Unsupervised cross-domain person re-identification by instance and distribution alignment

Unsupervised Domain Adaptation (UDA) methods for person Re-Identification (Re-ID) rely on target domain samples to model the marginal distribution of the data. To deal with the lack of target domain labels, UDA methods leverage information from labeled source samples and unlabeled target samples. A promising approach relies on the use of unsupervised learning as part of the pipeline, such as clustering methods. The quality of the clusters clearly plays a major role in methods performance, but this point has been overlooked. In this work, we propose a multi-step pseudo-label refinement method to select the best possible clusters and keep improving them so that these clusters become closer to the class divisions without knowledge of the class labels. Our refinement method includes a cluster selection strategy and a camera-based normalization method which reduces the within-domain variations caused by the use of multiple cameras in person Re-ID. This allows our method to reach state-of-the-art UDA results on DukeMTMC-Market1501 (source-target). We surpass state-of-the-art for UDA Re-ID by 3.4% on Market1501-DukeMTMC datasets, which is a more challenging adaptation setup because the target domain (DukeMTMC) has eight distinct cameras. Furthermore, the camera-based normalization method causes a significant reduction in the number of iterations required for training convergence.

Accurate evaluation of orchard areas from remote sensing images is of great importance in economic and ecological aspects. In practice, the differences in distributions between remote sensing images and the lack of data labels make the semantic segmentation model impossible to use in new data. Unsupervised domain adaptation (UDA) methods can improve the performance of the model in the target domain by aligning the source domain and the target domain. However, due to the class mismatch problem and the interference of high-dimensional feature complexity, most UDA methods cannot achieve satisfactory results in orchard areas segmentation task. To address these issues, we propose an UDA model for orchard areas segmentation by developing a class feature aggregate discriminator. The class feature aggregate discriminator is designed to distinguish intra-domain classes and align inter-domain classes, and class feature aggregate can represent class information of different domains, which helps the model to avoid the interference of complex information. In addition, adversarial loss reweighting is introduced to the novel model, which makes the segmentation model pay more attention to the orchard areas. To verify the effectiveness of the proposed method, we conducted extensive experiments in three different remote sensing images around Yichang City. Compared to the baseline model, the proposed approach improves IoU by 27.68%, and we achieve high gains of 6.07% in IoU over other UDA methods. The larger gain indicates that our proposed method has great potential in cross-domain orchard areas segmentation.

Sensors are devices that output signals for sensing physical phenomena and are widely used in all aspects of our social production activities. The continuous recording of physical parameters allows effective analysis of the operational status of the monitored system and prediction of unknown risks. Thanks to the development of deep learning, the ability to analyze temporal signals collected by sensors has been greatly improved. However, models trained in the source domain do not perform well in the target domain due to the presence of domain gaps. In recent years, many researchers have used deep unsupervised domain adaptation techniques to address the domain gap between signals collected by sensors in different scenarios, i.e., using labeled data in the source domain and unlabeled data in the target domain to improve the performance of models in the target domain. This survey first summarizes the background of recent research on unsupervised domain adaptation with time series sensor data, the types of sensors used, the domain gap between the source and target domains, and commonly used datasets. Then, the paper classifies and compares different unsupervised domain adaptation methods according to the way of adaptation and summarizes different adaptation settings based on the number of source and target domains. Finally, this survey discusses the challenges of the current research and provides an outlook on future work. This survey systematically reviews and summarizes recent research on unsupervised domain adaptation for time series sensor data to provide the reader with a systematic understanding of the field.

Unsupervised domain adaptation (UDA) is an important solution to reduce the bias between the labeled source domain and the unlabeled target domain. It has attracted more attention for optical remote sensing image scene classification and retrieval. Currently, most of the previous work is devoted to closed-set UDA. In fact, the target domain often contains unknown classes. Moreover, some open UDA methods mine structural information of the target domain directly from the type knowledge of the source domain, and less directly from the unlabeled data of the target domain. In this paper, we propose a new self-supervised-driven open-set UDA method combining contrastive self-supervised learning with consistency self-training for optical remote sensing scene classification and retrieval. Specifically, a contrastive self-supervised learning network is introduced to learn discriminative features from the unlabeled target domain data. Moreover, a novel open-set class learning module is developed based on two-level confidence rules and the consistency self-training strategy, which can obtain reliable unknown class samples for co-training. Finally, an open-set dataset including six cross-domain scenarios is constructed based on three public datasets and several experiments are conducted with eleven state-of-the-art domain adaptation methods. Experimental results demonstrate that our proposed method achieves superior performances on the six open-set cross-domain scenarios in both scene classification and retrieval. Especially, our method improves the overall classification accuracies by 9.72% to 24.06% and improve mean average retrieval precisions by 8.06% to 16.21% on the complex UCMD (source domain) → NWPU (target domain) scenario, compared with the other eleven state-of-the-art methods.

