Protein multiple sequence alignment by hybrid bio-inspired algorithms

The multiple sequence alignment (MSA) problem has become relevant to several areas in bioinformatics from finding sequences family, detecting structural homologies of protein/DNA sequences, determining functions of protein/DNA sequences to predict patients diseases by comparing DNAs of patients in disease discovery, etc. The MSA is a NP-hard problem. In this paper, two new methods based on a cultural algorithm, namely the method of musical composition, for the solution of the MSA problem are introduced. The performance of the first and second versions were evaluated and analyzed on 26 and 12 different benchmark alignments, respectively. Test instances were taken from BAliBASE 3.0. Alignment accuracies are computed using the QSCORE program, which is a quality scoring program that compares two multiple sequence alignments. Numerical results on the tackled instances indicate that the performance levels of the proposed versions of the MMC are promising. In particular, the experimental results show that the second version found the best alignment reported in the specialized literature in 25 $$\%$$% of the tested instances. Besides, for 50 $$\%$$% of the tested instances, the second version achieved the second best alignment. Finally, the significance of the numerical results were analyzed according to the Wilcoxon rank-sum test, which indicated that the second proposed version is statistically similar to some state-of-the-art techniques for the MSA problem.

Multiple protein sequence alignment using double-dynamic programming

Multiple protein sequence alignment using double-dynamic programming.

An algorithm is presented for the accurate and rapid generation of multiple protein sequence alignments from tertiary structure comparisons. A preliminary multiple sequence alignment is performed using sequence information, which then determines an initial superposition of the structures. A structure comparison algorithm is applied to all pairs of proteins in the superimposed set and a similarity tree calculated. Multiple sequence alignments are then generated by following the tree from the branches to the root. At each branchpoint of the tree, a structure-based sequence alignment and coordinate transformations are output, with the multiple alignment of all structures output at the root. The algorithm encoded in STAMP (STructural Alignment of Multiple Proteins) is shown to give alignments in good agreement with published structural accounts within the dehydrogenase fold domains, globins, and serine proteinases. In order to reduce the need for visual verification, two similarity indices are introduced to determine the quality of each generated structural alignment. Sc quantifies the global structural similarity between pairs or groups of proteins, whereas Pij' provides a normalized measure of the confidence in the alignment of each residue. STAMP alignments have the quality of each alignment characterized by Sc and Pij' values and thus provide a reproducible resource for studies of residue conservation within structural motifs.

This paper presents a parallel hybrid genetic algorithm (GA) for solving the sum-of-pairs multiple protein sequence alignment. A new chromosome representation and its corresponding genetic operators are proposed. A multi-population GENITOR-type GA is combined with local search heuristics. It is then extended to run in parallel on a multiprocessor system for speeding up. Experimental results of benchmarks from the BAliBASE show that the proposed method is superior to MSA, OMA, and SAGA methods with regard to quality of solution and running time. It can be used for finding multiple sequence alignment as well as testing cost functions.

CLEMAPS is a tool for multiple alignment of protein structures. It distinguishes itself from other existing algorithms for multiple structure alignment by the use of conformational letters, which are discretized states of 3D segmental structural states. A letter corresponds to a cluster of combinations of three angles formed by C(alpha) pseudobonds of four contiguous residues. A substitution matrix called CLESUM is available to measure the similarity between any two such letters. The input 3D structures are first converted to sequences of conformational letters. Each string of a fixed length is then taken as the center seed to search other sequences for neighbors of the seed, which are strings similar to the seed. A seed and its neighbors form a center-star, which corresponds to a fragment set of local structural similarity shared by many proteins. The detection of center-stars using CLESUM is extremely efficient. Local similarity is a necessary, but insufficient, condition for structural alignment. Once center-stars are found, the spatial consistency between any two stars are examined to find consistent star duads using atomic coordinates. Consistent duads are later joined to create a core for multiple alignment, which is further polished to produce the final alignment. The utility of CLEMAPS is tested on various protein structure ensembles.

