Wavelength-Resolution SAR Ground Scene Prediction Based on Image Stack

Change detection is an important synthetic aperture radar (SAR) application, usually used to detect changes on the ground scene measurements in different moments in time. Traditionally, change detection algorithm (CDA) is mainly designed for two synthetic aperture radar (SAR) images retrieved at different instants. However, more images can be used to improve the algorithms performance, witch emerges as a research topic on SAR change detection. Image stack information can be treated as a data series over time and can be modeled by autoregressive (AR) models. Thus, we present some initial findings on SAR change detection based on image stack considering AR models. Applying AR model for each pixel position in the image stack, we obtained an estimated image of the ground scene which can be used as a reference image for CDA. The experimental results reveal that ground scene estimates by the AR models is accurate and can be used for change detection applications.

The development of tools for automated analysis of data collected for mine countermeasures (MCM) search, classify and map (SCM) has predominantly focused on automated target recognition for individual mines. As MCM target detection becomes more automated, detecting spatial patterns in the positioning of mines should follow. Natural restrictions on mine deployment such as depth and bottom contour as well as mine deployment methodology and protocol effectively create mine line patterns that are typical to coastal areas. We have developed a mine line detection algorithm that uses nonparametric spatial analysis to identify mine-like contacts (MLCs) that fit into mine line patterns dictated by standard mine laying protocol in coastal regions. In general, a set of MLCs reported from a mine detection sensor will consist of both actual mines and false alarms; the algorithm classifies every MLC in this set into one of three classes: fixed — the MLCψfits into a mine line pattern with fixed mine spacing; random -the MLCψfits into a mine line pattern with random mine spacing; or false alarm-ψ-the MLCψdoes not fit into a mine line pattern and is subsequently not considered a mine. The latest version of the algorithm utilizes nonparametric techniques and requires no knowledge of either the detection sensor's probability of detection (P d ) or probability of false alarm (P fa ). A nonparametric anomaly detector first identifies regions with unusually high MLC density for more detailed analysis. Suspected regions are subsequently analyzed for unusually regular patterns of MLCs. The probabilities that the observed target densities and target patterns could occur simply by chance are estimated by comparison with results from nearby areas using basic information about mine deployment. To ensure that a mine line's full extent is captured, the algorithm attempts to grow a line after it is detected. And a more detailed probability analysis distinguishes random mine lines from fixed-spaced mine lines. Extensive Matlab simulations characterize the algorithm's performance across a wide range of operating environments and simulated minefield configurations. In total, ten replications each of 1,367 different configurations have been evaluated. These configurations include three different water depths (10 ft., 6 ft. and 200 ft.), six false notional alarm rates (1, 2,5,10,15 and 20 false alarms per sq. NM), three false alarm distributions (uniform, sloped, and striped), three sensor probabilities of detections (0.4, 0.6 and 0.9), three target confidence scores (0.6,0.8 and 1.0) and four false alarm confidence scores (0.5, 0.6, 0.8 and 1.0). The range of simulation parameters was selected in part as an attempt to push the algorithm past its acceptable performance limits. However, the algorithm performed remarkably well even under the worst conditions. For MLC sets with false alarm rates as high as 20 per square nautical mile, the algorithm correctly classifies over 98% of the MLCs as mines and detects 97% of the mine lines. Furthermore, it reduces the false alarm rate from 20 to 0.2 per square nautical mile with a false mine line rate of 0.14 false lines per square nautical mile. The algorithm achieves even lower false alarm rates when the initial false alarm rate is less than 20. The automated mine line detection discovers many obscure lines that are virtually undetectable to the naked eye.

Ship detection from synthetic aperture radar (SAR) imagery is an important and challenging task. An urgent problem is to improve the detection speed on the condition of the high detection rate. In this letter, a fast and automatic detection method inspired by the multiscale patch-based contrast measure (MPCM) algorithm is proposed. The method can quickly lock some potential target pixels and guide ship detection on them, which avoids the unnecessary and exhaustive search. Experiments on real SAR images demonstrate that the proposed method works well in various noise backgrounds with a high probability of detection (POD), low false alarm rate (FAR), and fast detection speed.

