Wavelength-scanning lensfree on-chip microscopy for wide-field pixel-super-resolved quantitative phase imaging.

Differential phase contrast (DPC) is a non-interferometric quantitative phase imaging method achieved by using an asymmetric imaging procedure. We report a pupil modulation differential phase contrast (PMDPC) imaging method by filtering a sample's Fourier domain with half-circle pupils. A phase gradient image is captured with each half-circle pupil, and a quantitative high resolution phase image is obtained after a deconvolution process with a minimum of two phase gradient images. Here, we introduce PMDPC quantitative phase image reconstruction algorithm and realize it experimentally in a 4f system with an SLM placed at the pupil plane. In our current experimental setup with the numerical aperture of 0.36, we obtain a quantitative phase image with a resolution of 1.73μm after computationally removing system aberrations and refocusing. We also extend the depth of field digitally by 20 times to ±50μm with a resolution of 1.76μm.

Dielectric metasurfaces have recently attracted much attention due to their ability to efficiently control light propagation, that is, its amplitude, phase and polarization, on micro- and macro- levels. Such metasurfaces also naturally allow for integration in compact optical setups due to their small sizes. An important issue of energy losses is also addressed by employing all-dielectric platform. Advancements in nanofabrication have enabled realization of metasurface-based high-resolution wavefront engineering devices, which have been employed in different imaging applications, for example, as metalenses, polarization filters, metaholograms, etc. Quantitative phase imaging is a powerful tool for the optical inspection of transparent samples in connection with biological and technical applications. By measuring thickness and/or refractive index profiles, phase imaging facilitates, for example, the observation of dynamic events in unstained cells. As such, it has become indispensable in biological imaging, wavefront correction and metrology. However, conventional cameras and photodetectors are inherently not sensitive to the phase of an incident lightwave. As a consequence, direct phase detection is challenging. Only by multiple intensity measurements or application of specialized interferometric schemes, the phase profile of an object can be in principle reconstructed. In this paper, we report on the ability of metasurfaces to contribute to quantitative phase imaging by independent control of the phase profiles in two orthogonal polarization states of an incident beam.

Conventional wavelength-scanning phase retrieval introduces different illumination wavelengths for acquiring phase diversity intensity measurements. However, slow-varying phase information cannot be converted to intensity variations for detection. As a result, the low-frequency contents of the phase profile cannot be properly restored in the phase retrieval process. To address this challenge, in this Letter we present a spatially coded wavelength-scanning approach (scWS), a novel (to the best of our knowledge) method that synergizes wavelength scanning with spatial-domain coded detection for true quantitative phase imaging. In our scheme, we add a thin coded layer on top of the image sensor for encoding the slow-varying phase information into the intensity measurements with modulated patterns. Inspired by the coded ptychographic imaging, we report a reconstruction scheme to jointly recover the complex object and the unknown coded layer. With both simulation and experimental results, we show that the recovered phase is quantitative and the slow-varying phase profiles can be properly restored in post-acquisition reconstruction. Additionally, the reported approach can obtain a better image quality compared to the conventional wavelength-scanning approach. The development of a scWS lensless on-chip microscopy (LOM) platform is expected to inspire applications in the realm of computational microscopy, especially in applications where portable and in situ measurements are required.