BackgroundStructural alignment of RNAs is becoming important, since the discovery of functional non-coding RNAs (ncRNAs). Recent studies, mainly based on various approximations of the Sankoff algorithm, have resulted in considerable improvement in the accuracy of pairwise structural alignment. In contrast, for the cases with more than two sequences, the practical merit of structural alignment remains unclear as compared to traditional sequence-based methods, although the importance of multiple structural alignment is widely recognized.ResultsWe took a different approach from a straightforward extension of the Sankoff algorithm to the multiple alignments from the viewpoints of accuracy and time complexity. As a new option of the MAFFT alignment program, we developed a multiple RNA alignment framework, X-INS-i, which builds a multiple alignment with an iterative method incorporating structural information through two components: (1) pairwise structural alignments by an external pairwise alignment method such as SCARNA or LaRA and (2) a new objective function, Four-way Consistency, derived from the base-pairing probability of every sub-aligned group at every multiple alignment stage.ConclusionThe BRAliBASE benchmark showed that X-INS-i outperforms other methods currently available in the sum-of-pairs score (SPS) criterion. As a basis for predicting common secondary structure, the accuracy of the present method is comparable to or rather higher than those of the current leading methods such as RNA Sampler. The X-INS-i framework can be used for building a multiple RNA alignment from any combination of algorithms for pairwise RNA alignment and base-pairing probability. The source code is available at the webpage found in the Availability and requirements section.

This paper presents a novel approach for solving the Multiple Sequence Alignment (MSA) problem. K-Means clustering is combined with the Rubber Band Technique (RBT) to introduce an iterative optimization algorithm, namely RBT-Km, to find the optimal alignment for a set of input protein sequences. In this technique, the MSA problem is modeled as a Rubber Band, while the solution space is modeled as plate with several poles corresponding locations in the input sequences that are most likely to be correlated and/or biologically related. K-Means clustering is then used to discriminate biologically related locations from those that may appear by chance. RBT-Km is tested with one of the well-known benchmarks in this field (BALiBASE 2.0). The results demonstrate the superiority of the proposed technique even in the case of formidable sequences.

This chapter describes the Multiple Carbohydrate Alignment with Weights (MCAW) tool, which is available as a part of the RINGS (Resource for INformatics of Glycomes at Soka) website. It implements a combination of KCaM (Aoki, Yamaguchi, Ueda, et al., Nucl Acids Res 32:W267-W272, 2004), a pairwise glycan alignment algorithm, and ClustalW (Thompson, Higgins, Gibson, Nucleic Acids Res 22:4673-80, 1994), a weighted multiple protein sequence alignment algorithm. This tool computes the multiple glycan alignment by first computing a guide tree to determine the order by which to progressively add glycans to the multiple alignment. The dynamic programming algorithm results in a glycan profile of the alignment glycans, containing "monosaccharide positions" indicating the ratio of monosaccharides and their glycosidic bonds that are aligned at the corresponding position. This tool has been used to analyze databases of glycan array experimental data, incorporating weights to reflect the biological significance of certain glycans over others. As a result, it has been shown that the alignments obtained are biologically relevant, matching the results as found in the literature.

Problem statement: The parallelization of multiple progressive alignment algorithms is a difficult task. All known methods have strong bottlenecks resulting from synchronization delays. This is even more constraining in distributed memory systems, where message passing also delays the interprocess communication. Despite these drawbacks, parallel computing is becoming increasingly necessary to perform multiple sequence alignment. Approach: In this study, it is introduced a solution for parallelizing multiple progressive alignments in distributed memory systems that overcomes such delays. Results: The proposed approach uses threads to separate actual alignment from synchronization and communication. It also uses a different approach to schedule independent tasks. Conclusion/Recommendations: The approach was intensively tested, producing a performance remarkably better than a largely used algorithm. It is suggested that it can be applied to improve the performance of some multiple alignment tools, as CLUSTALW and MUSCLE.

