Optimized Tamm-plasmon structure by Differential Evolution algorithm for single and dual peaks hot-electron photodetection

The AlGaAs photocathode can be used in the field of underwater optical communication because of its fast response speed and adjustable spectral response range. In order to solve the problem that the low light absorption of the AlGaAs emission layer limits the improvement of its quantum efficiency, the distributed Bragg reflector (DBR) structure is used to reflect the light at a specific wavelength back to the emission layer to further increase the absorption rate, thus improving the response capability of the photocathode at 532 nm. The spectral response model of the AlGaAs photocathode with DBR structure is obtained by solving one-dimensional continuity equation. The optical model of the AlGaAs photocathode with enhanced response at 532 nm is established by the finite-difference time-domain method. The effects of the sublayer periodic pairs, the sublayer material and the thickness of emission layer and buffer layer on the absorption rate of emission layer are analyzed. The light absorption distributions of AlGaAs photocathode with and without DBR structure are compared, and the influence mechanism of DBR structure on the blue-green light absorption capacity of AlGaAs photocathode emission layer is clarified, which can provide a theoretical basis for designing its structural parameters. The results show that the DBR structure with a periodic pair of 20 and Al<sub>0.7</sub>Ga<sub>0.3</sub>As/AlAs has the best reflection effect on 532 nm light. Based on the DBR structure, when the thickness of the emission layer and buffer layer are 495 nm and 50 nm, respectively, the emission layer has the best absorption rate of 532 nm light. Furthermore, two kinds of AlGaAs photocathodes with and without DBR structure are prepared by the metal-organic chemical vapor deposition technology, and the reflectivity and profile structure of the grown samples are characterized. Then the Cs/O activation experiments are performed to compare the spectral response curves. It is found that the spectral response of the AlGaAs photocathode sample with DBR structure at 532 nm wavelength is about twice that of the sample without DBR structure.

The Differential Evolution (DE) algorithm, under the family of Evolutionary Algorithms (EAs), is one of the powerful algorithms used for solving continuous parameter optimization challenges. The simplistic nature and robustness of the classical DE algorithm have drawn researchers' attention towards its progressive enhancement. This work reports on an investigation of the behavioral changes of the classical DE algorithm, evoked when its mutation and crossover components are fine tuned for enhancement of DE's performance. The scope of this study covers the implementation of a mutation level enhancement and a crossover level enhancement, followed by their integration. The mutation and the crossover components are augmented by incorporation of Centroid DE and Superior-Superior & Superior-Inferior DE logics, respectively. The algorithms appraised in this inquiry were classical DE, Centroid based DE(cDE), Superior-Superior based DE (ssDE), Superior-Inferior DE (siDE), Centroid Superior-Superior DE (cssDE) and Centroid Superior-Inferior DE (csiDE). These algorithms were evaluated by comparison of the values of their mean objective function (MOV), and their speed, at solving the global optimization problems in a simple benchmarking function suite with 4 functions of different categories. The study concludes that the DE algorithm shows enhancement performance with modified mutation and crossover components. However, with a trend for inconsistency for varying values of its control parameters and benchmarking problems.

Application of a Derivative-Free Method with Projection Skill to Solve an Optimization Problem

In recent years, Differential Evolution (DE) algorithm that is one of the most important delegate of the evolutionary algorithms have been successfully used for solving different optimization problems with its both serial and parallel variants. In this study, the performance of DE algorithm powered with cooperative emigrant creation strategy was investigated over the different types of numerical problems and obtained results were compared with the results of the serial DE and parallel DE algorithm supported with conventional emigrant creation strategy. Experimental studies showed that the convergence speed of the parallel DE algorithm is significantly improved with the cooperative emigrant creation strategy and the proposed parallel DE algorithm produces better results compared to the serial DE algorithm and parallel DE algorithm with the conventional emigrant creation strategy.

Regulation-based formulas and improved Differential Evolution(DE) algorithm is used to optimize PID parameters. In order to improve the global search ability and the convergence rate of the common DE algorithm, self-adaptive method is introduced to obtain DE parameters. On the other hand, initial population quality of DE algorithm has important influence on convergence of the algorithm. So the regulation-based formulas are used to guide the production of initial population, which is good to improve the convergence rate and realize obtaining of PID parameters completely adaptive without any personal experience. The simulation is developed on steam temperature system of cycle fluidized bed boiler with serious parameter uncertainties and many disturbance and long-time delay. The results show that the improved DE algorithm has higher optimal speed, small amount of calculation and effective optimization of parameters. The proposed method has better control quality and system robustness.

