Rupiah Classification System using Segmented Fractal Texture Analysis and HSV Color Features

Pineapple is one of the potential commodities in Indonesia. This is due to high market demand, potential suitable land in Indonesia and public awareness of fruit supply. The main factor of crop failure in pineapple plants is the delay in handling pineapple plant diseases. To identify in image processing requires class grouping. Self-Organizing Map (SOM) which divides the input pattern into several groups so that the network output is in the form of the group that is most similar to the given input. However, the SOM algorithm requires data input that characterizes an object to facilitate the identification process. So, in this study the SOM algorithm was improved through color feature extraction with parameters Red, Green, Blue, Hue, Saturation and Value, as well as texture feature extraction with parameters contrast, correlation, energy, and homogeneity in the Gray Level Co-occurrence Matrix (GLCM). Based on the results of tests carried out by the SOM algorithm with color and texture feature extraction parameters, it is able to assist in increasing the accuracy value. The results of testing the SOM model with color and texture feature extraction obtained a precision value of 93.33%, recall of 92.31% and accuracy of 92.78%.

Nowadays, humans tend to carry out activities during the day, both indoors and outdoors. Activities carried out outdoors cause human skin to often receive direct exposure to sunlight, which contains ultraviolet (UV) rays. Direct exposure to UV rays on the skin will harm the skin's health, which is the covering of the human body. Harmful effects on the skin usually include the skin becoming dark and dull, burns, and even causes cancer. One of the skin cancers that may appear on human skin is Actinic Keratosis (AK) cancer. AK cancer is a type of cancer that is classified as benign and can be cured with medical help. However, if this cancer is not caught early, it can become Squamous Cell Carcinoma (SCC), a type of malignant cancer. This research aims to design a system for identifying AK cancer types using color and texture feature extraction. RGB color feature extraction is obtained from image color segmentation and RGB values. The Gray Level Co-occurrence Matrix (GLCM) method is used to determine the texture of the skin cancer. Identification is carried out by a classification process using a Support Vector Machine (SVM), which can recognize the type of AK cancer. This research uses three classification methods: classification with color extraction, classification with texture extraction, and classification with color and texture extraction. Research shows that the highest level of accuracy in cancer recognition reaches 96% by combining color and texture extraction results as classification determinants. So, the system designed has succeeded in recognizing the type of AK cancer early on..

The Content Based Image Retrieval (CBIR) is a technique that works on images and in response extracts relevant images. A novel hybrid two stage universal CBIR technique using both colour and texture features extraction is proposed in this paper. In the first stage for colour feature extraction, colour moments up to the fourth order are extracted and are used in deriving the respective histograms which forms the colour feature vector. In the second stage for the texture feature extraction the CCM (Colour Co-occurrence Matrix) technique employed takes into account the correlation between the RGB colour bands in all the eight directions while computing the texture features. In every stage the distance between the query image and the image in the database is calculated by using relative distance measure. The resultant distance between the query image and the image in the database is calculated by using a weighted distance classifier. Thus, a hybrid fusion method is achieved that has better performance than other colour-spatial based methods and promises to give more relevant output to the user.KeywordsCBIRlocal statistics histogramsSkewKurtosisCCM

Leukemia is a type of cancer that is on white blood cell. This disease are characterized by abundance of abnormal white blood cell called lymphoblast in the bone marrow. Classification of blood cell types, calculation of the ratio of cell types and comparison with normal blood cells can be the subject of diagnosing this disease. The diagnostic process is carried out manually by hematologists through microscopic image. This method is likely to provide a subjective result and time-consuming.The application of digital image processing techniques and machine learning in the process of classifying white blood cells can provide more objective results. This research used thresholding method as segmentation and multilayer method of back propagation perceptron with variations in the extraction of textural features, geometry, and colors. The results of segmentation testing in this study amounted to 68.70%. Whereas the classification test shows that the combination of feature extraction of GLCM features, geometry features, and color features gives the best results. This test produces an accuration value 91.43%, precision value of 50.63%, sensitivity 56.67%, F1Score 51.95%, and specitifity 94.16%.

