• Home
  • Search
  • VARIABILITY OF KD VALUES IN CEMENTITIOUS MATERIALS AND SEDIMENTS
  • Open Access IconOpen Access
  • Cite Icon10
  • https://doi.org/10.2172/1034390Copy DOI Icon

VARIABILITY OF KD VALUES IN CEMENTITIOUS MATERIALS AND SEDIMENTS

  • Feb 2, 2012
  • P Almond +2 more
Show More
  • Abstract
  • Literature Map
  • References
  • Citations
  • Similar Papers
Abstract

Measured distribution coefficients (K{sub d} values) for environmental contaminants provide input data for performance assessments (PA) that evaluate physical and chemical phenomena for release of radionuclides from wasteforms, degradation of engineered components and subsequent transport of radionuclides through environmental media. Research efforts at SRNL to study the effects of formulation and curing variability on the physiochemical properties of the saltstone wasteform produced at the Saltstone Disposal Facility (SDF) are ongoing and provide information for the PA and Saltstone Operations. Furthermore, the range and distribution of plutonium K{sub d} values in soils is not known. Knowledge of these parameters is needed to provide guidance for stochastic modeling in the PA. Under the current SRS liquid waste processing system, supernate from F & H Tank Farm tanks is processed to remove actinides and fission products, resulting in a low-curie Decontaminated Salt Solution (DSS). At the Saltstone Production Facility (SPF), DSS is mixed with premix, comprised of blast furnace slag (BFS), Class F fly ash (FA), and portland cement (OPC) to form a grout mixture. The fresh grout is subsequently placed in SDF vaults where it cures through hydration reactions to produce saltstone, a hardened monolithic waste form. Variation in saltstone composition and cure conditions of grout can affect the saltstone's physiochemical properties. Variations in properties may originate from variables in DSS, premix, and water to premix ratio, grout mixing, placing, and curing conditions including time and temperature (Harbour et al. 2007; Harbour et al. 2009). There are no previous studies reported in the literature regarding the range and distribution of K{sub d} values in cementitious materials. Presently, the Savannah River Site (SRS) estimate ranges and distributions of K{sub d} values based on measurements of K{sub d} values made in sandy SRS sediments (Kaplan 2010). The actual cementitious material K{sub d} values and solubility values differ from the sandy sediments. The K{sub d} value range and distribution currently used in the PA are estimated to range between 0.25*K{sub d} and 1.75*K{sub d}, where the minimum and maximum values of the ranges reflect the 95% confidence level for the mean K{sub d} value (Kaplan 2010). The objective of the research with cementitious materials was to measure the range and distribution of a monovalent (Cs) and I{sup -} (anion), divalent (Sr), and trivalent (Eu) ions for a variety of laboratory-prepared saltstone surrogate samples to establish a K{sub d} range other than that which is presently used in the PA. It has been observed in laboratory samples that cure temperature profiles can affect properties such as heat of hydration, permeability, porosity, compressive strength, and set time (Harbour et al. 2009). The intent was to identify a range and distribution that could be used by stochastic modelers for the PA. Furthermore, the intent was to replace the arbitrarily selected distributions based on geological sandy sediments and to base it on actual cementitious materials. The scope of this study did not include understanding saltstone sorption mechanisms responsible for increasing or decreasing sorption. Similar to the work with cementitious materials, the purpose of the Pu sediment K{sub d} dataset was not to attempt to understand through statistics how to better understand Pu sorption to sediments or to lower Pu K{sub d} variance. The sediment Pu K{sub d} data is included in this study because it is a key risk driver for the PAs on the SRS, and there is presently no direct studies of Pu variability in SRS soils. Instead the distribution of Pu sediment K{sub d} values was assumed to be similar to other cations, as presented by Kaplan (2010).

Similar Papers
  • Single Report
  • Citations3

Degradation Of Cementitious Materials Associated With Saltstone Disposal Units

  • Mar 19, 2013
  • G Flach +1
  • Research Article
  • Citations27

Bleeding of SCC pastes with fly ash and GGBFS replacement

  • Jan 06, 2014
  • Journal of Sustainable Cement-Based Materials
  • Zhihui Sun +1
  • Single Report

MODULAR CAUSTIC SIDE SOLVENT EXTRACTION UNIT (MCU) GAMMA MONITORS SYSTEM FINAL REPORT

  • Dec 15, 2005
  • V Casella
  • Single Report
  • Citations3

MEASUREMENT OF SPECIFIC HEAT CAPACITY OF SALTSTONE

  • Sep 29, 2008
  • J Harbour +1
  • Research Article
  • Citations1

Optimized Quaternary Binder Systems for Sustainable High-Performance Concrete: Insights from Taguchi Design

  • Dec 05, 2025
  • Applied Sciences
  • Tan-Khoa Nguyen +3
  • Research Article
  • Citations1

Ambient-cured alkali-activated geopolymer mortars: influence of activator molarity and fly ash replacement on microstructure and mechanical performance

  • Jan 12, 2026
  • Archives of Civil and Mechanical Engineering
  • Kenan Toklu +5
  • Research Article

Evaluation of the effect of fineness of fly ash in type I and type II Portland cement blended mortars

  • Sep 10, 2025
  • Journal of Civil Engineering and Management
  • Hari Krishna Subramaniam +2
  • Research Article
  • Citations2

Tempering and modification of basic oxygen furnace slag with blast furnace slag: mineral phase transformations and cementitious material enrichment mechanisms.

  • Dec 01, 2024
  • Case Studies in Construction Materials
  • Shuai Hao +5
  • Single Report
  • Citations2

Status Assessment of Readiness to Deploy Permanganate Treatment for Removal of Strontium and Actinides from Savannah River Site High Level Waste

  • Nov 27, 2002
  • S D Fink
  • PDF
  • Research Article
  • Citations132

Effect of Silica Fume and Slag on Compressive Strength and Abrasion Resistance of HVFA Concrete

  • Mar 01, 2014
  • International Journal of Concrete Structures and Materials
  • Alaa M Rashad +2
  • Single Report
  • Citations20

HEAT OF HYDRATION OF SALTSTONE MIXES-MEASUREMENT BY ISOTHERMAL CALORIMETRY

  • Jul 02, 2007
  • J Harbour +2
  • Research Article
  • Citations8

Role of supplementary cementiteous materials in mitigating heat of hydration in mass concrete elements

  • May 11, 2024
  • Construction and Building Materials
  • Inam Khan +1
  • Single Report

Saltstone Third Quarter Calendar Year 2021 (3QCY21) Toxicity Characteristic Leading Procedure (TCLP) Results

  • Feb 01, 2022
  • Katie Hill
  • Single Report
  • Citations7

Saltstone third quarter calendar year 2019 (3QCY19) toxicity characteristic leaching procedure (TCLP) results

  • Feb 05, 2020
  • Katie Hill
  • Single Report
  • Citations2

Saltstone Second Quarter Calendar Year 2018 (2qcy18) Toxicity Characteristic Leaching Procedure (Tclp) Results

  • Feb 21, 2019
  • Kevin B Hill
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.