Power-Domain Interference Graph Estimation for Multi-hop BLE Networks

Problem statement: The Wireless Body Area Sensor Networks (WBASNs) is a wireless network used for communication among sensor nodes operating on or inside the human body in order to monitor vital body parameters and movements. This study surveys the state-of-the-art on Wireless Body Area Networks, discussing the major components of research in this area including physiological sensing and preprocessing, WBASNs communication techniques and data fusion for gathering data from sensors. In addition, data analysis and feedback will be presented including feature extraction, detection and classification of human related phenomena. Approach: Comparative studies of the technologies and techniques used in such systems will be provided in this study, using qualitative comparisons and use case analysis to give insight on potential uses for different techniques. Results and Conclusion: Wireless Sensor Networks (WSNs) technologies are considered as one of the key of the research areas in computer science and healthcare application industries. Sensor supply chain and communication technologies used within the system and power consumption therein, depend largely on the use case and the characteristics of the application. Authors conclude that Life-saving applications and thorough studies and tests should be conducted before WBANs can be widely applied to humans, particularly to address the challenges related to robust techniques for detection and classification to increase the accuracy and hence the confidence of applying such techniques without physician intervention.

Monitoring and automatic control of building environment is a crucial application of Wireless Sensor Network (WSN) in which maximizing network lifetime is a key challenge. Previous research into the performance of a network in a building environment has been concerned with radio propagation within a single floor. We investigate the link quality distribution to obtain full coverage of signal strength in a four-storey building environment, experimentally. Our results indicate that the transitional region is of particular concern in wireless sensor network since it accommodates high variance unreliable links. The transitional region in a multi-storey building is mainly due to the presence of reinforced concrete slabs at each storey and the fac┬©ade which obstructs the radio signal and introduces an additional absorption term to the path loss.

ABSTRACTThe clock in embedded systems usually is driven by a crystal oscillator and implemented via a counter register, such a crystal clock is non-identical and drifting due to the manufacturing tolerance and variation of working conditions. Thus, a common time among distributed wireless sensor nodes, also referred to as Time Synchronization, is required for many time-sensitive wireless applications, such as collaborative condition monitoring, coordinated control and localization. Inspired by fireflies’ behaviour, the Pulse-Coupled Oscillators (PCO) has been proposed for synchronization in complex networks. Since the concurrent transmission of PCO’s Pulses is impossible in Wireless Sensor Networks (WSNs), the desynchronization mechanism is adopted to ensure the implementation of PCO in WSNs. Moreover, due to the uncertainties in radio channels and the complexities of communication protocols and packet-exchange behaviours in wireless networks, it is challenging to have a closed-form solution to the performance of PCO synchronization in WSNs. The realistic software simulation, in particular, the discrete event simulator has been a powerful tool to exam the performance of communication protocols in various scenarios, since an order sequence of well-defined event in time is to represent the behaviour of a complex system. This paper presents the development of a pulse-coupled oscillators time synchronization simulator on the OMNeT++ platform for simulating and studying its behaviour and performance in sensor networks. A clock module with configurable phase and frequency noises, and adjustable and higher resolution is developed to mimic various crystal oscillators in embedded systems, for example, the real-time clock. The developed simulator also supports the full functions devices defined by ZigBee protocol, which allows realistic simulation of multi-hop IEEE 802.15.4 wireless networks. Finally, the intensive simulations of classical PCO with the refractory period in IEEE 802.15.4-based WSNs have been carried out to demonstrate the features and benefits of the developed simulator. It is shown that for the non-identical and time-varying PCO clocks in the WSNs, the achieved synchronization will lose gradually, and the time that maintained synchronization depends on the length of refractory period.

