Topology optimization using a natural neighbour meshless method combined with a bi-directional evolutionary algorithm

In this work it is study how the remaining coronal dentin and type of rehabilitation influences the strain, the stress distribution, and the fracture resistance of restored teeth. Thus, an advance discretization numerical technique — a meshless method — is used to analyse the effects of the rehabilitation technical solutions on the biomechanical behaviour of restored teeth. The meshless method used in this work is the Natural Neighbour Radial Point Interpolation Method (NNRPIM). Within the NNRPIM, the Natural Neighbour concept is used in order to enforce the nodal connectivity and to construct a node-depending background mesh. The NNRPIM interpolation functions possess the delta Kronecker property, which simplify the imposition of the natural and essential boundary condition. The objective of this work is to extend and validate the NNRPIM to the elasto-static numerical analysis of restored maxillary molar. Several numerical examples are analysed and the obtained results are compared with clinical cases.

Cellular solid materials are progressively becoming more predominant in lightweight structural applications as more technologies realize these materials can be improved in terms of performance, quality control, repeatability and production costs, when allied with fast developing manufacturing technologies such as Additive Manufacturing. In parallel, the rapid advances in computational power and the use of new numerical methods, such as Meshless Methods, in addition to the Finite Element Method (FEM) are highly beneficial and allow for more accurate studies of a wide range of topologies associated with the architecture of cellular solid materials. Since these materials are commonly used as the cores of sandwich panels, in this work, two different topologies were designed — conventional honeycombs and re-entrant honeycombs — for 7 different values of relative density, and tested on the linear-elastic domain, in both in-plane directions, using the Natural Neighbor Radial Point Interpolation Method (NNRPIM), a newly developed meshless method, and the Finite Element Method (FEM) for comparison purposes.

In this work, a novel anisotropic material law for the mechanical behaviour of the bone tissue is proposed. This new law, based on experimental data, permits to correlate the bone apparent density with the obtained level of stress. Combined with the proposed material law, a biomechanical model for predicting bone density distribution was developed, based on the assumption that the bone structure is a gradually self-optimising anisotropic biological material that maximises its own structural stiffness. The strain and the stress field required in the iterative remodelling process are obtained by means of an accurate meshless method, the Natural Neighbour Radial Point Interpolation Method (NNRPIM). Comparing with other numerical approaches, the inclusion of the NNRPIM presents numerous advantages such as the high accuracy and the smoother stress and strain field distribution. The natural neighbour concept permits to impose organically the nodal connectivity and facilitates the analysis of convex boundaries and extremely irregular meshes. The viability and efficiency of the model were tested on several trabecular benchmark patch examples. The results show that the pattern of the local bone apparent density distribution and the anisotropic bone behaviour predicted by the model for the microscale analysis are in good agreement with the expected structural architecture and bone apparent density distribution.

Throughout the years, the health of the mouth and the smile have gain an increasing importance, due to the fact that is one of the most important communication skills of a person. Yet, dental implant treatments offers a solution that may generate more satisfactory outcomes for patients who are not able to adapt to conventional dentures or who have already compromised local host bone. In this work, advanced discretization numerical techniques were used, more specifically, the Natural Neighbor Radial Point Interpolation Method (NNRPIM) and the Radial Point Interpolation Method (RPIM), and also the Finite Element Method (FEM). The main goal of this work is to understand the mechanical behavior of zirconia implants and the bone response in the presence of such implants and also, compare the three numerical methods used in this work, FEM, RPIM and NNRPIM. The results obtained show that meshless methods are capable to produce more accurate and smooth displacement and stress fields when compared to finite element technique.

