Shape Optimization of Clutch Cushion Disc Using Differential Evolution Method

In response to the low accuracy exhibited by the Storm Water Management Model (SWMM), we propose an enhanced Differential Evolution and Bayesian Optimization Algorithm (DE-BOA) . This algorithm integrates the global search capability of the differential evolution algorithm with the local search capability of the Bayesian optimization algorithm, which enables a more comprehensive exploration of the vector solution space. A comparative analysis of various types of rainfall events is conducted. For model calibration and validation, a drainage subzone in Jinshazhou, Guangzhou City, is selected as the research subject. In total, 20 specific rainfall events are selected, and the DE-BOA algorithm outperforms the manual calibration, differential evolution algorithm, and Bayesian optimization algorithm regarding model calibration accuracy. Furthermore, the DE-BOA algorithm exhibits robust adaptability to rainfall events characterized by multiple peaks and higher precipitation levels, with Nash–Sutcliffe Efficiency coefficient values surpassing 0.90. This study’s findings could hold significant reference value for dynamically updating model parameters, thereby enhancing the model simulation performance and improving the accuracy of the urban intelligent water management platform.

Application of a Derivative-Free Method with Projection Skill to Solve an Optimization Problem

In recent years, Differential Evolution (DE) algorithm that is one of the most important delegate of the evolutionary algorithms have been successfully used for solving different optimization problems with its both serial and parallel variants. In this study, the performance of DE algorithm powered with cooperative emigrant creation strategy was investigated over the different types of numerical problems and obtained results were compared with the results of the serial DE and parallel DE algorithm supported with conventional emigrant creation strategy. Experimental studies showed that the convergence speed of the parallel DE algorithm is significantly improved with the cooperative emigrant creation strategy and the proposed parallel DE algorithm produces better results compared to the serial DE algorithm and parallel DE algorithm with the conventional emigrant creation strategy.

The Differential Evolution (DE) algorithm, under the family of Evolutionary Algorithms (EAs), is one of the powerful algorithms used for solving continuous parameter optimization challenges. The simplistic nature and robustness of the classical DE algorithm have drawn researchers' attention towards its progressive enhancement. This work reports on an investigation of the behavioral changes of the classical DE algorithm, evoked when its mutation and crossover components are fine tuned for enhancement of DE's performance. The scope of this study covers the implementation of a mutation level enhancement and a crossover level enhancement, followed by their integration. The mutation and the crossover components are augmented by incorporation of Centroid DE and Superior-Superior & Superior-Inferior DE logics, respectively. The algorithms appraised in this inquiry were classical DE, Centroid based DE(cDE), Superior-Superior based DE (ssDE), Superior-Inferior DE (siDE), Centroid Superior-Superior DE (cssDE) and Centroid Superior-Inferior DE (csiDE). These algorithms were evaluated by comparison of the values of their mean objective function (MOV), and their speed, at solving the global optimization problems in a simple benchmarking function suite with 4 functions of different categories. The study concludes that the DE algorithm shows enhancement performance with modified mutation and crossover components. However, with a trend for inconsistency for varying values of its control parameters and benchmarking problems.

Regulation-based formulas and improved Differential Evolution(DE) algorithm is used to optimize PID parameters. In order to improve the global search ability and the convergence rate of the common DE algorithm, self-adaptive method is introduced to obtain DE parameters. On the other hand, initial population quality of DE algorithm has important influence on convergence of the algorithm. So the regulation-based formulas are used to guide the production of initial population, which is good to improve the convergence rate and realize obtaining of PID parameters completely adaptive without any personal experience. The simulation is developed on steam temperature system of cycle fluidized bed boiler with serious parameter uncertainties and many disturbance and long-time delay. The results show that the improved DE algorithm has higher optimal speed, small amount of calculation and effective optimization of parameters. The proposed method has better control quality and system robustness.

Social learning differential evolution

A self-competitive mutation strategy for Differential Evolution algorithms with applications to Proportional–Integral–Derivative controllers and Automatic Voltage Regulator systems

In this work, a method to control the parameters of Differential Evolution (DE) algorithm is proposed. Here the control parameters of DE are co-evolved by Particle Swarm Optimization (PSO) algorithm. The classical DE algorithm has two main control parameters: Scale Factor (F) and Cross-over Rate (CR). These are selected on trial-and-error basis for solving optimization problems. Several optimization problems lead to optimal or sub-optimal solution by proper selection of control parameters of the DE algorithm. In this proposed method, PSO algorithm is used to tune the scale factor and cross-over rate in DE algorithm. Basically PSO algorithm is used as a meta-optimizer for DE algorithm. The proposed method is termed as mPSO-DE in this paper. The mPSO-DE algorithm is applied on 12 benchmark unconstrained optimization problems. The obtained results are compared with that of classical DE algorithm. From the experimental studies, it has been found that the proposed mPSO-DE algorithm performed better than DE algorithm.

There has been considerable research done on multi-chamber mufflers used in the elimination of industrial venting noise. However, most research has been restricted to lower frequencies using the plane wave theory. This has led to underestimating acoustical performances at higher frequencies. Additionally, because of the space-constrained problem in most plants, the need for optimization of a compact muffler seems obvious. Therefore, a muffler composed of multiple rectangular fin-shaped chambers is proposed. Based on the eigenfunction theory, a four-pole matrix used to evaluate the acoustic performance of mufflers will be deduced. A numerical case for eliminating pure tones using a three-fin-chamber muffler will also be examined. To delineate the best acoustical performance of a space-constrained muffler, a numerical assessment using the Differential Evolution (DE) method is adopted. Before the DE operation for pure tone elimination can be carried out, the accuracy of the mathematical model must be checked using experimental data. The results reveal that the broadband noise has been efficiently reduced using the three-fin-chamber muffler. Consequently, a successful approach in eliminating a pure tone using optimally shaped three-fin-chamber mufflers and a differential evolution method within a constrained space has been demonstrated.

