Task-Related Component Analysis Combining Paired Character Decoding for Miniature Asymmetric Visual Evoked Potentials.

Recently, brain-computer interface (BCI) systems developed based on steady-state visual evoked potential (SSVEP) have attracted much attention due to their high information transfer rate (ITR) and increasing number of targets. However, SSVEP-based methods can be improved in terms of their accuracy and target detection time. We propose a new method based on canonical correlation analysis (CCA) to integrate subject-specific models and subject-independent information and enhance BCI performance. We propose to use training data of other subjects to optimize hyperparameters for CCA-based model of a specific subject. An ensemble version of the proposed method is also developed for a fair comparison with ensemble task-related component analysis (TRCA). The proposed method is compared with TRCA and extended CCA methods. A publicly available, 35-subject SSVEP benchmark dataset is used for comparison studies and performance is quantified by classification accuracy and ITR. The ITR of the proposed method is higher than those of TRCA and extended CCA. The proposed method outperforms extended CCA in all conditions and TRCA for time windows greater than 0.3 s. The proposed method also outperforms TRCA when there are limited training blocks and electrodes. This study illustrates that adding subject-independent information to subject-specific models can improve performance of SSVEP-based BCIs.

Steady-state visual evoked potential (SSVEP) serves as one of the extensively utilized paradigms for brain–computer interface (BCI). SSVEP-based BCI has advantages of good classification accuracy, high information transfer rate (ITR), and little user training. However, there exist few studies investigating SSVEP-based BCI in the mobile situation, where electroencephalography (EEG) data are inevitably contaminated by muscle activities, and meanwhile, a limited number of channels are preferred. In this study, two major muscle artifact removal schemes are investigated in the dynamic scenario. One scheme adopts state-of-the-art blind source separation (BSS) methods without electromyogram (EMG) reference, while the other utilizes auxiliary EMG channels as a reference in the denoising process. To evaluate the performance of two schemes, we have tested them on real EEG data collected from ten subjects. The results demonstrate that, in the few-channel condition of SSVEP data, there are classification accuracy improvements of 9.93% for the canonical correlation analysis (CCA) indicator and 15.72% for the task-related component analysis (TRCA) indicator after processed by recursive least-squares (RLS) filtering with auxiliary EMG, and in the single-channel condition, there are classification accuracy improvements of 22.00% for the CCA indicator and 24.42% for the TRCA indicator after RLS filtering, averaged across all the subjects and data lengths. However, the BSS-based methods fail to improve the classification accuracies of SSVEP. Thus, it is of necessity to mount additional EMG channels for effective muscle activity suppression. This study provides an insightful suggestion for future real-life BCI applications.

A brain-computer interface (BCI) provides a direct communication channel between a brain and an external device. Steady-state visual evoked potential based BCI (SSVEP-BCI) has received increasing attention due to its high information transfer rate, which is accomplished by individual calibration for frequency recognition. Task-related component analysis (TRCA) is a recent and state-of-the-art method for individually calibrated SSVEP-BCIs. However, in TRCA, the spatial filter learned from each stimulus may be redundant and temporal information is not fully utilized. To address this issue, this paper proposes a novel method, i.e., task-discriminant component analysis (TDCA), to further improve the performance of individually calibrated SSVEP-BCI. The performance of TDCA was evaluated by two publicly available benchmark datasets, and the results demonstrated that TDCA outperformed ensemble TRCA and other competing methods by a significant margin. An offline and online experiment testing 12 subjects further validated the effectiveness of TDCA. The present study provides a new perspective for designing decoding methods in individually calibrated SSVEP-BCI and presents insight for its implementation in high-speed brain speller applications.

Brain–computer interfaces (BCIs) based on steady-state visually evoked potentials (SSVEPs) have been well researched due to their easy system configuration, little or no user training and high information transfer rates. To elicit an SSVEP, a repetitive visual stimulus (RVS) is presented to the user. The properties of this RVS (e.g., frequency, luminance) have a significant influence on the BCI performance and user comfort. Several studies in this area in the last one-and-half decades have focused on evaluating different stimulus parameters (i.e., properties). However, there is little research on the synthesis of the existing studies, as the last review on the subject was published in 2010. Consequently, we conducted a scoping review of related studies on the influence of stimulus parameters on SSVEP response and user comfort, analyzed them and summarized the findings considering the physiological and neurological processes associated with BCI performance. In the review, we found that stimulus type, frequency, color contrast, luminance contrast and size/shape of the retinal image are the most important stimulus properties that influence SSVEP response. Regarding stimulus type, frequency and luminance, there is a trade-off between the best SSVEP response quality and visual comfort. Finally, since there is no unified measuring method for visual comfort and a lack of differentiation in the high-frequency band, we proposed a measuring method and a division of the band. In summary, the review highlights which stimulus properties are important to consider when designing SSVEP BCIs. It can be used as a reference point for future research in BCI, as it will help researchers to optimize the design of their SSVEP stimuli.

