Target recognition and polarimetric SAR

Many types of dark regions occur naturally or artificially in Synthetic Aperture Radar (SAR) and Coherent Change Detection (CCD) products. Occluded regions in SAR imagery, known as shadows, are created when incident radar energy is obstructed by a target with height from illuminating resolution cells immediately behind the target in the ground plane. No return areas are also created from objects or terrain that produce little scattering in the direction of the receiver, such as still water or flat plates for monostatic systems. Depending on the size of the dark region, additive and multiplicative noise levels are commonly measured for SAR performance testing. However, techniques for radar performance testing of CCD using dark regions are not common in the literature. While dark regions in SAR imagery also produce dark regions in CCD products, additional dark regions in CCD may further arise from decorrelation of bright regions in SAR imagery due to clutter or terrain that has poor wide-sense stationarity (such as foliage in wind), man-made disturbances of the scene, or unintended artifacts introduced by the radar and image processing. By comparing dark regions in CCD imagery over multiple passes, one can identify unintended decorrelation introduced by poor radar performance rather than phenomenology. This paper addresses select dark region automated measurement techniques for the evaluation of radar performance during SAR and CCD field testing.

Conventional Synthetic Aperture Radar (SAR) Coherent Change Detection (CCD) has been found to be of great utility in detecting changes that occur on the ground. The CCD procedure involves performing repeat pass radar collections to form a coherence product, where ground disturbances can induce detectable incoherence. However there is usually a difference in the radar collection geometry which can lead to incoherent energy noise entering the CCD. When sensing flat terrain in a far-field regime, the incoherence due to collection geometry difference can be removed through a conventional global Fourier image support trimming process. However, it has been found that when the terrain is either in a near-field regime or contains non-flat topography, the optimal trimming process is substantially more involved, so much so that a new per-pixel SAR bistatic back-projection imaging algorithm has been developed. The new algorithm removes incoherent energy from the bistatic SAR CCD collection pair on a per-pixel basis according to the local radar geometry and topography, leaving a higher coherence CCD product. In order to validate the approach, change detection measurements were conducted with GB-SAR, a ground-based indoor radar measurement facility.

Ship wake detection using synthetic aperture radar (SAR) imagery provides a way to obtain small marine ship information, but it often becomes unavailable and unreliable during a high sea state. Polarimetric information provides a potential way to solve this problem, which can enhance the ship target as well as the ship wake features. However, three challenges still exist in ship wake detection in polarimetric SAR imagery: the unwanted influences of bright and singular points on ship wake detection, the lack of performance analysis of wake detection by new-type polarimetric enhancement methods, and the difficulty of using the assessment criteria for ship wake detection. In this paper, we try to solve the above problems. Firstly, fully polarized SAR imagery of both ship turbulent and Kelvin wake is simulated based on the two-scale composite model, and the Polarimetric Whitening Filter (PWF) and Polarimetric Detection Optimization Filter (PDOF) are applied to the simulated fully polarized SAR imagery to enhance the ship wake features. Secondly, since the bright and singular points resulting from the ship echoes and the polarimetric enhancement methods may lead to misdetections, a logarithm process and z-score normalization pre-processing has been applied to the images. Then, a new assessment criterion for wake detection performance has been formulated, and the probability of missing detections (PMDs) and the probability of false alarms (PFAs) have been defined for two different requirements. And a Radon transform-based ship wake detection method for both ship turbulence and Kelvin wake has been carried out in horizontal–horizontal (HH), vertical–vertical (VV), horizontal–vertical (HV), PWF and PDOF SAR imagery. Finally, an analysis of the wake detection performance has been carried out. The PWF and PDOF can improve the wake detection performance by an average of nearly 50 percent compared with the HH and VV.

