Re-Scheduling IoT Services in Edge Networks

Nowadays, with the rapid development of hardware and network technologies, various types of smart devices are released by different vendors, resulting in the emergence of Internet of Things (IoT). However, most of the existing approaches for IoT device management are designed in a centralized way, whose efficiency meets challenges recently because of the large scale of heterogeneous device modules and highly dynamic essence of the networks. To tackle this challenge, we propose a distributed approach for IoT device management and service composition from a social network point of view. Specifically, we introduce Restful web service to encapsulate heterogeneous IoT device modules, providing uniform interfaces for IoT service invocation. According to the relationships between IoT devices, social network theory is applied to model IoT services in different dimensions. After fully considering the social properties, a flexible and scalable schemes for IoT service composition is designed to satisfactorily meet users' requirements from several aspects. Finally, simulation experiments based on dataset from reality are conducted to validate the effectiveness of our approach.

SummaryRecently, the deployment of novel smart network concepts, such as the Internet of things (IoT) or machine‐to‐machine communication, has gained more attention owing to its role in providing communication among various smart devices. The IoT involves a set of IoT devices (IoTDs) such as actuators and sensors that communicate with IoT applications via IoT gateways without human intervention. The IoTDs have different traffic types with various delay requirements, and we can classify them into two main groups: critical and massive IoTDs. The fundamental promising technology in the IoT is the advanced long‐term evolution (LTE‐A). In the future, the number of IoTDs attempting to access an LTE‐A network in a short period will increase rapidly and, thus, significantly reduce the performance of the LTE‐A network and affect the QoS required by variant IoT traffic. Therefore, efficient resource allocation is required.In this paper, we propose a priority‐based allocation scheme for multiclass service in IoT to efficiently share resources between critical and massive IoTD traffic based on their specific characteristics while protecting the critical IoTDs, which have a higher priority over the massive IoTDs. The performance of the proposed scheme is analyzed using the Geo/G/1 queuing system focusing on QoS guarantees and resource utilization of both critical and massive IoTDs. The distribution of service time of the proposed system is determined and, thus, the average waiting and service times are derived. The results indicate that the performance of the massive IoTDs depends on the data traffic characteristics of the critical IoTDs. Furthermore, the results emphasize the importance of the system delay analysis and demonstrate its effects on IoT configurations.

Due to the rapid growth of the Internet of Things (IoT), researchers have demonstrated various IoT solutions, which are used to interconnect a wide range of IoT devices through the Internet. However, IoT stumbled into vertical silos; the available solutions provide specific IoT infrastructure, devices, protocols, data formats and models. This diversity and heterogeneity lead to interoperability issues. Heterogeneity happens at all IoT layers, especially at the application layer; devices often adopt mutually incompatible application-layer communication protocols to connect devices to IoT services. Furthermore, in order to integrate semantics to raw data, each system uses its one domain-specific ontology to make data more understandable and interpretable by adding semantic annotations. Working in isolation reduces the interoperability among IoT devices and systems, things across domains need to internetwork and collaborate to provide high level IoT services. Therefore, to alleviate the problem of both communication protocol interoperability and semantic interoperability across vertical silos of systems at the application layer, this paper proposes a semantic gateway (SGIoT) that acts as a bridge between heterogeneous sink nodes at the physical level and IoT services. SGIoT enables interconnectivity between communication protocols such as CoAP and MQTT regardless of their communication model, meanwhile it enables semantics integration throu gh cross-domain ontology (CDOnto) for semantic annotation, in order to provide interpretation of messages among IoT applications across domains. Our approach focuses on modularity and extensibility.

