Performance evaluation of a priority‐based resource allocation scheme for multiclass services in IoT

Due to the rapid growth of the Internet of Things (IoT), researchers have demonstrated various IoT solutions, which are used to interconnect a wide range of IoT devices through the Internet. However, IoT stumbled into vertical silos; the available solutions provide specific IoT infrastructure, devices, protocols, data formats and models. This diversity and heterogeneity lead to interoperability issues. Heterogeneity happens at all IoT layers, especially at the application layer; devices often adopt mutually incompatible application-layer communication protocols to connect devices to IoT services. Furthermore, in order to integrate semantics to raw data, each system uses its one domain-specific ontology to make data more understandable and interpretable by adding semantic annotations. Working in isolation reduces the interoperability among IoT devices and systems, things across domains need to internetwork and collaborate to provide high level IoT services. Therefore, to alleviate the problem of both communication protocol interoperability and semantic interoperability across vertical silos of systems at the application layer, this paper proposes a semantic gateway (SGIoT) that acts as a bridge between heterogeneous sink nodes at the physical level and IoT services. SGIoT enables interconnectivity between communication protocols such as CoAP and MQTT regardless of their communication model, meanwhile it enables semantics integration throu gh cross-domain ontology (CDOnto) for semantic annotation, in order to provide interpretation of messages among IoT applications across domains. Our approach focuses on modularity and extensibility.

ABSTRACTIn recent years, the emerging development of Internet of things (IoT) has created new opportunities for IoT service provider, device manufacturer and customer (end user). In agriculture, employing IoT can help reducing manpower as well as standardizing agricultural processes, thus increasing the benefit for customer who does agricultural business. Beside the opportunities, there are also issues while doing maintenance for an agricultural IoT system. One of them is how to automate the process to detect faults of IoT devices in a large deployment area. While previous studies focus on investigating algorithms as well as theoretical model to detect faults for specific IoT devices, automatically expanding of IoT management process for detecting faults of sensor/actuator has not been investigated yet. To achieve this, we should be able to deal with the relationship between IoT device manufacturer, service provider and customer. In this study, we conceptualize the knowledge of IoT devices, management process and fault detection requirement. To realize this model, we introduce a runtime system to expand the IoT management process for detecting sensor/actuator faults which is able to provide the above features. We do several experiments to show the effectiveness and usefulness of the proposed solution.

Worldwide, Internet of Things (IoT) devices will surpass a range of five billion by 2025 and developed countries will extend to advance by supplying almost two-thirds of such connections. With existing infrastructure, allocating bandwidth to billions of IoT devices is going to be cumbersome. This paper addresses the problem of Dynamic bandwidth allocation in IoT devices. We enhanced the dynamic bandwidth allocation algorithms to support QoS in different bandwidth ranges. Our Proposed innovative Machine learning-based Intelligent Dynamic Bandwidth Allocation (IDBA) algorithm allocates the bandwidth effectively between IoT devices based on utilization patterns observed through machine learning methods. Moreover, we showed that an IDBA algorithm results in supporting quality of service in terms of ensuring uninterrupted bandwidth to critical IoT application where bandwidth tolerance is zero percent, along with that IDBA increasing the network throughput correlated to other dynamic bandwidth allocation algorithms. We demonstrate simulations in different applications. The results show that IDBA achieves better throughput even in low bandwidth range.

The deployment of a client–server-based distributed intelligent system involves application development in both the network domain and the device domain. In the network domain, an application server (typically in the cloud) is deployed to execute the network applications. In the device domain, several Internet of Things (IoT) devices may be configured as, for example, wireless sensor networks (WSNs), and interact with each other through the application server. Developing the network and the device applications are tedious tasks that are the major costs for building a distributed intelligent system. To resolve this issue, a low-code or no-code (LCNC) approach has been purposed to automate code generation. As traditional LCNC solutions are highly generic, they tend to generate excess code and instructions, which will lack efficiency in terms of storage and processing. Fortunately, optimization of automated code generation can be achieved for IoT by taking advantage of the IoT characteristics. An IoT-based distributed intelligent system consists of the device domain (IoT devices) and the network domain (IoT server). The software of an IoT device in the device domain consists of the Device Application (DA) and the Sensor Application (SA). Most IoT LCNC approaches provide code generation in the network domain. Very few approaches automatically generate the DA code. To our knowledge, no approach supports the SA code generation. In this paper, we propose DeviceTalk, an LCNC environment for the DA and the SA code development. DeviceTalk automatically generates the code for IoT devices to speed up the software development in the device domain for a distributed intelligent system. We propose the DeviceTalk architecture, design and implementation of the code generation mechanism for the IoT devices. Then, we show how a developer can use the DeviceTalk Graphical User Interface (GUI) to exercise LCNC development of the device software.