In practical Synthetic Aperture Radar (SAR) applications, new-class objects can appear at any time as the rapid accumulation of large-scale and high-quantity SAR imagery and are usually supported by limited instances in most cooperative scenarios. Hence, powering advanced deep-learning (DL)-based SAR Automatic Target Recognition (SAR ATR) systems with the ability to continuously learn new concepts from few-shot samples without forgetting the old ones is important. In this paper, we tackle the Few-Shot Class-Incremental Learning (FSCIL) problem in the SAR ATR field and propose a Forward-Compatible Prototype Classifier (FCPC) by emphasizing the model’s forward compatibility to incoming targets before and after deployment. Specifically, the classifier’s sensitivity to diversified cues of emerging targets is improved in advance by a Virtual-class Semantic Synthesizer (VSS), considering the class-agnostic scattering parts of targets in SAR imagery and semantic patterns of the DL paradigm. After deploying the classifier in dynamic worlds, since novel target patterns from few-shot samples are highly biased and unstable, the model’s representability to general patterns and its adaptability to class-discriminative ones are balanced by a Decoupled Margin Adaptation (DMA) strategy, in which only the model’s high-level semantic parameters are timely tuned by improving the similarity of few-shot boundary samples to class prototypes and the dissimilarity to interclass ones. For inference, a Nearest-Class-Mean (NCM) classifier is adopted for prediction by comparing the semantics of unknown targets with prototypes of all classes based on the cosine criterion. In experiments, contributions of the proposed modules are verified by ablation studies, and our method achieves considerable performance on three FSCIL of SAR ATR datasets, i.e., SAR-AIRcraft-FSCIL, MSTAR-FSCIL, and FUSAR-FSCIL, compared with numerous benchmarks, demonstrating its superiority and effectiveness in dealing with the FSCIL of SAR ATR.

A generalized control chart for anomaly detection in SAR imagery

This article introduces the application of a physics-based symbolic image partitioning method to detect targets in synthetic aperture radar (SAR) imagery. ‘Targets’ in this case refer to vehicular objects which produce a distinct radar return pattern, and have spatial characteristics that are known a priori. The proposed Rotationally Invariant Symbolic Histogram (RISH) detection method co-analyses both target and speckle statistics, and significantly reduces computational requirements by partitioning the data into a discrete number of state representations. RISH requires only one pass for robust detection, unlike other SAR detection methods which rely on difference metrics calculated using multiple passes. To improve performance in high-resolution data, RISH uses a weighted feature extraction algorithm to avoid the common requirement of processing each pixel of the image equally. The weighted structure extracts geometrically undefined and rotationally invariant target features. This article details the analysis of 24 experimentally obtained very high-frequency (VHF)-band SAR magnitude images using this novel approach to SAR target detection. In localizing small (~8.4 m2) foliage-concealed targets, without the aid of pre-processing, this method results in high performance characteristics (90% true positive) with a low Type-II error rate of 6.4 false alarms per 1 × 106 m2. With the addition of change detection, RISH lowers the error rate by 85%.

Normalized Difference Vegetation Index (NDVI) values extracted from remotely sensed optical imagery are used ubiquitously to monitor crop condition. However, challenges in the operational use of optical imagery are well documented making it difficult to capture measures of crop condition during critical phenology stages when clouds obscure. This study investigates the integration of Synthetic Aperture Radar (SAR) and optical imagery to characterize the condition of crop canopies in order to deliver daily measures of NDVI during the entire growing season. Multitemporal C-band polarimetric RADARSAT-2 SAR data and RapidEye images were acquired in 2012 for a study site in western Canada. SAR polarimetric parameters and NDVI were extracted. The temporal variations in SAR polarimetric parameters and NDVI were interpreted with respect to the development of the canola canopy. Optical NDVI was statistically related with SAR polarimetric parameters over test canola fields. Significant correlations were documented between a number of SAR polarimetric parameters and optical NDVI, in particular with respect to HV backscatter, span, volume scattering of the Freeman Durden decomposition and the radar vegetation index, with R-values of 0.83, 0.72, 0.81 and 0.71 respectively. Based on the statistical analysis, SAR polarimetric parameters were calibrated to optical NDVI, creating a SAR-calibrated NDVI (SARc-NDVI)). A canopy structure dynamics model (CSDM) was fitted to the SARc-NDVI, providing a seasonal temporal vegetation index curve. The coupling of NDVI from optical and SAR imagery with a CSDM demonstrates the potential to derive daily measures of crop condition over the entire growing season.

