Performance comparative study between vector and ECOLOCATION algorithms for indoor positioning

The Indoor positioning based on the ZigBee received signal strength index has attracted more and more researchers’ attention and, due to its low cost, low hardware power consumption and easy implementation. However, because of multipath effects and shadow effects, traditional indoor positioning algorithms cannot obtain good positioning effects. In order to improve the accuracy of ZigBee indoor positioning, this paper proposes an indoor positioning algorithm of annealing algorithm (SA) and genetic algorithm (GA) optimized neural network (SAGA-BP), and the superiority of this algorithm is proved through simulation and experiment. First, establish the position relationship between the received signal strength indicator(RSSI) and the target position, and arrange the node network structure model to collect signals to establish a fingerprint database. Then use the mechanism of the annealing algorithm combined with the genetic algorithm to optimize the initial weight and initial threshold of the neural network algorithm, so that it can quickly jump out of the local optimal solution and achieve high-precision positioning. Experiments have proved the effectiveness of the positioning algorithm. Compared with BP and GA-BP algorithms, SAGA-BP positioning algorithm has an average error of 0.75m for RSSI signals after acquisition and processing, and an average error of BP positioning algorithm is 1.24m. The average error of GA-BP algorithm is 0.98m. Thus, the SAGA-BP algorithm has higher positioning accuracy.

People generally find themselves lost while visiting a new indoor location because they are unaware of the building’s architecture, especially when it is a large one or a shopping mall. The Global Position System (GPS) does not work properly in the indoor environment because of the satellite signal attenuation. In this paper, to assist people in finding their path, a Li-Fi (Light-Fidelity) based Indoor Positioning System (IPS) is proposed. A framework is developed based on a Li-Fi LED lamp transmitter and a dongle receiver connected to an Android smartphone to decode the received sequence. The pathfinding graph-based algorithm is proceeded in a REST architecture by a Web service consulting the graph-path database both installed on a Raspberry pi 4. The proposed solution is a low cost and does not require any additional infrastructure. It is easy to implement in most indoor environments like hospitals, buildings, and campuses. A short survey of techniques and algorithms for indoor positioning and navigation with the help of smartphones is also presented.

With growing technology, Location Based Services (LBSs) are becoming a vital part of life. The rapid development of mobile internet has offered an opportunity for Wi-Fi indoor positioning to come under the spotlight due to its low cost. Here, indoor positioning is performed using Wi-Fi. The earlier solutions like GPS does not provide efficient positioning in indoor environment due to weak signal reception which makes Wi-Fi more reliable. However, nowadays the accuracy of the traditional indoor positioning algorithms like trilateration cannot meet the practical requirement. This paper proposes the performance analysis of indoor positioning algorithms using Wi-Fi technology based on Received Signal Strength (RSS) from the access points in the network. The positioning algorithms are based on location fingerprinting consisting of two stages: The offline database creation and the online positioning. The RSS values obtained by the mobile device at reference points are sent to the server where all the location fingerprints of all reference points are stored in a database. Coordinates of user position are calculated using positioning algorithms and the position is displayed in terms of 2Dcoordinates of the room and indoor map. Basic Fingerprint algorithm, RSS Fingerprint with minimum Euclidean Distance algorithm and RSS Fingerprint with Euclidean Distance and k-nearest neighbors' algorithm were implemented. Moreover comparison of their performance was carried out in terms of accuracy of position. From the result, it is found that an average accuracy of 0.4962 meters was achieved by RSS Fingerprint with minimum Euclidean distance algorithm.

This paper presents of study of ultra-wide band (UWB) indoor positioning considering different type of obstacles that can affect the localization accuracy. In the actual warehouse, a variety of obstacles including metal, board, worker and other obstacles will have NLOS (non-line-of-sight) impact on the positioning of the logistics package, which influence the measurement of the distance between the logistics package and the anchor, thereby affecting positioning accuracy. A new developed method attempts to improve the accuracy of UWB indoor positioning, through and improved positioning algorithm and filtering algorithm. In this project, simulate the warehouse environment in the laboratory, several simulation proves that the used Kalman filter algorithm and Markov algorithm can effectively reduce the error of NLOS. Experimental validation is carried out considering a mobile tag mounted on a robot platform.

