The analysis of basic pharmaceutical compounds by capillary electrochromatography using continuous bed stationary phase

The hydrophilic interaction like properties of some reversed phase high performance liquid chromatography columns in the analysis of basic compounds

Use of nanoparticles in capillary and microchip electrochromatography

Effect of temperature and flow-rate on analysis of basic compounds in high-performance liquid chromatography using a reversed-phase column

The development of sol-gel open-tubular column technology in capillary electrochromatography (CEC) is reviewed. Sol-gel column technology offers a versatile means of creating organic-inorganic hybrid stationary phases. Sol-gel column technology provides a general approach to column fabrication for microseparation techniques including CEC, and is amenable to both open-tubular and monolithic columns. Direct chemical bonding of the stationary phase to the capillary inner walls provides enhanced thermal and solvent stability to sol-gel columns. Sol-gel stationary phases inherently possess higher surface area, and thus provide an effective one-step alternative to conventional open-tubular column technology. Sol-gel column technology is applicable to both silica-based and transition metal oxide-based hybrid stationary phases, and thus, provides a great opportunity to utilize advanced material properties of a wide range of nontraditional stationary phases to achieve enhanced selectivity in analytical microseparations. A wide variety of stationary phase ligands can be chemically immobilized on the capillary inner surface using a single-step sol-gel procedure. Sol-gel chemistry can be applied to design stationary phases with desired chromatographic characteristics, including the possibility of creating columns with either a positive or a negative charge on the stationary phase surface. This provides a new tool to control electroosmotic flow (EOF) in the column. Column efficiencies on the order of half a million theoretical plates per meter have been reported for sol-gel open-tubular CEC columns. The selectivity of sol-gel stationary phases can be easily fine-tuned by adjusting the composition of the coating sol solution. Open-tubular columns have significant advantages over their packed counterparts because of the simplicity in column making and hassle-free fritless operation. Open-tubular CEC columns possess low sample capacity and low detection sensitivity. Full utilization of the analytical potential of sol-gel open-tubular columns will require a concomitant development in the area of high-sensitivity detection technology.

The separation of strongly basic, moderately basic, weakly basic, strongly acidic, moderately acidic, weakly acidic, and neutral compounds in a single run using capillary electrochromatography (CEC) is presented. This is accomplished using a 3-μm CEC Hypersil C8 capillary with high organic content acetonitrile/phosphate (pH 2.5) mobile phases containing hexylamine. Fifteen basic, acidic, and neutral drugs of forensic interest are resolved using a step gradient. Strong and moderately basic drugs separate before t(o), apparently by a combination of free zone electrophoresis (CZE) and chromatographic phenomena. Weak bases separate after t(o), also by a combination of CZE and chromatographic processes. Due to large selectivity differences between CEC and CZE for bases, there is evidence that the stationary phase is playing a significant role in the separation of these solutes. The CEC approach presented offers unique selectivity, expanded peak capacity, and the ability to solubilize both hydrophilic and hydrophobic solutes in an injection solvent that is compatible with the chromatographic system.