To investigate the limits of building detection from very high-resolution (VHR) synthetic aperture radar (SAR) images, a new method, based on statistical and structural information fusion, is proposed in this paper. The proposed method contains two stages: First, using order statistics constant false alarm rate (OS-CFAR) and power ratio (PR) detectors, a set of detections are made. These detections have different statistical properties, compared to the other objects, and these properties are selected for discriminating buildings from clutters. Second, the morphological analysis is used for increasing the precision of the detection. In this stage, segments, which have the most similarities to buildings in terms of shape and size, are extracted via various structural elements (SEs). The final result is obtained by fusing the two sets of detections. The experimental results on the four real VHR SAR images show that the proposed method has a high detection rate (DR) and low false alarm rate (FAR).

In this paper we empirically examine the probability of detection (PD) and false alarm rate (FAR) for crash site detectionusing polarimetry to discriminate between aircraft target signatures within natural clutter. To date, the search and rescueprogram has tried several automatic target recognition (ATR) algorithms from the literature. While PD seems reasonablewith these algorithms, the FAR is too high (—iO's per square kilometer). The objective of our analysis is to determine if thisis a limitation of the ATR algorithms tried, or if this is the best that can be hoped for given the polarimetric statistics of thetarget and clutter.Keywords: Search and Rescue, Polarimetry, Cameron Transformation, Synthetic Aperture Radar 1. INTRODUCTION Beaconless search and rescue utilizes a synthetic aperture radar (SAR) system to search for downed aircraft in remoteregions. Low frequency SAR is capable of quickly imaging large areas and penetrating bad weather and foliage cover.Coupled to a computer processing system, that includes automatic crash site detection algorithms, SAR has the potential tobecome a significantly useful search tool. We are currently determining the fundamental limits on the probability ofdetection versus the false alarm rate for crash site detection using radar polarimetry. In this paper we present our analysis ofdata from Half Moon Bay (HMB), California, Teton National Park, Wyoming, and from scale-model tests done by SystemPlanning Corporation (SPC), Virginia.

This tutorial presents a state-of-the-art survey of advanced applications of Synthetic Aperture Radar (SAR). Applications include: the detection and recognition of targets in SAR imagery, and the detection of targets under trees (and in the open) using change detection (coherent change detection, full-polarization change detection, etc). A fully polarimetric SAR sensor is described. Models of clutter and targets are developed from analysis of full-polarization SAR imagery. Algorithms for optimum (GLRT) processing of full-polarization data are derived, including the polarimetric whitening filter (PWF) and the polarimetric matched filter (PMF). Polarization-based discrimination features (polarization entropy, anisotropy, etc.) are developed and applied to SAR image terrain classification. Model-based and template-based target recognition systems are described and classifier performance results versus resolution and polarization are summarized for 10-and 20-target classifiers. Super-resolution algorithms are applied to SAR imagery and target recognition performance improvements demonstrated. Multi-polarization and multi-pass change detection algorithms are developed and demonstrated using UHF SAR imagery of targets under trees; fusion of multi-polarization coherent and non-coherent change detection algorithms is demonstrated. The effect of SAR image compression on change detection performance is quantified. Change detection performance using multi-pass VHF SAR imagery of targets under trees is demonstrated using data gathered by the Swedish CARABAS SAR system.

We address the application of model-supported exploitation techniques to synthetic aperture radar (SAR) imagery. The emphasis is on monitoring SAR imagery using wide area 2D and/or 3D site models along with contextual information. We consider here the following tasks useful in monitoring: (a) site model construction using segmentation and labeling techniques, (b) target detection, (c) target classification and indexing, and (d) SAR image-site model registration. The 2-D wide area site models used here for SAR image exploitation differ from typical site models developed for RADIUS applications, in that they do not model specific facilities, but constitute wide area site models of cultural features such as urban clutter areas, roads, clearings, fields, etc. These models may be derived directly from existing site models, possibly constructed from electro-optical (EO) observations. When such models are not available, a set of segmentation and labeling techniques described here can be used for the construction of 2D site models. The use of models can potentially yield critical information which can disambiguate target signatures in SAR images. We address registration of SAR and EO images to a common site model. Specific derivations are given for the case of registration within the RCDE platform. We suggest a constant false alarm rate (CFAR) detection scheme and a topographic primal sketch (TPS) based classification scheme for monitoring target occurrences in SAR images. The TPS of an observed target is matched against candidate targets TPSs synthesized for the preferred target orientation, inferred from context (e.g. road or parking lot targets). Experimental results on real and synthetic SAR images are provided.