Indoor localization is often challenging due to the non-availability of GPS signals. Recently, various radio frequency fingerprinting techniques have been proposed to identify indoor locations using simply received signal strength (RSS) measurements. In general however, RSS measurements are time-varying and are difficult to model for complex environments. This paper proposes the use of dictionary learning (DL) to generate high quality fingerprints that depend also on the channel characteristics for each location. An enhanced DL algorithm is proposed that utilizes prior information about the channel distribution, and can generate the fingerprints in an online fashion. Simulation results demonstrate the efficacy of the proposed approach.

With the WiFi becoming more and more popular over the last few years, the study on the technology of indoor positioning based on WiFi is given more and more attention. Being specific to the problem that not all the clustered reference points(RPs) of the traditional clustering algorithm have geometric proximity in indoor positioning, this paper puts forward the affinity propagation presentation(AP) which bases on the combination of geometry and received signal strength (RSS). Being different from the traditional clustering algorithm, this kind of algorithm can endow the RPs with geometrical and endow the RSS with corresponding weight according to the positioning conditions, it can use the features of the geometry and RSS to restrain the sort of RPs, and that can make the sort of RPs more reasonable. After that it will use k-Nearest Neighbor Algorithm(KNN) to have accurate positioning, which not only can reduce the calculation, but also improve the localization accuracy. Simulation shows that, this kind of algorithm possesses the advantage of fast location and higher localization accuracy.

An RSS transform–based weighted k-nearest neighbor (WKNN) indoor positioning algorithm, Q-WKNN, is proposed to improve the positioning accuracy and real-time performance of Wi-Fi fingerprint–based indoor positioning. To smooth the RSS fluctuation difference caused by acquisition equipment, time, and environment changes, base Q is introduced in Q-WKNN to transform RSS to Q-based RSS, based on the relationship between the received signal strength (RSS) and physical distance. Analysis of the effective range of base Q indicates that Q-WKNN is more suitable for regions with noticeable environmental changes and fixed access points (APs). To reduce the positioning time, APs are selected to form a Q-WKNN similarity matrix. Adaptive K is applied to estimate the test point (TP) position. Commonly used indoor positioning algorithms are compared to Q-WKNN on Zenodo and underground parking databases. Results show that Q-WKNN has better positioning accuracy and real-time performance than WKNN, modified-WKNN (M-WKNN), Gaussian kernel (GK), and least squares-support vector machine (LS-SVM) algorithms.

Wi-Fi-based indoor positioning systems are becoming increasingly prevalent in digital transitions; therefore, ensuring accurate and robust positioning is essential to supporting the growth in demand for smartphones’ location-based services. The indoor positioning system on a smartphone, which is generally based on Wi-Fi received signal strength (RSS) measurements or the fingerprinting comparison technique, uses the K-NN algorithm to estimate the position due to its high accuracy. The fingerprinting algorithm is popular due to its ease of implementation and its ability to produce the desired accuracy. However, in a practical environment, the Wi-Fi signal strength-based positioning system is highly influenced by external factors such as changes in the environment, human interventions, obstacles in the signal path, signal inconsistency, signal loss due to the barriers, the non-line of sight (NLOS) during signal propagation, and the high level of fluctuations in the RSS, which affects location accuracy. In this paper, we propose a method that combines pedestrian dead reckoning (PDR) and Wi-Fi fingerprinting to select a k-node to participate in the K-NN algorithm for fingerprinting-based IPSs. The selected K-node is used for the K-NN algorithm to improve the robustness and overall accuracy. The proposed hybrid method can overcome practical environmental issues and reduces the KNN algorithm’s complexity by selecting the nearest neighbors’ search space for comparison using the PDR position estimate as the reference position. Our approach provides a sustainable solution for indoor positioning systems, reducing energy consumption and improving the overall environmental impact. The proposed method has potential applications in various domains, such as smart buildings, healthcare, and retail. The proposed method outperforms the traditional KNN algorithm in our experimental condition since its average position error is less than 1.2 m, and provides better accuracy.

