Rethinking unsupervised domain adaptation for semantic segmentation

Accurate evaluation of orchard areas from remote sensing images is of great importance in economic and ecological aspects. In practice, the differences in distributions between remote sensing images and the lack of data labels make the semantic segmentation model impossible to use in new data. Unsupervised domain adaptation (UDA) methods can improve the performance of the model in the target domain by aligning the source domain and the target domain. However, due to the class mismatch problem and the interference of high-dimensional feature complexity, most UDA methods cannot achieve satisfactory results in orchard areas segmentation task. To address these issues, we propose an UDA model for orchard areas segmentation by developing a class feature aggregate discriminator. The class feature aggregate discriminator is designed to distinguish intra-domain classes and align inter-domain classes, and class feature aggregate can represent class information of different domains, which helps the model to avoid the interference of complex information. In addition, adversarial loss reweighting is introduced to the novel model, which makes the segmentation model pay more attention to the orchard areas. To verify the effectiveness of the proposed method, we conducted extensive experiments in three different remote sensing images around Yichang City. Compared to the baseline model, the proposed approach improves IoU by 27.68%, and we achieve high gains of 6.07% in IoU over other UDA methods. The larger gain indicates that our proposed method has great potential in cross-domain orchard areas segmentation.

Video domain adaptation for semantic segmentation using perceptual consistency matching

Contemporary domain generalization (DG) and multisource unsupervised domain adaptation (UDA) methods mostly collect data from multiple domains together for joint optimization. However, this centralized training paradigm poses a threat to data privacy and is not applicable when data are non-shared across domains. In this work, we propose a new approach called Collaborative Optimization and Aggregation (COPA), which aims at optimizing a generalized target model for decentralized DG and UDA, where data from different domains are non-shared and private. Our base model consists of a domain-invariant feature extractor and an ensemble of domain-specific classifiers. In an iterative learning process, we optimize a local model for each domain, and then centrally aggregate local feature extractors and assemble domain-specific classifiers to construct a generalized global model, without sharing data from different domains. To improve generalization of feature extractors, we employ hybrid batch-instance normalization and collaboration of frozen classifiers. For better decentralized UDA, we further introduce a prediction agreement mechanism to overcome local disparities towards central model aggregation. Extensive experiments on five DG and UDA benchmark datasets show that COPA is capable of achieving comparable performance against the state-of-the-art DG and UDA methods without the need for centralized data collection in model training.

Purpose To determine whether the unsupervised domain adaptation (UDA) method with generated images improves the performance of a supervised learning (SL) model for prostate cancer (PCa) detection using multisite biparametric (bp) MRI datasets. Materials and Methods This retrospective study included data from 5150 patients (14 191 samples) collected across nine different imaging centers. A novel UDA method using a unified generative model was developed for PCa detection using multisite bpMRI datasets. This method translates diffusion-weighted imaging (DWI) acquisitions, including apparent diffusion coefficient (ADC) and individual diffusion-weighted (DW) images acquired using various b values, to align with the style of images acquired using b values recommended by Prostate Imaging Reporting and Data System (PI-RADS) guidelines. The generated ADC and DW images replace the original images for PCa detection. An independent set of 1692 test cases (2393 samples) was used for evaluation. The area under the receiver operating characteristic curve (AUC) was used as the primary metric, and statistical analysis was performed via bootstrapping. Results For all test cases, the AUC values for baseline SL and UDA methods were 0.73 and 0.79 (P < .001), respectively, for PCa lesions with PI-RADS score of 3 or greater and 0.77 and 0.80 (P < .001) for lesions with PI-RADS scores of 4 or greater. In the 361 test cases under the most unfavorable image acquisition setting, the AUC values for baseline SL and UDA were 0.49 and 0.76 (P < .001) for lesions with PI-RADS scores of 3 or greater and 0.50 and 0.77 (P < .001) for lesions with PI-RADS scores of 4 or greater. Conclusion UDA with generated images improved the performance of SL methods in PCa lesion detection across multisite datasets with various b values, especially for images acquired with significant deviations from the PI-RADS-recommended DWI protocol (eg, with an extremely high b value). Keywords: Prostate Cancer Detection, Multisite, Unsupervised Domain Adaptation, Diffusion-weighted Imaging, b Value Supplemental material is available for this article. © RSNA, 2024.