A meshless study of antisymmetric angle-ply laminates using high-order shear deformation theories

Bone remodeling remains a highly researched topic investigated by many strands of science. The main purpose of this work is formulating a new computational framework for biological simulation, extending the version of the bone remodeling model previously proposed by Komarova. Thus, considering only the biological aspect of the remodeling process, the action of osteoclasts and osteoblasts is taken into account as well as its impact on bone mass. It is conducted a spatiotemporal analysis of a remodeling cycle obtaining a dynamic behavior of bone cells very similar to the biological process already described in the literature. The numerical example used is based on bone images obtained with scanning electron microscopy. During simulation, it is possible to observe the variation of bone's architecture through isomaps. These maps are obtained through the combination of biological bone remodeling models with three distinct numerical techniques-finite element method (FEM), radial point interpolation method (RPIM), and natural neighbor radial point interpolation method (NNRPIM). A study combining these numerical techniques allows to compare their performance. Ultimately, this work supports the inclusion of meshless methods due to their smoother results and its easiness to be combined with medical images from CT scans and MRI.

The analysis of laminated plates using distinct advanced discretization meshless techniques

In recent years, additive manufacturing has been gaining ground among traditional manufacturing methods in many different applications. This is mainly due to its ease of prototyping, material savings and above all the highly complex geometries that can be achieved. Despite its many advantages, the use of additive manufacturing in electrical machines has been limited. The lack of maturity of the manufacturing processes and the increase in losses when applying additive approaches to some parts, mainly stators, have led little implementation in the field of electrical machines. The geometric freedom offered by additive manufacturing paves the way for the use of novel optimisation techniques, such as topology optimisation. Traditionally, topology optimisation has not been widely used because the complex geometries obtained by these algorithms are not easily produced by traditional manufacturing methods. However, thanks to additive manufacturing, topology optimisation has started to be used, mainly for mechanical applications and it has demonstrated its ability to reduce weight without compromising mechanical stability in several cases. Nevertheless, topology optimisation for physics other than mechanical has not been thoroughly studied, let alone for the simultaneous optimisation of different physics. In view of the scenario described, this thesis investigates the benefits that additive manufacturing and topology optimisation can bring to the design of electrical machines. For the additive manufacturing of electrical machines, a thorough literature review is carried out on the application of this manufacturing approach to different parts of electrical machines, active and non-active. Two main case studies are presented: in the first, the rotor, the shaft, the stator and the housing of an aerospace actuator are manufactured by L-PBF in FeCoV and the assembled actuator is tested. In the second case, a rotor is manufactured in FeSi by LP- DED. Finally, not considered an additive manufacturing case study itself in this thesis, but two electrical conductor prototypes are manufactured in CuCr1Zr and an additional geometry is manufactured in AlSi10Mg by L-PBF. With regard to topology optimisation of electrical machines, a description of the main topology optimisation methods used is given and their application to electrical machine components is presented. In a similar way to additive manufacturing, two case studies are analysed. First, a novel multiphysics - mechanical and electromagnetic - topology optimisation method is presented, in which the rotor and the stator of a permanent magnet motor are optimised simultaneously. This method is compared with two methods found in the literature, SIMP and on-off. Secondly, another topology optimisation method is described and applied to an electrical conductor model. The proposed algorithm involves a multiphysics - thermal and electromagnetic - hybrid parametric topology optimisation approach. Two reduced length geometries and one full length prototype are built via additive manufacturing. Finally, conclusions regarding additive manufacturing and topology optimisation of electrical machines are drawn from the work presented in this thesis. Future lines of work for additive manufacturing and topology optimisation of electrical machines are also presented.

Aiming at the problems of a low material utilization rate and uneven stress distribution of cast-steel support joints in cable dome structures, topology optimization and additive manufacturing methods are used for optimization design and integrated manufacturing. First, the basic principle and calculation process of topology optimization are briefly introduced. Then, the initial model of the support joint is calculated and analyzed by using the universal software ANSYS Workbench 2020R2 and Altair OptiStruct, and the optimized joint is imported into Discovery Live to smooth the surface. The static behaviors of three types of joints (topology-optimized joints, joints after the smoothing treatment, and joints from practical engineering) are compared and analyzed. Finally, the joints are printed by using fused deposition modeling (FDM) technology and laser-based powder bed fusion (LBPBF) technology in additive manufacturing. The results show that the new support joint in the cable dome structure obtained by the topology optimization method has the advantages of a novel shape, a high material utilization rate, and a uniform stress distribution. Additive manufacturing technology can allow the manufacture of complex shape components with high precision and high speed. The combination of topology optimization and additive manufacturing effectively realizes the advanced design and integrated manufacturing of support joints for cable dome structures.

