Performance Evaluation of Real-Time Precise Point Positioning with Both BDS-3 and BDS-2 Observations.

Performance assessment of real-time multi-GNSS integrated PPP with uncombined and ionospheric-free combined observables

Precise Point Positioning (PPP) is a popular technology for precise applications based on the Global Navigation Satellite System (GNSS). Multi-GNSS combined PPP has become a hot topic in recent years with the development of multiple GNSSs. Meanwhile, with the operation of the real-time service (RTS) of the International GNSS Service (IGS) agency that provides satellite orbit and clock corrections to broadcast ephemeris, it is possible to obtain the real-time precise products of satellite orbits and clocks and to conduct real-time PPP. In this contribution, the real-time multi-GNSS orbit and clock corrections of the CLK93 product are applied for real-time multi-GNSS PPP processing, and its orbit and clock qualities are investigated, first with a seven-day experiment by comparing them with the final multi-GNSS precise product ‘GBM’ from GFZ. Then, an experiment involving real-time PPP processing for three stations in the Multi-GNSS Experiment (MGEX) network with a testing period of two weeks is conducted in order to evaluate the convergence performance of real-time PPP in a simulated kinematic mode. The experimental result shows that real-time PPP can achieve a convergence performance of less than 15 min for an accuracy level of 20 cm. Finally, the real-time data streams from 12 globally distributed IGS/MGEX stations for one month are used to assess and validate the positioning accuracy of real-time multi-GNSS PPP. The results show that the simulated kinematic positioning accuracy achieved by real-time PPP on different stations is about 3.0 to 4.0 cm for the horizontal direction and 5.0 to 7.0 cm for the three-dimensional (3D) direction.

Real-time capability , positioning accuracy and convergence time ar e the keys to the performance of Precise Point Positioning (PPP). In recent years, the development of IGS Real-Time Services (RTS) has improved the performance of real-time PPP to a large extent. Meanwhile, the PPP ambiguity resolution technique, which significantly improves the positioning accuracy and convergence time, has become mature gradually. If the advantages of both techniques can be combined to realize real-time PPP with ambiguity resolution, the application of PPP would be greatly expanded. In this paper, a real-time satellite-satellite single-difference fractional cycle bias (FCB) estimation method based on RTS products is proposed. To meet the demand of real-time PPP, narrow-lane FCBs are forecasted by short-term linear extrapolation. Taking accuracy levels and data amount into consideration, the forecasting interval for real-time wide-lane and narrow-lane FCBs are determined. Finally, the performance of real-time PPP with ambiguity resolution using real-time FCBs is evaluated in both static and kinematic modes. The results show that wide-lane FCBs to be forecasted daily and narrow-lane FCBs to be forecasted every 5 min can satisfy the need of real-time PPP with ambiguity resolution. In static mode, the average time to first fix (TTFF) is 15.97 min, and the average precision of the north, east and up components for hourly solution are 1.51, 1.64 and 2.18 cm respectively. As for kinematic mode, an average TTFF of 24.36 min is needed, and the 3D position error in fixed solution is decreased by 42.59% compared with float solution.

Real-Time (RT) Precise Point Positioning (PPP) uses precise satellite orbits and clock corrections, and employs a separate receiver for positioning. With the growing demand, RT PPP is becoming an increasingly popular research topic. The ambiguity resolution (AR) can significantly improve the positioning accuracy and convergence time of PPP, so it is essential to study PPPAR in RT mode. In this paper, 37 MGEX stations from around the world are chosen, and the RT orbit, clock, and phase biases products broadcast by the Centre National d’Etudes Spatiales (CNES) are applied to PPPAR. Additionally, the residuals of the RT phase biases products, convergence time, and positioning accuracy are investigated. The results indicate that GPS products have the best quality of AR, with wide-lane (WL) and narrow-lane (NL) residuals of 98.9% and 95.3%, respectively, within ±0.25 cycles. Within ±0.25 cycles, the WL and NL residuals of the Galileo are 98.2% and 94.3%, respectively. Within ±0.25 cycles, the (Beidou Navigation Satellite System) BDS has a poor quality of AR, with WL and NL residuals of 97.3% and 73.1%, respectively. Due to the poor quality of the BDS AR, the convergence time of the BDS is not calculated in this paper. The convergence time of other systems is significantly reduced after AR processing, and the convergence time of the GPS/Galileo combination is the fastest, being 17.14 min in kinematic mode and only 11.85 min in static mode. The positioning accuracy of the GPS, Galileo, GPS/Galileo, and GPS/Galileo/BDS in the E and U directions is significantly improved after PPPAR.

