Secure Anonymous Key Distribution Scheme for Smart Grid

The smart meters in electricity grids enable fine-grained consumption monitoring. Thus, suppliers could adjust their tariffs. However, as smart meters are deployed within the smart grid field, authentication and key establishment between smart grid parties (smart meters, aggregators, and servers) become an urgency. Besides, as privacy is becoming a big concern for smart meters, smart grid parties are reluctant to leak their real identities during the authentication phase. In this paper, we analyze the recent authentication schemes in smart grids and other applied fields, and propose an anonymous authentication and key establishment scheme between smart grid parties: FAuth. The proposed scheme is based on bilinear maps and the computational Diffie–Hellman problem. We changed the way the smart meter parties registered at Key Generation Center, making the proposed scheme robust against various potential attacks that could be launched by the Key Generation Center, as the scheme could avoid the private key of the smart meter parties from leaking to the Key Generation Center. Besides, the proposed scheme reduced the computational load, both at the smart meter side and at the aggregator side, which make it perfectly suitable for computation-constrained devices. Security proof results show the proposed scheme is secure under the BAN logic and random oracle model.

In smart grid, key exchange protocols play a vital role in providing secure channels to read consumption reports from the smart meters. Thus far, several key exchange schemes have been proposed for the networked smart meters. However, for the first time, quite recently, Sha et al . have presented an interesting two-phase authentication and key agreement scheme that exclusively aims at the isolated smart meters. In their scheme, they have properly addressed the computationally constrained smart meters by offering a lightweight key exchange protocol. Nevertheless, after meticulous observation, we found that their proposed scheme cannot resist the desynchronization attack and cannot provide the perfect forward secrecy. Moreover, there are some other weaknesses in their scheme. As a result, to tackle the existing security challenges, in this paper, by utilization of the extended Chebyshev chaotic maps, we propose an efficient anonymous password-authenticated key exchange protocol that not only is free from the limitations of Sha et al .'s scheme, but also provides the anonymity. The security analysis in the random oracle model and using the widely accepted ProVerif tool besides the computational and communication costs comparison demonstrate that the proposed scheme has reached a proper level of efficiency without sacrificing the desired security properties.

An efficient dependable smart power grid relies on the secure real-time data collection and transmission service provided by a monitoring system. In such a system, the measuring units, such as phasor measurement units (PMUs) and smart meters (SMs), are critical. These measuring equipments function as sensors in the smart grid. Data exchanges between these sensors and the central controller are protected by various security protocols. These protocols usually contain computationally intensive cryptographic algorithms that cause heavy energy overhead to the sensor nodes. Since PMUs and SMs are mostly energy-constrained, the problem of how to ensure the secure communication with minimum energy cost becomes a critical issue for the functionality of the whole smart grid. In this article, we focus on the low power secure communication of the PMUs and SMs. We take two wireless sensor platforms as examples to experimentally investigate the approaches and principles of reconciling the two conflicting system requirements-communication security and low energy consumptions. The proposed methods are general ones and applicable to other energy-constrained yet security sensitive systems.

Smart grid (SG) achieves more convenient and efficient power transmission through the rapid development of the information and communication technology. In addition to the transmission of electrical energy, the SG system also involves privacy and control information of service providers, which is closely related to people's livelihood. However, at present, the data in the SG system are transmitted in the form of plaintext, which does not have complete protection measures for entity privacy and communication data security. Focusing on preserving entity privacy and data security, this article proposes an anonymous secure authentication protocol (ASAP-SG) for the SG environment. Based on elliptic curve cryptography and physical unclonable function, ASAP-SG can realize authentication and key agreement between smart meters and service providers. The security of ASAP-SG has been verified with proverif tool and proven strictly under the real-or-random model. Furthermore, heuristic analysis manifests that ASAP-SG can successfully resist known security attacks. Finally, a fully comparison with the other five most advanced schemes reveals that ASAP-SG consumes the optimal computation cost on both smart meters and service providers and reduces the communication overhead by 33.3%–45.8%, on the basis of satisfying ten security objectives. These features make ASAP-SG more suitable for resource-constrained SG environment.

Different from the traditional grid, smart grid builds a real-time connection network between the user and the grid company by smart terminals, which can achieve bidirectional data transmission and information control. In smart grid, the smart meters send various information to the power generators and substations. Frequent data collection meets real-time management, but it tends to raise privacy concerns from the users about privacy information leakage. Based on the blind signature and the key distribution scheme, an efficient and privacy-preserving data collection (EPPDC) scheme is proposed for smart grid to cope with the above problems. In EPPDC scheme, the users' data information is transmitted to the local aggregator by building gateway with privacy preserving. In addition, the security analysis indicates that EPPDC scheme not only can resist replay attack, but also has source authentication and data integrity, confidentiality, unforgeability, nonrepudiation, and evolution of shared keys. Furthermore, performance analysis shows that EPPDC scheme has less computation cost than existing scheme.