Wireless Sensor Networks (WSNs) have emerged as perhaps the most important networking paradigm of recent times, both in terms of their commercial potential and also from a scientific point of view. WSNs are important commercially because of their many applications, spanning from civil to military applications such as structural monitoring of bridges, monitoring of wildlife, tracking of contaminants in the soil and atmosphere. Some of these applications have already proved to be commercially viable and indeed financially very attractive. WSNs are also very important from a scientific point of view, because of their unique features with respect to other types of wireless networks: nodes are typically immobile, and are required to carry a specific type of traffic (which is advantageous), have extreme restrictions on the energy they consume, the processing power they have, and the antennas they can use (which is disadvantageous); in addition, the data created at different sensors may be strongly correlated, which can be beneficial but requires only good algorithms that take advantage of it. Therefore, in the last few years we have experienced an important shift in research activities, moving from general purpose wireless networks to more focused topics specifically on WSNs, taking into account their specific advantages and peculiarities. An important recurring theme in research in this field is the need for energy efficiency, which is the thread of this special issue. The papers which appear in this issue have been carefully selected from the best IEEE PIMRC 2008 conference papers addressing the issue of energy efficiency in WSNs. The respective authors have been asked to provide a significantly extended version of the conference paper, which has subsequently undergone a rigorous review process according to the IJWIN publication standards prior to acceptance. The final set of papers addresses issues at physical, medium access control and networking layers, and to some extent at the application layer. All of these papers take into account the unique peculiarities, advantages, and shortcomings of wireless sensor networks, and propose algorithms and analyses that significantly advance research in the field. We sincerely hope you will enjoy reading them as much as we did. The author of the first paper ‘‘Power Management and Data Rate Maximization in Wireless Energy Harvesting Sensors’’ by Chandra R. Murthy, deals with the problem of power management and throughput maximization for energy neutral operation when using increasingly important but so far rarely analyzed Energy Harvesting Sensors (EHS) to send data over wireless links. The EHS is assumed to be able to harvest energy at a constant rate, and use a fixed part of the energy harvested in a slot for measuring the channel state. The rest of the harvested energy is available for transmission, but it can also be stored in an Wireless Sensor Networks (WSNs) have emerged as perhaps the most important networking paradigm of recent times, both in terms of their commercial potential and also from a scientific point of view. The papers that appear in this issue have been carefully selected from the best IEEE PIMRC 2008 conference papers which addressed the issue of energy efficiency in WSNs. The final set of papers addresses issues at physical, medium access control, networking and to some extend application layers. All of these papers take into account the unique peculiarities, advantages, and shortcomings of wireless sensor networks, and propose algorithms and analyses that significantly advance research in the field. Note that this activity has been partly supported by the NoE-216715 NEWCOM++.

Ultra-wideband (UWB) radio communication sys- tems operate using extremely short duration base-band pulses. This paper compares the performance of three competing multi- ple access modulation schemes that have been proposed for appli- cation to UWB based wireless sensor networks. These multiple access schemes are ultra-wideband Time-Hopping (TH-UWB), Direct Sequence Spread Spectrum (DSSS-UWB) and Orthogonal Frequency Division Multiplexing (OFDM-UWB). Each system was investigated under four operating conditions of different bandwidths and bit rates for three different transmission ranges. The attributes measured to compare the performance of the multiple access schemes under consideration were packet link error rate, throughput and energy efficiency. TH-UWB outper- forms DSSS-UWB and OFDM-UWB for high bandwidth condi- tions. Whereas, DSSS-UWB performs better in low bandwidth conditions compared to the other two systems. Decreasing the transmission range significantly degrades the overall performance of the systems. I. INTRODUCTION Wireless sensor networks are special networks composing of a large number of inexpensive, low-power communication sensing devices (sensor nodes), which are densely deployed throughout a physical space and have the capability of col- laborating with each other to monitor a wide variety of ambient conditions. Realisation of sensor network applications requires wireless ad hoc networking techniques (1), therefore the sensor nodes are deployed in an ad hoc fashion and are required to organize themselves to form a multi-hop wireless communication network. Efficient and reliable communication between multiple sen- sor network entities is a big challenge. The increased collision probability resulting from multiple sensor nodes transmitting data simultaneously over the same transmission medium is a common problem facing communication in wireless networks. This problem can be overcome by using reliable multiple access techniques. An ideal wireless sensor communication network would require a multiple access scheme that allows the accommodation of multiple users and provides effective communication. It must also offer some measure of security and should have low probability of intercept. It should also be resistant to jamming and must be energy efficient. Ultra-wideband (UWB) radio is an emerging technology that operates using extremely short duration base-band pulses and has a number of advantages that makes it an attractive choice for sensor networks. In particular, UWB systems have low power and low complexity. They have a noise like signal and are therefore resistant to severe multipath and jamming. They also provide greater bandwidth and are more cost ef- fective for providing increased throughput without increasing power. The three approaches to multiple access in UWB are:

Wireless Sensor Network is greatly evolved in recent years. Technological advancements in wireless networks are intended to develop various fields especially in medical domain. Nowadays, remote health monitoring is possible by the enormous growth of wireless body area sensor networks. The Wireless Body Area Sensor Network monitors the human health by using wearable body sensors, and sends the status of the human health to the medical experts. Body nodes will be placed on, in and around the human body. The major key issue in Wireless Body Area Sensor Network is power management. Since batteries used in sensors are very tiny, it tends to have a minimal lifetime. In order to increase the lifetime of the sensor node, the energy needs to be utilized in an efficient manner. In this paper we have proposed conditional re-transmission technique to minimize the energy consumption. So the sensor nodes lifetime will get increased and in turn Wireless Body Area Sensor Networks lifetime will also be increased. By increasing the lifetime of the sensor nodes, the batteries or sensor nodes need not to be replaced frequently.