Evaluation of BDS-2 real-time orbit and clock corrections from four IGS analysis centers

BeiDou navigation satellite system(BDS)has opened service in most of the Asia-Pacific region,it offers the possibility to break the technological monopoly of GPS in the field of high-precision applications,so its performance of precise point positioning(PPP)has been a great concern.Firstly,the constellation of BeiDou regional navigation system and BDS/GPS tracking network is introduced.Secondly,the precise ephemeris and clock offset accuracy of BeiDou satellite based on domestic tracking network is analyzed.Finally,the static and kinematic PPP accuracy is studied,and compared with the GPS.The actual measured numerical example shows that the static and kinematic PPP based on BDS can achieve centimeter-level and decimeter-level respectively,reaching the current level of GPS precise point positioning.

Real-time precise point positioning (PPP) has been evolved as a powerful technique to achieve globally homogenous decimeter or even centimeter positioning accuracy, which is widely used for maritime precise positioning applications. Currently, the research of the real-time PPP for maritime applications mainly focuses on GPS and GLONASS. In addition, the real-time PPP for kinematic maritime positioning is at least limited by two issues, (i) The real-time availability of the correction products for satellite orbits and clocks; (ii) The error correction related to the marine environment, especially for the estimation of wet zenith troposphere delay (ZWD) is challenged by complex fluctuations of marine atmospheric weather and the severe multipath caused by the sea clutter reflection. In this contribution, using the State-Space Representation correction products based on Radio Commission for Maritime Services (RTCM-SSR), we develop a GPS/BDS real-time kinematic maritime PPP. On the one hand, a piece-wise method is adopted to estimate the ZWD and the horizontal gradient. On the other hand, a robust sequential least squares (RSLSQ) PPP estimator is adopted based on IGG-III model to restrain the unmolded gross error. Based on the 6 h maritime data, the results show that the up direction accuracy and the convergence time of GPS, BDS and GPS/BDS, respectively, are improved based on 0.5 window length for ZWD estimation and the RSLSQ estimator. In addition, the horizontal accuracy of real-time single BDS and GPS using RTCM-SSR can achieve the accuracy of sub-decimeter level when the positioning error is convergence. Compared with the single constellation, the positioning accuracy and the convergence time of the real-time GPS/BDS using RTCM-SSR improves, respectively, by 10 and 18%, and the kinematic positioning accuracy in horizontal is better than 30 cm.

Single-frequency (SF) receivers are much cheaper than that of dual-frequency (DF). Even though DF precise point positioning (PPP) is nowadays applied in the time community, the cost of equipment is one of the key considerations for time users. Furthermore, the hardware delay calibration of single-frequency devices is simpler than that of dual-frequency devices. In addition, there is no literature to study real-time SF PPP time transfer. In this contribution, the possibility of time transfer using SF PPP was studied. The Un-combined SF PPP was employed for time transfer with ionospheric-constraint using real-time precise products. In this case, 18 multi-GNSS experiment (MGEX) stations and one time lab station were used to study real-time SF PPP time transfer using GPS, Galileo and BDS-2/3 satellites with 20-day. The results suggested that real-time single-frequency PPP can meet time transfer. the standard deviation (STD) of the clock difference obtained from GPS-only, Galileo-only and BDS-2/3 single-frequency PPP are about (0.51, 0.54, 0.91) ns, respectively. The frequency stability of real-time single-frequency PPP can achieve (1E-12, 1E-13, 1E-13) level at short-term and (1E-13, 1E-13, 1E-14) level at long-term, respectively, for BDS-2/3, Galileo-only and GPS-only based.

Because of the special design of BeiDou navigation satellite system (BDS) constellation, the effects of ionospheric scintillation on operational BDS generally are more serious than on the global positioning system (GPS). As BDS is currently providing global services, it is increasingly important to seek strategies to mitigate the scintillation effects on BDS navigation and positioning services. In this study, an improved cycle-slip threshold model is proposed to decrease the high false-alarm rate of cycle-slips under scintillation conditions, thus avoiding the frequent unnecessary ambiguity resets in BDS precise point positioning (PPP) solution. We use one-year (from 23 March 2015 to 23 March 2016) BDS dataset from Hong Kong Sha Tin (HKST) station (22.4°N, 114.2°E; geomagnetic latitude: 15.4°N) to model the cycle-slip threshold and try to make it suitable for three types of BDS satellites and multiple scintillation levels. The availability of our mitigation strategy is validated by using three months (from 1 September 2015 to 30 November 2015) BDS dataset collected at 10 global navigation satellite system (GNSS) stations in Hong Kong. Positioning results demonstrate that our mitigated BDS PPP can prevent the sudden fluctuations of positioning errors induced by the ionospheric scintillation. Statistical results of BDS PPP experiments show that the mitigated solution can maintain an accuracy of about 0.08 m and 0.10 m in the horizontal and vertical components, respectively. Compared with standard BDS PPP, the accuracy of mitigated PPP can be improved by approximately 24.1%, 38.2%, and 47.9% in the east, north, and up directions, respectively. Our study demonstrates that considering different scintillation levels to establish appropriate cycle-slip threshold model in PPP processing can efficiently mitigate the ionospheric scintillation effects on BDS PPP.