Pricing Models for the Internet of Things (IoT): Game Perspectives

ABSTRACTIn recent years, the emerging development of Internet of things (IoT) has created new opportunities for IoT service provider, device manufacturer and customer (end user). In agriculture, employing IoT can help reducing manpower as well as standardizing agricultural processes, thus increasing the benefit for customer who does agricultural business. Beside the opportunities, there are also issues while doing maintenance for an agricultural IoT system. One of them is how to automate the process to detect faults of IoT devices in a large deployment area. While previous studies focus on investigating algorithms as well as theoretical model to detect faults for specific IoT devices, automatically expanding of IoT management process for detecting faults of sensor/actuator has not been investigated yet. To achieve this, we should be able to deal with the relationship between IoT device manufacturer, service provider and customer. In this study, we conceptualize the knowledge of IoT devices, management process and fault detection requirement. To realize this model, we introduce a runtime system to expand the IoT management process for detecting sensor/actuator faults which is able to provide the above features. We do several experiments to show the effectiveness and usefulness of the proposed solution.

<title>Abstract</title> The Internet of Things (IoT) services have seen rapid growth in recent years. However, existing research has yet to propose a robust method for quantitatively evaluating IoT services, nor has it adequately addressed the impact of cooperation and competition among IoT service providers on pricing strategies. This paper develops a duopolistic Cournot competition model involving data providers, service providers, and consumers. IoT service providers leverage machine learning to train models that generate user-centric IoT services, which they can then market and monetize for profit. We introduce a Logistic-curved service-quality function, with the amount of data used for machine learning as the primary metric for IoT service quality. The competitive behavior between IoT service providers in a Cournot duopoly market is examined, and we derive the optimal IoT service pricing and data procurement strategies that maximize profits for both parties. Next, we explore the possibility of bundling IoT services at discounted prices, categorizing four distinct scenarios based on the relationship between service quality and pricing. We calculate the pricing of IoT service bundles and determine the optimal data purchase quantities for both providers to maximize their profits. Finally, we incorporate a price-fluctuation factor to account for market uncertainty, refining the profit-function model to better reflect real-world market dynamics. The research can provide decision-making references for IoT service pricing, and the pricing mechanism based on machine learning can effectively mitigate the biases caused by price fluctuations.

The deployment of a client–server-based distributed intelligent system involves application development in both the network domain and the device domain. In the network domain, an application server (typically in the cloud) is deployed to execute the network applications. In the device domain, several Internet of Things (IoT) devices may be configured as, for example, wireless sensor networks (WSNs), and interact with each other through the application server. Developing the network and the device applications are tedious tasks that are the major costs for building a distributed intelligent system. To resolve this issue, a low-code or no-code (LCNC) approach has been purposed to automate code generation. As traditional LCNC solutions are highly generic, they tend to generate excess code and instructions, which will lack efficiency in terms of storage and processing. Fortunately, optimization of automated code generation can be achieved for IoT by taking advantage of the IoT characteristics. An IoT-based distributed intelligent system consists of the device domain (IoT devices) and the network domain (IoT server). The software of an IoT device in the device domain consists of the Device Application (DA) and the Sensor Application (SA). Most IoT LCNC approaches provide code generation in the network domain. Very few approaches automatically generate the DA code. To our knowledge, no approach supports the SA code generation. In this paper, we propose DeviceTalk, an LCNC environment for the DA and the SA code development. DeviceTalk automatically generates the code for IoT devices to speed up the software development in the device domain for a distributed intelligent system. We propose the DeviceTalk architecture, design and implementation of the code generation mechanism for the IoT devices. Then, we show how a developer can use the DeviceTalk Graphical User Interface (GUI) to exercise LCNC development of the device software.

Worldwide, Internet of Things (IoT) devices will surpass a range of five billion by 2025 and developed countries will extend to advance by supplying almost two-thirds of such connections. With existing infrastructure, allocating bandwidth to billions of IoT devices is going to be cumbersome. This paper addresses the problem of Dynamic bandwidth allocation in IoT devices. We enhanced the dynamic bandwidth allocation algorithms to support QoS in different bandwidth ranges. Our Proposed innovative Machine learning-based Intelligent Dynamic Bandwidth Allocation (IDBA) algorithm allocates the bandwidth effectively between IoT devices based on utilization patterns observed through machine learning methods. Moreover, we showed that an IDBA algorithm results in supporting quality of service in terms of ensuring uninterrupted bandwidth to critical IoT application where bandwidth tolerance is zero percent, along with that IDBA increasing the network throughput correlated to other dynamic bandwidth allocation algorithms. We demonstrate simulations in different applications. The results show that IDBA achieves better throughput even in low bandwidth range.

