Predictive analytics of disc brake deformation using machine learning

For the safe and economical construction of embankment dams, the mechanical behaviour of the rockfill materials used in the dam’s shell must be analyzed. The characterization of rockfill materials with specified shear strength is difficult and expensive due to the presence of particles greater than 500 mm in diameter. This work investigates the feasibility of using an extreme gradient boosting (XGBoost) computing paradigm to estimate the shear strength of rockfill materials. To train and validate the proposed XGBoost model, a total of 165 databases obtained from the literature are chosen. The XGBoost model was compared against support vector machine (SVM), adaptive boosting (AdaBoost), random forest (RF), and K‐nearest neighbor (KNN) models described in the literature. XGBoost beats SVM, RF, AdaBoost, and KNN models in terms of performance evaluation metrics such as coefficient of determination ( R 2 ), Nash–Sutcliffe coefficient (NSE), and error in the root mean square ratio (RMSE) to the standard deviation of the measured data (RSR). The results demonstrated that the XGBoost model has the highest prediction performance with ( R 2 = 0.9707, NSE = 0.9701, and RSR = 0.1729), followed by the SVM model with ( R 2 = 0.9655, NSE = 0.9639, and RSR = 0.1899), RF ( R 2 = 0.9545, NSE = 0.9542, and RSR = 0.2140), the AdaBoost model with ( R 2 = 0.9390, NSE = 0.9388, and RSR = 0.2474) and the KNN model with ( R 2 = 0.6233, NSE = 0.6180, and RSR = 0.6181). A sensitivity analysis has been conducted to ascertain the impact of each investigated input parameter. This study demonstrates that the established XGBoost model for estimating the shear strength of rockfill materials is reliable.

Comparative study of different machine learning models in landslide susceptibility assessment: A case study of Conghua District, Guangzhou, China

Background and aimsThe birth weight of a newborn is a crucial factor that affects their overall health and future well-being. Low birth weight (LBW) is a widespread global issue, which the World Health Organization defines as weighing less than 2,500 g. LBW can have severe negative consequences on an individual’s health, including neonatal mortality and various health concerns throughout their life. To address this problem, this study has been conducted using BDHS 2017–2018 data to uncover important aspects of LBW using a variety of machine learning (ML) approaches and to determine the best feature selection technique and best predictive ML model.MethodsTo pick out the key features, the Boruta algorithm and wrapper method were used. Logistic Regression (LR) used as traditional method and several machine learning classifiers were then used, including, DT (Decision Tree), SVM (Support Vector Machine), NB (Naïve Bayes), RF (Random Forest), XGBoost (eXtreme Gradient Boosting), and AdaBoost (Adaptive Boosting), to determine the best model for predicting LBW. The model’s performance was evaluated based on the specificity, sensitivity, accuracy, F1 score and AUC value.ResultsResult shows, Boruta algorithm identifies eleven significant features including respondent’s age, highest education level, educational attainment, wealth index, age at first birth, weight, height, BMI, age at first sexual intercourse, birth order number, and whether the child is a twin. Incorporating Boruta algorithm’s significant features, the performance of traditional LR and ML methods including DT, SVM, NB, RF, XGBoost, and AB were evaluated where LR, had a specificity, sensitivity, accuracy and F1 score of 0.85, 0.5, 85.15% and 0.915. While the ML methods DT, SVM, NB, RF, XGBoost, and AB model’s respective accuracy values were 85.35%, 85.15%, 84.54%, 81.18%, and 84.41%. Based on the specificity, sensitivity, accuracy, F1 score and AUC, RF (specificity = 0.99, sensitivity = 0.58, accuracy = 85.86%, F1 score = 0.9243, AUC = 0.549) outperformed the other methods. Both the classical (LR) and machine learning (ML) models’ performance has improved dramatically when important characteristics are extracted using the wrapper method. The LR method identified five significant features with a specificity, sensitivity, accuracy and F1 score of 0.87, 0.33, 87.12% and 0.9309. The region, whether the infant is a twin, and cesarean delivery were the three key features discovered by the DT and RF models, which were implemented using the wrapper technique. All three models had the identical F1 score of 0.9318. However, “child is twin” was recognized as a significant feature by the SVM, NB, and AB models, with an F1 score of 0.9315. Ultimately, with an F1 score of 0.9315, the XGBoost model recognized “child is twin” and “age at first sex” as relevant features. Random Forest again beat the other approaches in this instance.ConclusionsThe study reveals Wrapper method as the optimal feature selection technique. The ML method outperforms traditional methods, with Random Forest (RF) being the most effective predictive model for Low-Birth-Weight prediction. The study suggests that policymakers in Bangladesh can mitigate low birth weight newborns by considering identified risk factors.