A self-competitive mutation strategy for Differential Evolution algorithms with applications to Proportional–Integral–Derivative controllers and Automatic Voltage Regulator systems

In this work, a method to control the parameters of Differential Evolution (DE) algorithm is proposed. Here the control parameters of DE are co-evolved by Particle Swarm Optimization (PSO) algorithm. The classical DE algorithm has two main control parameters: Scale Factor (F) and Cross-over Rate (CR). These are selected on trial-and-error basis for solving optimization problems. Several optimization problems lead to optimal or sub-optimal solution by proper selection of control parameters of the DE algorithm. In this proposed method, PSO algorithm is used to tune the scale factor and cross-over rate in DE algorithm. Basically PSO algorithm is used as a meta-optimizer for DE algorithm. The proposed method is termed as mPSO-DE in this paper. The mPSO-DE algorithm is applied on 12 benchmark unconstrained optimization problems. The obtained results are compared with that of classical DE algorithm. From the experimental studies, it has been found that the proposed mPSO-DE algorithm performed better than DE algorithm.

Determining the optimal location of wells with the aid of an automated search algorithm is a significant and difficult step in the reservoir development process. It is a computationally intensive task due to the large number of simulation runs required. Therefore,the key issue to such automatic optimization is development of algorithms that can find acceptable solutions with a minimum number of function evaluations. In this study, the Differential Evolution (DE) algorithm is applied for the determination of optimal well locations. DE is a stochastic optimization algorithm that uses a population of solutions which evolve through generations to reach the global optimum. To investigate the performance of this algorithm, three example cases are considered which vary in dimension and complexity of the reservoir model. For each case, both DE algorithm and the widely used Genetic Algorithm (GA) are applied to maximize a Modified Net Present Value (MNPV) as the objective function. It is shown that DE outperforms GA in all cases considered, though the relative advantage of the DE vary from case to case. These results are very promising and demonstrate the applicability of DE for this challenging problem.

Differential evolution (DE) algorithm is a global optimization algorithm over continuous search space. DE also has been applied in many fields, such as artificial neural networks, chemical engineering, mechanical design, robotics, signal processing, biological information, and economics. At the same time, as a powerful evolutionary algorithm for solving global numerical optimization problems, the DE algorithm has drawn more and more attention. However, how to make a proper balance between the global and local search is a burning question and to limit the optimization performance of DE. In this paper, an improved algorithm η_CODE with a new η_Cauchy operator is proposed to enhance the global and local search ability of a well-known DE variant JADE. In order to guarantee the effective performance of the proposed operator, all the fitness values are ranked through a ranking scheme based on increasing order before a new η_Cauchy operator is conducted. The pNP individuals that have better fitness are selected and carried out Cauchy disturbance operation considering the complexity of the algorithm. The Dynamic parameter mechanism is utilized to select pNP individuals that number is also adjusted dynamically in each generation. The scale factor F and crossover probability CR are obtained with Lehmer mean without using determined parameter c in JADE, which aims to balance the exploration and exploitation of the algorithm during the running time. A total of sixty benchmark functions from CEC2014 and CEC2017 on real parameter optimization are employed to prove the validity of η_CODE for solving complex high-dimensional problems. The experiments indicate that η_CODE is better than or at least comparable with several state-of-the-art DE variants, including JADE, SinDE, TSDE, AGDE, and EFADE in the global numerical optimization problems. In order to further analyze the performance of η_CODE, we also select extra two high-powered modified algorithms called EBLSHADE and LSHADESPACMA based on LSHADE to discuss advantages and disadvantages of the proposed algorithm.