With the rapid development of the remote sensing monitoring and computer vision technology, the deep learning method has made a great progress to achieve applications such as earth observation, climate change and even space exploration. However, the model trained on existing data cannot be directly used to handle the new remote sensing data, and labeling the new data is also time-consuming and labor-intensive. Unsupervised Domain Adaptation (UDA) is one of the solutions to the aforementioned problems of labeled data defined as the source domain and unlabeled data as the target domain, i.e., its essential purpose is to obtain a well-trained model and tackle the problem of data distribution discrepancy defined as the domain shift between the source and target domain. There are a lot of reviews that have elaborated on UDA methods based on natural data, but few of these studies take into consideration thorough remote sensing applications and contributions. Thus, in this paper, in order to explore the further progress and development of UDA methods in remote sensing, based on the analysis of the causes of domain shift, a comprehensive review is provided with a fine-grained taxonomy of UDA methods applied for remote sensing data, which includes Generative training, Adversarial training, Self-training and Hybrid training methods, to better assist scholars in understanding remote sensing data and further advance the development of methods. Moreover, remote sensing applications are introduced by a thorough dataset analysis. Meanwhile, we sort out definitions and methodology introductions of partial, open-set and multi-domain UDA, which are more pertinent to real-world remote sensing applications. We can draw the conclusion that UDA methods in the field of remote sensing data are carried out later than those applied in natural images, and due to the domain gap caused by appearance differences, most of methods focus on how to use generative training (GT) methods to improve the model’s performance. Finally, we describe the potential deficiencies and further in-depth insights of UDA in the field of remote sensing.

Bionic limb control through myoelectric pattern recognition, offering intuitive decoding of motor intent, can improve the quality of life for individuals with amputations. However, most work on pattern recognition only uses a small subset of the myoelectric data generated during daily life, to train an Artificial Neural Network (ANN) via Supervised Learning (SL). Scenarios substantially different from the recording session e.g. different limb positions, can lead to misclassifications by the ANN during everyday usage of the bionic limb. Recording labeled data from all scenarios encountered in daily life could alleviate the problem, but would be prohibitively time consuming. Unsupervised Domain Adaptation (UDA) offers a solution by leveraging unlabeled data from a <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">target domain</i>, not represented in the labeled dataset i.e. the <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">source domain</i>, to calibrate ANNs for improved performance. In this study we explore the potential of two UDA algorithms for domain shifts in myoelectric pattern recognition: Domain Adversarial Neural Networks (DANN) and Sliced Wasserstein Discrepancy (SWD). Offline evaluation identified SWD as the best-performing algorithm, which was subsequently validated in online experiments with 11 participants. Using UDA improved the performance on the target domain by 19% compared to an ANN trained through SL on data from the source domain only. Indeed, it nearly matched the performance of an ANN trained through SL on labeled data from both the source and target domain. This is the first time UDA was validated in online experiments as a viable approach to overcome domain shift problems caused by changes in limb position.

Deep multi-Wasserstein unsupervised domain adaptation

Unsupervised deep domain adaptation algorithm for video based human activity recognition via recurrent neural networks

Contemporary domain generalization (DG) and multisource unsupervised domain adaptation (UDA) methods mostly collect data from multiple domains together for joint optimization. However, this centralized training paradigm poses a threat to data privacy and is not applicable when data are non-shared across domains. In this work, we propose a new approach called Collaborative Optimization and Aggregation (COPA), which aims at optimizing a generalized target model for decentralized DG and UDA, where data from different domains are non-shared and private. Our base model consists of a domain-invariant feature extractor and an ensemble of domain-specific classifiers. In an iterative learning process, we optimize a local model for each domain, and then centrally aggregate local feature extractors and assemble domain-specific classifiers to construct a generalized global model, without sharing data from different domains. To improve generalization of feature extractors, we employ hybrid batch-instance normalization and collaboration of frozen classifiers. For better decentralized UDA, we further introduce a prediction agreement mechanism to overcome local disparities towards central model aggregation. Extensive experiments on five DG and UDA benchmark datasets show that COPA is capable of achieving comparable performance against the state-of-the-art DG and UDA methods without the need for centralized data collection in model training.