The Internet of Things (IoT) enabled technologies to have proliferated due to their abilities to capture and exchange quality information. This empirical study aims to investigate the factors influencing the intention to use IoT services in healthcare by young physicians. An integrated model based on the theory of planned behaviour (TPB) and diffusion of innovations (DOI) theories are drawn upon and analyzed through a Structural Equation Modelling (SEM) with importance-performance map analysis (IPMA). Data were collected through a structured survey questionnaire. The results indicated that behavioural intention to use IoT in healthcare services vastly affected by the attitude and value co-creation. Attitude was found to be a principal determinant followed by the relative advantage towards behavioural intention to use IoT services. The novelty of this empirical study is that the proposed integrated model provides a meaningful application of the young physicians’ intention to use IoT in healthcare in developing countries.

The Internet of Things (IoT) represents a cutting-edge technical domain, encompassing billions of intelligent objects capable of bridging the physical and virtual worlds across various locations. IoT services are responsible for delivering essential functionalities. In this dynamic and interconnected IoT landscape, providing high-quality services is paramount to enhancing user experiences and optimizing system efficiency. Service composition techniques come into play to address user requests in IoT applications, allowing various IoT services to collaborate seamlessly. Considering the resource limitations of IoT devices, they often leverage cloud infrastructures to overcome technological constraints, benefiting from unlimited resources and capabilities. Moreover, the emergence of fog computing has gained prominence, facilitating IoT application processing in edge networks closer to IoT sensors and effectively reducing delays inherent in cloud data centers. In this context, our study proposes a cloud-/fog-based service composition for IoT, introducing a novel fuzzy-based hybrid algorithm. This algorithm ingeniously combines Ant Colony Optimization (ACO) and Artificial Bee Colony (ABC) optimization algorithms, taking into account energy consumption and Quality of Service (QoS) factors during the service selection process. By leveraging this fuzzy-based hybrid algorithm, our approach aims to revolutionize service composition in IoT environments by empowering intelligent decision-making capabilities and ensuring optimal user satisfaction. Our experimental results demonstrate the effectiveness of the proposed strategy in successfully fulfilling service composition requests by identifying suitable services. When compared to recently introduced methods, our hybrid approach yields significant benefits. On average, it reduces energy consumption by 17.11%, enhances availability and reliability by 8.27% and 4.52%, respectively, and improves the average cost by 21.56%.

Internet of Things (IoT) services have grown substantially in recent years. Consequently, IoT service providers (SPs) are emerging in the market and competing to offer their services. Many IoT applications utilize these services in an integrated manner with different Quality-of-Service (QoS) requirements. Thus, the provisioning of end-to-end QoS is getting more indispensable for IoT platforms. However, provisioning the system by using only QoS metrics without considering user experiences is not sufficient. Recently, Quality of Experience (QoE) model has become a promising approach to quantify actual user experiences of services. A holistic design approach that considers constraints of various QoS/QoE metrics together is needed to satisfy requirements of these applications and services. Besides, IoT services may operate in environments with limited resources. Therefore, effective management of services and system resources is essential for QoS/QoE support. This paper provides a comprehensive survey for the state-of-the-art studies on IoT services with QoS/QoE perspective. Our contributions are threefold: (1) QoE-driven architecture is demonstrated by classifying vital components according to QoE-related functions in prior studies, (2) QoE metrics and QoE optimization objectives are classified by corresponding system and resource control problems in the architecture, and (3) QoE-aware resource management e.g., QoE-aware offloading, placement and data caching policies with recent Machine Learning approaches are extensively reviewed.

