Transient model parameters identification of transformer based on PSO algorithm

A dynamic adaptive particle swarm optimization and genetic algorithm is presented to solve constrained engineering optimization problems. A dynamic adaptive inertia factor is introduced in the basic particle swarm optimization algorithm to balance the convergence rate and global optima search ability by adaptively adjusting searching velocity during search process. Genetic algorithm–related operators including a selection operator with time-varying selection probability, crossover operator, and n-point random mutation operator are incorporated in the particle swarm optimization algorithm to further exploit optimal solutions generated by the particle swarm optimization algorithm. These operators are used to diversify the swarm and prevent premature convergence. Tests on nine constrained mechanical engineering design optimization problems with different kinds of objective functions, constraints, and design variables in nature demonstrate the superiority of the dynamic adaptive particle swarm optimization and genetic algorithm against several other meta-heuristic algorithms in terms of solution quality, robustness, and convergence rate in most cases.

Collaborative beamforming in wireless sensor networks using a novel particle swarm optimization algorithm variant

The particle swarm optimization (PSO) algorithm presents a new way for finding optimal solutions of complex optimization problems. In this paper a modified particle swarm optimization algorithm is presented. We modify the PSO algorithm in some aspects. Firstly, a contractive factor is introduced to the position update equation, and the particles are limited in search region. A new strategy for updating velocity is then adopted, in which the velocity is weakened linearly. Thirdly, using an idea of intersecting two modified PSO algorithms. Finally, adding an item of integral control in the modified algorithm can improve its global search ability. Based on these strategies, we proposed a new PSO algorithm named crossed PSO algorithm. Simulation results show that the crossed PSO is superior to the original PSO algorithm and can get overall promising performance over a wide range of problems.

Neural Network system for SoC is one topic in the world. Recently, SoC began to combine AI technique by Python. When developers consider Intelligent system on SoC, the co-design software and hardware are significant. In this case, small devices and embedded system are target system. For IoT, those techniques will grow up in the world. Those cases, avoiding premature convergence while keeping performance is a challenge in training the neural network, especially in a case of large NNs or a large number of training data. In this case, one problem is a huge memory and processing power. For tiny memory and processing system as SoC, we propose an improved particle swarm optimization (PSO) algorithm called the PSOseed2 algorithm for training NN. The PSOseed2 algorithm solves the premature convergence of the standard PSO (SPSO) algorithm by slightly modifying the velocity update function without adding many computational tasks to the SPSO algorithm. We evaluated this algorithm on field programmable gate array (FPGA)-based NN and software-based NN and trained these NNs with different PSO algorithms that are SPSO, PSOseed, PSOseed2, and dissipative PSO. Experimental results with different datasets confirmed that the NNs trained by the proposed PSOseed2 algorithm had better recognition rates and lower global learning errors than the NN trained by other PSO algorithms. In this talk, I would like to talk those relational research in the world and our results and discussion.

In this paper, we present a concept of a transistor level implementation of the Particle Swarm Optimization (PSO) algorithm that belongs to the group of unsupervised learning algorithms aimed at the design of artificial neural networks (ANNs). The algorithm exhibits an ability to search for an optimal solution in a multidimensional data space, in which many sub-optimal solutions may exist. The ANN that operates in accordance with the PSO algorithm is composed of a set of cooperating particles (agents) that explore an input data space and communicate information on the best found solution to other particles. The PSO algorithm is usually implemented in software. We in our investigations focus on its transistor level realization. Such an approach enables parallel data processing, in which the overall data rate only moderately depends on the number of particles. Most of the operations and components of such implemented PSO algorithm may be reused considering our former CMOS realizations of other self-organizing learning algorithms. This allowed us to assess main parameters of the PSO.

This article proposes the hybrid Nelder–Mead (NM)–Particle Swarm Optimization (PSO) algorithm based on the NM simplex search method and PSO for the optimization of multimodal functions. The hybrid NM–PSO algorithm is very easy to implement, in practice, since it does not require gradient computation. This hybrid procedure performed the exploration with PSO and the exploitation with the NM simplex search method. In a suite of 17 multi-optima test functions taken from the literature, the computational results via various experimental studies showed that the hybrid NM–PSO approach is superior to the two original search techniques (i.e. NM and PSO) in terms of solution quality and convergence rate. In addition, the presented algorithm is also compared with eight other published methods, such as hybrid genetic algorithm (GA), continuous GA, simulated annealing (SA), and tabu search (TS) by means of a smaller set of test functions. On the whole, the new algorithm is demonstrated to be extremely effective and efficient at locating best-practice optimal solutions for multimodal functions.