The year 2005 witnesses the third occasion that the Wireless Personal Area and Ad-hoc Networks minitrack is part of the annual HICSS conference. This year there was a substantial increase in submissions (thus a substantial decrease in the acceptance rate), indicating the growing importance of research in this area. The minitrack is also focused on fundamental challenges and issues arising in wireless sensor networks and their applications. Wireless sensor networks differ from other wireless networks in the need for unattended and very low-energy operation, in the possibility of collaboration and distributed sensor calibration, and in the mission oriented nature of most sensor networks. Thus our mini track looks at two very important streams of research. After a strict review process nine papers were selected to be included in the program of the minitrack. The first paper is titled “BT-Crowds: Crowds-style Anonymity with Bluetooth and Java,” presenting an interesting idea on how anonymity can be achieved when sending messages in WPAN environments. Our second paper revisits scatternet formation issues of Bluetooth based ad hoc networks thus the title: “A Dynamic and Distributed Scatternet Formation Protocol for Real-life Bluetooth Scatternets.” The third paper is titled “Secure Dynamic Source Routing” and presents a new variant of the DSR routing protocol with special emphasis on security. In the fourth paper, the discussion concerns “Routing Based Feedback towards Applications in Mobile Ad Hoc Networks,” where routing notifications are relayed via event channels. “A Location Service Mechanism for Position-Based Multicasting in Wireless Mobile Ad hoc Networks” is the title of the fifth paper in the minitrack. It presents some innovative ideas on how location information can be managed for multicast communications in ad-hoc networks. In the sixth paper, “Sliding Window Protocol for Secure Group Communication in Ad Hoc Networks,” the authors propose a sliding window protocol for determining multiple routes in a multi-communications environment. In the seventh paper titled “Ad Hoc Routing Protocol Avoiding Route Breaks Based on AODV,” the authors propose improvements to the well-known AODV ad hoc routing protocol The eight paper, “Joint Scheduling and Routing Algorithm for Ad Hoc Wireless,” presents an innovative and interesting idea wrapped around an iterative algorithm on power control. In the final paper of the minitrack, “Performance Issues of Ad Hoc Routing Protocols in a Network Scenario used for VideoPhone Applications,” the authors present a simulation based performance analysis of different ad hoc routing protocols using the application pointed to in the title. These papers highlight some of the issues and work towards solutions in Personal Area and ad hoc networks which are among the most active research fields in wireless networking. We believe that the papers will provide opportunities for researchers to come together and discuss and debate the results of the interesting experiments that are described in the papers. We are confident that the minitrack will achieve its goal of bringing together leading researchers, to present new results and discuss synergies between the two areas. We also take this opportunity to thank all the reviewers for their valuable and professional work as well as all the authors who submitted papers and thus helped us to create such a strong minitrack. We would also like to express our sincere gratitude to the conference organizers for their hard work and help.

Any kinds of tiny vibration of machine tool parts will have a great influence on surface quality of the workpiece at ultra-precise machining process of aspheric surface. At present the major way for decreasing influence of vibration is machining compensation technology. Therefore it is important for machining compensation control to acquire and transmit these vibration signals effectively. This paper presents a vibration monitoring system of aspheric surface machining machine tool based on wireless sensor networks (WSN). Some key issues of wireless sensor networks for vibration monitoring system of aspheric surface machining are discussed. The reliability of data transmission, network communication protocol and synchronization mechanism of wireless sensor networks are studied for the vibration monitoring system. The proposed system achieves multi-sensors vibration monitoring involving the grinding wheel, the workpiece and the workbench spindle. The wireless transmission of vibration signals is achieved by the combination with vibration sensor nodes and wireless network. In this paper, these vibration sensor nodes are developed. An experimental platform is structured which employs wireless sensor networks to the vibration monitoring system in order to test acquisition and wireless transmission of vibration signal. The test results show that the proposed system can achieve vibration data transmission effectively and reliability and meet the monitoring requirements of aspheric surface machining machine tool.

