PYROMET 90

ARMCO 400 is a low-chromium (low-cost) non-hardenable ferritic stainless steel with relatively high corrosion and oxidation resistance and good fabricating characteristics: This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: SS-250. Producer or source: Armco Steel Corporation, Advanced Materials Division.

PYROMET 901 is a nickel-chromium super alloy designed for high strength and corrosion resistance in the temperature range of 1000-1400 F. Compounds of Ni3 (Al, Ti) type produce the precipitation hardening. It is used in a variety of high-temperature applications such as components in aircraft and gas turbines. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-216. Producer or source: Carpenter Technology Corporation.

AISI Type 204 is a chromium-nickel-manganese type stainless steel comparable in properties to Type 304 stainless steel. It is austenitic, non-magnetic, and highly corrosion resistant. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-163. Producer or source: Stainless steel mills.

MISCO-C is a 29% Cr-9% Ni type casting alloy having high corrosion and heat resistance. It is a type CE-30 stainless steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and joining. Filing Code: SS-15. Producer or source: Michigan Steel Casting Company, Alloy Casting Division. Originally published June 1954, revised April 1965.

FIRTH-VICKERS 448 is a ferritic type stainless steel having high oxidation resistance and strength at elevated temperatures. It has good creep resistance in the range 1020 to 1200 deg. F. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep, deformation, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-51. Producer or source: Firth-Vickers Stainless Steels Ltd.

CORONZE Alloy 638 is a cobalt-silicon modified aluminum bronze with very high strength, good fatigue properties, good corrosion and excellent stress corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-224. Producer or source: Olin Brass.

NIMONIC 110 is a highly alloyed nickel-base alloy having high creep and oxidation resistance. It is recommended for aircraft gas turbine components to resist the stresses at the very high temperatures of operation. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-128. Producer or source: Henry Wiggin & Company Ltd.

BERYLCO NICKEL ALLOY 440 is an age-hardenable nickel-beryllium-titanium alloy that offers high strength, excellent spring properties outstanding formability, good high-temperature mechanical properties, and resistance to corrosion and fatigue. Complex shapes can be produced in the solution-treated (soft) condition and then aged to a minimum tensile strength of 215,500 psi. It is used for mechanical and electrical/electronic components in the temperature range -320 to 800 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-94. Producer or source: Kawecki Berylco Industries Inc.. Originally published September 1964, revised September 1975.

REMANIT 4565S is a fully austenitic stainless steel which features both high strength and excellent corrosion resistance in a wide range of corrosive media. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming and heat treating. Filing Code: SS-529. Producer or source: Thyssen Specialty Steels Inc..

AISI No. 651 is an austenitic iron-base superalloy with a relatively high ratio of strength to alloying element content. It is capable of withstanding high static and dynamic stresses through at least 1200 F. It is used for various high-temperature applications such as components for jet engines, gas turbines, turbochargers and missiles. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-478. Producer or source: Stainless steel mills.

INCONEL Alloy 617 is a solid solution nickel-chromium-cobalt-molybdenum alloy having excellent high-temperature strength and oxidation resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-179. Producer or source: Huntington Alloy Products Division, An INCO Company.

FANSTEEL 291 METAL is a columbium-base alloy that can be readily fabricated, machined and welded. It is used in the high-temperature range 2800-3500 F where excellent strength-to-weight ratio can be used to advantage. It is also used in the lower temperature range 2000-2700 F because of its availability and fabricability which may be of more importance than high strength alone. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cb-20. Producer or source: Fansteel Metallurgical Corporation.

RMI 8A1-1Mo-1V is an alpha-beta titanium alloy with a tensile strength of 135,000 psi in the mill-annealed condition. It has an excellent combination of tensile strength and creep resistance that makes it suitable for service to 1000 F. It is recommended for aircraft and jet-engine parts requiring high strength with superior creep resistance and toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Ti-84. Producer or source: RMI Company.

Ti-4A1-3Mo-IV is an alpha-beta type titanium alloy having a good combination of high strength, creep and stability at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear, bearing, and bend strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-26. Producer or source: Titanium Metals Corporation of America.

Sumitomo HR11N is a high temperature nickel alloy with a high chromium content to provide excellent corrosion and oxidation resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming and joining. Filing Code: Ni-718. Producer or source: Sumitomo Metal USA Corporation.