Capillary electrochromatography (CEC) has been realised as a combination of high performance liquid chromatography (HPLC) and capillary electrophoresis (CE) allowing the separation of analytes based on their differing adsorption and migration behaviour. There is a considerable interest in developing new methodologies for CEC, which uses chromatographic beads or monoliths as stationary phases or alternatively employs open tubular (OT) capillaries relying on surface modifications. Besides the bulk flat flow profile of the mobile phase in CEC columns allowing an enhanced resolution, due to the influence of the applied electrical field there are other possibilities to provide a higher resolution with better detection. As an additional newly means for peak sharpening and sample enrichment isotachophoresis and a “sweeping mechanism” could be envisaged, which both take advantage of the inhomogeneous electric field pattern in the capillary by choosing appropriate leading and terminating background electrolytes (BGEs). Transient isotachophoresis would be another technique to provide an increased plate height in the separations, using an optimized sample matrix, e.g. containing a relatively high acetonitrile content, with the same leading and terminating BGEs. In this thesis, a new method to generate a “sharpening zone”, which is similar to the concept of transient isotachophoresis, was established using an aqueous sample matrix containing an organic solvent. Target analytes within this zone could be concentrated whilst they migrated through the capillary. A novel technique was developed that used the sharpening zone for sweeping and concentrating several unresolved analyte peaks allowing an enhanced peak resolution. As the aim was to concentrate only some part of the analyte zone containing compounds of interest, the position and width of the sharpening zone needed to be well controlled. Various techniques to tune the width and position of the sharpening zone were thus developed, involving modifying the organic modifier content in the BGE, applying pressure additionally to the electroosmotic flow (EOF) and modifying the inner surface of the capillaries. This work also critically evaluated some related existing knowledge and theoretical approaches in CEC including the concept of tuneable system eigenpeaks (noncomigrating or ghost peaks caused by waves of an electric field in the capillary). Although peak broadening caused by eigenpeaks (which often suppresses resolution in CEC) has been well described for aqueous or pure non-aqueous BGEs, a systematic study of eigenmobility in aqueous/acetonitrile BGEs had not been reported. The experiments related to the eigenmobility led to a new approach to tune the eigenpeak position in chromatograms whereby a selective sample peak sharpening mechanism was elaborated using the sharpening zone. The novel approach was demonstrated for the separation of various peptides in the CE mode and for the resolution of incompletely resolved chiral amino acids in CEC. These investigations furthermore led to the development of an appropriate stationary phase, which was produced using techniques for an in-column synthesis of a molecular imprinted polymer (MIP). Well prepared MIPs are capable of specifically enhancing the retention of target analytes, herein focusing on enantio-selective isolation of chiral molecules. Since such a MIP was rather rigid, which often caused capillary clogging when used as a conventional monolithic stationary phase, this MIP was incorporated into porous layer open tubular (PLOT) capillaries. Numerous experimental difficulties were overcome with respect to the vinylisation of long fused-silica capillaries and for the polymerisation of the MIP within using thermal- and photo-polymerisations. A method for the characterization of such MIP-PLOT capillaries was elaborated involving the Langmuir adsorption theory. The new columns were evaluated using chromatography, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and CEC analysis. All experiments were designed according to the principles of Green Chemistry. These concepts involved the use of small scale analysis, simulation studies reducing the number of performed experiments, systematic studies with low amounts of solvents and materials, and optimisation of synthesis methods to reduce time, energy and reagent consumption. The theories, methods and results presented in this thesis will, in the future, allow further targeted developments of novel analytical tools for a green, sensitive, selective and improved resolution analysis of chemical and biological compounds including chiral compounds, peptides and proteins.

Chiral drugs exert pharmacological effects through strict matching with chiral biological macromolecules and chiral recognition. Each enantiomer has different pharmacological activities, metabolic processes and rates, as well as toxicity pharmacokinetic characteristics owing to the difference in its interactions with the chiral environment. Therefore, method development for the resolution of chiral drugs is of great significance for the synthesis of chiral drugs and for quality control during the production process. Molecularly imprinted polymers (MIPs) are prepared by using a target molecule as the template. MIPs demonstrate highly specific recognition properties toward the target molecule since they have specific spatial molecular structures and functional groups. Hence, MIPs are particularly suitable for the separation and purification of chiral drugs. Capillary electrochromatography (CEC) offers the advantages of high separation efficiency and high selectivity owing to the dual separation mechanisms including capillary electrophoresis and liquid chromatography. By using MIPs as the stationary phases for CEC, the advantages of the two technologies can be combined to achieve efficient separation of chiral drugs. MIPs were first applied to CEC for chiral resolution in 1994, and since then, there have been notable advances in this field. The four main chiral separation modes in CEC involve the use of MIPs as the stationary phases of open tubular, packed, and monolithic columns, and as the pseudostationary phase in the separation medium. This review summarizes the research progress of these four methods and reveals the potential of MIPs in chiral resolution by CEC. The advantages and disadvantages of these methods are commented. MIPs as the stationary phases of packed columns can allow for chiral separation. However, the preparation of packed columns in narrow capillaries is difficult. In addition, frits must be prepared at the ends of the capillaries to seal the MIPs. The frits lead to the formation of bubbles during the CEC analysis, thus resulting in poor repeatability and stability. These problems can be overcome by using MIP-based open tubular columns. Furthermore, conditioning of open tubular columns is easy and less time-consuming. However, open tubular columns have limited capacity. MIP-based monolithic columns have greater capacity than do open tubular columns, and frits are not required in this case. However, in situ preparation of MIPs monolith in narrow capillaries is still challenging. The application of MIPs to chiral CEC can also be realized by using them as pseudostationary phases (additives) in the separation medium, and this allows for ease of operation. Moreover, the amount of MIPs introduced into the capillary can be accurately controlled. Thus, the batch-to-batch reproducibility can be improved, but this has the disadvantage of increased MIP consumption. In order to further expand the potential of MIPs in chiral CEC, the following aspects must be considered. First, improvement of the preparation method. In most reported MIP-based-chiral CEC techniques, the peaks of the imprinted molecules show severe tailing, and this problem must be resolved. Improving the mass transfer rate of the prepared MIPs may be a suitable solution in this regard. Second, development of new functional monomers. A functional monomer is an indispensable component in the preparation of MIPs. New functional monomers can be prepared according to the "three-point interaction" rule. Third, selection of template molecules. A single enantiomer of chiral drugs is used as the template molecule to prepare chiral MIPs. The method is not suitable for the preparation of MIPs of chiral drugs for which a single enantiomer is difficult to obtain. Therefore, appropriate choice of the template molecules for these drugs is imperative. Fourth, discussion of chiral separation mechanism. The mechanism of interaction between the template molecules and MIPs needs to be explored further, in order to obtain theoretical guidance for the design and preparation of chiral MIPs.