With the rapid development of the remote sensing monitoring and computer vision technology, the deep learning method has made a great progress to achieve applications such as earth observation, climate change and even space exploration. However, the model trained on existing data cannot be directly used to handle the new remote sensing data, and labeling the new data is also time-consuming and labor-intensive. Unsupervised Domain Adaptation (UDA) is one of the solutions to the aforementioned problems of labeled data defined as the source domain and unlabeled data as the target domain, i.e., its essential purpose is to obtain a well-trained model and tackle the problem of data distribution discrepancy defined as the domain shift between the source and target domain. There are a lot of reviews that have elaborated on UDA methods based on natural data, but few of these studies take into consideration thorough remote sensing applications and contributions. Thus, in this paper, in order to explore the further progress and development of UDA methods in remote sensing, based on the analysis of the causes of domain shift, a comprehensive review is provided with a fine-grained taxonomy of UDA methods applied for remote sensing data, which includes Generative training, Adversarial training, Self-training and Hybrid training methods, to better assist scholars in understanding remote sensing data and further advance the development of methods. Moreover, remote sensing applications are introduced by a thorough dataset analysis. Meanwhile, we sort out definitions and methodology introductions of partial, open-set and multi-domain UDA, which are more pertinent to real-world remote sensing applications. We can draw the conclusion that UDA methods in the field of remote sensing data are carried out later than those applied in natural images, and due to the domain gap caused by appearance differences, most of methods focus on how to use generative training (GT) methods to improve the model’s performance. Finally, we describe the potential deficiencies and further in-depth insights of UDA in the field of remote sensing.

Sensors are devices that output signals for sensing physical phenomena and are widely used in all aspects of our social production activities. The continuous recording of physical parameters allows effective analysis of the operational status of the monitored system and prediction of unknown risks. Thanks to the development of deep learning, the ability to analyze temporal signals collected by sensors has been greatly improved. However, models trained in the source domain do not perform well in the target domain due to the presence of domain gaps. In recent years, many researchers have used deep unsupervised domain adaptation techniques to address the domain gap between signals collected by sensors in different scenarios, i.e., using labeled data in the source domain and unlabeled data in the target domain to improve the performance of models in the target domain. This survey first summarizes the background of recent research on unsupervised domain adaptation with time series sensor data, the types of sensors used, the domain gap between the source and target domains, and commonly used datasets. Then, the paper classifies and compares different unsupervised domain adaptation methods according to the way of adaptation and summarizes different adaptation settings based on the number of source and target domains. Finally, this survey discusses the challenges of the current research and provides an outlook on future work. This survey systematically reviews and summarizes recent research on unsupervised domain adaptation for time series sensor data to provide the reader with a systematic understanding of the field.

Unsupervised domain adaptation (UDA) is an important solution to reduce the bias between the labeled source domain and the unlabeled target domain. It has attracted more attention for optical remote sensing image scene classification and retrieval. Currently, most of the previous work is devoted to closed-set UDA. In fact, the target domain often contains unknown classes. Moreover, some open UDA methods mine structural information of the target domain directly from the type knowledge of the source domain, and less directly from the unlabeled data of the target domain. In this paper, we propose a new self-supervised-driven open-set UDA method combining contrastive self-supervised learning with consistency self-training for optical remote sensing scene classification and retrieval. Specifically, a contrastive self-supervised learning network is introduced to learn discriminative features from the unlabeled target domain data. Moreover, a novel open-set class learning module is developed based on two-level confidence rules and the consistency self-training strategy, which can obtain reliable unknown class samples for co-training. Finally, an open-set dataset including six cross-domain scenarios is constructed based on three public datasets and several experiments are conducted with eleven state-of-the-art domain adaptation methods. Experimental results demonstrate that our proposed method achieves superior performances on the six open-set cross-domain scenarios in both scene classification and retrieval. Especially, our method improves the overall classification accuracies by 9.72% to 24.06% and improve mean average retrieval precisions by 8.06% to 16.21% on the complex UCMD (source domain) → NWPU (target domain) scenario, compared with the other eleven state-of-the-art methods.