The BeiDou Navigation Satellite System (BDS) offers orbit and clock corrections through the B2b signal, enabling Precise Point Positioning (PPP) without relying on ground communication networks. This capability supports applications such as aerial and maritime mapping. However, achieving high precision during the convergence period remains challenging, particularly for missions with short observation durations. To address this, we analyze the performance of PPP over short periods using PPP-B2b products and propose using the backward smoothing method to enhance the accuracy during the convergence period. Evaluation of the accuracy of PPP-B2b products shows that the orbit and clock accuracy of the BDS surpass those of GPS. Specifically, the BDS achieves orbit accuracies of 0.059 m, 0.178 m, and 0.186 m in the radial, along-track, and cross-track components, respectively, with a clock accuracy within 0.13 ns. The hourly static PPP achieves 0.5 m and 0.1 m accuracies with convergence times of 4.5 and 25 min at a 50% proportion, respectively. Nonetheless, 7.07% to 23.79% of sessions fail to converge to 0.1 m due to the limited availability of GPS and BDS corrections at certain stations. Simulated kinematic PPP requires an additional 1–4 min to reach the same accuracy as the static PPP. Using the backward smoothing method significantly enhances accuracy, achieving 0.024 m, 0.046 m, and 0.053 m in the north, east, and up directions, respectively. For vehicle-based positioning, forward PPP can achieve a horizontal accuracy better than 0.5 m within 4 min; however, during the convergence period, positioning errors may exceed 1.5 m and 3.0 m in the east and up direction. By applying the smoothing method, horizontal accuracy can reach better than 0.2 m, while the vertical accuracy can improve to better than 0.3 m.

Satellite orbit error and clock bias are the keys to precise point positioning (PPP). The traditional PPP algorithm requires precise satellite products based on worldwide permanent reference stations. Such an algorithm requires considerable work and hardly achieves real-time performance. However, real-time positioning service will be the dominant mode in the future. IGS is providing such an operational service (RTS) and there are also commercial systems like Trimble RTX in operation. On the basis of the regional Continuous Operational Reference System (CORS), a real-time PPP algorithm is proposed to apply the coupling estimation of clock bias and orbit error. The projection of orbit error onto the satellite-receiver range has the same effects on positioning accuracy with clock bias. Therefore, in satellite clock estimation, part of the orbit error can be absorbed by the clock bias and the effects of residual orbit error on positioning accuracy can be weakened by the evenly distributed satellite geometry. In consideration of the simple structure of pseudorange equations and the high precision of carrier-phase equations, the clock bias estimation method coupled with orbit error is also improved. Rovers obtain PPP results by receiving broadcast ephemeris and real-time satellite clock bias coupled with orbit error. By applying the proposed algorithm, the precise orbit products provided by GNSS analysis centers are rendered no longer necessary. On the basis of previous theoretical analysis, a real-time PPP system was developed. Some experiments were then designed to verify this algorithm. Experimental results show that the newly proposed approach performs better than the traditional PPP based on International GNSS Service (IGS) real-time products. The positioning accuracies of the rovers inside and outside the network are improved by 38.8% and 36.1%, respectively. The PPP convergence speeds are improved by up to 61.4% and 65.9%. The new approach can change the traditional PPP mode because of its advantages of independence, high positioning precision, and real-time performance. It could be an alternative solution for regional positioning service before global PPP service comes into operation.

The availability of raw Global Navigation Satellite System (GNSS) measurements from Android smart devices gives new possibilities for precise positioning solutions, e.g., Precise Point Positioning (PPP). However, the accuracy of the PPP with smart devices currently is a few meters due to the poor quality of the raw GNSS measurements in a kinematic scenario and in urban environments, particularly when the smart devices are placed inside vehicles. To promote the application of GNSS PPP for land vehicle navigation with smart devices, this contribution studies the real-time PPP with smartphones. For data quality analysis and positioning performance validation, two vehicle-based kinematic positioning tests were carried out using two Huawei Mate30 smartphones and two Huawei P40 smartphones with different installation modes: the vehicle-roof mode with smartphones mounted on the top roof outside the vehicle, and the dashboard mode with smartphones stabilized on the dashboard inside the vehicle. To realize high accuracy positioning, we proposed a real-time smartphone PPP method with the data processing strategies adapted for smart devices. Positioning results show that the real-time PPP can achieve the horizontal positioning accuracy of about 1–1.5 m in terms of root-mean-square and better than 2.5 m at the 95th percentile for the vehicle-based kinematic positioning with the experimental smartphones mounted on the dashboard inside the vehicle, which is the real scenario in vehicle navigation.

