Single-Machine Scheduling Problems with General Learning Effects and Deterioration Jobs

Hybrid flow shop scheduling problems have gained an increasing attention in recent years because of its wide applications in real-world production systems. Most of the prior studies assume that the processing time of jobs is deterministic and constant. In practice, jobs’ processing time is usually difficult to be exactly known in advance and can be influenced by many factors, e.g., machines’ abrasion and jobs’ feature, thereby leading to their uncertain and variable processing time. In this paper, a dual-objective stochastic hybrid flow shop deteriorating scheduling problem is presented with the goal to minimize makespan and total tardiness. In the formulated problem, the normal processing time of jobs follows a known stochastic distribution, and their actual processing time is a linear function of their start time. In order to solve it effectively, this paper develops a hybrid multiobjective optimization algorithm that maintains two populations executing the global search in the whole solution space and the local search in promising regions, respectively. An information sharing mechanism and resource allocating method are designed to enhance its exploration and exploitation ability. The simulation experiments are carried out on a set of instances, and several classical algorithms are chosen as its peers for comparison. The results demonstrate that the proposed algorithm has a great advantage in dealing with the investigated problem.

Recently, learning scheduling problems have received increasing attention. However, the majority of the research assume that the actual job processing time is a function of its position. This paper deals with the single-machine scheduling problem with a sum-of-processing-time-based learning effect. By the effect of sum-of-processing-time-based learning, we mean that the processing time of a job is defined by total normal processing time of jobs in front of it in the sequence. We show that the single-machine makespan problem remains polynomially solvable under the proposed model. We show that the total completion time minimization problem for a≥1 remains polynomially solvable under the proposed model. For the case of 0<a<1, we show that an optimal schedule of the total completion time minimization problem is V-shaped with respect to normal job processing times.

Single-machine scheduling with general sum-of-processing-time-based and position-based learning effects

A single machine scheduling problem for jobs with stochastic processing time is considered in this study. Shortest processing time (SPT) sequencing according to the expected processing times of jobs is optimal for schedules with minimal expected mean flow time when all the jobs arrive to be scheduled and their expected processing times are known. However, SPT sequencing according to the expected processing time may not be optimal for the minimization of the mean flow time when the actual processing times of jobs are known. This study evaluates the complexity of SPT sequencing through a comparison of the mean flow times of schedules based on the expected processing times and actual processing times of randomly generated jobs. Evaluation results show that SPT sequencing according to the expected flow time exhibits chaotic variation to the optimal mean flow time. The relative deviation from the optimal mean flow time increases as the number of jobs, processing time, or coefficient of variation increases.

This paper presents a makespan minimization of -jobs -machines re-entrant flow shop scheduling problem (RFSP) under fuzzy uncertainties using Genetic Algorithm. The RFSP objective is formulated as a mathematical programme constrained by number of jobs and resources availability with traditional scheduling policies of First Come First Serve (FCFS) and the First Buffer First Serve (FBFS). Jobs processing times were specified by fuzzy numbers and modelled using triangular membership function representations. The modified centroid defuzzification technique was used at different alpha-cuts to obtain fuzzy processing times (FPT) of jobs to explore the importance of uncertainty. The traditional GA schemes and operators were used together with roulette wheel algorithm without elitism in the selection process based on job fuzzy completion times. A test problem of five jobs with specified Job Processing and Transit Times between service centres, Job Start Times and Job Due times was posed. Results obtained using the deterministic and fuzzy processing times were compared for the two different scheduling policies, FCFS and FBFS. The deterministic optimal makespan for FBFS schedule was 61.2% in excess of the FCFS policy schedule.  The results also show that schedules with fuzzy uncertainty processing times provides shorter makespans than those for deterministic processing times and those under FCFS performing better than those under FBFS policy for early jobs while on the long run the FBFS policy performs better. The results underscore the need to take account of comprehensive fuzzy uncertainties in job processing times as a trade-off between time and costs influenced by production makespan. http://dx.doi.org/10.4314/njt.v36i3.21

The LPT heuristic for minimizing total load on a proportionate openshop

The deployment of new 5G services and future demands for 6G make it necessary to increase the performance of access networks. This challenge has prompted the development of new standardization proposals for Passive Optical access Networks (PONs) that offer greater bandwidth, greater reach and a higher rate of aggregation of users per fiber, being Time- and Wavelength-Division Multiplexing (TWDM) a promising technological solution for increasing the capacity by up to 40 Gbps by using several wavelengths. This solution introduces tunable transceivers into the Optical Network Units (ONUs) for switching from one wavelength to the other, thus addressing the ever-increasing bandwidth demands in residential broadband and mobile fronthaul networks based on Fiber to the Home (FTTH) technology. This adds complexity and sources of inefficiency, such as the laser tuning time (LTT) delay, which is often ignored when evaluating the performance of Dynamic Bandwidth Allocation (DBA) mechanisms. We present a novel DBA algorithm that dynamically handles the allocation of bandwidth and switches the ONUs’ lasers from one wavelength to the other while taking LTT into consideration. To optimize the packet delay, we introduce a scheduling mechanism that follows the Longest Processing Time first (LPT) scheduling discipline, which is implemented over the Interleaved Polling with Adaptive Cycle Time (IPACT) DBA. We also provide quality of service (QoS) differentiation by introducing the Max-Min Weighted Fair Share Queuing principle (WFQ) into the algorithm. The performance of our algorithm is evaluated through simulations against the original IPACT algorithm, which we have extended to support multi-wavelengths. With the introduction of LPT, we obtain an improved performance of up to 73% reduction in queue delay over IPACT while achieving QoS differentiation with WFQ.