With the explosive growth of the Internet of Things (IoT) devices deployed in edge networks, the functionalities of IoT devices are typically encapsulated as IoT services, and user requests can be achieved through the composition of data and/or computation-intensive IoT services. Considering the prediction-uncertainty of forthcoming requests, certain IoT services may (i) not be hosted currently by appropriate IoT devices, or (ii) such an IoT service exists, but its non-functional properties may hardly be satisfied with respect to certain constraints prescribed by requests. To address this challenge, this paper proposes an efficiency-aware service Migration Scheduling (denoted eMS) mechanism in edge networks, in order to migrate IoT services on-demand, and thus, to optimally settle non-satisfiable constraints. Specifically, IoT services are re-scheduled, such that certain IoT services are migrated from their hosting IoT devices to neighboring ones, while minimizing the energy consumption and average delay caused by this service re-scheduling operation. We formulate this service re-scheduling as a multi-objective and multi-constraint optimization problem, which is solved through integrating the greedy algorithm into the fast non-dominated sorting and crowded-comparison operators as the hybrid genetic algorithm (G-NSGA-II). Based on real-life datasets provided by an oil pipeline monitoring project, extensive experiments are conducted, and evaluation results show that our eMS is promising in reducing the energy consumption and average delay of service re-scheduling in comparison with the state-of-art’s techniques.

With the advancement of 5G mobile telecommunication, various IoT (Internet of Things) devices communicate massive amounts of data by being connected to wireless networks. Since this wireless communication is vulnerable to hackers via data leakage during communication, the transmitted data should be encrypted through block ciphers to protect the data during communication. In addition, in order to encrypt the massive amounts of data securely, it is essential to apply one of secure mode of operation. Among them, CTR (CounTeR) mode is the most widely used in industrial applications. However, these IoT devices have limited resources of computing and memory compared to typical computers, so that it is challenging to process cryptographic algorithms that have computation-intensive tasks in IoT devices at high speed. Thus, it is required that cryptographic algorithms are optimized in IoT devices. In other words, optimizing cryptographic operations on these IoT devices is not only basic but also an essential effort in order to build secure IoT-based service systems. For efficient encryption on IoT devices, even though several ARX (Add-Rotate-XOR)-based ciphers have been proposed, it still necessary to improve the performance of encryption for smooth and secure IoT services. In this article, we propose the first parallel implementations of CTR mode of ARX-based ciphers: LEA (Lightweight Encryption Algorithm), HIGHT (high security and light weight), and revised CHAM on the ARMv8 platform, a popular microcontroller in various IoT applications. For the parallel implementation, we propose an efficient data parallelism technique and register scheduling, which maximizes the usage of vector registers. Through proposed techniques, we process the maximum amount of encryption simultaneously by utilizing all vector registers. Namely, in the case of HIGHT and revised CHAM-64/128 (resp. LEA, revised CHAM-128/128, and CHAM-128/256), we can execute 48 (resp. 24) encryptions simultaneously. In addition, we optimize the process of CTR mode by pre-computing and using the intermediate value of some initial rounds by utilizing the property that the nonce part of CTR mode input is fixed during encryptions. Through the pre-computation table, CTR mode is optimized up until round 4 in LEA, round 5 in HIGHT, and round 7 in revised CHAM. With the proposed parallel processing technique, our software provides 3.09%, 5.26%, and 9.52% of improved performance in LEA, HIGHT, and revised CHAM-64/128, respectively, compared to the existing parallel works in ARM-based MCU. Furthermore, with the proposed CTR mode optimization technique, our software provides the most improved performance with 8.76%, 8.62%, and 15.87% in LEA-CTR, HIGHT-CTR, and revised CHAM-CTR, respectively. This work is the fastest implementation of CTR mode on ARMv8 architecture to the best of our knowledge.