Target Recognition Using Pre-Trained Convolutional Neural Networks and Transfer Learning

This work aims to clarify the potential of incoherent and coherent change detection (CD) approaches for detecting and monitoring ground surface changes using sequences of synthetic aperture radar (SAR) images. Nowadays, the growing availability of remotely sensed data collected by the twin Sentinel-1A/B sensors of the European (EU) Copernicus constellation allows fast mapping of damage after a disastrous event using radar data. In this research, we address the role of SAR (amplitude) backscattered signal variations for CD analyses when a natural (e.g., a fire, a flash flood, etc.) or a human-induced (disastrous) event occurs. Then, we consider the additional pieces of information that can be recovered by comparing interferometric coherence maps related to couples of SAR images collected between a principal disastrous event date. This work is mainly concerned with investigating the capability of different coherent/incoherent change detection indices (CDIs) and their mutual interactions for the rapid mapping of “changed” areas. In this context, artificial intelligence (AI) algorithms have been demonstrated to be beneficial for handling the different information coming from coherent/incoherent CDIs in a unique corpus. Specifically, we used CDIs that synthetically describe ground surface changes associated with a disaster event (i.e., the pre-, cross-, and post-disaster phases), based on the generation of sigma nought and InSAR coherence maps. Then, we trained a random forest (RF) to produce CD maps and study the impact on the final binary decision (changed/unchanged) of the different layers representing the available synthetic CDIs. The proposed strategy was effective for quickly assessing damage using SAR data and can be applied in several contexts. Experiments were conducted to monitor wildfire’s effects in the 2021 summer season in Italy, considering two case studies in Sardinia and Sicily. Another experiment was also carried out on the coastal city of Houston, Texas, the US, which was affected by a large flood in 2017; thus, demonstrating the validity of the proposed integrated method for fast mapping of flooded zones using SAR data.

In this paper, a novel moving target detection and tracking approach is presented based on Gaussian mixture probability hypothesis density (GMPHD) filter in synthetic aperture radar (SAR). Based on the advantages of GMPHD filter and the characteristics of moving target in SAR imagery, GMPHD filter is employed on potential moving target candidates extracted from a sequence of temporal and spatial sub-aperture SAR images to detect and track the moving targets in heavy clutter environment. Utilizing the tracking algorithm, the states and the number of moving targets are obtained over time. Simultaneously, the strong ground stationary clutter lacking of the dynamic behavior is eliminated finally. Both simulation and real Gotcha data set processing results are provided to demonstrate the effectiveness of the proposed approach.

Synthetic Aperture Radar (SAR) imagery is available all the time and, in all weathers, due to its ability to penetrate through cloud cover, dust, haze except heavy rainfall. SAR imagery mainly characterizes structural properties of various earth objects and provides a data which is rich in spatial information. Processing of SAR data has been of great interest due to these advantages. However, due to coherent processing of SAR signal, imagery is corrupted by speckle noise which is multiplicative in nature. Reduction of speckle noise from SAR imagery is helpful for analysis and interpretation of SAR images. In this paper, performance of conventional speckle reduction filters, namely Lee, Enhanced Lee, Frost, Enhanced Frost and Gamma MAP are compared with wavelet-based filtering technique for RISAT-1 imagery. Results are compared visually and using quality metrics, Speckle Suppression Index (SSI), Equivalent Number of Looks (ENL) and Speckle Suppression and Mean Preservation Index (SMPI). From visual interpretation of de-speckled image, it is evident that wavelet-based filtering out performs the conventional filters in terms of edge and texture preservation.