Random variable of thermo-mechanical coupling (TMC) structure is analyzed first, then the topology optimization model of TMC compliant mechanism is established. According to the uncertainty factors such as temperature, load, volume ratio and thermal expansion coefficient in the process of topology optimization, the robust reliability optimal design method is introduced into the topology optimization process. The various factors on the sensitivity of topology optimization process is analyzed, the best match between various factors is find out, which make the product has robust reliability for the change of the uncertainty. The residual analysis for the most sensitive factors is carried out. Finally the correctness and validity of the method is verified with an example. Introduction When we study the compliant mechanisms by adopting topological optimization method, we only need to give design domain and allocate input and output position, no need from the perspective of a known rigidity. The mechanism come from this method have a input and output relationship of optimized “force—displacement”, thus it attracts people’s attention. Topology optimization research is developing from certain topology optimization direction to reliable topology optimization direction. Jinqing Zhan proposed a reliable topology optimization method of compliant mechanism based on infrastructure method. KHARMANDA proposed a reliable topology optimization method. Zhaokun Li proposed a geometric nonlinear topology optimization research method based on reliable compliant mechanism. Their research turned out that the mechanism based on reliable topology optimization is more reasonable than the mechanism based on certain topology optimization. Yongcong Kuang build a level set function to design variable, stiffness minimization, and proposed corresponding optimization algorithm. Mingtao Cui established a monolithic compliant mechanism multi-target reliable topology optimization design dual mathematical model. This paper combines topology optimization process of compliant mechanism and robust reliability optimal design, analyzes the sensitivity of uncertainty random variables such as design domain’s size, external load and temperature in topology optimization process. Then get the best combination among these random variables. Random Variable Coupling Field Analysis Hot objects will produce thermal expansion, thus caused by the thermal deformation and displacement of combined action of mechanical load and temperature load structure called a hot solid coupling structure, the finite element balance equation :

Topology optimization has been considered as a promising tool for conceptual design due to its capability of generating innovative design candidates without depending on the designer's intuition and experience. Various optimization methods have been developed through the years, and one of the promising options is the level-set-based topology optimization method. The benefit of this alternative method is that the design is characterized by its clear boundaries. This advantage can avoid postprocessing work in conventional topology optimization process to a large extent and realize direct integration between topology optimization and additive manufacturing (AM). In this paper, practical algorithms and a matlab-based open source framework are developed to seamlessly integrate the level-set-based topology optimization procedure with AM process by converting the design to STereoLithography (STL) files, which is the de facto standard format for three-dimensional (3D) printing. The proposed algorithm and code are evaluated by a proof-of-concept demonstration with 3D printing of both single and multimaterial topology optimization results. The algorithm and the open source framework proposed in this paper will be beneficial to the areas of computational design and AM.

According to the requirements of the aerospace industry for high strength, high stiffness, and lightweight structural parts, topology optimization has been proved to be an effective product design method. As one of the most conceptual and prospective structural optimization design methods, topology optimization intends to seek the optimal layout of materials in an allowed design region under a given load and boundary conditions. Thus, the object of study in the article is the method of topological optimization of aircraft structures. The goal of this article is to analyze the existing approaches, algorithms, as well as application of the method of topological optimization in the aerospace field in applied problems. The tasks are to describe the existing various approaches methods, features, and research directions of topological optimization as well as to study the possibility of application in the manufacturing process of composite structures. The following results were obtained. The optimization methods are briefly explained and compared, and the advantages and limitations of each approach are discussed. The various ways of simultaneous optimization of fiber orientation and structural topology were described and analyzed. The features of different methods of continuous fiber orientation optimization method were reviewed. The discrete fiber orientation optimization methods were represented. The possibility of multi-scale concurrent topological optimization was described. The combination of topology optimization and additive manufacturing was considered. Finally, the topology optimization of FRC structures which have been resolved in literature are reviewed and the potential research fields requiring more investigation are pointed out. Conclusions. In the article, a comprehensive review of the topology optimization design of FRC structures was presented. The promising way is to combine topology optimization with additive manufacturing techniques. However, these proposed methods may not suitable for other more complex problems, such as bucking stability and natural frequency. Hence, the topology optimization design of complex FRC components under complicated conditions is the main challenge in the future. This can be a new trend in the topology design of FRC structures.