The increasing demand of indoor Location Based Services (LBS) has made Indoor Positioning System (IPS) a hot research topic. Recently, various machine learning techniques have been developed to tackle the problems of IPS. The WLAN fingerprinting technique is one of the most cost effective choices for IPS due to the use of existing Wi-Fi networks in commercial and public buildings. However, the variation of Received Signal Strength (RSS) at any specific location due to the indoor fading issue leads to serious challenges in the accuracy of the distance estimates. In this paper, we propose a new technique by using Probabilistic Neural Network (PNN) multi-classifier based on Multiple Service Set Identifiers (MSSIDs) that are configured on the same access point. A spatial voting scenario for three PNN-classifiers is proposed as a tool to determine the location of the user. Using a spatial voting based technique is specifically designed to tackle the negative impact of the multi-path propagation on the performance of IPS. The proposed system is performed inside the College of Engineering and Applied Sciences (CEAS) at Western Michigan University. The performance of the proposed system compared with some of the common methods such as K-Nearest Neighbors (K-NN) and multi-class support vector machine (SVM). According to the experimental results, the spatial voting of the three PNN-dassifiers can significantly mitigate the adverse effects of RSS variation. The performance of the multi-classifier exhibits superior performance to that of the other single classifiers in all Area of Interest (AOI). Over 3000 m2 AOI, the proposed system achieves localization accuracy < 0.73m and with precision 90 % of the distance error less than 2m.

Received signal strength (RSS) fingerprint-based indoor localization has received increasing popularity over the past decades. However, it suffers from the high calibration effort for fingerprint collection. In this paper, a Centralized indooR localizatioN method using Pseudo-label (CRNP) is proposed, which employs a small set of labeled data (RSS fingerprint) along with large volumes of unlabeled data (RSS values without coordinates) to reduce the workload of labeled data collection and improve the indoor localization performance. However, the rich location data is large in quantity and privacy sensitive, which may lead to high network cost (i.e., data transmission cost, data storage cost) and potential privacy leakage for data transmission to the central server. Therefore, a decentralized indoor localization method incorporating CRNP and federated learning is devised, which keeps the location data on local users' devices and improves the shared CRNP model by aggregating users' updates of the model. The experiment results demonstrate that (i) the proposed CRNP enables to improve the indoor localization accuracy by using unlabeled crowdsourced data; (ii) the designed decentralized scheme is robust to different data distribution and is capable to reduce the network cost and prevent users' privacy leakage.

With the proliferation of the Internet of Things (IoT), employing Received Signal Strength (RSS) as a metric to determine the location of a target (e.g., person or mobile device) is of great interest in terms of cost and ease of implementation. Indeed, RSS measurements can be easily obtained for most off-the-shelf devices, such as WiFi- or ZigBee compatible devices or sensors. This paper deals with the indoor localization problem in wireless sensor networks (WSNs) and proposes a new approach for radio signal propagation modelling and localization estimation, that accounts for the imperfection of RSS measurements and the reliability of RSS sources by using the Dempster-Shafer Theory (DST). In the signal propagation modelling, key information regarding the geometry of indoor environment that is divided into zones separated by walls (zoning), are considered. Based on the number of walls, the RSS irregularities are estimated using different distance intervals, which are weighted by a probability density determined experimentally. To estimate the location of a target node, the PCR6 rule is used to combine the belief masses of the positions obtained from the probability density. In order to evaluate the performance of the proposed approach, an experimental WSN has been deployed in a living apartment. The obtained results demonstrate that the proposed approach improves the localization accuracy compared to the case without zoning. Moreover, the obtained localization mean error proves the feasibility of a precise localization of humans in indoor environments in the case of Ambient Assisted Living and Social Robotics applications.