In order to solve the problem of interaction between multiple evaluation indexes of seed metering performance under multiple factors of centralized seed feeding device, a multi-objective optimization of structure based on particle swarm optimization (PSO) algorithm was proposed in this paper. The wheat centralized seed feeding device was taken as the research object, and the experimental factors were cone angle of type hole, working speed and seed filling gap. The working process of wheat centralized seed feeding device was simulated by discrete element method (DEM). The average seed number of type hole, the variation coefficient of the average seed number of type hole, and the maximum tangential force between seed and seed feeding mechanism were selected as the evaluation indexes. Through the variance analysis of the evaluation indexes by the experimental factors, the optimization objective function was constructed. Using PSO algorithm, the multi-objective optimization was carried out for the wheat centralized seed feeding device. The optimization results show that the best structural combination parameters of the wheat centralized seed feeding device are the hole cone angle of 31.6° and the seed filling gap of 4.6 mm. The validity of the method was verified by simulation and field test. The results show that the PSO algorithm multi-objective optimization method proposed in this paper can provide a reference for the structural improvement and optimal design of the centralized seed feeding device. Keywords: centralized seed feeding device, multi-objective, optimization, PSO algorithm DOI: 10.25165/j.ijabe.20201306.5665 Citation: Wang Q Q, Li Z D, Wang W W, Zhang C L, Chen L Q, Wan L. Multi-objective optimization design of wheat centralized seed feeding device based on particle swarm optimization (PSO) algorithm. Int J Agric & Biol Eng, 2020; 13(6): 76–84.

PurposeA set of routers that are connected over communication channels can from network-on-chip (NoC). High performance, scalability, modularity and the ability to parallel the structure of the communications are some of its advantages. Because of the growing number of cores of NoC, their arrangement has got more valuable. The mapping action is done based on assigning different functional units to different nodes on the NoC, and the way it is done contains a significant effect on implementation and network power utilization. The NoC mapping issue is one of the NP-hard problems. Therefore, for achieving optimal or near-optimal answers, meta-heuristic algorithms are the perfect choices. The purpose of this paper is to design a novel procedure for mapping process cores for reducing communication delays and cost parameters. A multi-objective particle swarm optimization algorithm standing on crowding distance (MOPSO-CD) has been used for this purpose.Design/methodology/approachIn the proposed approach, in which the two-dimensional mesh topology has been used as base construction, the mapping operation is divided into two stages as follows: allocating the tasks to suitable cores of intellectual property; and plotting the map of these cores in a specific tile on the platform of NoC.FindingsThe proposed method has dramatically improved the related problems and limitations of meta-heuristic algorithms. This algorithm performs better than the particle swarm optimization (PSO) and genetic algorithm in convergence to the Pareto, producing a proficiently divided collection of solving ways and the computational time. The results of the simulation also show that the delay parameter of the proposed method is 1.1 per cent better than the genetic algorithm and 0.5 per cent better than the PSO algorithm. Also, in the communication cost parameter, the proposed method has 2.7 per cent better action than a genetic algorithm and 0.16 per cent better action than the PSO algorithm.Originality/valueAs yet, the MOPSO-CD algorithm has not been used for solving the task mapping issue in the NoC.

The non-uniform inflow caused by the elbow inlet is one of the main reasons for the low actual operation performance of a centrifugal pump. Orthogonal experiment and GA_PSO algorithm are used to improve the head and efficiency of a centrifugal pump with an elbow inlet based on the method combining numerical simulation and prototype experiment in this paper. The effects of the design parameters, including elbow inlet radius ratio, blade inlet angle, blade number, blade wrap angle, blade outlet angle, impeller outlet diameter, blade outlet width and flow area ratio, on the pump head and efficiency are studied in the orthogonal experiment. The blade inlet angle is the major factor to match the non-uniform inflow and reduce the flow loss in the impeller inlet to contribute to enhancing the pump performance and cavitation characteristics. The particle swarm optimization (PSO) algorithm is optimized by integrating the genetic algorithm (GA), which ensures that the PSO-calculation result avoids falling into the local optimization and the global optimal solution is obtained as quickly as possible. The centrifugal pump with an elbow inlet is optimally designed by the GA_PSO algorithm. According to the performance test results, the efficiency of the optimized pump is 4.7% higher than that of the original pump.

