Performance and Outage Probability of RIS‐Aided UAV Communications in NOMA Networks

On performance of multi-RIS assisted multi-user nonorthogonal multiple access system over Nakagami-[formula omitted] fading channels

In this work, we investigate an active reconfigurable intelligent surface (RIS)-aided non-orthogonal multiple access (NOMA)-enabled space-air-ground integrated network (SAGIN) with cognitive radio, leveraging the flexible deployment of an unmanned aerial vehicle (UAV) and the ubiquitous coverage of satellite networks. The UAV serves uplink and downlink users in the secondary network via NOMA and time division multiple access mechanisms, respectively, while satellites provide wireless backhaul for the UAV and primary users. We aim to maximize the weighted sum mean rate and energy efficiency for the secondary network by jointly the optimizing power allocation, the RIS reflection coefficients (RC), the user matching factors, and the UAV trajectory. We propose an alternating optimization framework based on the block coordinate ascent (BCA) technique, which decouples the problem into multiple variable blocks for alternating optimization until convergence. Moreover, we investigate the performance of energy-efficient active RIS with a sub-connected architecture, decoupling the RIS RC optimization into amplification factor and phase shift subproblems to be solved separately. Finally, simulation results validate the effectiveness of the proposed schemes, and demonstrate weakness of passive RIS and rationality and economics of sub-connected active RIS architecture.

Unmanned aerial vehicles (UAVs) are expected to be integrated into future wireless networks to offer services, especially in unreachable or congested areas. To improve the spectral efficiency, non-orthogonal multiple access (NOMA) scheme can be utilised within the UAV communication to allow more users to be covered and associated. The performance of the NOMA-UAVs network is governed by several factors including power allocation, user association and pairing methods. This paper presents an approach that uses multi-armed bandit (MAB) and two-sided matching frameworks to maximize the throughput of multi-UAV-assisted NOMA networks in a decentralized manner. The approach enables the UAVs to propose to the ground users (GUs) without explicit cooperation among the UAVs while the GUs can accept or reject the proposals. To this end, we propose a modified Thompson sampling algorithm that we named decaying epsilon Thompson sampling (<inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\text {D}\epsilon \text {TS}$ </tex-math></inline-formula>) MAB algorithm that is designed to improve the exploration-exploitation tradeoff in the MAB. The performance of the proposed <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\text {D}\epsilon \text {TS}$ </tex-math></inline-formula> MAB algorithm is evaluated against other existing MAB techniques. Simulation results show that the <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\text {D}\epsilon \text {TS}$ </tex-math></inline-formula> algorithm attains faster convergence and improved performance in terms of smaller regret and increased achievable system throughput. The <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\text {D}\epsilon \text {TS}$ </tex-math></inline-formula> MAB algorithm particularly excels in regards of the convergence rate when the number of available action spaces increases.

A novel framework is proposed for the deployment and passive beamforming design of a reconfigurable intelligent surface (RIS) with the aid of non-orthogonal multiple access (NOMA) technology. The problem of joint deployment, phase shift design, as well as power allocation in the multiple-input-single-output (MISO) NOMA network is formulated for maximizing the energy efficiency with considering users particular data requirements. To tackle this pertinent problem, machine learning approaches are adopted in two steps. Firstly, a novel long short-term memory (LSTM) based echo state network (ESN) algorithm is proposed to predict users' tele-traffic demand by leveraging a real dataset. Secondly, a decaying double deep Q-network (D <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> QN) based position-acquisition and phase-control algorithm is proposed to solve the joint problem of deployment and design of the RIS. In the proposed algorithm, the base station, which controls the RIS by a controller, acts as an agent. The agent periodically observes the state of the RIS-enhanced system for attaining the optimal deployment and design policies of the RIS by learning from its mistakes and the feedback of users. Additionally, it is proved that the proposed D <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> QN based deployment and design algorithm is capable of converging within mild conditions. Simulation results are provided for illustrating that the proposed LSTM-based ESN algorithm is capable of striking a tradeoff between the prediction accuracy and computational complexity. Finally, it is demonstrated that the proposed D <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> QN based algorithm outperforms the benchmarks, while the NOMA-enhanced RIS system is capable of achieving higher energy efficiency than orthogonal multiple access (OMA) enabled RIS system.