Oil spills on the ocean from ships have a strong impact on the environment as well as on human societies. The MV X-Press Pearl container ship incident in 2021 became the worst marine environmental disaster in Sri Lanka due to its powerful impact. Oil leakage from the ship to the ocean continued for months. Synthetic Aperture Radar (SAR) imagery has the advantage of penetrating cloud cover, as well as day and night operating capabilities. Therefore, SAR imagery can be used to detect as well as observe the temporal changes of oil spills. The study in this article aimed to detect the oil spill caused by the MV X-Press Pearl container ship on Sri Lanka’s west coast from May to August 2021 using Sentinel-1 SAR data and measure the temporal changes of the oil slick. Three SAR imageries with Vertical-Vertical (VV) and Vertical-Horizontal (VH) polarization from June, July, and August of 2021 have been processed by applying the orbit file, running the multi-looking algorithm, and making the ellipsoid correction. The possible oil spills have been identified from each set of imagery as dark linear shapes with lengths of 3.1 ±0.012 km with an average reflectance of 15.6 decibels for June and 3.6 ±0.012 km with an average reflectance of 16.5 decibels for the other two months, and the shapes correspond with the oil slick classifications from other literature. The results indicate that the VV polarization is the most suitable to detect oil spills, and that the oil spill from the X-Press Pearl continued from June to the end of August 2021.

Synthetic Aperture Radar (SAR) imagery have been one of the important tools to support earth observations and topographic measurements. It means SAR imagery are essentially rich in structures and some important target categories are difficult to recognize. Optical imagery contains rich and clear spectral information which has a good influence on semantic image segmentation. The success of deep neural networks for semantic segmentation heavily depends on large-scale and well-labeled data sets, which are hard to collect in practice. In this paper, we consider deep transfer learning for semantic segmentation, we propose a deep novel transfer learning method, which transfers a semantically segment model from SAR imagery to SAR and optical fusion imagery. The experimental results show that the method proposed achieves higher mean Intersection over Union (mIoU) with less training time compared with other methods.

This thesis describes the application of the Cramer Rao inequality to synthetic aperture radar (SAR). The resulting Cramer Rao lower bounds (CRB) reveal the smallest possible error variances for target parameter estimates (position and reflectivity), regardless of the estimator or SAR processing. The performance bounds are consequently used to design synthetic arrays and evaluate multistatic SAR configurations. We show that optimal sensor arrangements of synthetic arrays offer the possibility for single-pass, monostatic SAR to mitigate an effect known as layover that often distorts radar imagery. We also show these nonlinear apertures can be used to image targets in three dimensions. Furthermore, a new detection/estimation algorithm for targets in SAR imagery is developed and mean-squared errors from Monte Carlo simulations are compared to corresponding CRBs. Finally, a dynamic model-based estimation algorithm is developed for SAR to localize targets behind building walls. This iterative, optimization technique shows the potential to avert the combinatorial complexity and local maximization associated with many classification problems requiring model-based solutions.

As an active microwave imaging sensor, Synthetic Aperture Radar (SAR) has become one of the main means of Earth observation owing to its unique technical advantages of all-day, all-weather operation and long working distance. As such, it plays a very important role in military and civilian fields. With the development of SAR remote-sensing technology, high-resolution, high-quality SAR images are produced continuously. However, manual detection and recognition of targets of interest is time-consuming and laborious, so the development of Automatic Target Recognition (ATR) technology is a matter of urgency. The typical SAR ATR system primarily comprises three stages: detection, discrimination, and classification/recognition. The detection and discrimination stages are the basis of the SAR ATR system, and research on SAR applications in the radar field has been conducted by researchers around the world. For single-channel SAR images, target detection and discrimination from simple scenes yield good results. However, in complex scenes, the clutter scattering intensity is relatively high, the clutter background is heterogenous, the target scattering intensity is relatively weak, and the target distribution is dense. These factors continue to make accurate SAR target detection and discrimination difficult. In this paper, we summarize the recent research progress on single-channel SAR target detection and discrimination methods for complex scenes, analyze the characteristics and problems associated with various methods, and consider the future development trend of single-channel SAR target detection and discrimination methods for complex scenes.