SummaryWith the development of Internet of Things (IoT)‐related technologies and artificial intelligence (AI) technologies, various IoT services are becoming more intelligent, and their use range is increasing and diversifying. IoT hardware and IoT software must support AI‐related functions to provide an intelligent IoT service. In general, IoT devices powered by batteries have limited computing performance when compared to general computing environments. Therefore, it is essential to provide AI‐related functions at low power in IoT devices to implement and offer various intelligent services. Neuromorphic computing devices or neuromorphic computing architectures can operate with low power energy consumption. If applied to IoT devices, AI‐related functions can be implemented in a resource‐constrained IoT device environment. The proposed neuromorphic architecture abstraction (NAA) model dynamically selects the proper neuromorphic architecture by comparing the parameter size of a given SNN model. It also considers the specifications and error probability of the available neuromorphic architecture. We also implement the proposed model in a real IoT computing environment and show that the proposed NAA model and dynamic selection scheme can reduce the execution time for training and inferencing. It reduces the training and inferencing time of a given model compared with the method of randomly specifying the neuromorphic architecture.

5G network is considered as a key enabler in meeting continuously increasing demands for the future Internet of Things (IoT) services, including high data rate, numerous devices connection, and low service latency. To satisfy these demands, network slicing and fog computing have been envisioned as the promising solutions in service-oriented 5G architecture. However, security paradigms enabling authentication and confidentiality of 5G communications for IoT services remain elusive, but indispensable. In this paper, we propose an efficient and secure service-oriented authentication framework supporting network slicing and fog computing for 5G-enabled IoT services. Specifically, users can efficiently establish connections with 5G core network and anonymously access IoT services under their delegation through proper network slices of 5G infrastructure selected by fog nodes based on the slice/service types of accessing services. The privacy-preserving slice selection mechanism is introduced to preserve both configured slice types and accessing service types of users. In addition, session keys are negotiated among users, local fogs and IoT servers to guarantee secure access of service data in fog cache and remote servers with low latency. We evaluate the performance of the proposed framework through simulations to demonstrate its efficiency and feasibility under 5G infrastructure.

Billions of devices in the Internet of Things (IoT) collect sensitive data about people, creating data privacy risks and breach vulnerabilities. Accordingly, data privacy preservation is vital for sustaining the proliferation of IoT services. In particular, privacy-preserving IoT connects devices embedded with sensors and maintains the data privacy of people. However, common misconceptions exist among IoT researchers, service providers, and users about privacy-preserving IoT. This article refutes five common misconceptions about privacy-preserving IoT concerning data sensing and innovation, regulations, and privacy safeguards. For example, IoT users have a common misconception that no data collection is permitted in data privacy regulations. On the other hand, IoT service providers often think data privacy impedes IoT sensing and innovation. Addressing these misconceptions is essential for making progress in privacy-preserving IoT. This article refutes such common misconceptions using real-world experiments and online survey research. First, the experiments indicate that data privacy should not be perceived as an impediment in IoT but as an opportunity to increase customer retention and trust. Second, privacy-preserving IoT is not exclusively a regulatory problem but also a functional necessity that must be incorporated in the early stages of any IoT design. Third, people do not trust services that lack sufficient privacy measures. Fourth, conventional data security principles do not guarantee data privacy protection, and data privacy can be exposed even if data is securely stored. Fifth, IoT decentralization does not attain absolute privacy preservation.

Remote attestation is a security technique through which a remote trusted party (i.e., Verifier) checks the trust-worthiness of a potentially untrusted device (i.e., Prover). In the Internet of Things (IoT) systems, the existing remote attestation protocols propose various approaches to detect the modified software and physical tampering attacks. However, in an inter-operable IoT system, in which IoT devices interact autonomously among themselves, an additional problem arises: a compromised IoT service can influence the genuine operation of other invoked service, without changing the software of the latter. In this paper, we propose a protocol for Remote Attestation of Distributed IoT Services (RADIS), which verifies the trust-worthiness of distributed IoT services. Instead of attesting the complete memory content of the entire interoperable IoT devices, RADIS attests only the services involved in performing a certain functionality. RADIS relies on a control-flow attestation technique to detect IoT services that perform an unexpected operation due to their interactions with a malicious remote service. Our experiments show the effectiveness of our protocol in validating the integrity status of a distributed IoT service.