This paper addresses the problem of makespan minimization on unrelated parallel machines with sequence dependent setup times. The symbiotic organisms search (SOS) algorithm is a new and popular global optimization technique that has received wide acceptance in recent years from researchers in continuous and discrete optimization domains. An improved SOS algorithm is developed to solve the parallel machine scheduling problem. Since the standard SOS algorithm was originally developed to solve continuous optimization problems, a new solution representation and decoding procedure is designed to make the SOS algorithm suitable for the unrelated parallel machine scheduling problem (UPMSP). Similarly, to enhance the solution quality of the SOS algorithm, an iterated local search strategy based on combining variable numbers of insertion and swap moves is incorporated into the SOS algorithm. More so, to further improve the SOS optimization speed and performance, the longest processing time first (LPT) rule is used to design a machine assignment heuristic that assigns processing machines to jobs based on the machine dynamic load-balancing mechanism. Subsequently, the machine assignment scheme is incorporated into SOS algorithms and used to solve the UPMSP. The performances of the proposed methods are evaluated by comparing their solutions with other existing techniques from the literature. A number of statistical tests were also conducted to determine the variations in performance for each of the techniques. The experimental results showed that the SOS with LPT (SOS-LPT) heuristic has the best performance compared to other tested method, which is closely followed by SOS algorithm, indicating that the two proposed algorithms’ solution approaches are reasonable and effective for solving large-scale UPMSPs.

Scheduling with controllable release dates and processing times: Total completion time minimization

Single machine scheduling with common due date and controllable processing times

In this paper we consider the single machine scheduling problems with sum-of-logarithm-processing-times based and position based learning effects, i.e., the actual job processing time of a job is a function of the sum of the logarithms of the processing times of the jobs already processed and its position in a sequence. The logarithm function is used to model the phenomenon that learning as a human activity is subject to the law of diminishing return. We show that even with the introduction of the proposed model to job processing times, several single machine problems remain polynomially solvable.

We consider a batch processing system {pi : i = 1, 2,..., n} where pi is the processing time of job i, and up to B jobs can be processed together such that the handling time of a batch is the longest processing time among jobs in the batch. The number of job types m is not fixed and all the jobs are released at the same time. Jobs are executed nonpreemptively. Our objective is to assign jobs to batches and sequence the batches so as to minimize the total completion time. The best previously known result is a 2-approximation algorithm due to D. S. Hochbaum and D. Landy [6]. In this paper, we establish the first polynomial time approximation scheme (PTAS) for the problem.

One of the most common objectives in single-machine scheduling problems is the minimisation of total tardiness. Due to the non-deterministic polynomial-time hard nature of this problem, different heuristic and metaheuristic algorithms have been employed to solve it. In this article, an integer programming model with non-monotonic time-dependent job processing times is developed in which deterioration and learning considerations are incorporated simultaneously. A hybrid genetic algorithm-tabu search (GA-TS) approach is employed to solve the problem. Also, to improve the performance of the GA, Taguchi method is used for parameter tuning. Lastly, in an attempt to validate the proposed model, different test problems are generated randomly and solved by both the hybrid GA-TS and an optimisation software, and thereafter a comparison is performed between the results obtained by them. According to the results, the developed approach has potential to yield near-optimum solutions in large-sized problems. To the best of our knowledge, this is the first study that considers non-monotonic time-dependent processing times, deterioration and learning effect simultaneously in a single-machine scheduling problem with the objective of total tardiness minimisation.

An uncertain single machine scheduling problem with periodic maintenance

Objectives: In this paper, we consider the Flexible Flowshop Scheduling (FFS) problem with parallel machines. The main objective of this paper is to obtain a good schedule of jobs to minimize the makespan of FFS problem. Methods/Statistical analysis: In this study, two heuristic algorithms have been developed of FFS to reduce the makespan. First, we constructed the new heuristic algorithm based on Minimum Processing Time Selective Approach (MPTSA) and Longest Processing Times (LPT) approach to find the optimal or near optimal sequence for minimization of makespan of FFS problem with parallel machines. Next, we developed the heuristic algorithm using PALMER approach. In the PALMER approach we sequence the jobs based on Longest Slope Value (LSV) and obtained the value of objective function. Findings: We compared both the heuristic algorithms with the help of numerical illustrations. We solved the same numerical by both the heuristic algorithm and result show that our constructed heuristic algorithm has resulted in a better industrial production makespan. The percentage improvement of our constructive heuristic algorithm is also calculated. Gantt chart is also generated to verify the effectiveness of constructed heuristic algorithm. Application/Improvements: Our constructed heuristic algorithm is more effective to reduced the makespan of FFS problems as compare to classic heuristic algorithm as Palmer approach and provide an important tool for decision makers in production management. Keywords: Flexible Flowshop Scheduling, Gantt Chart, LPT Approach, Makespan, MPTSA Approach, Parallel Machines, Percentage Improvement