A differential evolution algorithm with intersect mutation operator

Determining the optimal location of wells with the aid of an automated search algorithm is a significant and difficult step in the reservoir development process. It is a computationally intensive task due to the large number of simulation runs required. Therefore,the key issue to such automatic optimization is development of algorithms that can find acceptable solutions with a minimum number of function evaluations. In this study, the Differential Evolution (DE) algorithm is applied for the determination of optimal well locations. DE is a stochastic optimization algorithm that uses a population of solutions which evolve through generations to reach the global optimum. To investigate the performance of this algorithm, three example cases are considered which vary in dimension and complexity of the reservoir model. For each case, both DE algorithm and the widely used Genetic Algorithm (GA) are applied to maximize a Modified Net Present Value (MNPV) as the objective function. It is shown that DE outperforms GA in all cases considered, though the relative advantage of the DE vary from case to case. These results are very promising and demonstrate the applicability of DE for this challenging problem.

Differential evolution (DE) algorithm is a global optimization algorithm over continuous search space. DE also has been applied in many fields, such as artificial neural networks, chemical engineering, mechanical design, robotics, signal processing, biological information, and economics. At the same time, as a powerful evolutionary algorithm for solving global numerical optimization problems, the DE algorithm has drawn more and more attention. However, how to make a proper balance between the global and local search is a burning question and to limit the optimization performance of DE. In this paper, an improved algorithm η_CODE with a new η_Cauchy operator is proposed to enhance the global and local search ability of a well-known DE variant JADE. In order to guarantee the effective performance of the proposed operator, all the fitness values are ranked through a ranking scheme based on increasing order before a new η_Cauchy operator is conducted. The pNP individuals that have better fitness are selected and carried out Cauchy disturbance operation considering the complexity of the algorithm. The Dynamic parameter mechanism is utilized to select pNP individuals that number is also adjusted dynamically in each generation. The scale factor F and crossover probability CR are obtained with Lehmer mean without using determined parameter c in JADE, which aims to balance the exploration and exploitation of the algorithm during the running time. A total of sixty benchmark functions from CEC2014 and CEC2017 on real parameter optimization are employed to prove the validity of η_CODE for solving complex high-dimensional problems. The experiments indicate that η_CODE is better than or at least comparable with several state-of-the-art DE variants, including JADE, SinDE, TSDE, AGDE, and EFADE in the global numerical optimization problems. In order to further analyze the performance of η_CODE, we also select extra two high-powered modified algorithms called EBLSHADE and LSHADESPACMA based on LSHADE to discuss advantages and disadvantages of the proposed algorithm.

Differential Evolution (DE) is widely recognized as a highly effective evolutionary algorithm for global optimization. It has proven its efficacy in tackling diverse problems across various fields and real-world applications. DE boasts several advantages, such as ease of implementation, reliability, speed, and adaptability. However, DE does have certain limitations, such as suboptimal solution exploitation and challenging parameter tuning. To address these challenges, this research paper introduces a novel algorithm called Enhanced Binary JADE (EBJADE), which combines differential evolution with multi-population and elites regeneration. The primary innovation of this paper lies in the introduction of strategy with enhanced exploitation capabilities. This strategy is based on utilizing the sorting of three vectors from the current generation to perturb the target vector. By introducing directional differences, guiding the search towards improved solutions. Additionally, this study adopts a multi-population method with a rewarding subpopulation to dynamically adjust the allocation of two different mutation strategies. Finally, the paper incorporates the sampling concept of elite individuals from the Estimation of Distribution Algorithm (EDA) to regenerate new solutions through the selection process in DE. Experimental results, using the CEC2014 benchmark tests, demonstrate the strong competitiveness and superior performance of the proposed algorithm.

Differential evolution (DE) is a well-known evolutionary algorithm which has been successfully applied in many scientific and engineering fields. In most DE algorithms, the base and difference vectors for mutation are randomly selected from the current population. That is, the useful population information cannot be fully exploited to guide the search of DE through mutation. Furthermore, the selection of parents in mutation has been verified to be critical for the DE performance. Therefore, to alleviate this drawback and improve the performance of DE, a novel DE algorithm with a directional mutation based on cellular topology is proposed in this study. This proposed algorithm is named as Cellular Direction Information based DE (DE-CDI). In DE-CDI, the cellular topology is employed first to define a neighborhood for each individual of population and then the direction information based on the neighborhood is incorporated into the mutation operator. In this way, DE-CDI not only utilizes the neighborhood information to exploit the regions of better individuals and accelerate convergence, but also introduces the direction information to guide the search to the promising area. To evaluate the performance of the proposed method, DE-CDI is applied to the original DE algorithms, as well as several advanced DE variants. Experimental results demonstrate the high performance of DE-CDI for most DE algorithms studied.

Hybrid metaheuristic algorithms have become popular for solving complex problems that are very challenging to overcome with conventional methods in recent years. This paper presents a hybrid algorithm called DE-ACO that combines Differential Evolution (DE) and Ant Colony Optimization (ACO) algorithms. The main idea is to use the Differential Evolution (DE) algorithm for a good starting point for Ant Colony Optimization (ACO) algorithm. A benchmark of six well-known test functions is employed to check the performances of the proposed approach in terms of convergence rate, quality of optimum solutions and computing time. The results obtained show that the performances of the hybrid algorithm outperform significantly the DE and ACO algorithms.