Hypothyroidism (hypo means “under” or “below normal”) is the most common thyroid disease. It affects people worldwide irrespective of sex, age, race, and level of education, and wealth. The hypothyroid disease diagnosis in the early stage will help take precautions in preventing future complications. This work focuses on implementing a Machine Learning (ML)-based real-time hypothyroid disease classification framework. The hypothyroid dataset from UCI was employed to build the ML models. The K-Nearest Neighbor (KNN), Random Forest (RF), and Decision Tree (DT) ML models were implemented and achieved an accuracy of 98% for all models. Later the Min-Max Scaler data normalization technique was applied to improve the performance and achieved average accuracy of 99% for both RF and DT models. The hypothyroid dataset has imbalanced data. In such a case, F1-score is an important metric to evaluate the model performance. K-fold cross validation technique is applied to cross-validate the models. The average F1-score was found to be 0.94 for the RF model, whereas 0.92 for DT and 0.9 for KNN. This performance indicates RF model is performing well for predicting hypothyroidism and also outperforms the models reported in the literature.

BackgroundA considerable portion of patients with fever of unknown origin (FUO) present concomitant lymphadenopathy. Diseases within the spectrum of FUO accompanied by lymphadenopathy include lymphoma, infections, and rheumatic diseases. Particularly, lymphoma has emerged as the most prevalent etiology of FUO with associated lymphadenopathy. Distinguishing between benign and malignant lymph node lesions is a major challenge for physicians and an urgent clinical concern for patients. However, conventional imaging techniques, including PET/CT, often have difficulty accurately distinguishing between malignant and benign lymph node lesions. This study utilizes PET/CT radiomics to differentiate between lymphoma and benign lymph node lesions in patients with FUO, aiming to improve diagnostic accuracy.ResultsData were collected from 204 patients who underwent 18F-FDG PET/CT examinations for FUO, including 114 lymphoma patients and 90 patients with benign lymph node lesions. Patients were randomly divided into training and testing groups at a ratio of 7:3. A total of 15 effective features were obtained by the least absolute shrinkage and selection operator (LASSO) algorithm. Machine learning models were constructed using logistic regression (LR), support vector machine (SVM), random forest (RF), and k-nearest neighbors (KNN) algorithms. In the training group, the area under the curve (AUC) values for predicting lymphoma and benign cases by LR, SVM, RF, and KNN models were 0.936, 0.930, 0.998, and 0.938, respectively. There were statistically significant differences in AUC between the RF and other models (all P < 0.001). In the testing group, the AUC values for the four models were 0.860, 0.866, 0.915, and 0.891, respectively, with no statistically significant differences observed among them (all P > 0.05). The decision curve analysis (DCA) curves of the RF model outperformed those of the other three models in both the training and testing groups.ConclusionsPET/CT radiomics demonstrated promising performance in discriminating lymphoma from benign lymph node lesions in patients with FUO, with the RF model showing the best performance.

Applying data mining techniques to classify patients with suspected hepatitis C virus infection

Developing machine learning models with multi-source environmental data to predict wheat yield in China

PurposeMachine learning models were developed and validated to identify lung adenocarcinoma (LUAD) and lung squamous cell carcinoma (LUSC) using clinical factors, laboratory metrics, and 2-deoxy-2[18F]fluoro-D-glucose ([18F]F-FDG) positron emission tomography (PET)/computed tomography (CT) radiomic features.MethodsOne hundred and twenty non-small cell lung cancer (NSCLC) patients (62 LUAD and 58 LUSC) were analyzed retrospectively and randomized into a training group (n = 85) and validation group (n = 35). A total of 99 feature parameters—four clinical factors, four laboratory indicators, and 91 [18F]F-FDG PET/CT radiomic features—were used for data analysis and model construction. The Boruta algorithm was used to screen the features. The retained minimum optimal feature subset was input into ten machine learning to construct a classifier for distinguishing between LUAD and LUSC. Univariate and multivariate analyses were used to identify the independent risk factors of the NSCLC subtype and constructed the Clinical model. Finally, the area under the receiver operating characteristic curve (AUC) values, sensitivity, specificity, and accuracy (ACC) was used to validate the machine learning model with the best performance effect and Clinical model in the validation group, and the DeLong test was used to compare the model performance.ResultsBoruta algorithm selected the optimal subset consisting of 13 features, including two clinical features, two laboratory indicators, and nine PEF/CT radiomic features. The Random Forest (RF) model and Support Vector Machine (SVM) model in the training group showed the best performance. Gender (P=0.018) and smoking status (P=0.011) construct the Clinical model. In the validation group, the SVM model (AUC: 0.876, ACC: 0.800) and RF model (AUC: 0.863, ACC: 0.800) performed well, while Clinical model (AUC:0.712, ACC: 0.686) performed moderately. There was no significant difference between the RF and Clinical models, but the SVM model was significantly better than the Clinical model. ConclusionsThe proposed SVM and RF models successfully identified LUAD and LUSC. The results indicate that the proposed model is an accurate and noninvasive predictive tool that can assist clinical decision-making, especially for patients who cannot have biopsies or where a biopsy fails.