Color and texture, as vital physical attributes of recombinant decorative thin wood, represent the initial visual information perceived by the human eye. These elements play a crucial role in shaping the human viewing experience. This paper centers on the user’s visual perception of recombinant decorative thin wood and is divided into two main sections: the extraction and analysis of color and texture features, and experimental research evaluating combinations of color and texture. The experiments yielded conclusions indicating that the design of color and texture significantly influences objective eye movement data. Specific findings include: (1) The gaze duration, gaze counts, and hotspot maps of the subjects consistently demonstrate high agreement across the three eye movement indicators. Notably, a significant difference is observed between gaze indicators and color blending modes. (2) Asymmetric oblique blending and high-brightness circumferential blending tend to attract subjects’ eye attention more effectively. These color groups are characterized by transparent layers, increased brightness, and a pronounced visual impact. Such features enhance the design effect of the texture, highlighting its layers.

This article described the feature extraction methods of crop disease based on computer image processing technology in detail. Based on color, texture and shape feature extraction method in three aspects features and their respective problems were introduced start from the perspective of lesion leaves. Application research of image feature extraction in the filed of crop disease was reviewed in recent years. The results were analyzed that about feature extraction methods, and then the application of image feature extraction techniques in the future detection of crop diseases in the field of intelligent was prospected.

Image analysis-based classification of pigmentation patterns in fish: A case study of pseudo-albinism in Senegalese sole

Banana plants (Musa spp.) are one of the leading horticultural commodities in Indonesia that have high economic value and play an important role in national food security. However, banana productivity often decreases due to attacks by various diseases such as Sigatoka, Cordana, and Pestalotiopsis infections that can spread quickly. Early detection of these diseases is crucial to prevent greater losses. This study aims to develop a banana plant disease detection system based on digital image processing with the Support Vector Machine (SVM) algorithm. The research method includes the stages of banana leaf image acquisition, pre-processing using color segmentation, color and texture feature extraction, and disease type classification with the SVM algorithm. The test results show that the developed system is able to recognize banana leaf diseases with an accuracy of 97.8%, precision of 97%, and recall of 98%. These findings prove that the application of digital image processing and the SVM algorithm is effective in detecting banana plant diseases. This system is expected to be a fast, efficient, and accurate diagnostic tool for farmers to increase the productivity and quality of banana harvests.

A method fusing spectral and image information with a one-dimensional convolutional neural network(1D-CNN) for the detection of moisture content in Orah mandarin (Citrus reticulata Blanco) was proposed. The 1D-CNN model integrated with three different attention modules (SEAM, ECAM, CBAM) and machine learning models were applied to individual spectrum and fused information by passing the traditional feature extraction stage. Additionally, the dimensionality reduction of hyperspectral images and extraction of one-dimensional color and textural features from the reduced images were performed, thus avoiding the large parameter volumes and efficiency decline inherent in the direct modeling of two-dimensional images. The results indicated that the 1D-CNN model with integrated attention modules exhibited clear advantages over machine learning models in handling multi-source information. The optimal machine learning model was determined to be the random forest (RF) model under the fusion information, with a correlation coefficient (R) of 0.8770 and a root mean square error (RMSE) of 0.0188 on the prediction set. The CBAM-1D-CNN model under the fusion information exhibited the best performance, with an R of 0.9172 and an RMSE of 0.0149 on the prediction set. The 1D-CNN models utilizing fusion information exhibited superior performance compared to single spectrum, and 1D-CNN with the fused information based on SEAM, ECAM, and CBAM respectively improved Rp by 4.54%, 0.18%, and 10.19% compared to the spectrum, with the RMSEP decreased by 11.70%, 14.06%, and 31.02%, respectively. The proposed approach of 1D-CNN integrated attention can obtain excellent regression results by only using one-dimensional data and without feature pre-extracting, reducing the complexity of the models, simplifying the calculation process, and rendering it a promising practical application.