The usage of a hypersonic platform for remote sensing application has promising prospects, especially for hypersonic platform-borne synthetic aperture radar (SAR) imaging. However, the high-speed of hypersonic platform will lead to extreme friction between the platform and air, which will cause the ionization of air. The ionized gas forms the plasma sheath wrapped around the hypersonic platform. The plasma sheath will severely affect the propagation of SAR signal and further affect the SAR imaging. Therefore, hypersonic platform-borne SAR imaging should be studied from a physical perspective. In this paper, hypersonic platform-borne SAR imaging under plasma sheath is analyzed. The SAR signal propagation in plasma sheath is computed using scatter matrix method. The proposed SAR signal model is verified by using a ground experiment system. Moreover, the effect of attenuation caused by plasma sheath on SAR imaging is studied under different SAR parameters and plasma sheath. The result shows that attenuation caused by plasma sheath will degrade the SAR imaging quality and even cause the point and area targets to be submerged into the noise. The real SAR images under plasma sheath also illustrate this phenomenon. Furthermore, by studying imaging results under different SAR and plasma parameters, it can be concluded that the severe degradation of SAR imaging quality appears at condition of high plasma sheath electron density and low SAR carrier frequency. The work in this paper will be beneficial for the study of hypersonic platform-borne SAR imaging and design of hypersonic SAR imaging systems in the future.

In this paper, we propose a synthetic aperture radar (SAR) image change detection algorithm based on SAR image nonstationary analysis and conditional random field (CRF) model. This algorithm segments the SAR images into two nonstationary regions with the Triplet Markov Field (TMF) model which incorporates a U field to describe the images' nonstationary nature. The combined posterior probability of the CRF model consists of two parts: the unary potential and the pairwise potential. The unary potential is modeled by support vector machine (SVM) using the texture features extracted from the two-temporal SAR images, and the pairwise potential is constructed by the multilevel logistical model to capture the spatial interactions of the log-ratio image. Both the unary and pairwise potentials are improved with the introduction of the U field. The parameters of the pairwise potential are estimated by the iterative conditional estimation (ICE) algorithm. The iterative conditional model (ICM) algorithm is utilized for updating the combined posterior probability, and the final change detection results are obtained when it converges. Finally, experimental results on four two-temporal SAR images validate the effectiveness of the proposed image change detection algorithm.

In human presence detection for Internet of Things (IoT) applications, Wi-Fi channel state information (CSI)-based methods offer significant advantages in cost-effectiveness and privacy preservation. Existing approaches typically rely on feature engineering or deep learning techniques to process CSI data. However, these methods often struggle to accurately model the complex, probabilistic nature of CSI measurements, particularly in environments with nonhuman moving elements. This leads to suboptimal detection probabilities under low false alarm rate (FAR) conditions. Therefore, this article introduces Wi-CCFAR, a controllable FAR human presence detector utilizing Wi-Fi CSI data. First, we employ a normalizing flow network with spline transformations for data modeling, capturing the complexity of CSI measurement distribution. Second, to address the inherent limitation of the same input and output dimensions in normalizing flow networks, we introduce an efficient feature extractor, which reduces input dimensions and computational requirements while maintaining high detection probabilities by preserving essential information. Last, we implement an enhanced information bottleneck loss function, which balances data fitness and class divergence, to achieve favorable detection probabilities under low FAR conditions. Experimental results demonstrate that Wi-CCFAR outperforms conventional methods, achieving higher detection probabilities with lower false alarm probabilities, even in challenging scenarios with various interferences such as moving objects and multiple occupants.