BackgroundLumbar drainage is widely used in the clinic; however, forecasting lumbar drainage-related meningitis (LDRM) is limited. We aimed to establish prediction models using supervised machine learning (ML) algorithms.MethodsWe utilized a cohort of 273 eligible lumbar drainage cases. Data were preprocessed and split into training and testing sets. Optimal hyper-parameters were archived by 10-fold cross-validation and grid search. The support vector machine (SVM), random forest (RF), and artificial neural network (ANN) were adopted for model training. The area under the operating characteristic curve (AUROC) and precision-recall curve (AUPRC), true positive ratio (TPR), true negative ratio (TNR), specificity, sensitivity, accuracy, and kappa coefficient were used for model evaluation. All trained models were internally validated. The importance of features was also analyzed.ResultsIn the training set, all the models had AUROC exceeding 0.8. SVM and the RF models had an AUPRC of more than 0.6, but the ANN model had an unexpectedly low AUPRC (0.380). The RF and ANN models revealed similar TPR, whereas the ANN model had a higher TNR and demonstrated better specificity, sensitivity, accuracy, and kappa efficiency. In the testing set, most performance indicators of established models decreased. However, the RF and AVM models maintained adequate AUROC (0.828 vs. 0.719) and AUPRC (0.413 vs. 0.520), and the RF model also had better TPR, specificity, sensitivity, accuracy, and kappa efficiency. Site leakage showed the most considerable mean decrease in accuracy.ConclusionsThe RF and SVM models could predict LDRM, in which the RF model owned the best performance, and site leakage was the most meaningful predictor.

In recent years, COVID-19 has been regarded as the most dangerous pandemic for several countries. On various social media platforms, such as Twitter, Facebook, and Instagram, a variety of rumours, hypes, and news are published. This might have a detrimental impact on people’s life. As a result, social media platforms have always had a difficult time authenticating this fake information. Different machine learning (ML) and deep learning (DL) classifiers were used in this work to categorize the continuing impacts of tweets and forecast their after-effects. Support vector machine (SVM), random forest (RF), decision tree (DT), and k-nearest neighbor (KNN) were used for classification, while AdaBoost and convolutional neural network (CNN) were utilized for future effects. The tweets dataset from Kaggle was used to train the SVM, RF, KNN, and DT models, which were then assessed on multiple evaluation criteria such as accuracy, precision, recall, and F1-score, using a 70 : 30 ratio. The CNN and AdaBoost, on the other hand, have been taught to detect the mean square error, root mean square error, and mean absolute error. With 0.74 and 0.73 percent score out of 1, respectively, RF and SVM exhibit the best accuracy in impact when classifying the outcomes on the obtained dataset. In terms of a regression problem, CNN beat the ADA Regressor across the board.