The term "Songket" comes from the Malay word "Sungkit", which means "to hook" or "to gouge". Every motifs names and variations was derived from plants and animals as source of inspiration to create many patterns of songket. Each of songket patterns have a philosophy in form of rhyme that refers to the nature of the sources of songket patterns and that philosophy reflects to the beliefs and values of Malay culture. In this research, we propose a system to facilitate an understanding of songket and the philosophy as a way to conserve Songket culture. We propose a system which is able to collect information in image songket motif variations based on feature extraction methods. On each image songket motif variations, we extracted philosophy of rhyme into impressions, and extracting color features of songket images using a histogram 3D-Color Vector quantization (3D-CVQ), shape feature extraction songket image using HU Moment invariants. Then, we created an image search based on impressions, and impressions search based on image. We use techniques of search based on color, shape and aggregation (combination of colors and shapes). The experiment using impression as query : 1) Result based on color, the average value of true 7.3, total score 41.9, 2) Result based on shape, the average value of true 3, total score 16.4, 3) Result based on aggregation, the average value of true 3, total score 17.4. While based using Image Query : 1) Result based on color, the average precision 95%, 2) Result based on shape, average precision 43.3%, 3) Based aggregation, the average precision 73.3%. From our experiments, it can be concluded that the best search system using query impression and query image is based on the color.Keyword : Image Search, Philosophy, impression, Songket, cultural computing, Feature Extraction, Analytical aggregation.

The extraction of color features plays an important role in image recognition and image retrieval. In the past, feature extraction mainly depends on manual or supervised learning, which limits the automation of the whole recognition or retrieval process. In order to solve the above problems, an automatic color extraction algorithm based on artificial intelligence is proposed. According to the characteristics of BMP image, the paper makes use of the conversion between image color space and realizes it in the visual C++6.0 environment. The experimental results show that the algorithm realizes the basic operation of image preprocessing, and realizes the automatic extraction of image color features by proper data clustering algorithm.

Due to the prevalence of digital cameras, it is easy to retrieve digital images from the Internet. With the rapid development of digital image processing, databases, and Internet technologies, how to efficiently manage a large amount of digital images is very important. In this paper, we proposed a novel approach for automatic image annotation. We extract color, texture, and shape features from a set of training images to build the main object classifier and background object models by using Support Vector Machine (SVM). We apply JSEG to segment background objects out of images, and then extract the feature vectors from the segmented objects for identification. In order to prevent over-segmenting the main object, the combination of Active Contour Model and JSEG is proposed to improve the system performance. Since the images in the same class have background consistency, we exploit Gaussian mixture model (GMM) to explore the relationship between image classes and image backgrounds, and build the association knowledge base. After classifying test images, we only need to compare the backgrounds with the related models for classification. Finally, the experimental results show that the proposed method has high effectiveness for image annotation.

Modulating a Local Shape Descriptor through Biologically Inspired Color Feature

Visual based route and boundary detection is a key technology in agricultural automatic navigation systems. The variable illumination and lack of training samples has a bad effect on visual route detection in unstructured farmland environments. In order to improve the robustness of the boundary detection under different illumination conditions, an image segmentation algorithm based on support vector machine was proposed. A superpixel segmentation algorithm was adopted to solve the lack of training samples for a support vector machine. A sufficient number of superpixel samples were selected for extraction of color and texture features, thus a 19-dimensional feature vector was formed. Then, the support vector machine model was trained and used to identify the paddy ridge field in the new picture. The recognition F1 score can reach 90.7%. Finally, Hough transform detection was used to extract the boundary of the ridge field. The total running time of the proposed algorithm is within 0.8 s and can meet the real-time requirements of agricultural machinery.

Image deraining is a crucial preprocessing task for enhancing the robustness of high-level vision systems under adverse weather conditions. However, most of the existing methods are limited to a single RGB color space, and it is difficult to effectively separate high-frequency rain streaks from low-frequency backgrounds, resulting in color distortion and detail loss in the restored image. Therefore, a rain removal network that combines dual-color space and frequency domain priors is proposed. Specifically, the devised network employs a dual-branch Transformer architecture to extract color and structural features from the RGB and YCbCr color spaces, respectively. Meanwhile, a Hybrid Attention Feedforward Block (HAFB) is constructed. HAFB achieves feature enhancement and regional focus through a progressive perception selection mechanism and a multi-scale feature extraction architecture, thereby effectively separating rain streaks from the background. Furthermore, a Wavelet-Gated Cross-Attention module is designed, including a Wavelet-Enhanced Attention Block (WEAB) and a Dual Cross-Attention module (DCA). This design enhances the complementary fusion of structural information and color features through frequency-domain guidance and bidirectional semantic interaction. Finally, experimental results on multiple datasets (i.e., Rain100L, Rain100H, Rain800, Rain12, and SPA-Data) demonstrate that the proposed method outperforms other approaches.