Differential evolution (DE) is a well-known evolutionary algorithm which has been successfully applied in many scientific and engineering fields. In most DE algorithms, the base and difference vectors for mutation are randomly selected from the current population. That is, the useful population information cannot be fully exploited to guide the search of DE through mutation. Furthermore, the selection of parents in mutation has been verified to be critical for the DE performance. Therefore, to alleviate this drawback and improve the performance of DE, a novel DE algorithm with a directional mutation based on cellular topology is proposed in this study. This proposed algorithm is named as Cellular Direction Information based DE (DE-CDI). In DE-CDI, the cellular topology is employed first to define a neighborhood for each individual of population and then the direction information based on the neighborhood is incorporated into the mutation operator. In this way, DE-CDI not only utilizes the neighborhood information to exploit the regions of better individuals and accelerate convergence, but also introduces the direction information to guide the search to the promising area. To evaluate the performance of the proposed method, DE-CDI is applied to the original DE algorithms, as well as several advanced DE variants. Experimental results demonstrate the high performance of DE-CDI for most DE algorithms studied.

A differential evolution algorithm with intersect mutation operator

In response to the low accuracy exhibited by the Storm Water Management Model (SWMM), we propose an enhanced Differential Evolution and Bayesian Optimization Algorithm (DE-BOA) . This algorithm integrates the global search capability of the differential evolution algorithm with the local search capability of the Bayesian optimization algorithm, which enables a more comprehensive exploration of the vector solution space. A comparative analysis of various types of rainfall events is conducted. For model calibration and validation, a drainage subzone in Jinshazhou, Guangzhou City, is selected as the research subject. In total, 20 specific rainfall events are selected, and the DE-BOA algorithm outperforms the manual calibration, differential evolution algorithm, and Bayesian optimization algorithm regarding model calibration accuracy. Furthermore, the DE-BOA algorithm exhibits robust adaptability to rainfall events characterized by multiple peaks and higher precipitation levels, with Nash–Sutcliffe Efficiency coefficient values surpassing 0.90. This study’s findings could hold significant reference value for dynamically updating model parameters, thereby enhancing the model simulation performance and improving the accuracy of the urban intelligent water management platform.

This paper presents a new method for optimal design of controllers based on a thought and differential evolution. At first an extensible component library and a performance criteria library are established in the approach. The component library contains different types of system components which may be essential for controller structure. Appropriate components can be selected from the library and then combined to form a controller with richer structure. The performance criteria library includes some common control performance indexes. Users can choose one from it according to performance requirements. Then, the differential evolution algorithm is utilized to optimize the parameters of each component in order to find the optimal solution and ultimately obtain the controller structure and parameters which meet requirements. Simulations were done on different types of control objects. Simulation results show that the controllers designed by the proposed method for different types of control objects generally have better comprehensive performance than the PID controllers designed by conventional methods, differential evolution and genetic algorithm. Validity, stability and generalizability of the proposed method were also tested and verified.

Differential Evolution (DE) is a simple, powerful and easy to use global optimization algorithm. DE has been studied in detail by many researchers in the past years. In DE algorithm trial vector generation strategies have a significant influence on its performance. This research studies that whether performance of DE algorithm can be improved by incorporating selection advancement in effective trial vector generation strategies. A novel advancement in DE trial vector generation strategies is proposed in this research to speeds up the convergence speed of DE algorithm. The proposed fitness proportion based random vector selection DE (FPRVDE) is based on the proportion of individual fitness mechanism. FPRVDE reduces the role of poor performing individuals to enhance it performance capability of DE algorithm. To form a trial vector using FPRVDE, individual based on the proportion of their fitness are selected. FPRVDE mechanism is applied to most commonly used set of DE variants. A comprehensive set of multidimensional function optimization problems is used to access the performance of FPRVDE. Experimental result shows that proposed approach accelerates DE algorithm.

\nThis paper present the parameter identification of damped compound pendulum using differential evolution algorithm. The procedure used to achieve the parameter identification of the experimental system consisted of input output data collection, ARX model order selection and parameter estimation using conventional method least square (LS) and differential evolution (DE) algorithm. PRBS signal is used to be input signal to regulate the motor speed. Whereas, the output signal is taken from position sensor. Both, input and output data is used to estimate the parameter of the ARX model. The residual error between the actual and predicted output responses of the models is validated using mean squares error (MSE). Analysis showed that, MSE value for LS is 0.0026 and MSE value for DE is 3.6601×10-5. Based results obtained, it was found that DE have lower MSE than the LS method.\n