BackgroundTranscutaneous transhepatic gallbladder drainage (PTGBD) has shown significant efficacy in the treatment of elderly patients with acute cholecystitis. The goal of this study is to develop a machine learning-based web calculator aimed at predicting the optimal timing for cholecystectomy (LC) after PTGBD in elderly patients with acute cholecystitis (AC) to achieve precise personalized medicine.MethodsA retrospective analysis of 979 elderly patients with acute cholecystitis admitted to Jinzhou Central Hospital and the First Affiliated Hospital of Jinzhou Medical University from 2013 to 2024 was performed, and a total of 680 patients were included in the model development. Patients were divided into delayed (347 cases, surgery > 6 weeks post-PTGBD) and non-delayed (333 cases) groups based on the interval between PTGBD and LC. Minimal Absolute Contraction and Selection Operator (LASSO) and logistic analysis were used to determine the predictors of postponement of LC in elderly patients with AC after PTGBD. Next, we used eight ML algorithms, namely Logistic Regression (LR), Decision Tree (DT), Random Forest (RF), Extreme gradient boosting (XGB), Support Vector Machine (SVM), Multilayer Perceptron (MLP), K-nearest Neighbor (KNN), Gaussian Naive Bayes (GNB), to train and develop ML models using a 10x cross-validation method. The performance of the model was evaluated by a variety of indicators, including the area under the receiver operating characteristic curve (ROC), calibration curve, decision curve, PR curve, and confusion matrix. In addition, model interpretation is performed through Shapley Additive Interpretation (SHAP) analysis to clarify the importance of each feature of the model and its basis for decision-making. Finally, we chose to use the best model to develop a web-based calculator that could be used to predict the likelihood of delaying LC after PTGBD in elderly AC patients.ResultsIn multivariate logistic regression analysis, age, sex, gallbladder wall thickness, time between onset and PTGBD, white blood cell count (WBC), C-reactive protein (CRP), and neutrophil-to-lymphocyte ratio (NLR) were identified as independent predictors of delayed LC in elderly patients with AC after PTGBD. In the training set, the area under the receiver operating characteristic curve (AUC) values for these models ranged from 0.808 to 0.914, with the random forest (RF) model showing the highest AUC value. Through the evaluation of decision curve analysis (DCA), precision-recall (PR) curve and calibration curve, the RF model showed superior clinical decision support and prediction performance compared with the other seven models. Finally, we used the RF model to build an online network calculator, which aims to accurately assist doctors in making more informed and accurate clinical decisions and promote the wide application of the model in clinical practice (https://zw17786325639.shinyapps.io/Postpone/).ConclusionsThis study developed and validated an RF model network calculator based on clinical indicator information to assess the likelihood of delaying LC after PTGBD in elderly patients with acute cholecystitis. This tool is expected to assist physicians in making more appropriate clinical decisions for patients.

A method for accurately classifying donkey breeds has been developed by integrating single nucleotide polymorphism (SNPs) data with machine learning algorithms. The approach includes preprocessing donkey genomic sequencing data, addressing data imbalance with the Synthetic Minority Over-sampling Technique (SMOTE), and utilizing an improved Leave-One-Out Cross-Validation (LOOCV) for dataset partitioning. Support Vector Machine (SVM), K-Nearest Neighbors (KNN), and Random Forest (RF) models were constructed and evaluated. The results demonstrated that different chromosomes significantly influence classifier performance. For instance, chromosome Chr2 showed the highest classification accuracy with KNN, while chromosome Chr19 performed best with SVM and RF models. After enhancing data quality and addressing imbalances, classification performance improved substantially, with accuracy, precision, recall, and F1 score showing increases of up to 15% in certain models, particularly on key chromosomes. This method offers an effective solution for donkey breed classification and provides technical support for the conservation and development of donkey genetic resources.

Existing studies have attempted to determine the tool chipping condition using the indirect method of data capture and intelligent analysis techniques considering machine parameters, and tool conditions using signal processing techniques. Due to the obstructive nature of the machining operation, however, it is daunting to use signal capturing to intelligently capture the condition of the tool as well as that of the workpiece. This study aimed to apply some advanced signal processing techniques to the vibration signals captured experimentally during machining operation for the decision making and analysis of tool and workpiece conditions. Vibration signals were captured during turning operations while using four (4) classes of tools, based on their flank wear. The signals were first pre-processed and decomposed using the Empirical Mode Decomposition (EMD) method. The Hilbert–Huang transform (HHT) was applied to the resulting IMFs obtained to compute the feature vectors used to classify the condition of the tool and workpiece. A total of 12 features, consisting of instantaneous properties such as instantaneous energy, instantaneous frequencies, and amplitudes, were obtained for data training and classification of tool conditions. To optimize the classification process, feature selection was performed using a genetic algorithm (GA) to reduce the number of features from 12 to 4 for data training and classification. The feature vectors were first trained for tool classification with a neural network scaled conjugate gradient (SCG) algorithm. The result showed that the model classification error was 0.102. Two other machine learning models, support vector machine (SVM) and K-Nearest Neighbors (KNN), were also implemented for classifying the tool conditions, from the feature vector, to determine the model that most accurately predicted the condition of the tool. To avoid bias and reduce misclassification errors, the k-fold cross-validation technique was applied with ‘k’ taken as 5 and 10. The computed feature vectors were used as inputs to train the machine learning model using both SVM and KNN models to classify the tool and workpiece condition during machining. The error loss of each model was evaluated and plotted to review the performance. The average overall error loss of 0.5031 was observed for the SVM model with 5-fold cross-validation, whereas the error loss of 0.0318 was observed for the KNN model with 5-fold cross-validation. The average overall error loss of 0.5009 was observed for the SVM model with 10-fold cross-validation when trained using the features selected by a genetic algorithm (GA), while the average overall error loss of 0.0343 was observed for the KNN model. The optimal performance of the SVM model was obtained when all features were used for the training, whereas the KNN model performed better when feature selection was implemented. The error losses of the models were evaluated to be less in KNN models, compared to SVM and SCG. The obtained results also showed that the developed KNN models performed 10 times better than the SVM model in predicting the tool condition from the captured vibration signal during the machining process.