The objective of the research work is to examine energy-efficient routing in wireless sensor networks for moving nodes by contrasting new evolutionary algorithms with the Particle Swarm Optimization (PSO) Algorithm. Comparative analysis of energy efficient routing is performed by a novel genetic algorithm where there are several samples (N = 10) and a PSO algorithm where there are several samples (N = 10) techniques with pre-test power of 80% using NS2. When routing wireless sensor networks with moving nodes, Various metrics, including delay, energy use, and packet delivery ratio, are used to compare PSO and genetic algorithms. The evolutionary algorithm outperforms the PSO algorithm in these ways in terms of packet delivery ratio, energy usage, and delay. (p < 0.05) indicates a statistically significant difference. The research's findings comprised the three metrics of delay, energy consumption and packet delivery ratio. The method shows that the novel Genetic algorithm outperforms the PSO algorithm for wireless sensor network energy-efficient routing for moving nodes by identifying a set of routes that can satisfy the delay restrictions.KeywordsNovel genetic algorithmParticle Swarm Optimization (PSO)Wireless sensor networkDelayEnergy consumptionPacket delivery ratio

The performances of Particle Swarm Optimization and Genetic Algorithm have been compared to develop a methodology for concurrent and integrated design of mechanical structure and controller of a 2-dof robotic manipulator solving tracking problems. The proposed design scheme optimizes various parameters belonging to different domains (that is, link geometry, mass distribution, moment of inertia, control gains) concurrently to design manipulator, which can track some given paths accurately with a minimum power consumption. The main strength of this study lies with the design of an integrated scheme to solve the above problem. Both real-coded Genetic Algorithm and Particle Swarm Optimization are used to solve this complex optimization problem. Four approaches have been developed and their performances are compared. Particle Swarm Optimization is found to perform better than the Genetic Algorithm, as the former carries out both global and local searches simultaneously, whereas the latter concentrates mainly on the global search. Controllers with adaptive gain values have shown better performance compared to the conventional ones, as expected.

The maximum power point tracking (MPPT) system ensures that the solar cell operates at its maximum power point, which is the point at which it produces the most power for a given set of conditions. This study uses an artificial bee colony (ABC) algorithm and particle swarm optimization (PSO) algorithms to optimize the boost converter. The ABC and PSO algorithms help to optimize the boost converter by finding the best possible duty cycle and other parameters that maximize efficiency. The resulting duty cycle of 20% produced the highest efficiency of 78.26% obtained from the boost converter. A system-wide test was conducted between 9:00 and 11:10 WIB. In MPPT systems using boost converters with the PSO algorithm, the average power is 16.80 W, while in MPPT systems using boost converters with the ABC algorithm, the average power is 14.53 W. The novelty of the study discusses a system designed to optimize power by using a boost converter in order to increase power output from solar panels. The algorithms PSO and ABC are used to analyze the data from the PV and adjust the converter parameters to optimize the output in order to increase the efficiency of the system.

To solve the strong randomicity and slow convergence of the Particle Swarm Optimization(PSO) algorithms, two new particle’s position renewal formulas were analyzed on the basis of extrapolation in mathematics. A new modified PSO algorithms (called Leading PSO algorithms) was put forward. The Direct Torque Control(DTC) System was built in the environment of Matlab(Simulink). The weight and threshold values of BP Neural Network were trained using the modified PSO algorithms. Some disadvantages such as slow convergence speed and easily plunging into the local solution were avoided effectively. The simulation result shows that the system works well, and the rotor speed identifier has great static and dynamic performance.

To improve the simulation accuracy of disease prediction model, a modified hybrid algorithm combining BP neural network (BPNN) with particle swarm optimization (PSO) algorithm based on chaos theory optimization is proposed considering BPNN is easy to fall into the local extremum. The chaos theory is used to optimize PSO algorithm to overcome the premature convergence of the traditional PSO algorithm. Then, the improved CAPSO algorithm is used to train the BPNN, to make full use of the global search characteristic of PSO algorithm and the local search ability of BPNN. The fitness function of the PSO algorithm is used as the energy function, and the optimization method of the improved hybrid algorithm is selected according to the specified number of evolution. An optimized network model was used to predict the prevalence of coronary heart disease. Compared with other algorithms such as BP neural network, the results show that the proposed algorithm has high accuracy and can significantly improve the quality of prediction.

Improved Adaptive PSO-based Gain Tuning for PID Controllers in Utility Boilers