Unsupervised domain adaptation (UDA) has been widely studied with the goal of transferring knowledge from a label-rich source domain to a related but unlabeled target domain. Most UDA techniques achieve this by reducing the feature discrepancies between the two domains to learn domain-invariant feature representations. While domain-invariant feature representations can reduce the differences between the source and target domains, excessively simplifying these differences may cause the model to overlook important domain-specific features, resulting in a decline in transfer learning effectiveness. To address this issue, this paper proposes a novel Gaussian Mixture Model for graph domain adaptation (GMM). This model effectively reduces the distributional bias between the source and target domains by modeling the distribution differences on a graph structure. GMM leverages the local structural information of the graph and the clustering capability of the Gaussian mixture model to automatically learn the latent mapping relationships between the source and target domains. To the best of our knowledge, this is the first work to introduce a Gaussian mixture model into UDA. Extensive experimental results on three standard benchmarks demonstrate that the proposed GMM algorithm outperforms state-of-the-art unsupervised domain adaptation methods in terms of performance.

Purpose To determine whether the unsupervised domain adaptation (UDA) method with generated images improves the performance of a supervised learning (SL) model for prostate cancer (PCa) detection using multisite biparametric (bp) MRI datasets. Materials and Methods This retrospective study included data from 5150 patients (14 191 samples) collected across nine different imaging centers. A novel UDA method using a unified generative model was developed for PCa detection using multisite bpMRI datasets. This method translates diffusion-weighted imaging (DWI) acquisitions, including apparent diffusion coefficient (ADC) and individual diffusion-weighted (DW) images acquired using various b values, to align with the style of images acquired using b values recommended by Prostate Imaging Reporting and Data System (PI-RADS) guidelines. The generated ADC and DW images replace the original images for PCa detection. An independent set of 1692 test cases (2393 samples) was used for evaluation. The area under the receiver operating characteristic curve (AUC) was used as the primary metric, and statistical analysis was performed via bootstrapping. Results For all test cases, the AUC values for baseline SL and UDA methods were 0.73 and 0.79 (P < .001), respectively, for PCa lesions with PI-RADS score of 3 or greater and 0.77 and 0.80 (P < .001) for lesions with PI-RADS scores of 4 or greater. In the 361 test cases under the most unfavorable image acquisition setting, the AUC values for baseline SL and UDA were 0.49 and 0.76 (P < .001) for lesions with PI-RADS scores of 3 or greater and 0.50 and 0.77 (P < .001) for lesions with PI-RADS scores of 4 or greater. Conclusion UDA with generated images improved the performance of SL methods in PCa lesion detection across multisite datasets with various b values, especially for images acquired with significant deviations from the PI-RADS-recommended DWI protocol (eg, with an extremely high b value). Keywords: Prostate Cancer Detection, Multisite, Unsupervised Domain Adaptation, Diffusion-weighted Imaging, b Value Supplemental material is available for this article. © RSNA, 2024.

Soft prompt-tuning for unsupervised domain adaptation via self-supervision

Rethinking unsupervised domain adaptation for semantic segmentation

Unsupervised domain adaptation aims to learn domain-invariant features across domains to transfer knowledge from a well-labeled source domain to an unlabeled target domain. Recently, some unsupervised domain adaptation methods focus on semantically aligning data distributions with pseudo-labels of the target domain. However, semantic alignment based on pseudo-labels has potential risks, e.g., inaccurate pseudo-labeling from classifier, and error accumulation from pseudo-label bias. To alleviate these risks, we propose a novel self-supervision based semantic alignment (S3A) approach for unsupervised domain adaptation, which can jointly incorporate the source alignment and cross-domain target alignment for better semantic alignment across domains. S3A consists of a two-stage semantic alignment procedure with self-supervision. One is to capture the discriminative structure of source domain by aligning source data to source class prototypes, and the other is to match each target data to its neighbor in source domain with self-supervision. Extensive experiments on three benchmark datasets demonstrate the effectiveness of our proposed method, compared with the representative adversarial learning and self-supervised learning based unsupervised domain adaptation methods.

When deep neural networks are deployed in a highly automated vehicle for environment perception tasks in an unseen (target) domain that differs from the training (source) domain, the mismatch will result in decreased performance. Domain adaptation methods aim at overcoming this mismatch. Many recently investigated methods for unsupervised domain adaptation train a model using labeled source data and unlabeled target data at the same time. These methods assume that data from the target domain is available during the source domain training, which is not always the case in real applications. In this paper we present a way to perform an online style transfer for continual domain adaptation which improves performance on (multiple) unseen target domains using a given perception model. The approach is based on an image style transfer in the frequency domain and requires neither an adjustment of the given source-trained model parameters to the target domain, nor does it require any considerable amount of memory for storing its frequency domain representation of the source domain style, which is particularly important considering the hardware limitations in an autonomous vehicle.