Error control coding improves reliability and efficiency of wireless communication systems. This research delves into the latest advancements in error control coding schemes for wireless communication systems, with a specific focus on their application within the domain of Low Power Wide Area Networks (LPWANs) such as Narrowband Internet of Things (NB-IoT) systems, LoRa energy-efficient hardware design, random access control systems, and wireless sensor networks. In the context of LPWANs, particularly NB-IoT systems, we investigate the adaptive coding and modulation (ACM) in NB-IoT systems, which adapts coding rates and modulation techniques to changing channel circumstances. Comprehensive analysis of the literature review shows that the proposed approaches are more energy efficient and less error-prone than fixed coding and modulation schemes. Using Cell Design Methodology (CDM), Single Error Correction (SEC) codes are optimized for energy efficiency. Power and energy efficiency have improved in standard CMOS and CDM logic systems. This impacts IoT devices, memory storage, and security systems. Next, Forward Error Correction (FEC) is examined for ALOHA-based random-access control systems wherein packet loss rate and spectral efficiency metrics are mathematically calculated. FEC is beneficial, especially when time and frequency synchronization diverge. Monte Carlo simulations studied in the literature shows that FEC improves satellite communication systems. This review establishes benefits of FEC, notably in satellite communications systems. In addition, Wireless Sensor Networks (WSNs) error control techniques and network reliability and performance are examined along with Convolutional, Turbo, Low density parity check codes(LDPC), and Polar error correction coding (ECC) methods. We learn about their benefits, drawbacks, and implementation challenges by assessing their efficacy, efficiency, and applicability in wireless sensor networks (WSN) applications. This study further highlights advancements of energy-efficient error control coding when, integrated into network designs alongwith the trade-offs between efficacy and intricacy to help improve wireless communication networks. Finally, this study summarizes current error control coding approaches for wireless communication systems. We provide insights into improving reliability, energy conservation, and efficacy by examining ACM, CDM, FEC, and error correction coding (ECC) across varied domains including LPWAN and IoT technologies with earnest hope to facilitate researchers, engineers, and professionals working in the field of error control coding in wireless communication.

SummaryWith the rapid development of artificial intelligence, the intelligent distribution network can effectively improve the overall power supply quality of the distribution system. The designed distributed power has been able to achieve an optimal operation of grid connection, while the high‐speed operation of distribution equipment can achieve effective interaction with users. At present, intelligent distribution network is widely studied and applied in power industry because of its advantages of high efficiency energy and environmental protection. Because of its unique characteristics, such as low cost and fast speed, wireless sensor network is cleverly applied in intelligent distribution network. However, wireless sensor network has some defects in energy utilization due to its large range and too many nodes. This paper presents a cross‐layer cooperative control model, which can control the real time and reliability of network power data communication through stack protocol layer. This method can learn the weight value adaptively by training the influence relationship between the parameters of each protocol layer and achieve real‐time and reliable data communication by adjusting the policy and parameters of each layer in real time. This method takes the parameters of each wireless sensor node as the unit to establish the influence relationship between each other so as to realize the connection between each node of wireless sensor network and then to control the wireless sensor network as a whole to ensure the real‐time reliability of data communication in intelligent distribution network. In this paper, a lot of simulation experiments have been done, and the results show that the proposed cross‐layer cooperative control model can control the whole wireless sensor network to achieve efficient data transmission capacity of intelligent distribution wireless sensor network.

Wireless network of wearable biomedical sensors by human body shows great potential to enhance the biometrics performance significantly. Meanwhile, it poses prominent characteristics and challenges to physicians and engineers for its particular medical application as compared to other application of wireless sensor networks (WSN). Mobility pattern plays an important role in designing the wireless body sensor networks (WBSN) and will also affect the accuracy of modeling WBSN in health care application. Much of the mobility scenarios generated in current work of wireless body sensor networks has used fairly simple models to generate the mobile topological graph, which bear little resemblance to the actual mobility patterns. This paper is the first attempt to investigate the mobility model in WBSN based on the existing mobility models in wireless data networks and ad hoc networks. We first briefly review the existing mobility models in related research areas such as wireless ad hoc network and cellular networks. Further on, we propose a dedicated and more realistic mobility model named BAMM (Body Area Mobility Model) for wireless body sensor networks by concentrating on the unique characteristics of WBSN and finally study the effects of mobility on the performance of WBSN by simulation experiments.