In this paper, we explore the use of reconfigurable intelligent surface (RIS) in unmanned aerial vehicle (UAV) based multiuser downlink communications, where a flying UAV serves multiple single antenna users through multiple RISs mounted on various buildings. More specifically, we consider the selection of RISs based on the outdated and imperfect channel state information (CSI) of the composite UAV-RIS-User channels at the UAV. After selection process, the UAV communicates to the user via the selected RISs and also with the direct link. Particularly, we derive an infinite series based expression for selection probability of RISs under both the outdated and imperfect CSI of composite channels based selection scheme. We also derive the statistical distribution of instantaneously received signal-to-noise ratio (SNR) under outdated and imperfect CSI conditions of both the direct and composite links at the user. Next, using the derived statistics, we analyze the network’s performance in terms of the average coverage probability (ACP) and average bit error rate (ABER) over the complete UAV flight time. Moreover, we discuss the behavior of ACP and ABER for very small and very large values of UAV transmit power, respectively. It is depicted through numerical results that selecting more RISs from a group of small-sized RISs may not be as advantageous as selecting fewer RISs from a group of large-sized RISs. Moreover, we also demonstrate the effect of several system parameters such as number of RIS reflecting elements, number of selected RISs, the severity of UAV-RIS and RIS-User links, and the severity of imperfect and outdated CSI on the network’s performance. The analytical results are corroborated with Monte-Carlo simulations.

Communication with unmanned aerial vehicles (UAVs) in current terrestrial networks suffers from poor signal strength due to the down-tilt of the access points (APs) that are optimized to serve ground users ends (GUEs). To solve this, one could tilt the AP antenna upwards or allocate more power to serve the UAV. However, this negatively affects GUE downlink (DL) rates. In this paper, we propose to solve this challenge using a reconfigurable intelligent surface (RIS) to enhance the UAV communication while preserving the 3GPP-prescribed downwards antenna tilt and potentially improving the DL performance of the GUE. We show that under conjugate beamforming (CB) precoding and proper power split between GUEs and the UAV at the APs, an RIS with phase-shifts configured to reflect radio signals towards the UAV can significantly improve the UAV DL throughput while simultaneously benefiting the GUEs. The presented numerical results show that the RIS-aided system can serve a UAV with a required data rate while improving the GUEs DL performance relative to that in a CF-MIMO system without a UAV and an RIS. We support this conclusion through simulations under a varying numbers of RIS reflecting elements, UAV heights, and power split factor.

In recent years, unmanned aerial vehicles (UAVs) have become a valuable platform for many applications, including communication networks. UAV-enabled wireless communication faces challenges in complex urban and dynamic environments. UAVs can suffer from power limitations and path losses caused by non-line-of-sight connections, which may hamper communication performance. To address these issues, reconfigurable intelligent surfaces (RIS) have been proposed as helpful technologies to enhance UAV communication networks. However, due to the high mobility of UAVs, complex channel environments, and dynamic RIS configurations, it is challenging to estimate the link quality of ground users. In this paper, we propose a link quality estimation model using a gated recurrent unit (GRU) to assess the link quality of ground users for a multi-user RIS-assisted UAV-enabled wireless communication system. Our proposed framework uses a time series of user channel data and RIS phase shift information to estimate the quality of the link for each ground user. The simulation results showed that the proposed GRU model can effectively and accurately estimate the link quality of ground users in the RIS-assisted UAV-enabled wireless communication network.

Unmanned aerial vehicle (UAV) communication has been deemed as a promising technology to collect data for the Internet of Things (IoT) in inaccessible areas. However, due to the limited UAV flight time, traditional UAV communication may not be competent for large-scale IoT data collection. This paper considers integrating non-orthogonal multiple access (NOMA) into UAV communication systems to collect data for large-scale IoT devices within UAV flight time. We aim to minimize the total energy consumption of IoT devices while ensuring data collection, by jointly optimizing UAV trajectory, IoT device scheduling and transmit power. The formulated problem is a mixed integer non-convex problem, which is challenging to solve in general. We propose a data collection optimization algorithm (DCOA) to solve it by applying the Generalized Benders Decomposition (GBD) and successive convex approximation (SCA) techniques. Then, a greedy algorithm (GA) is also proposed to reduce complexity by simplifying the optimization of UAV trajectory and IoT device scheduling. Finally, the numerical results demonstrate that, compared with traditional UAV communication systems, the NOMA-aided UAV system performs better in terms of data collection and lower total energy consumption of IoT devices can be achieved by DCOA.