As location-aware IoT (Internet of Things) devices intend to spread across almost every application, IoT devices are going to require different GNSS (Global Navigation Satellite System) receiver design requirements. To deliver on IoT opportunities, system architects and designers need to look carefully at every aspect of system design and architecture to be able to enable the full potential of the IoT era. IoT devices are equipped with different connectivity sensors that can provide a reliable integrated location-awareness solution. IoT devices are mainly relying on GNSS chip to deliver a service when no other RF signal is available. Hence, GNSS chip is expected to maintain a robust and reliable performance even in harsh environment. The harsh environment includes multipath environment, NLOS (Non-Line of Sight) GNSS signal reception, weak GNSS signal power reception, superimposed motion (e.g., arm swing, floating platform fluctuation …etc.), operation under freezing temperature, and interference. The targeted low-cost system design along with the expected harsh operational environment derived us to face exceptional GNSS signal reception condition. This paper discusses lessons learned, and challenges faced signal acquisition, reacquisition, and tracking for several IoT applications. Different operational modes are also explored to accommodate various use cases scenarios for several IoT applications. These different power consumption operational modes allow the GNSS chip to achieve an Ultra-low power consumption which indeed required for IoT applications. This paper provides an overview about the addressed GNSS chip fabricated in a 28nm FD-SOI process. We demonstrate a system performance and power consumption comparison of this chip along with other state-of-the-art GNSS chip. We compare the positioning performance for this device alongside another state-of-the-art GNSS modules and Novatel’s tightly coupled GNSS/INS (Inertial Navigation System) reference solution at numerous scenarios ranging from walking, running, and driving at several sites under different environment.

Nowadays, with the rapid development of hardware and network technologies, various types of smart devices are released by different vendors, resulting in the emergence of Internet of Things (IoT). However, most of the existing approaches for IoT device management are designed in a centralized way, whose efficiency meets challenges recently because of the large scale of heterogeneous device modules and highly dynamic essence of the networks. To tackle this challenge, we propose a distributed approach for IoT device management and service composition from a social network point of view. Specifically, we introduce Restful web service to encapsulate heterogeneous IoT device modules, providing uniform interfaces for IoT service invocation. According to the relationships between IoT devices, social network theory is applied to model IoT services in different dimensions. After fully considering the social properties, a flexible and scalable schemes for IoT service composition is designed to satisfactorily meet users' requirements from several aspects. Finally, simulation experiments based on dataset from reality are conducted to validate the effectiveness of our approach.

Trust is an invisible behavior of any entity. An entity could be a living being or a cyber-physical system. The Internet of Things (IoT) is a connected network of smart objects or things where trusted relationships are crucial. Trust in an entity can increase or decrease based on different parameters and properties of the specific entity. Trusted relationships can dynamically reach based on contextual data collected over time. The heterogeneous behavior of IoT devices makes trust measurement more difficult. The massive deployment of IoT devices and related innovative IoT applications leads to exploring new trust management frameworks for the IoT paradigm. Emerging IoT applications need to trust entities deployed by third-party providers. Innovative external IoT applications need to be dynamically trusted by the IoT devices and IoT gateways. Dynamic trust achievement is a complex process when an entity is new within the network. In this article, we have defined the trust management for IoT and discussed the need for trusted architecture for dynamic IoT infrastructure, and elaborated the requirements of trust management policies. We have also heightened the need for decentralized architecture for trust management for the Internet of Things (IoT). A new edge-centric multi-agent-based dynamic and decentralized trust management model is proposed and simulated to solve the aforementioned issues. The results of this work are useful for further research in the field of trust management for IoT.

Pricing Models for the Internet of Things (IoT): Game Perspectives

Big data and artificial intelligence based early risk warning system of fire hazard for smart cities