In wireless sensor networks, sensor nodes are limited in memory, battery power and computational power. Wireless Sensor Networks (WSN) are a specific category of wireless adhoc networks where their performance is highly affected by application, lifetime, storage capacity, topology changes and the communication medium and bandwidth. Whenever the traffic load in the network increases, buffer at a node becomes full and it cannot handle any more data packets. This causes packet loss and retransmission which affects delivery ratio, energy and decreases network lifetime. Congestion is an important issue in wireless networks. Congestion in WSN severely affects loss rate, channel quality, the number of retransmissions, traffic flow, network lifetime, delay, energy as well as throughput. The congestion can be resolved in WSN either by reducing the data rate or by increasing the resources to form alternative paths. In this paper, an Implementation of Improved TOPSIS Method for congestion control in WSN known as Improved Hierarchical tree Alternative path protocol has been proposed which provides an improved performance over the basic HTAP protocol.

Safe path-finding is extremely necessary for multihop wireless systems such as Wireless Sensor Networks. Multihop wireless systems are more unprotected to safety outbreaks as associated to single-stage wireless networks. Cross-layer design production is a precise significant character for wireless sensor Advanced security network is significant submissions. for the achievement of announcement among sensor nodes in wireless sensor network because the numbers composed is regularly less and the network is most vulnerable. Numerous Security methods have been suggested to deliver safety resolutions besides numerous threats to the Cross layer modification techniques in Wireless sensor networks. In this paper we overview the existing schemes for the security of cross-layer design in wireless sensor networks. The proposed Security model will provide more security between sensor nodes and the base station in wireless sensor network. Security is important for the success of the wireless sensor network because the data collected are often sensitive and the network is particularly vulnerable. In the cross-layer design, constraints are substituted between changed layers to protect the well-organized use of energy. In this paper, we propose a secure security model that is based on cross-layer design. It uses a cross layer optimization Machine Reproduction consequences confirm that our proposed safety model better in many situations and in unpromising violence-disposed to the situation.

Wireless networking is a crucial component of communication in this era of digitization. The key characteristics that determine a wireless network's performance are smooth connectivity, quicker communication, and increased customer satisfaction. Scalability deals with the erratic workload and new resources that are added to the network. Scalability is crucial for both Quality of Experience (QoE) and Quality of Service (QoS) in such a power-constrained environment because wireless devices are battery-operated. Managing power consumption and network performance simultaneously in scalable networking scenario is quite challenging, especially during handover. This research proposed a methodology to assess the impact of scalability on wireless node power consumption and network performance in order to develop energy-efficient handoff mechanisms. The Type-I and Type-II wireless node sets were used between the WiFI and WiMAX networks in a vertical handover scenario. In the study, two distinct scalability scenarios were taken into account. Three distinct voltage levels—cutoff voltage, nominal voltage, and charge voltage —had been used to examine the consumption of power. Throughput, residual energy, and Packet Delivery Ratio (PDR) were computed to examine the network's performance in a scalable, power-constrained context. Two different scalability scenarios were considered in the study. The power consumption was investigated using three different voltage levels: charge voltage, nominal voltage, and cutoff voltage. The network's performance under scalable, power-constrained conditions was investigated by computing throughput, packet delivery ratio (PDR), and residual energy. The result obtained in the study showed the variation in battery drainage of wireless nodes under the effect of various scalability factors. This study will provide a blueprint for developing novel algorithms which eventually will improvise network performance and strengthen the base of Green Networking.

Monitoring of water sources is a major concern worldwide. Wireless sensor networks (WSN) may be used for this monitoring. However, current systems employ mainly physical sensors for variables such as temperature, pressure, humidity and light. Wireless chemical sensors networks (WCSNs) for environmental monitoring are scarce due to the lack of autonomy of conventional sensors. This paper presents results of a WCSN for monitoring pH based on ion selective field effect transistors (ISFETs). Sensing nodes employ a human interface required for in situ calibration of chemical sensors. Unlike most studies, our work evaluates the network employing chemical measurements and wireless network metrics. Results show zero packet losses by using a time division multiple access (TDMA) protocol. The network allows wireless communication within 300m including attenuation from buildings and trees. Therefore, the system presented in this paper is suitable for long range applications with unobstructed line of sight. pH measurements present a standard deviation below 1%, showing high repeatability. When compared to a commercial pH meter, difference in measurements is below 5%. As a consequence, accuracy is adequate for the application. Measurements also presented high stability during 3 h of continuous measurement.