Overheating is a major issue especially in metal Additive Manufacturing (AM) processes, leading to poor surface quality, lack of dimensional precision, inferior performance and/or build failures. A 3D density-based topology optimization (TO) method is presented which addresses the issue of local overheating during metal AM. This is achieved by integrating a simplified AM thermal model and a thermal constraint within the optimization loop. The simplified model, recently presented in literature, offers significant computational gains while preserving the ability of overheating detection. The novel thermal constraint ensures that the overheating risk of optimized designs is reduced. This is fundamentally different from commonly used geometry-based TO methods which impose a geometric constraint on overhangs. Instead, the proposed approach takes the process physics into account. The proposed method is validated via an experimental comparative study. Optical tomography (OT) is used for in-situ monitoring of process conditions during fabrication and obtained data is used for evaluation of overheating tendencies. The novel TO method is compared with two other methods: standard TO and TO with geometric overhang control. The experimental data reveals that the novel physics-based TO design experienced less overheating during the build as compared to the two classical designs. A study further investigated the correlation between overheating observed by high OT values and the defect of porosity. It shows that overheated regions indeed show higher defect of porosity. This suggests that geometry-based guidelines, although enhance printability, may not be sufficient for eliminating overheating issues and related defects. Instead, the proposed physics-based method is able to deliver efficient designs with reduced risk of overheating.

In the laser powder bed fusion process (PBF-LB), components are built up incrementally by locally melting metal powder with a laser beam. This process leads to inhomogeneous material properties of the manufactured components. By integrating these specific material properties into a topology optimization algorithm, product developers can be supported in the early phases of the product development process, such as design finding. For this purpose, a topology optimization method was developed, which takes the inhomogeneous material properties of components fabricated in the PBF-LB process into account. The complex pore architecture in PBF-LB components was studied with micro-computed tomography (µCT). Thereby, three characteristic regions of different porosity were identified and analyzed. The effective stiffness in each of these regions was determined by means of resonant ultrasonic spectroscopy (RUS) as well as finite element analysis. Afterward, the effective stiffness is iteratively considered in the developed topology optimization method. The resulting design proposals of two optimization cases were analyzed and compared to design proposals derived from a standard topology optimization. To evaluate the developed topology optimization method, the derived design proposals were additionally manufactured in the PBF-LB process, and the characteristic pore architecture was analyzed by means of µCT.

To date the design of structures via topology optimisation methods has mainly focused on single-objective problems. However, real-world design problems usually involve several different objectives, most of which counteract each other. Therefore, designers typically seek a set of Pareto optimal solutions, a solution for which no other solution is better in all objectives, which capture the trade-off between these objectives. This set is known as a smart Pareto set. Currently, only the weighted sums method has been used for generating Pareto fronts with topology optimisation methods. However, the weighted sums method is unable to produce evenly distributed smart Pareto sets. Furthermore, evenly distributed weights have been shown to not produce evenly spaced solutions. Therefore, the weighted sums method is not suitable for generating smart Pareto sets. Recently, the smart normal constraints method has been shown to be capable of directly generating smart Pareto sets. This work presents an updated smart normal constraint method, which is combined with a bi-directional evolutionary structural optimisation algorithm for multi-objective topology optimisation. The smart normal constraints method has been modified by further restricting the feasible design space for each optimisation run such that dominant and redundant points are not found. The algorithm is tested on several different structural optimisation problems. A number of different structural objectives are analysed, namely compliance, dynamic and buckling objectives. Therefore, the method is shown to be capable of solving various types of multi-objective structural optimisation problems. The goal of this work is to show that smart Pareto sets can be produced for complex topology optimisation problems. Furthermore, this research hopes to highlight the gap in the literature of topology optimisation for multi-objective problems.