Wireless communication is an essential technology to unlock the full potential of unmanned aerial vehicles (UAVs) in numerous applications and has thus received unprecedented attention recently. Although technologies such as direct link, WiFi, and satellite communications are still useful in some remote scenarios where cellular services are unavailable, it is believed that exploiting the thriving 5G and beyond cellular networks to support UAV communications is the most promising and cost-effective approach, especially when the number of UAVs grows dramatically. On the one hand, to guarantee safe and efficient flight operations of multiple UAVs, it is of paramount importance to provide secure and ultra-reliable communication links between the UAVs and their ground pilots or control stations for conveying command and control signals, especially in beyond-visual-line-of-sight (BVLOS) scenarios. On the other hand, because of advances in communication equipment miniaturization as well as UAV manufacturing, mounting compact and lightweight base stations (BSs) or relays on UAVs becomes increasingly feasible. This has led to two promising research paradigms for UAV communications, namely, UAV-assisted cellular communications and cellular-connected UAVs, where UAVs are integrated into cellular networks as aerial communication platforms and aerial users, respectively. As such, integrating UAVs into cellular networks is believed to be a win-win technology for both UAV-related industries and cellular network operators, which not only creates plenty of new business opportunities but also benefits the communication performance of 3-D wireless networks. In addition, UAV related sensing and computing are also helpful for achieving efficient and reliable communication (e.g., in avoiding coverage holes) as well as smart UAV coordination, positioning, and trajectory design. However, 5G and beyond wireless networks with UAVs significantly differs from traditional communication systems, because of the high altitude and high maneuverability of UAVs, the unique UAV-ground channels, the diversified quality of service (QoS) requirements for downlink command and control (C&C) and uplink mission-related data transmission, the stringent constraints imposed by the size, weight, and power (SWAP) limitations of UAVs, as well as the new design degrees of freedom enabled by joint UAV mobility control and communication resource allocation.

In this letter, a novel application method of reconfigurable intelligent surfaces (RIS) is proposed, which installs a RIS on an unmanned aerial vehicle (UAV) rather than fixed to buildings. When the location information of the eavesdropper is unknown, the UAV’s rapid deployment and RIS’s ability to change the transmission channel are utilized to dynamically optimize the UAV’s flight trajectory and RIS’s phase shift. The trajectory of the UAV and phase shift of the RIS are optimized to avoid the risk of potential eavesdropping and improve the average downlink secrecy rate of the system. This letter utilizes Q-learning and Deep Q-network (DQN) algorithms to solve the problem. Experiments show that RIS can reduce the flight distance of the UAV on the premise of ensuring security. The scenarios where the two algorithms are applicable are analyzed, and the DQN algorithm is more suitable for the scenarios of large state and action spaces. Also, the experimental results imply that the RIS-assisted UAV improves the average downlink secrecy rate and system security.

A novel framework is proposed for integrating reconfigurable intelligent surfaces (RIS) in unmanned aerial vehicle (UAV) enabled wireless networks, where an RIS is deployed for enhancing the service quality of the UAV. Non-orthogonal multiple access (NOMA) technique is invoked to further improve the spectrum efficiency of the network, while mobile users (MUs) are considered as roaming continuously. The energy consumption minimizing problem is formulated by jointly designing the movement of the UAV, phase shifts of the RIS, power allocation policy from the UAV to MUs, as well as determining the dynamic decoding order. A decaying deep Q-network (D-DQN) based algorithm is proposed for tackling this pertinent problem. In the proposed D-DQN based algorithm, the central controller is selected as an agent for periodically observing the state of UAV-enabled wireless network and for carrying out actions to adapt to the dynamic environment. In contrast to the conventional DQN algorithm, the decaying learning rate is leveraged in the proposed D-DQN based algorithm for attaining a tradeoff between accelerating training speed and converging to the local optimal. Numerical results demonstrate that: 1) In contrast to the conventional Q-learning algorithm, which cannot converge when being adopted for solving the formulated problem, the proposed D-DQN based algorithm is capable of converging with minor constraints; 2) The energy dissipation of the UAV can be significantly reduced by integrating RISs in UAV-enabled wireless networks; 3) By designing the dynamic decoding order and power allocation policy, the RIS-NOMA case consumes 11.7% less energy than the RIS-OMA case.

