SAR image change detection using regularized dictionary learning and fuzzy clustering

ABSTRACTThe speckle noise of synthetic aperture radar (SAR) images limits its application in change detection. Compared with improved ratio (IR) and log-ratio (LR) operators, the neighborhood-based ratio (NR) technique can restrain the influence of speckle noise and is more suitable for change detection in SAR images. However, we find three drawbacks of NR by analyzing this method carefully. To overcome these defects, we propose an improved neighborhood-based ratio (INR) approach for change detection in SAR images. INR restructures the NR operator to exploit the neighborhood information more reasonably and is expected to reduce the impact of speckle noise better. IR, LR, mean ratio operator, NR, and INR are tested on two data sets to compare their performances in change detection of SAR images. Experimental results show that the proposed method can obtain better difference image than other state-of-art methods and improve the accuracy of change detection in SAR images effectively.

SAR (synthetic aperture radar) images have been successfully used in change detection in different conditions. A systematic survey of the generally used methodologies for unsupervised change detection based on SAR images are presented in this paper. Speckle suppression, which is essential in SAR image change detection, is discussed and all unsupervised change detection approaches are classified into three categories: thresholding, clustering and 0-1 programming.

Compared with the synthetic aperture radar (SAR) image processing theory based on local neighborhood, the nonlocal theory is not limited to a local neighborhood of an image and has great potential in change detection of SAR images. In this study, an approach using ratio-based nonlocal information (RNLI) is proposed for change detection in multitemporal SAR images. First, the RNLI is extracted from a spatial-temporal nonlocal neighborhood where the similarity of two pixels in the nonlocal neighborhood is well characterized by the proposed ratio-based Gaussian kernel function. The parameters of RNLI: noise level and matching window size are adaptively determined to avoid the uncertainty of the change detection result caused by user experience. Second, the difference image is generated by using the RNLI and the ratio operator. Finally, the change map is obtained by segmenting the difference image with a threshold. Experiments conducted on two real datasets and two simulated datasets showed that the proposed method performed better than the other advanced change detection methods, which can better retain the edge information of the changed area while reducing the overall error of the change detection results.

Change detection (CD) in remote sensing imagery has found broad applications in ecosystem service assessment, disaster evaluation, urban planning, land utilization, etc. In this paper, we propose a novel graph model-based method for synthetic aperture radar (SAR) image CD. To mitigate the influence of speckle noise on SAR image CD, we opt for comparing the structures of multi-temporal images instead of the conventional approach of directly comparing pixel values, which is more robust to the speckle noise. Specifically, we first segment the multi-temporal images into square patches at multiple scales and construct multi-scale K-nearest neighbor (KNN) graphs for each image, and then develop an effective graph fusion strategy, facilitating the exploitation of multi-scale information within SAR images, which offers an enhanced representation of the complex relationships among features in the images. Second, we accomplish the interaction of spatio-temporal-radiometric information between graph models through graph mapping, which can efficiently uncover the connections between multi-temporal images, leading to a more precise extraction of changes between the images. Finally, we use the Markov random field (MRF) based segmentation method to obtain the binary change map. Through extensive experimentation on real datasets, we demonstrate the remarkable superiority of our methodologies by comparing with some current state-of-the-art methods.

This study evaluates the performance of a Support Vector Machine (SVM) classifier to learn and detect changes in single- and multi-temporal X- and L-band Synthetic Aperture Radar (SAR) images under varying conditions. The purpose is to provide guidance on how to train a powerful learning machine for change detection in SAR images and to contribute to a better understanding of potentials and limitations of supervised change detection approaches. This becomes particularly important on the background of a rapidly growing demand for SAR change detection to support rapid situation awareness in case of natural disasters. The application environment of this study thus focuses on detecting changes caused by the 2011 Tohoku earthquake and tsunami disaster, where single polarized TerraSAR-X and ALOS PALSAR intensity images are used as input. An unprecedented reference dataset of more than 18,000 buildings that have been visually inspected by local authorities for damages after the disaster forms a solid statistical population for the performance experiments. Several critical choices commonly made during the training stage of a learning machine are being assessed for their influence on the change detection performance, including sampling approach, location and number of training samples, classification scheme, change feature space and the acquisition dates of the satellite images. Furthermore, the proposed machine learning approach is compared with the widely used change image thresholding. The study concludes that a well-trained and tuned SVM can provide highly accurate change detections that outperform change image thresholding. While good performance is achieved in the binary change detection case, a distinction between multiple change classes in terms of damage grades leads to poor performance in the tested experimental setting. The major drawback of a machine learning approach is related to the high costs of training. The outcomes of this study, however, indicate that given dynamic parameter tuning, feature selection and an appropriate sampling approach, already small training samples (100 samples per class) are sufficient to produce high change detection rates. Moreover, the experiments show a good generalization ability of SVM which allows transfer and reuse of trained learning machines.