Estimating and approaching the maximum information rate of noninvasive visual brain-computer interface

A high-ITR SSVEP-based BCI speller

Objective. Brain–computer interface (BCI) technologies have been intensely studied to provide alternative communication tools entirely independent of neuromuscular activities. Current BCI technologies use electroencephalogram (EEG) acquisition methods that require unpleasant gel injections, impractical preparations and clean-up procedures. The next generation of BCI technologies requires practical, user-friendly, nonintrusive EEG platforms in order to facilitate the application of laboratory work in real-world settings. Approach. A capacitive electrode that does not require an electrolytic gel or direct electrode–scalp contact is a potential alternative to the conventional wet electrode in future BCI systems. We have proposed a new capacitive EEG electrode that contains a conductive polymer-sensing surface, which enhances electrode performance. This paper presents results from five subjects who exhibited visual or auditory steady-state responses according to BCI using these new capacitive electrodes. The steady-state visual evoked potential (SSVEP) spelling system and the auditory steady-state response (ASSR) binary decision system were employed. Main results. Offline tests demonstrated BCI performance high enough to be used in a BCI system (accuracy: 95.2%, ITR: 19.91 bpm for SSVEP BCI (6 s), accuracy: 82.6%, ITR: 1.48 bpm for ASSR BCI (14 s)) with the analysis time being slightly longer than that when wet electrodes were employed with the same BCI system (accuracy: 91.2%, ITR: 25.79 bpm for SSVEP BCI (4 s), accuracy: 81.3%, ITR: 1.57 bpm for ASSR BCI (12 s)). Subjects performed online BCI under the SSVEP paradigm in copy spelling mode and under the ASSR paradigm in selective attention mode with a mean information transfer rate (ITR) of 17.78 ± 2.08 and 0.7 ± 0.24 bpm, respectively. Significance. The results of these experiments demonstrate the feasibility of using our capacitive EEG electrode in BCI systems. This capacitive electrode may become a flexible and non-intrusive tool fit for various applications in the next generation of BCI technologies.

Motivation moderately influences brain–computer interface (BCI) performance in healthy subjects when monetary reward is used to manipulate extrinsic motivation. However, the motivation of severely paralyzed patients, who are potentially in need for BCI, could mainly be internal and thus, an intrinsic motivator may be more powerful. Also healthy subjects who participate in BCI studies could be internally motivated as they may wish to contribute to research and thus extrinsic motivation by monetary reward would be less important than the content of the study. In this respect, motivation could be defined as “motivation-to-help.” The aim of this study was to investigate, whether subjects with high motivation for helping and who are highly empathic would perform better with a BCI controlled by event-related potentials (P300-BCI). We included N = 20 healthy young participants naïve to BCI and grouped them according to their motivation for participating in a BCI study in a low and highly motivated group. Motivation was further manipulated with interesting or boring presentations about BCI and the possibility to help patients. Motivation for helping did neither influence BCI performance nor the P300 amplitude. Post hoc, subjects were re-grouped according to their ability for perspective taking. We found significantly higher P300 amplitudes on parietal electrodes in participants with a low ability for perspective taking and therefore, lower empathy, as compared to participants with higher empathy. The lack of an effect of motivation on BCI performance contradicts previous findings and thus, requires further investigation. We speculate that subjects with higher empathy who are good perspective takers with regards to patients in potential need of BCI, may be more emotionally involved and therefore, less able to allocate attention on the BCI task at hand.

Brain–computer interfaces (BCIs), also known as brain–machine interfaces (BMIs), translate brain activity into new outputs that replace, restore, enhance, supplement or improve natural brain outputs. BCI research and development has grown rapidly for the past two decades. It is beginning to provide useful communication and control capacities to people with severe neuromuscular disabilities; and it is expanding into new areas such as neurorehabilitation that may greatly increase its clinical impact. At the same time, significant challenges remain, particularly in regard to translating laboratory advances into clinical use.