Separation of basic compounds by capillary electrochromatography on an X-Terra RP18 ® stationary phase

Separation of basic compounds by capillary electrochromatography on an X-Terra RP18® stationary phase

Two novel types of crown ether capped β-cyclodextrin (β-CD) bonded silica, namely, 4′-aminobenzo-X-crown-Y (X=15, 18 and Y=5, 6, resp.) capped [3-(2-O-β-cyclodextrin)-2-hydroxypropoxy] propylsilyl-appended silica, have been prepared and used as stationary phases in capillary electrochromatography (CEC) to separate chiral compounds. The two stationary phases have a chiral selector with two recognition sites: crown ether and β-CD. They exhibit excellent enantioselectivity in CEC for a wide range of compounds. After inclusion of metal ions (Na+ or K+) from the running buffer into the crown ether units, the stationary phases become positively charged and can provide extra electrostatic interaction with ionizable solutes and enhance the dipolar interaction with polar neutral solutes. This enhances the host-guest interaction with the solute and improves chiral recognition and enantioselectivity. Due to the cooperation of the anchored β-CD and the crown ether, this kind of crown ether capped β-CD bonded phase shows better enantioselectivity than either β-CD- or crown ether bonded phases only. These new types of stationary phases have good potential for fast chiral separation with CEC.

Capillary columns with in situ formed porous monolithic packing for micro high-performance liquid chromatography and capillary electrochromatography

The operational parameters and factors which control the performance of capillary electrochromatography (CEC) using commercially available CEC instrumentation are evaluated and discussed. The CEC of neutral or ion-suppressed acidic analytes shows marked advantages such as increased column efficiency and reduced analysis times compared to conventional high-performance liquid chromatography (HPLC). Development of the CEC method using C-18 stationary phases follows similar guidelines to that of HPLC and, due to the high efficiencies obtained, the time required for method development can be substantially reduced. The technique of CEC is extremely attractive for the analysis of pharmaceuticals due to its excellent quantitative characteristics: good repeatability, reproducibility, wide UV detector linearity, and excellent detection limits. The analysis of acidic and neutral analytes by CEC using reverse-phase material is highly successful. However, in order to analyze highly basic analytes a strong cation exchange stationary phase is needed. This phase can produce staggering and as yet unexplained “apparent” efficiencies of over 40×106 plates per meter; however, to-date these results are highly non-reproducible. The application of CEC to the pharmaceutical industry has been demonstrated in the analysis of a wide range of structurally diverse pharmaceutical compounds using capillaries packed with reverse-phase materials. © 1997 John Wiley & Sons, Inc. J Micro Sep9: 373–387, 1997

Validation and robustness testing of a CEC method used to determine impurities in a pharmaceutically active compound

In situ time-resolved fluorescence spectroscopy for capillary electrochromatography (CEC) is described in the frequency domain. Fluorescence decay of the solute molecules is collected directly in the packed stationary phase of the CEC capillary. The fluorescence lifetime profile of the solute molecules reveals the microenvironments they experience in the C18 chromatographic interface. A quartz flow cell and experimental optimization of the signal-to-noise ratio are described that enable the collection of high-quality decay data and subsequent calculation of fluorescence lifetime profiles of the solute molecules. The distribution of pyrene (PY), 1-pyrenemethanol (PY-MeOH), and 1-pyrenebutanol (PY-BuOH) into the C18 stationary phase and the solute-C18 phase interactions are probed, under separation conditions for CEC. All three molecules display a Gaussian distribution of lifetimes, consistent with an ensemble of heterogeneous microenvironments in the C18 stationary phase. The least polar molecule PY diffuses deeply into and interacts extensively with the C18 phase, experiencing high hydrophobicity and significant heterogeneity of microenvironments. The retention order of PY-MeOH, PY-BuOH, and PY in CEC is determined by their interactions with the stationary phase, revealed by their fluorescence lifetime distributions.

Capillary electrochromatography synergistic enantioseparation system for racemate malic acid based on a novel nanomaterial synthesized by chiral molecularly imprinted polymer and chiral metal-organic framework