Quantitative phase microscopy (QPM) is a label-free imaging technique often employed for long-term, high-contrast imaging of live bio-samples. Yet, QPM is not specific to a certain subcellular organelle. As a remedy, fluorescence microscopy can visualize specific subcellular organelles once being labeled with fluorescent markers. In this paper, a high-resolution phase/fluorescence dual-modality microscopic imaging method based on structured light illumination is proposed. In a dual-modality microscopic system, periodic stripes are generated by a digital micromirror array (DMD), and are used as the common illumination for both modalities. For QPM imaging, the holograms of the sample under structured light illuminations from different directions and phase shifts are recorded, from which a quantitative phase image with resolution enhancement can be reconstructed via a synthetic aperture procedure. Furthermore, a numerical approach is proposed to compensate for the environmental disturbances that often challenge aperture synthesis of phase imaging. This method determines each time the phase distortions caused by environmental disturbances through using the spectrum of the 0th order of the structured light illumination, and the phase distortions are removed from the phase distributions of the waves along the 0th and the ±1st diffraction orders. Resolution enhancement of QPM imaging is realized by synthesizing the spectra of all the waves along different diffraction orders of the structured light illuminations of different orientations. With phase images, three-dimensional shapes, inner structures, or refractive index distributions of transparent and translucent samples can be obtained. For fluorescence imaging, intensity images (morie patterns) of the sample under different structured light illuminations are recorded. The spectra along different diffraction orders are separated by using a phase shifting reconstruction algorithm, and are shifted to their original positions, forming a synthesized spectrum that is much broader than the spectra of raw intensity images (NA-limited spectra). An inverse Fourier transform on the synthesized spectrum yields a super-resolution fluorescence image of the sample. With the reconstructed fluorescence images, specific subcellular organelles labeled with fluorescent markers can be visualized. The combination of quantitative phase microscopy and fluorescence microscopy can obtain multidimensional information about the sample. In this dual-mode imaging system, the spatial resolution of quantitative phase imaging and fluorescence imaging are 840 nm and 440 nm, respectively. The proposed dual-mode microscopy imaging technique has been demonstrated for imaging fluorescent beads, fly wings, spring/rice leaves, mouse tail transection, and fluorescence-stained SiHa cells. We envisage that this method can be further applied to many fields, such as biomedicine, industry, and chemistry.

Quantitative phase measurements at multiple wavelengths has created an opportunity for exploring new avenues in phase microscopy such as enhancing imaging-depth (1), measuring hemoglobin concentrations in erythrocytes (2), and more recently in tomographic mapping of the refractive index of live cells (3). To this end, quantitative phase imaging has been demonstrated both at few selected spectral points as well as with high spectral resolution (4,5). However, most of these developed techniques compromise imaging speed, field of view, or the spectral resolution to perform interferometric measurements at multiple colors. In the specific application of quantitative phase in studying blood diseases and red blood cells, current techniques lack the required sensitivity to quantify biological properties of interest at individual cell level. Recently, we have set out to develop a stable quantitative interferometric microscope allowing for measurements of such properties for red cells without compromising field of view or speed of the measurements. The feasibility of the approach will be initially demonstrated in measuring dispersion curves of known solutions, followed by measuring biological properties of red cells in sickle cell anemia.