In daily life, mobile and wearable devices with high computing power, together with anchors deployed in indoor en-vironments, form a common solution for the increasing demands for indoor location-based services. Within the technologies and methods currently in use for indoor localization, the approaches that rely on Bluetooth Low Energy (BLE) anchors, Received Signal Strength (RSS), and lateration are among the most popular, mainly because of their cheap and easy deployment and accessible infrastructure by a variety of devices. Never-theless, such BLE- and RSS-based indoor positioning systems are prone to inaccuracies, mostly due to signal fluctuations, poor quantity of anchors deployed in the environment, and/or inappropriate anchor distributions, as well as mobile device hardware variability. In this paper, we address these issues by using a collaborative indoor positioning approach, which exploits neighboring devices as additional anchors in an extended positioning network. The collaborating devices' information (i.e., estimated positions and BLE- RSS) is processed using a multilayer perceptron (MLP) neural network by taking into account the device specificity in order to estimate the relative distances. After this, the lateration is applied to collaboratively estimate the device position. Finally, the stand-alone and collaborative position estimates are combined, providing the final position estimate for each device. The experimental results demonstrate that the proposed collaborative approach outperforms the stand-alone lateration method in terms of positioning accuracy.

Due to the wide deployment of wireless local area networks (WLANs) and the easy acquirement of received signal strength (RSS), indoor localization based on RSS has attracted considerable attention in both academia and industry. In this paper, we extract the scatter factor from RSS and then propose a novel indoor localization scheme based on location fingerprinting and curve fitting techniques. The scheme is set up in two phases. In the offline phase, we create a fingerprint and apply the curve fitting technique to construct fitted RSS-distance functions in LOS (Line Of Sight) and NLOS (None Line Of Sight) condition, respectively. In online positioning phase, the proposed optimized fingerprinting-based localization algorithm (OFPL) uses trilateration technique to assist the fingerprinting localization in choosing the proper location of the receiver. Through conducting field and extensive experiments, we can draw the conclusion that our proposed algorithm can obtain some improvement in localization accuracy compared with the classical fingerprinting-based localization.

Recently, machine learning (ML) has been widely adopted for fingerprint-based indoor localization because of its potency in delineating relationships between received signal strength (RSS) information and labels accurately. Existing ML-based indoor localization systems are less robust because they only adopt the output with the highest probability. This affects the final location estimate, hence compromising accuracy due to the severity of RSS fluctuations. Since different ML algorithms (MLAs) yield different performances, it is therefore intuitive to fuse predictions from multiple MLAs to improve the positioning performance in the presence of signal fluctuation. In this article, we propose SmartLoc, a smart wireless indoor localization framework to enhance indoor localization. In the offline phase, multiple MLAs are trained by utilizing an offline database. We further apply probability alignment to guarantee the predicted probabilities of each MLA at the same confidence level. In the online phase, given a testing RSS sample of a user at an unknown location, we extract the labels with probabilities greater than a certain threshold from each MLA to construct the space of candidate labels (SCL). The size of SCL can be adaptively determined by using our proposed dynamic size determination algorithm. Based on the SCL, we propose a probabilistic model to intelligently estimate the user's location by evaluating the label credibility simultaneously. A high label credibility indicates that the frequently occurred label is more likely to be true. Experimental results in a real changing environment verify the superiority of SmartLoc, outperforming the best among comparative methods by 10.8% in 75th percentile accuracy.

LoRa technology has received a lot of attention in the last few years. Numerous success stories about using LoRa technology for the Internet of Things in various implementations. Several studies have found that the use of LoRa technology has the opportunity to be implemented in indoor-based applications. LoRa technology is found more stable and is more resilient to environmental changes. Environmental change of the indoor is a major problem to maintain accuracy in position prediction, especially in the use of Received Signal Strength (RSS) fingerprints as a reference database. The variety of approaches to solving accuracy problems continues to improve as the need for indoor localization applications increases. Deep learning approaches as a solution for the use of fingerprints in indoor localization have been carried out in several studies with various novelties offered. Let’s introduce a combination of the use of LoRa technology's excellence with a deep learning method that uses all variations of measurement results of RSS values at each position as a natural feature of the indoor condition as a fingerprint. All of these features are used for training in-deep learning methods. It is DeepFi-LoRaIn which illustrates a new technique for using the fingerprint data of the LoRa device's RSS device on indoor localization using deep learning methods. This method is used to find out how accurate the model produced by the training process is to predict the position in a dynamic environment. The scenario used to evaluate the model is by giving interference to the RSS value received at each anchor node. The model produced through training was found to have good accuracy in predicting the position even in conditions of interference with several anchor nodes. Based on the test results, DeepFi-LoRaIn Technique can be a solution to cope with changing environmental conditions in indoor localization