PYROMET 350

AISI Type 204 is a chromium-nickel-manganese type stainless steel comparable in properties to Type 304 stainless steel. It is austenitic, non-magnetic, and highly corrosion resistant. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-163. Producer or source: Stainless steel mills.

ARMCO 25-12 is an austenitic chromium-nickel stainless steel with high heat resisting qualities, high strength and creep values up to 2000 F. It is equivalent to AISI Type 309 stainless steel; and in the lower carbon grade is equivalent to AISI Type 309S. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-32. Producer or source: Armco Inc., Eastern Steel Division.

ARMCO 400 is a low-chromium (low-cost) non-hardenable ferritic stainless steel with relatively high corrosion and oxidation resistance and good fabricating characteristics: This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: SS-250. Producer or source: Armco Steel Corporation, Advanced Materials Division.

MISCO-C is a 29% Cr-9% Ni type casting alloy having high corrosion and heat resistance. It is a type CE-30 stainless steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and joining. Filing Code: SS-15. Producer or source: Michigan Steel Casting Company, Alloy Casting Division. Originally published June 1954, revised April 1965.

REMANIT 4565S is a fully austenitic stainless steel which features both high strength and excellent corrosion resistance in a wide range of corrosive media. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming and heat treating. Filing Code: SS-529. Producer or source: Thyssen Specialty Steels Inc..

AISI Type 321 is a titanium stabilized 18-10 stainless steel having a maximum operating temperature of 1650 F. It is recommended for welded equipment and structures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-124. Producer or source: Stainless steel mills.

AISI Types 303 and 303 Se austenitic chromium nickel stainless steels to which elements have been added to improve machining and non-seizing characteristics. They are the most readily machinable of all the austenitic chromium nickel grades and are suitable for use in automatic screw machines. They are widely used to minimize seizing and galling. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-126. Producer or source: Stainless steel mills.

ALLEGHENY STAINLESS Type 405, unlike most other 12% chromium steels, is not subject to appreciable hardening through air cooling from high temperatures. This is an advantageous characteristic in those applications where a soft, ductile material is required after rapid cooling from above the critical temperature. The nonhardening tendency of Type 405 also retards the formation of hardening cracks where welding is employed. Its uses include annealing boxes and baffles where hardening during cooling would be undesirable. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as heat treating and machining. Filing Code: SS-461. Producer or source: Allegheny Ludlum Corporation.

ARMCO 17-10P is an austenitic stainless steel that responds favorably to an age-hardening heat treatment. It is recommended for use in applications requiring high strength with low magnetic permeability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-69. Producer or source: Armco Inc., Eastern Steel Division.

CRUCIBLE 17Cr-4Ni SUPER-X is a precipitation-hardening martensitic stainless steel which develops high strength and hardness after relatively simple heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-521. Producer or source: Crucible Specialty Metals Division, Colt Industries.

FANSTEEL 291 METAL is a columbium-base alloy that can be readily fabricated, machined and welded. It is used in the high-temperature range 2800-3500 F where excellent strength-to-weight ratio can be used to advantage. It is also used in the lower temperature range 2000-2700 F because of its availability and fabricability which may be of more importance than high strength alone. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cb-20. Producer or source: Fansteel Metallurgical Corporation.

Boehler A965 is a superaustenitic Cr-Ni-Mo stainless steel with excellent resistance to stress-corrosion cracking, pitting, and crevice corrosion. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-994. Producer or source: Böhler-Uddeholm Specialty Metals Inc.

UNILOY 434 is a medium-chromium (17%), non-hardening, ferritic stainless steel containing an addition of molybdenum (nominally 1%). The molybdenum addition creates a grade with increased resistance to corrosion. This steel (when compared with the molybdenum-free grade, AISI Type 430 or Uniloy 430) shows improved resistance to pitting attack from various de-icing chemicals. In addition, the color of Uniloy 434, when buffed, closely resembles that of bright chromium plate. Hence a popular application for Uniloy 434 is automotive trim. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-422. Producer or source: Cyclops Cytemp.

CARPENTER GREEK ASCOLOY is a quench-hardenable chromium-nickel-tungsten stainless steel designed for temperatures up to 1200 F (649 C) in highly stressed parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-70. Producer or source: Carpenter. Originally published as Carpenter AMS 5616, February 1958, revised August 1988.

Type CF-8C is an iron-chromium-nickel-columbium corrosion resistant casting alloy especially useful for field welding, or for service involving long exposure to elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: SS-235. Producer or source: Stainless steel foundries.