At the current pace of technological advancement, it is evident that IoT (Internet of Things) devices are becoming an inevitable part of daily life. Since the growth rate is exceptional, this situation has led to an alarming rise in concern for security threats and issues in the IoT devices. The purpose of this study is to introduce a novel and well-structured threat-modeling approach which is specifically tailored for IoT devices. Traditional threat models like STRIDE, LINDDUN, CORAS, etc., are effective in software applications. However, these models do not cover every aspect of threats specific to IoT devices. The proposed approach consists of a seven-step threat-modeling process. This methodology also addresses aspects of IoT devices which directly affect the user: Privacy threats; Safety threats; and Malfunction threats (PSM). The mentioned threats cannot be addressed effectively with existing traditional threat-modeling approaches. The proposed threat modeling has been applied to three IoT applications: IoT-based smart home environments; IoT-based garment units; and IoT-based water quality management systems, in order to demonstrate the work’s effectiveness. It was seen that when coupling the proposed methodology with the PSM technique and existing threat modeling methods, threats directly affecting users were also identified. This method increases the performance and effectiveness of threat modeling, which leads to increased mitigation of the identified threats. This also leads to an increase in the security of the devices and environment. The final part of the study presents practical mitigation techniques to eliminate threats in IoT devices.

As the usage growth rate of Internet of Things (IoT) devices is increasing, various issues related to these devices need attention. One of them is the distribution of the IoT firmware update. The IoT devices’ software development does not end when the manufacturer sells the devices to the market. It still needs to be kept updated to prevent cyber-attacks. The commonly used firmware update process, over-the-air (OTA), mostly happens in a centralized way, in which the IoT devices directly download the firmware update from the manufacturer’s server. This central architecture makes the manufacturer’s server vulnerable to single-point-of-failure and latency issues that can delay critical patches from being applied to vulnerable devices. The Open Connectivity Foundation (OCF) is one organization contributing to providing interoperability services for IoT devices. In one of their subject areas, they provide a firmware update protocol for IoT devices. However, their firmware update process does not ensure the integrity and security of the patches. In this paper, we propose a blockchain-based OCF firmware update for IoT devices. Specifically, we introduce two types of firmware update protocol, direct and peer-to-peer updates, integrated into OCF firmware update specifications. In the direct scenario, the device, through the IoT gateway, can download the new firmware update from the manufacturer’s server. Meanwhile, in the peer-to-peer scheme, the device can query the update from the nearby gateways. We implemented our protocol using Raspberry Pi hardware and Ethereum-based blockchain with the smart contracts to record metadata of the manufacturer’s firmware updates. We evaluated the proposed system’s performance by measuring the average throughput, the latency, and the firmware update distribution’s duration. The analysis results indicate that our proposal can deliver firmware updates in a reasonable duration, with the peer-to-peer version having a faster completion time than the direct one.

With the emerging Internet of Things (IoT), distributed systems enter a new era. While pervasive and ubiquitous computing already became reality with the use of the cloud, IoT networks present new challenges because the ever growing number of IoT devices increases the latency of transferring data to central cloud data centers. Edge and fog computing represent practical solutions to counter the huge communication needs between IoT devices and the cloud. Considering the complexity and heterogeneity of edge and fog computing, however, resource provisioning remains the Achilles heel of efficiency for IoT applications. According to the importance of operating-system virtualization (so-called containerization), we propose an application-aware container scheduler that helps to orchestrate dynamic heterogeneous resources of edge and fog architectures. By considering available computational capacity, the proximity of computational resources to data producers and consumers, and the dynamic system status, our proposed scheduling mechanism selects the most adequate host to achieve the minimum response time for a given IoT service. We show how a hybrid use of containers and serverless microservices improves the performance of running IoT applications in fog-edge clouds and lowers usage fees. Moreover, our approach outperforms the scheduling mechanisms of Docker Swarm.

Internet of Things (IoT) applications are generally developed in a vertical manner, i.e., each IoT application is developed for a certain scenario which generally does not share data with IoT applications for recommendation services. This leads to an inefficient exploitation of other IoT service applications. In fact, such recommendation services can be achieved with the help of Social IoT (SIoT) by using data generated by various IoT applications. SIoT builds a profile of objects based on IoT applications data that can be exchanged with SIoT network for accessible to other IoT applications. In this manner, the SIoT network provides recommendation services for reusability of IoT applications' data among various IoT applications, as well as adapting IoT services according to users' needs which improve user experience. Additionally, the profiles built by a SIoT network can also help a single IoT application by looking for similar conditions that have been addressed in the past for the same IoT application. We propose a concept for exploiting the SIoT for recommendation services among various IoT applications with the help of a sample application scenario that highlights how the SIoT can help by providing recommendations. We also provide some implementation challenges for this concept.