSE) is used to improve the decomposition process. In the third stage, an efficient classifier is suggested based on the ISVM. Lastly, to test and evaluate the performance of the proposed approach, twelve types of PQDs including noise and multiple occurrences are considered. The comparative analysis with other popular methods reflects the better performance of the proposed approach and justifies its use for PQ detection and classification purposes in real-time​ conditions.