Transmission optical coherence tomography (tOCT) is gaining interest for imaging biological samples; however, so far, quantitative phase information has not been directly obtained. This study introduces SOPHAST-OCT, an approach for integrated 2D phase recovery in Off-Axis Full-Field Swept-Source tOCT. It uses phase-shifting to leverage OCT’s inherent phase changes between recorded interferograms. SOPHAST-OCT demonstrates promising phase agreement with the simulated ground truth phase. This approach represents a first step toward quantitative imaging in tOCT. Full Text: PDF References Y. Park, C. Depeursinge, G. Popescu, "Quantitative phase imaging in biomedicine", Nature Photon 12, 578 (2018). CrossRef K. Alm, H. Cirenajwis, L. Gisselsson, A.G. Wingren, B. Janicke, A. Mölder, et al., in Holography, Research and Technologies (IntechOpen, 2011). CrossRef W. Drexler, J. Fujimoto, editors , Optical Coherence Tomography: Technology and Applications, 2nd ed. (Springer Cham, 2015). CrossRef W. Krauze, P. Ossowski, M. Nowakowski, M. Szkulmowski, M. Kujawińska, "Enhanced QPI functionality by combining OCT and ODT methods", Quantitative Phase Imaging VII, 11653, 19 (2021). CrossRef B.C. Wilson, S.L. Jacques, "Optical reflectance and transmittance of tissues: principles and applications", IEEE J. Quantum Electron. 26, 2186 (1990). CrossRef J. van der Horst, A.K. Trull, J. Kalkman, "Deep-tissue label-free quantitative optical tomography", Optica 7, 1682 (2020). CrossRef P. Hosseini, Y. Sung, Y. Choi, N. Lue, Z. Yaqoob, P. So, "Scanning color optical tomography (SCOT)", Opt. Expr. 23, 19752 (2015). CrossRef P. de Groot, "Phase Shifting Interferometry" in Optical Measurement of Surface Topography, edited by R. Leach (Springer, Berlin, Heidelberg, 2011). CrossRef M. Wojtkowski, A. Kowalczyk, R. Leitgeb, A.F. Fercher, "Full range complex spectral optical coherence tomography technique in eye imaging", Opt. Lett. 27, 1415 (2002). CrossRef Q. Zhang, S. Zhong, J. Lin, W. Chen, M. Luo, J. Zhong, Y. Yu, Z. Peng, S. Cheng, "Full-range Fourier-domain optical coherence tomography based on Mach–Zehnder interferometer", Opt. Lasers Engin. 124, 105794 (2020). CrossRef R. Juarez-Salazar, C. Robledo-Sanchez, F. Guerrero-Sanchez, A. Rangel-Huerta, "Generalized phase-shifting algorithm for inhomogeneous phase shift and spatio-temporal fringe visibility variation", Opt. Express 22, 4738 (2014). CrossRef R. Juarez-Salazar, C. Robledo-Sánchez, C. Meneses-Fabian, F. Guerrero-Sánchez, L. M. Arévalo Aguilar, "Generalized phase-shifting interferometry by parameter estimation with the least squares method", Opt. Lasers Engin. 51, 626 (2013). CrossRef M.A. Herráez, D.R. Burton, M.J. Lalor, M.A. Gdeisat, "Fast two-dimensional phase-unwrapping algorithm based on sorting by reliability following a noncontinuous path", Appl. Opt. 41, 7437 (2002). CrossRef Z. Wang, A.C. Bovik, "A universal image quality index", IEEE Signal Proc. Lett. 9, 81 (2002). CrossRef

It is well known that the quantitative phase information which is vital in the biomedical study is hard to be directly obtained with bright-field microscopy under incoherent illumination. In addition, it is impossible to maintain the living sample in focus over long-term observation. Therefore, both the autofocusing and quantitative phase imaging techniques have to be solved in microscopy simultaneously. Here, we propose a lightweight deep learning-based framework, which is constructed by residual structure and is constrained by a novel loss function model, to realize both autofocusing and quantitative phase imaging. It outputs the corresponding in-focus amplitude and phase information at high speed (10fps) from a single-shot out-of-focus bright-field image. The training data were captured with a designed system under a hybrid incoherent and coherent illumination system. The experimental results verify that the focused and quantitative phase images of non-biological samples and biological samples can be reconstructed by using the framework. It provides a versatile quantitative technique for continuous monitoring of living cells in long-term and label-free imaging by using a traditional incoherent illumination microscopy system.

We present cytometric classification of live healthy and cancerous cells by using the spatial morphological and textural information found in the label-free quantitative phase images of the cells. We compare both healthy cells to primary tumor cells and primary tumor cells to metastatic cancer cells, where tumor biopsies and normal tissues were isolated from the same individuals. To mimic analysis of liquid biopsies by flow cytometry, the cells were imaged while unattached to the substrate. We used low-coherence off-axis interferometric phase microscopy setup, which allows a single-exposure acquisition mode, and thus is suitable for quantitative imaging of dynamic cells during flow. After acquisition, the optical path delay maps of the cells were extracted and then used to calculate 15 parameters derived from the cellular 3D morphology and texture. Upon analyzing tens of cells in each group, we found high statistical significance in the difference between the groups in most of the parameters calculated, with the same trends for all statistically significant parameters. Furthermore, a specially designed machine learning algorithm, implemented on the phase map extracted features, classified the correct cell type (healthy/cancer/metastatic) with 81-93% sensitivity and 81-99% specificity. The quantitative phase imaging approach for liquid biopsies presented in this paper could be the basis for advanced techniques of staging freshly isolated live cancer cells in imaging flow cytometers. © 2017 International Society for Advancement of Cytometry.