Reducing the power supply-demand gap and increasing reliability of power supply are the challenges of current energy management. Implementation of smart grid, smart meters and smart metering can be a possible solution for power demand reduction, efficient power supply management, and optimization of management resource usages. Smart meters include sophisticated measurement and calculation hardware, software, calibration and communication capabilities. For interoperability within a smart grid infrastructure, smart meters are designed to perform functions, and store and communicate data according to certain standards. In this work we discuss smart meter and various elements of smart metering, current state of the technologies related to smart grid, smart meter, advanced metering infrastructure (AMI), and meter data flow in smart grid. We also discuss standards related to smart meter, meter data format and data transmission, functions of smart meter, and functionalities of smart meters, currently deployed by utilities around the world.

According to the United Nations’ (UN) estimation, the global population living in urban areas at present is 55%, which, at this pace, will reach 68% in 2050. The urban population is critically dependent on electricity because electricity is primarily an essential ingredient of the manufacturing systems and a necessity for an average urban household. The population will be severely affected by any sort of electricity brownout or blackout. The dependence of human life on electricity in today’s world has evolved electrical infrastructures to new technology infrastructures called smart grid. Smart grid infrastructure has become inevitable in prediction, generation, distribution, and billing of electricity. The integration of smart network systems in electricity generation, distribution, and measuring systems has become a priority for all the developed and developing countries. The use of smart energy meters, a vital part in the smart grid systems, is replacing the conventional metering systems. As per the IEI latest report in 2020, 98 million smart meters have been installed in the USA until 2019, which is 70% of the total US households. In other countries such as the UK, the smart metering infrastructure is a part of a governmental initiative. The use of smart technology in electrical infrastructures has brought multiple cost benefits to both the service providers and consumers, besides making it more secure, efficient, and safe. Its use is gaining popularity in combating environmental issues that the world is facing today. Security is one of the major challenges in the present-day smart grid systems because of the long-range communication on open networks. Cybercriminals, hackers, and terrorists are trying to attack this national infrastructure. This chapter offers a comprehensive survey of understanding of smart grid securities, the attacks, mainly cyberattacks, and the solutions being offered by various researchers, methodologies used, and the communication protocols used. This chapter also focuses on the cyberattacks, energy thefts on smart meters, and solutions recommended on the smart meters. This chapter finally discusses the various challenges in cybersecurity and the current proposed solutions with future research gap.

Secured gateway based communication in heterogeneous SM –neighbourhood area network in smart grid using FPGA design

Smart grid is considered as next generation power system which performs automated control and monitoring operations to make it self-resilience. Advanced Metering Infrastructure is an essential part of smart grid which enables two-way communication thereby providing real-time communication link between consumer and grid operators. Emergence of Distributed Energy Resources (DERs) at end user make AMI's operation more challenging. Smart Meters (SMs) are key components in AMI that sends Power Consumption Data (PCD) of home appliances to Distributed System Operator (DSO). PCD received at DSO can be used for real time pricing applications, real time energy consumption, automatic diagnostic, daily energy metering and tasks such as billing, monitoring, planning and predicting of energy usage. In the context of selling of excess energy generated at DER's to the grid, SMs participates in Demand Response (DR) applications to perform energy trading. Revealing PCD of a home leads to privacy breach, hence it is necessary to achieve secure communication between SM and DSO. At the same time, it is essential to make energy trading transparent. To address this issue, this paper proposes a cloud based private blockchain framework to accomplish secure communication between SM and DSO without compromising privacy. Furthermore, trust between SM and DSO is achieved through smart contracts. Performance evaluation of the proposed blockchain shows its applicability to the said environment.

The smart grid concept is introduced to accelerate the operational efficiency and enhance the reliability and sustainability of power supply by operating in self-control mode to find and resolve the problems developed in time. In smart grid, the use of digital technology facilitates the grid with an enhanced data transportation facility using smart sensors known as smart meters. Using these smart meters, various operational functionalities of smart grid can be enhanced, such as generation scheduling, real-time pricing, load management, power quality enhancement, security analysis and enhancement of the system, fault prediction, frequency and voltage monitoring, load forecasting, etc. From the bulk data generated in a smart grid architecture, precise load can be predicted before time to support the energy market. This supports the grid operation to maintain the balance between demand and generation, thus preventing system imbalance and power outages. This study presents a detailed review on load forecasting category, calculation of performance indicators, the data analyzing process for load forecasting, load forecasting using conventional meter information, and the technology used to conduct the task and its challenges. Next, the importance of smart meter-based load forecasting is discussed along with the available approaches. Additionally, the merits of load forecasting conducted using a smart meter over a conventional meter are articulated in this paper.