Change detection can be performed in a supervised manner. However, supervised methods for synthetic aperture radar (SAR) image change detection may suffer from lack of training samples. Therefore, in this letter, a semisupervised support vector machine classifier based on a cluster-neighborhood (CN) kernel is proposed for SAR image change detection. In the proposed method, samples are categorized into two neighborhoods with kernel k-means clustering algorithm. In addition, a CN kernel is constructed based on the composite-ratio kernel using the neighborhood-based statistical features. When a few labeled samples are available, the proposed CN kernel explores the information of unlabeled samples to enhance its discriminative ability and enhance its robustness against speckles. Experimental results on real SAR image change detection demonstrate the effectiveness of the proposed method when a few labeled samples are available.

ABSTRACTChange detection in synthetic aperture radar (SAR) images can be made as a matrix factorisation model, and it can detect the changes based on the foreground information in the image. However, these methods cannot obtain satisfactory results in the change detection of SAR images because reliable background data are often not available. In this article, we propose a matrix factorisation model based on a naïve Bayes classifier to explore the low-rank and sparse information, and then detect the changes in SAR images. The factorisation model of the low-rank and sparse matrix extracts both background and foreground information from images. From the low-rank and sparse matrices, we can get the background and foreground information recovered, respectively. Then by computing the mean and variance matrix of the unchanged and changed region information, we will obtain the statistical features. The statistical features are then used to build a naïve Bayes classifier, which is used to distinguish the change detection results, and all of them are based on the acquired data distribution. The experiments, which are based on four real data sets, indicate that the approach gets a better performance than some other state-of-the-art algorithms.

Synthetic aperture radar (SAR) imaging can penetrate rain, snow, fog, and mist, providing an effective precipitation detector under a wide range of atmospheric conditions. This powerful technique operates under any weather conditions and can detect environmental changes or help in the evaluation of natural disasters. Multi-temporal change detection is important for monitoring disasters, but commonly applied wavelet transforms are not ideal for capturing change information. This paper presents a new multi-directional change detection (MDCD) method designed to improve the change detection accuracy using multiple SAR images. This method employs double-density dual-tree complex wavelet transforms (DDDT-CWT) theory, which allows the capture of multi-directional information. The MDCD method can provide information for 16 directions at any decomposed scale, which allows for change detection in multiple SAR images collected over time. We used the MDCD algorithm method to analyse SAR images from actual natural disasters and successfully identified environmental changes over time using SAR images.

Change detection in remote-sensing images is used to detect changes during different time periods on the surface of the Earth. Because of the advantages of synthetic aperture radar (SAR), which is not affected by time, weather or other conditions, change-detection technology based on SAR images has important research value. At present, this technology has attracted the attention of increasingly more researchers, and has also been used extensively in diverse fields, such as urban planning, disaster assessment, and forest early warning systems. Our objective in this paper is to combine both the change detection of SAR images with the deep neural networks to compare its efficiency with fuzzy clustering method and deep belief network. Our experiments, conducted on real data sets and theoretical analysis, indicates the advantages of the proposed method. Our results appear that proposed deep-learning algorithms can further improve the change-detection process.

Distributed processing framework has been widely used in remote-sensing field. Spark, as a popular distributed computing framework, has been utilized to deal with big remote sensing data. However, it is inefficient due to that the application is not only data intensive but also computation intensive. For example, in Synthetic Aperture Radar (SAR) image change detection, clustering analysis can consume a lot of computing time and memory resources dealing with big remote sensing data. Coprocessors (GPU, MIC, etc.) have a high-compute power, which is able to handle computation intensive tasks. In this paper, we proposed an OpenCL-enabled Spark framework to accelerate Kernel Fuzzy C-Mean (KFCM) algorithm for SAR image change detection. And the computation intensive operations of KFCM are transferred to coprocessors of the cluster through the proposed OpenCL-enabled Spark framework. The experimental results on real SAR image indicate that the implementation on OpenCL-enabled Spark is efficient and scalable.