This paper presents an incoherent change detection algorithm (CDA) for synthetic aperture radar (SAR) images based on logistic regression. The input data consists of a set of 24 SAR images acquired in a test site in northern Sweden [1]. Subsets of these images are trained based on pixel amplitude, flight heading and neighboring features such as local mean, standard deviation and skewness. The proposed method intends to explore the advantadges from both pixel- and object-based approaches, while evaluating multiple features in amplitude-only SAR images. Preliminary results based on K-fold cross-validation have shown that the proposed CDA achieves good performance when compared to the results presented in [1].

In general, synthetic aperture radar (SAR) imaging and image processing are two sequential steps in SAR image processing. Due to the large size of SAR images, most image processing algorithms require image segmentation before processing. However, the existence of speckle noise in SAR images, as well as poor contrast and the uneven distribution of gray values in the same target, make SAR images difficult to segment. In order to facilitate the subsequent processing of SAR images, this paper proposes a new method that combines the back-projection algorithm (BPA) and a first-order gradient operator to enhance the edges of SAR images to overcome image segmentation problems. For complex-valued signals, the gradient operator was applied directly to the imaging process. The experimental results of simulated images and real images validate our proposed method. For the simulated scene, the supervised image segmentation evaluation indexes of our method have more than 1.18%, 11.2% and 11.72% improvement on probabilistic Rand index (PRI), variability index (VI), and global consistency error (GCE). The proposed imaging method will make SAR image segmentation and related applications easier.

Remote-sensing image interpretations and applications require information on changes in the target. In high-resolution synthetic aperture radar (SAR) images, multi-scattering centres reflect the characteristics of target scattering, but not those of point targets or point scattering. Total scattering is the vector summation of each scattering centre. These scattering centres include shape and structural information of the target. When a target changes, both the scattering characteristics and the scattering centres change. In this way, changes in the centres may cancel out changes in the target. This article proposes a new method of change detection for SAR image targets using the two-dimensional scattering centre characteristics (TDSCC). This method is here called the TDSCC algorithm. This algorithm differs from other change detection algorithms that are based on image fields. General change detection algorithms require accurate registration. Otherwise, the change information is inaccurate. The TDSCC method is a feature-level or target-level change detection algorithm and it does not require registration operation. Therefore, it avoids errors in change information. The experimental data have confirmed the feasibility of the proposed algorithm.

This paper proposes a novel method on Synthetic Aperture Radar (SAR) Image denoising, which is based on context modeling combined with multiscale orthogonal bandlet coefficients. For the main influence of SAR image is multiplicative speckle noise, the logarithm uniform transform is used to convert it to additive noise. In this paper, the multiscale orthogonal bandlet transform is applied to noisy SAR Image. The contextual model is used to compute contextual values of bandlet coefficients on each scale. Therefore, bandlet coefficients are reconstructed into some parts by contextual values. The spatially adaptive soft-threshold (T) is to denoise SAR image in each part. Experimental results demonstrate that this method outperforms the methods of Ehance-Lee (E-lee), contextual model based on wavelet domain (Wavelet-context), and Hidden Markov Tree model bases on wavelet domain (Wavelet-hmt) on there indexes: Floating index (FI), Standard deviation and Edge saving index of vertical direction, by using a real SAR image. However, the method can not only reduce the speckle noise but also preserve edges and high frequency information, and gets considerable visual effect on SAR Image denoising.

In this paper, a new automatic and adaptive aircraft target detection algorithm in high-resolution airport synthetic aperture radar (SAR) images is proposed. Firstly, region segmentation is used to detect the apron area in the images, which provides the potential area where aircrafts may exist and reduce the search range. Secondly, upon the apron area the pre-segmentation is taken to label the possible target points. Thirdly, the constant false alarm rate (CFAR) detector is improved to cope with multi-target detection situation. The clutter pixels in the sliding detection window will be removed automatically based on pre-segmentation result. As a result, more structural features of the targets are preserved. At last, in order to eliminate the detected false targets and solve the problem that the same target is divided into several disconnected areas, a new joint algorithm based on the area recognition factors and distance cluster is presented. The real airborne SAR image data of some airport is used to verify this target detection algorithm, and the result indicates that this algorithm can detect the aircraft target precisely and decrease the false alarm rate.