The increasing prevalence of advanced technology in sports has empowered athletes, coaches, and team management to elevate their performance and fine-tune team tactics. Notably, player collaborations have emerged as a critical factor in reshaping the dynamics of matches, yet a lack of tools for accurate partnership analysis often leads to instinct-driven decisions rather than data-based insights. The aim of this study is to investigate the potential of harnessing machine learning algorithms to evaluate the significance of player partnerships in football and their potential impact on match out-comes. This study innovatively forecasts player partnership formations in live matches, demonstrating adept management of extensive, unstructured datasets to create a robust solution. It offers valuable insights for coaches to predict and build effective player partnerships, resulting in sustainable advantages for the team. The research utilizes machine learning techniques, including Logistic Regression (LR), Decision Tree (DT), K-nearest Neighbor (KNN), Support Vector Machine (SVM), Multinomial Naïve Bayes (MNB), and Random Forest (RF) classifiers. These models were applied and evaluated to construct models and assess player partnerships. Necessary data was sourced from the Kaggle dataset, which encompasses information on 167,798 player assists from 9,074 European league football matches spanning six seasons across five leagues. Machine learning models underwent training and evaluation through an 80 − 20 data split and further verified through cross-validation to ensure robustness across league datasets. Balanced sampling and k-fold cross-validation were used to mitigate data imbalance and validate model generalization. Notably, the SVM, DT and RF models demonstrated impressive accuracy of 99%, with the highest F1-score of 0.99, encompassing all football leagues. The SVM and RF models also achieved the highest precision, at 0.99, albeit with a relatively longer computation time of up to 60 s. Model performance varied marginally across leagues (± 0.3% standard deviation in accuracy and F1-score), indicating stable predictive behaviour across gameplay variations. Unlike prior studies that analyzed team synchronization or motion dynamics, this work uniquely models player partnerships based on assist-goal frequency patterns and forecasts their continuity across matches using machine learning classifiers. This study provides valuable insights for devising strategies that can confer a competitive edge in matches. The findings offer a practical means for team managers and coaches to make well-informed decisions regarding player partnerships.

BackgroundCranial, facial, nasal, and maxillary widths have been shown to be significantly affected by the individual’s sex. The present study aims to use measurements of dental arch and maxillary skeletal base to determine sex, employing supervised machine learning.Materials and methodsMaxillary and mandibular tomographic examinations from 100 patients were analyzed to investigate the inter-premolar width, inter-molar width, maxillary width, inter-pterygoid width, nasal cavity width, nostril width, and maxillary length, obtained through Cone Beam Computed Tomography scans. The following machine learning algorithms were used to build the predictive models: Logistic Regression, Gradient Boosting Classifier, K-Nearest Neighbors (KNN), Support Vector Machine (SVM), Multi-Layer Perceptron Classifier (MLP), Decision Tree, and Random Forest Classifier. A 10-fold cross-validation approach was adopted to validate each model. Metrics such as area under the curve (AUC), accuracy, recall, precision, and F1 Score were calculated for each model, and Receiver Operating Characteristic (ROC) curves were constructed.ResultsUnivariate analysis showed statistical significance (p < 0.10) for all skeletal and dental variables. Nostril width showed greater importance in two models, while Inter-molar width stood out among dental measurements. The models achieved accuracy values ranging from 0.75 to 0.85 on the test data. Logistic Regression, Random Forest, Decision Tree, and SVM models had the highest AUC values, with SVM showing the smallest disparity between cross-validation and test data for accuracy metrics.ConclusionTransverse dental arch and maxillary skeletal base measurements exhibited strong predictive capability, achieving high accuracy with machine learning methods. Among the evaluated models, the SVM algorithm exhibited the best performance. This indicates potential usefulness in forensic sex determination.