Unlike terrestrial communications, unmanned aerial vehicle (UAV) communications have some advantages such as line-of-sight (LoS) environment and flexible mobility. However, the interference will be still inevitable. In this paper, we analyze the effect of the interference on the UAV communications by considering the LoS probability and different channel fadings for LoS and non-line-of-sight (NLoS) links, which are affected by the elevation angle of the communication link. We then derive a closed-form outage probability in the presence of an interfering node for all the possible scenarios and environments of main and interference links. After discussing the impacts of transmitting and interfering node parameters on the outage probability, we show the existence of the optimal height of the UAV that minimizes the outage probability. We also show the NLoS environment can be better than the LoS environment if the average received power of the interference is more dominant than that of the transmitting signal in UAV communications.

This paper introduces double cascaded reconfigurable intelligent surfaces (RISs) to non-orthogonal multiple access (NOMA) networks over cascaded Rician fading and Nakagami-<inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$m$</tex-math></inline-formula> fading channels, where two kinds of passive RIS (PRIS) and active RIS (ARIS) are taken into consideration, called PRIS-ARIS-NOMA networks. Additionally, new closed-form and asymptotic expressions for outage probability and ergodic data rate of two non-orthogonal users are derived with the imperfect/perfect successive interference cancellation schemes. The scenario is modelled around two non-orthogonal users and focuses on analyzing their communication characteristics. Based on the approximate results, the diversity orders and ergodic data rate slopes of two users are obtained in the high signal-to-noise ratios. In addition, the system throughput of PRIS-ARIS-NOMA in delay-limited mode and delay-tolerant mode are discussed according to the outage probability and ergodic data rate. The simulation results verify the correctness of the formulas and yields the following insights: 1) The outage behaviors of PRIS-ARIS-NOMA outperforms than that of PRIS-ARIS assisted orthogonal multiple access (OMA); 2)Use of PRIS-ARIS-NOMA is better than use of PRIS-ARIS-OMA in small transmit power threshold scenarios 3) By increasing the number of reflecting elements of RISs, the PRIS-ARIS-NOMA is able to achieve the enhanced outage performance; and 4) The PRIS-ARIS-NOMA has the higher ergodic data rate and system throughput than double PRISs-NOMA.

In this paper, an active reconfigurable intelligent surfaces (RIS)-assisted Unmanned aerial vehicle (UAV) communication system is constructed, and a joint optimization method for UAV trajectory and system energy efficiency is proposed. In this optimization problem, firstly, the optimization problem of the phase shift matrix of the active RIS is solved by using the successive convex approximation algorithm. The transmit power optimization problem is solved by using the improved gradient descent method; Secondly, the communication energy efficiency is taken as the cost function, and the UAV trajectory is optimized by using the improved particle swarm optimization algorithm. Simulation results show that our algorithm is feasible for improving communication energy efficiency and UAV path planning.

Integrating reconfigurable intelligent surface (RIS) and non-orthogonal multiple access (NOMA) provides a promising solution to support large-scale secure communications. However, reducing the impact of transceiver hardware impairments (HWI) on the performance of RIS-aided NOMA secure networks remains a challenge. In this paper, we propose a robust transmission scheme for RIS-aided NOMA secure networks with transceiver HWI under two proposed eavesdropping scenarios and two artificial noise methods. A closed-form expression for the distortion noise power caused by transceiver HWI in NOMA networks is derived to quantify transceiver HWI. The sum secrecy rate of NOMA users with imperfect successive interference cancellation (SIC) is maximized under distortion noise for more robust security. Further, to tackle the resulting non-convex problem, we decompose it into two sub-problems. Both of them are converted into convex problems using the multi-dimensional quadratic transform (MDQT) method, semi-definite relaxation (SDR) technique, and the successive convex approximation (SCA) algorithm, and then employing the alternate optimization (AO) algorithm solve them. Numerical results demonstrate that the proposed scheme has superior security performance over orthogonal multiple access (OMA) networks, time division multiple access (TDMA) networks, and traditional NOMA networks, achieving more robust performance than the conventional scheme that ignores HWI and imperfect SIC.