This tutorial presents a state-of-the-art survey of advanced applications of Synthetic Aperture Radar (SAR). Applications include: the detection and recognition of targets in SAR imagery, and the detection of targets under trees (and in the open) using change detection (coherent change detection, full-polarization change detection, etc). A fully polarimetric SAR sensor is described. Models of clutter and targets are developed from analysis of full-polarization SAR imagery. Algorithms for optimum (GLRT) processing of full-polarization data are derived, including the polarimetric whitening filter (PWF) and the polarimetric matched filter (PMF). Polarization-based discrimination features (polarization entropy, anisotropy, etc.) are developed and applied to SAR image terrain classification. Model-based and template-based target recognition systems are described and classifier performance results versus resolution and polarization are summarized for 10-and 20-target classifiers. Super-resolution algorithms are applied to SAR imagery and target recognition performance improvements demonstrated. Multi-polarization and multi-pass change detection algorithms are developed and demonstrated using UHF SAR imagery of targets under trees; fusion of multi-polarization coherent and non-coherent change detection algorithms is demonstrated. The effect of SAR image compression on change detection performance is quantified. Change detection performance using multi-pass VHF SAR imagery of targets under trees is demonstrated using data gathered by the Swedish CARABAS SAR system.

In this paper, we propose a synthetic aperture radar (SAR) image change detection algorithm based on SAR image nonstationary analysis and conditional random field (CRF) model. This algorithm segments the SAR images into two nonstationary regions with the Triplet Markov Field (TMF) model which incorporates a U field to describe the images' nonstationary nature. The combined posterior probability of the CRF model consists of two parts: the unary potential and the pairwise potential. The unary potential is modeled by support vector machine (SVM) using the texture features extracted from the two-temporal SAR images, and the pairwise potential is constructed by the multilevel logistical model to capture the spatial interactions of the log-ratio image. Both the unary and pairwise potentials are improved with the introduction of the U field. The parameters of the pairwise potential are estimated by the iterative conditional estimation (ICE) algorithm. The iterative conditional model (ICM) algorithm is utilized for updating the combined posterior probability, and the final change detection results are obtained when it converges. Finally, experimental results on four two-temporal SAR images validate the effectiveness of the proposed image change detection algorithm.

Change detection in multitemporal synthetic aperture radar (SAR) images has been an important research content in the field of remote sensing for a long time. In this article, based on the slow feature analysis (SFA) theory and the nonsubsampled contourlet transform (NSCT) algorithm, we propose a novel unsupervised change detection method called NSCT nonlocal means (NSCT-NLM). The powerful extraction to the changed information of SFA and the superior information fusion of NSCT are jointly adopted in this method. The main framework consists of the following parts. First, SFA and the log-ratio operator are used to generate difference images (DIs) independently. Then, the NSCT is used to fuse two DIs into a new higher quality DI. The newly fused DI combines the complementary information of the two kinds of original DI. Therefore, the contrast of the changed regions and unchanged regions is greatly enhanced, as well as the changed details are preserved more completely. Furthermore, an NLM filtering algorithm is employed to suppress the strong speckles in the fused DI. We use the fuzzy C-means algorithm to generate the final binary change map. The experiments are carried out on two public datasets and three real-world SAR datasets from different scenarios. The results demonstrate that the proposed method has higher detection accuracy by comparing with the reference methods.

This paper presents an incoherent change detection algorithm (CDA) for synthetic aperture radar (SAR) images based on logistic regression. The input data consists of a set of 24 SAR images acquired in a test site in northern Sweden [1]. Subsets of these images are trained based on pixel amplitude, flight heading and neighboring features such as local mean, standard deviation and skewness. The proposed method intends to explore the advantadges from both pixel- and object-based approaches, while evaluating multiple features in amplitude-only SAR images. Preliminary results based on K-fold cross-validation have shown that the proposed CDA achieves good performance when compared to the results presented in [1].

Change detection method based on fractal model and wavelet transform for multitemporal SAR images