Multiple sequence alignment (MSA) methods infer the homologous regions within DNA and protein sequences. Among the other algorithms for MSA, the center star method (CSM) is useful when processing a large number of sequences. In this method, the partially conserved regions among the non-center sequences tend to hide in the alignment. Therefore, existence of subsets of similar sequences in the input set leads to a significant accuracy loss. As a solution to the above problem, this research introduces an algorithm for MSA based on a solution proposed by D. Gusfield in 1991. In this research, the sequences are first grouped into subsets, aligned separately using CSM and finally these alignments are merged by applying progressive alignment procedure. The detailed solution for this problem is presented in the following section.

Background: Due to the growing amount of biological data, it is often necessary to select the most optimal estimation method for DNA sequence alignment across livestock species. One of the most important benches of genomics is to modelling homology between considered DNA sequences. A multiple sequence alignment is a potent tool for molecular and evolutionary biology, and there are several programs and algorithms applicable for this purpose. The purpose of this paper was to study the most commonly used DNA alignment algorithms to select the optimal tool dedicated for short sequences.Methods: Four steps of bioinformatics pipelines were considered to benchmark the algorithms for multiple DNA sequence alignment across livestock species: 1) selection of reference genome sequences of ARS1.2 for cattle, EquCab3.0 for horse and vicPac2 for alpaca with a low E-value using TBLASTn 2) removing gaps for these sequences 3) alignment of obtained sequences using examined algorithms 4) matching the quality of aligned sequences with sequences of reference genomes by more software. The time of computation was archived for the whole analysis. The seven programs were utilized, each based on different alignment algorithms, namely: ClustalO, ClustalW, Kalign, MAFFT, MUSCLE, Probcons and T-Coffee.Results: The result obtained in this study showed that the fastest is progressive algorithms such as Kalign or MUSCLE-FAST. Moreover, the iterative algorithms like MAFFT and MUSCLE revealed a higher quality of the alignment. The T-Coffee and Probcons programs were computational cost-effective; simultaneously, they were generating a medium-quality calculation in a relatively long time. The best quality of alignment was shown by iterative variants of the MAFFT program; however, the speed of the calculations was relatively low. The fastest algorithm was Kalign, making alignment much faster than the competitors, but achieving average results in the quality of the alignment. The average speed ratio concerning the quality of the analyzed algorithms was obtained by the progressive version of MAFFT, NS1.Conclusions: We conclude that the results of this study can be used to re-alignment of variant primers in new livestock genome releases.

Multiple Sequences Alignment (MSA) Bioinformatics plays quite an important role in the fields of biological model of correlation sequences. The Human Genome Project and haplotype Project make the MSA become the research hot spot in the world again. The MSA is one of the most important and the most challenge work in bioinformatics. The sequence is basic mathematical model in Bioinformatics. is a structure of nucleic acid molecule and protein molecule. The sequence of operations helps to study biological macromolecules. The MSA is one of the most important problems in the Computational Molecular Biology and is also one of the difficult problems at present.

The problem of multiple sequence alignment (MSA) in biology has been studied extensively. In this paper we offer sampling based algorithms for MSA that are more accurate than existing algorithms. The performance of our algorithms has been evaluated using the standard BaliBase dataset [10]. We are able to improve the average alignment SP score for ClustalW [9] and MAFFT [6] by 16.39% and 12.2 %, respectively and the TC score by 55.4% and 46.9%, respectively using sampling. Given that ClustalW and MAFFT are some of the most accurate algorithms for MSA currently and are widely used, our algorithms would be of interest to biologists.

The conventional multiple sequence alignment algorithms are classi ed into two categories: iterative improvement strategies (e.g., [1]) and simulated annealing methods (e.g., [6]). Recently, a genetic algorithm has been used in computational molecular biology as a powerful combinatorial optimizer. A genetic algorithm has been applied to the problem of multiple sequence alignment on a parallel computer (e.g., [7]). In a simple genetic algorithm [3], a solution of a given problem is represented as \chromosomes which consists of bit strings of 0's and 1's. The genetic operations, such as reproduction, crossover and mutation, are applied to a population of chromosomes to create a new population of chromosomes. This process is repeated many times so that we can obtain a nearly optimal alignment. Here, we propose a improved method to apply a genetic algorithm to the problem of multiple sequence aligment. The processing was performed on a Fujitsu SPARCstation 20 and NEC UP4800.