The release of the world’s first dual-frequency GPS/Galileo smartphone, Xiaomi mi 8, in 2018 provides an opportunity for high-precision positioning using ultra low-cost sensors. In this research, the GNSS precise point positioning (PPP) accuracy of the Xiaomi mi 8 smartphone is tested in post-processing and real-time modes. Raw dual-frequency observations are collected over two different time windows from both of the Xiaomi mi 8 smartphone and a Trimble R9 geodetic-quality GNSS receiver using a short baseline, due to the lack of a nearby reference station to the observation site. The data sets are first processed in differential modes using Trimble business center (TBC) software in order to provide the reference positioning solution for both of the geodetic receiver and the smartphone. An in-house PPP software is then used to process the collected data in both of post-processing and real-time modes. Precise ephemeris obtained from the multi-GNSS experiment (MGEX) is used for post-processing PPP, while the new NAVCAST real-time GNSS service, Germany, is used for real-time PPP. Additionally, the real-time PPP solution is assessed in both of static and kinematic modes. It is shown that the dual-frequency GNSS smartphone is capable of achieving decimeter-level positioning accuracy, in both of post-processing and real-time PPP modes, respectively. Meter-level positioning accuracy is achieved in the kinematic mode.

Although there are already several real-time precise positioning service providers, unfortunately, not all users can use the correction information due to either cost of the service and limitation of their equipment or out of the service coverage. An alternative way is to enhance the accuracy of the predicted satellite clocks for precise real-time positioning. Based on the study of existing prediction models, an improved model combing the spectrum analysis (SA) and the generalized regression neural network (GRNN) model is proposed especially for BeiDou satellite navigation system (BDS)-2 satellites. The periodic terms and GRNN-related parameters including length and interval of sample data, as well as a smooth factor, are optimized satellite by satellite to consider satellite-specific characteristics for all the fourteen BDS-2 satellites. The improved model is validated by comparing the predicted clocks of existing models and the improved model with precisely estimated ones. The bias of the predicted clock is within ±0.5 ns over three hours and better than that of the other models and can be used for several real-time precise applications. The clock prediction is further evaluated by applying clock corrections to precise point positioning (PPP) in both static and kinematic mode for eight IGS (International GNSS Service) MGEX (Multi-GNSS Experiment) stations in the Asia-Pacific region. In the static PPP, the improved model is validated to be effective, and position accuracies of some IGS MGEX stations achieve more than 30.0% improvements on average for each component, which enables us to obtain sub-decimeter positioning. In the kinematic PPP, the improved model performs much better than the others in terms of both the convergence time and the position accuracy. The convergence time can be shortened from 1–2 h to 0.5–1 h, while the position accuracy is enhanced by 15.4%, 21.6% and 19.3% on average in east, north and up component, respectively.

The BeiDou Navigation Satellite System (BDS) precise point positioning (PPP) service, PPP-B2b, is broadcasted by BDS-3 geostationary earth orbit (GEO) satellites, which provides high-precision positioning and timing services to users in China and neighboring regions. This paper presents an analysis of real-time PPP time transfer experiments utilizing PPP-B2b corrections from BDS-3 satellites and compares the results with real-time time transfer performance based on the state space representation (SSR) corrections broadcast by the International Global Navigation Satellite System Service Data Center of Wuhan University. PPP-B2b/SSR corrections were applied to the broadcast ephemeris to derive precise satellite positions and clock biases. The BDS-3 B1I + B3I and B1C + B2a combinations were analyzed under short baseline conditions using real-time PPP processing software. The results demonstrated that the standard deviation (STD) of real-time PPP time transfer for the B1C + B2a dual-frequency combination of BDS-3 using PPP-B2b/SSR corrections were consistently below 0.2 ns, while the STD for the B1I + B3I dual-frequency combination remained under 0.3 ns. The 10 000 s Allan Deviations for all combinations were better than 1.322 × 10−14. The findings confirmed that the PPP-B2b of BDS-3 is capable of achieving sub-nanosecond time transfer, comparable to SSR-based methods. PPP-B2b is more accessible and offers a broader range of applications compared to SSR, making it suitable for long-term, reliable real-time time transfer operations in network-restricted environments.