Smart grids are electricity networks that can intelligently integrate the action of all connected users - producers, consumers, and prosumers (i.e., producers and consumers at the same time) - in order to efficiently deliver sustainable, economic and secure electricity supplies. Smart grids rely on a two-way communication infrastructures in which energy measurement data taken at users located smart meters, as well as control information, must be exchanged in real-time or - at least - near real-time, while simultaneously guaranteeing a secure and privacy preserving communication. This paper addresses such a problem by presenting a distributed communication architecture that guarantees the privacy of fine-grained users data while enabling the energy supplier to access aggregate energy measurements and per-user coarse-grained data for billing purposes. The key idea underlying the proposed architecture is to adopt a secure multiparty computation method based on a verifiable secret sharing of the keys used by the smart meters to encrypt their sensitive data. This approach allows to remove the need for any intermediate aggregator element with clear benefits in terms of scalability and robustness.

More efficient key establishment protocol for smart grid communications: Design and experimental evaluation on ARM-based hardware

SummaryIn smart grid, bidirectional communications between the smart meters and control center are subject to several security challenges. Since the smart meters have limited storage space and processing capability, the suggested communication scheme not only must consider the security requirements but also should put the least possible burden on the smart meters' resources. In 2014, an interesting communication scheme has been proposed for the secure consumption reports transmission of the smart meters to the neighbor gateways. In this paper, we first show that this scheme is vulnerable to the smart meter's memory modification, pollution, and denial of service attacks; then, we propose an authenticated communication scheme, which not only is secure against the aforementioned attacks, but also is much more efficient in terms of storage space, communication overhead, and computational complexity. Moreover, our scheme also presents the details of control messages transmission from the neighborhood gateways to the smart meters. Our comparative analysis with several recently published schemes indicates that the proposed scheme is more suitable than the previous ones. More significantly, our realistic implementation on ATmega2560, as a suitable candidate to be used for the smart meters, confirms our claim.

In smart grids, smart meters periodically collect users' fine-grained multi-dimensional energy data, which poses great concerns on users' privacy and security. Existing privacy preserving multi-dimensional aggregation schemes suffer from heavy computational burdens, especially for smart meters with limited computational resources. To address these limitations, in this paper we propose an efficient and flexible multi-dimensional data aggregation scheme called MDA-SMuSha, by which smart meters employ the Shamir's multi-secret sharing to generate a set of shared secrets, with the first one kept locally, while the remained ones are packaged and then uploaded to a control center via an aggregator. By the MDA-SMuSha scheme, aggregation results of smart meters' multi-dimensional energy data during multiple periods can be obtained, with only one time of Paillier encryption conducted on the smart meters. In addition, it allows the control center to send query requests flexibly, i.e., at a pre-specified frequency or whenever it wants to obtain statistical data of interests. Rigorous security analyses show that the MDA-SMuSha scheme satisfies security requirements of privacy-preservation, authenticity and data integrity as well as fault-tolerance. Both theoretical analyses and experiment results show that the MDA-SMuSha scheme outperforms state-of-the art methods in terms of computation costs, with comparable communication costs.

Public-key cryptography (PKC) is widely used in smart grid (SG) communications to reduce the overhead of key management. However, PKC comes with its own problems in terms of certificate management. Specifically, certificate revocation lists (CRLs) need to be maintained and distributed to the smart meters (SMs) in order to ensure security of the communications. The size of CRLs may grow over time and eventually may introduce additional delay, bandwidth, and storage overhead when various applications are run on SG. In this paper, we propose novel algorithms for creating customized CRLs with reduced size for IEEE 802.11s-based advanced metering infrastructure (AMI) networks. Rather than maintaining a huge-size single CRL that introduces unnecessary search time and storage, the idea is to cluster/group SMs within the AMI network and create CRLs based on these groups. The grouping is mainly done in such a way that they bring together the SMs that will be very likely to communicate so that the CRLs will be kept local to that group. To this end, we propose two novel grouping algorithms. The first algorithm is a bottom-up approach, which is based on the existing routes from the SMs to the gateway. Since the SMs will be sending their data to the gateway through the nodes on the route, this forms a natural grouping. The second approach is a top-down recursive approach, which considers the minimum spanning tree of the network and then divides it into smaller subtrees. Via grouping, the length of the CRL for each SM and the corresponding distribution overhead can be reduced significantly. Simulation results have shown that our approach can maintain a balance between the size of the CRL and the number of signatures generated by CAs while guaranteeing security of the communications.