In unsupervised domain adaptation (UDA), a classifier for a target domain is trained with labeled source data and unlabeled target data. Existing UDA methods assume that the source data come from the same source domain (i.e., single-source scenario) or from multiple source domains, whose feature spaces have the same dimension ( <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">homogeneous</i> ) but different distributions (i.e., multihomogeneous-source scenario). However, in the real world, for a specific target domain, we probably have multiple different-dimension ( <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">heterogeneous</i> ) source domains, which do not satisfy the assumption of existing UDA methods. To remove this assumption and move forward to a realistic UDA problem, this article presents a shared-fuzzy-equivalence-relation neural network (SFERNN) for addressing the multisource heterogeneous UDA problem. The SFERNN is a five-layer neural network containing <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$c$</tex-math></inline-formula> source branches and one target branch. The network structure of the SFERNN is first confirmed by a novel fuzzy relation called multisource shared fuzzy equivalence relation. Then, we optimize parameters of the SFERNN via minimizing cross-entropy loss on <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$c$</tex-math></inline-formula> source branches and the distributional discrepancy between each source branch and the target branch. Experiments distributed across eight real-world datasets are conducted to validate the SFERNN. This testing regime demonstrates that the SFERNN outperforms the existing single-source heterogeneous UDA methods, especially when the target domain contains few data.

Bionic limb control through myoelectric pattern recognition, offering intuitive decoding of motor intent, can improve the quality of life for individuals with amputations. However, most work on pattern recognition only uses a small subset of the myoelectric data generated during daily life, to train an Artificial Neural Network (ANN) via Supervised Learning (SL). Scenarios substantially different from the recording session e.g. different limb positions, can lead to misclassifications by the ANN during everyday usage of the bionic limb. Recording labeled data from all scenarios encountered in daily life could alleviate the problem, but would be prohibitively time consuming. Unsupervised Domain Adaptation (UDA) offers a solution by leveraging unlabeled data from a <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">target domain</i>, not represented in the labeled dataset i.e. the <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">source domain</i>, to calibrate ANNs for improved performance. In this study we explore the potential of two UDA algorithms for domain shifts in myoelectric pattern recognition: Domain Adversarial Neural Networks (DANN) and Sliced Wasserstein Discrepancy (SWD). Offline evaluation identified SWD as the best-performing algorithm, which was subsequently validated in online experiments with 11 participants. Using UDA improved the performance on the target domain by 19% compared to an ANN trained through SL on data from the source domain only. Indeed, it nearly matched the performance of an ANN trained through SL on labeled data from both the source and target domain. This is the first time UDA was validated in online experiments as a viable approach to overcome domain shift problems caused by changes in limb position.

Unsupervised cross-domain person re-identification by instance and distribution alignment

Deep multi-Wasserstein unsupervised domain adaptation

Deep models may have disappointing performance in real applications due to the domain shifts in data distributions between the source and target domain. Although a few unsupervised domain adaptation methods have been proposed to make the pre-train models effective on target domain datasets, constraints like data privacy, security, and transmission limits restrict access to VHR remote sensing images, making existing unsupervised domain adaptation methods almost ineffective in specific change detection areas. Therefore, we propose a source-free unsupervised domain adaptation change detection structure to complete specific change detection tasks, using only the pre-trained source model and unlabelled target data. The GAN-based source generation component is designed to generate synthetic source data, which, to some extent, reflects the distribution of the source domain. Moreover, these data can be utilised in model knowledge transfer. The model adaptation component facilitates knowledge transfer between models by minimising the differences between deep features, using AAM (Attention Adaptation Module) to extract the difference between high-level features, meanwhile we proposed ISM (Intra-domain Self-supervised Module) to train target model in a self-supervised strategy in order to improve the knowledge adaptation. Our SFDA-CD framework demonstrates superior accuracy over existing unsupervised domain adaptation change detection methods, which has 0.6% cIoU and 1.5% F1 score up in cross-regional tasks and 1.4% cIoU and 1.9% F1 score up in cross-scenario tasks, proving that it can effectively reduce the domain shift between the source and target domains even without access to source data. Additionally, it can facilitate knowledge transfer from the source model to the target model.

Unsupervised deep domain adaptation algorithm for video based human activity recognition via recurrent neural networks

Cardiac segmentation on late gadolinium enhancement MRI: A benchmark study from multi-sequence cardiac MR segmentation challenge.

A bidirectional multilayer contrastive adaptation network with anatomical structure preservation for unpaired cross-modality medical image segmentation