Brain computer interface using flash onset and offset visual evoked potentials

Steady state visual evoked potential (SSVEP)-based brain-computer interface (BCI) has gained a lot of attention due to its robustness and high information transfer rate (ITR). However, transitioning well-controlled laboratory-oriented BCI demonstrations to real-world applications poses severe challenges for this exciting field. For instance, conducting BCI experiments usually requires skilled technicians to abrade the area of skin underneath each electrode and apply an electrolytic gel or paste to acquire high-quality SSVEPs from hair-covered areas. Our previous proof-of-concept study has proposed an alternative approach that employed electroencephalographic signals collected from easily accessible non-hair-bearing areas including neck, behind the ears, and face to realize an SSVEP-based BCI. The study results showed that, with proper electrode placements and advanced signal-processing algorithms, the SSVEPs measured from non-hair-bearing areas in off-line SSVEP experiments could achieve comparable SNR to that obtained from the hair-bearing occipital areas. This study extended the previous work to systematically investigate the costs and benefits of non-hair SSVEPs. Furthermore, this study developed and evaluated an online BCI system based solely on non-hair EEG signals. A 12-target identification task was employed to quantitatively assess the performance of the online SSVEP-based BCI system. All subjects successfully completed the tasks using non-hair SSVEPs with 84.08 ± 15.60% averaged accuracy and 30.21 ± 10.61 bits/min averaged ITR. The empirical results of this study demonstrated the practicality of implementing an SSVEP-based BCI based on signals from non-hair-bearing areas, significantly improving the feasibility and practicality of real-world BCIs.

A classification algorithm of an SSVEP brain-Computer interface based on CCA fusion wavelet coefficients

Importance of Graphical User Interface in the design of P300 based Brain–Computer Interface systems

A large number of incommensurable metrics are currently used to report the performance of brain-computer interfaces (BCI) used for augmentative and alterative communication (AAC). The lack of standard metrics precludes the comparison of different BCI-based AAC systems, hindering rapid growth and development of this technology. This paper presents a review of the metrics that have been used to report performance of BCIs used for AAC from January 2005 to January 2012. We distinguish between Level 1 metrics used to report performance at the output of the BCI Control Module, which translates brain signals into logical control output, and Level 2 metrics at the Selection Enhancement Module, which translates logical control to semantic control. We recommend that: (1) the commensurate metrics Mutual Information or Information Transfer Rate (ITR) be used to report Level 1 BCI performance, as these metrics represent information throughput, which is of interest in BCIs for AAC; 2) the BCI-Utility metric be used to report Level 2 BCI performance, as it is capable of handling all current methods of improving BCI performance; (3) these metrics should be supplemented by information specific to each unique BCI configuration; and (4) studies involving Selection Enhancement Modules should report performance at both Level 1 and Level 2 in the BCI system. Following these recommendations will enable efficient comparison between both BCI Control and Selection Enhancement Modules, accelerating research and development of BCI-based AAC systems.

Objective. Code-modulated visual evoked potential (c-VEP) based brain–computer interfaces (BCIs) exhibit high encoding efficiency. Nevertheless, the majority of c-VEP based BCIs necessitate an initial training or calibration session, particularly when the number of targets expands, which impedes the practicality. To address this predicament, this study introduces a calibration-free c-VEP based BCI employing narrow-band random sequences. Approach. For the encoding method, a series of random sequences were generated within a specific frequency band. The c-VEP signals were subsequently elicited through the application of on-type grid flashes that were modulated by these sequences. For the calibration-free decoding algorithm, filter-bank canonical correlation analysis (FBCCA) was utilized with the reference templates generated from the original sequences. Thirty-five subjects participated into an online BCI experiment. The performances of c-VEP based BCIs utilizing narrow-band random sequences with frequency bands of 15–25 Hz (NBRS-15) and 8–16 Hz (NBRS-8) were compared with that of a steady-state visual evoked potential (SSVEP) based BCI within a frequency range of 8–15.8 Hz. Main results. The offline analysis results demonstrated a substantial correlation between the c-VEPs and the original narrow-band random sequences. After parameter optimization, the calibration-free system employing the NBRS-15 frequency band achieved an average information transfer rate (ITR) of 78.56 ± 37.03 bits/min, which exhibited no significant difference compared to the performance of the SSVEP based system when utilizing FBCCA. The proposed system achieved an average ITR of 102.1 ± 57.59 bits/min in a simulation of a 1000-target BCI system. Significance. This study introduces a novel calibration-free c-VEP based BCI system employing narrow-band random sequences and shows great potential of the proposed system in achieving a large number of targets and high ITR.