Inflammatory bowel diseases (IBD) are inflammatory disorders of the gastrointestinal tract characterized by a chronic relapsing disease course. As uncontrolled intestinal inflammation can result in severe disease complications, recent treatment targets of IBD evolved toward seeking the absence of mucosal and histological inflammation. However, this approach requires adequate histological evaluation of IBD disease activity. The diagnostic challenge of histological examination of intestinal inflammation is documented by the multitude of proposed histological scoring systems. In this context, we review quantitative phase imaging (QPI) techniques such as digital holographic microscopy (DHM) for characterizing intestinal inflammation. DHM determines optical path-length delays in a stain-free manner, thereby providing the tissue refractive index as a biophysical marker that directly correlates to tissue density. Recently, DHM has been successfully applied in cell biology, cancer cell research and infectious-induced cellular alterations. We summarized the capabilities of DHM and related QPI techniques to assess the severity of intestinal inflammation in experimental colitis as well as in colonic samples from human IBD patients. Moreover, we illustrate major advantages of DHM facilitated multimodal evaluation of epithelial wound healing processes as assessed by physical parameters like cell volume, density, thickness and dry mass in vitro. Furthermore, potential limitations of DHM and future utilities of QPI are discussed. In conclusion, DHM represents a promising, easy-to-use quantitative tool to provide accurate and objective assessment of intestinal inflammation and may pave the way towards automated label-free digital pathology and related in vitro cell culture analysis in future.

Digital holographic microscopy (DHM) is an important technique that may be used for quantitative phase imaging of unstained biological cell samples. Since the DHM technology is not commonly used in clinics or bioscience research labs, at present there is no well-accepted focusing criterion for unstained samples that users can follow while recording image plane digital holograms of cells. The usual sharpness metrics that are useful for auto-focusing of stained cells do not work well for unstained cells as there is no amplitude contrast. In this work, we report a practical method for estimating the best focus plane for unstained cells in the digital hologram domain. The method is based on an interesting observation that for the best focus plane the fringe pattern associated with individual unstained cells predominantly shows phase modulation effect in the form of bending of fringes and minimal amplitude modulation. This criterion when applied to unstained red blood cells shows that the central dip in the doughnut-like phase profile of cells is maximal in this plane. The proposed methodology is helpful for standardizing the usage of DHM technology across different users and application developmentefforts. LAY DESCRIPTION: Digital holographic microscopy (DHM) is slowly but steadily becoming an important microscopy modality and gaining acceptability for basic bio-science research as well as clinical usage. One of the important features of DHM is that it allows users to perform quantitative imaging of unstained transparent cells. Instead of using dyes or fluorescent labelling, DHM systems use quantitative phase as a contrast mechanism which depends on the natural refractive index variation within the cell samples. Since minimal wet lab processing is required in order to image cell samples with a DHM, cells can be imaged in their natural state. While DHM is gaining popularity among users, the imaging protocols across the labs or users need to be standardized in order to make sure that the same quantitative phase parameters are used for tasks such as quantitative phased based cellclassification. One of the important operational tasks for any microscopy work is to focus the sample under study. While focusing comes naturally to users of brightfield microscopes based on image contrast, the focusing is not straightforward when samples are unstained so that they do not offer any amplitude contrast. When performing quantitative phase imaging, defocus can actually change the phase profile of the cell due to near-zone (Fresnel) diffraction effects. So unless a standardized focusing methodology is used, it will be difficult for multiple DHM users (potentially at different sites) to agree on quantitative results out of their phase images. DHM literature has prior works which perform numerical focusing of recovered complex wave-field in the hologram plane to find the best focus plane. However such methods are not user friendly and do not allow user the same focusing experience as in a brightfield microscope. The numerical focusing is therefore a reasonably good method for an optics researcher but not necessarily so for a microscopy technician looking at cell samples with a DHM system in a clinicalsetting. The present work provides a simple focusing criterion for unstained samples that works directly in the hologram domain. The technique is based on an interesting observation that the when an unstained cell sample is in the best-focus plane, its corresponding hologram (or fringe pattern) predominantly shows phase modulation manifested by bending of fringes at the location of the cell. This criterion can be converted into a simple numerical method as we have used to find the best-focus plane using a stack of through focus holograms. We believe that the technique can be used manually by visually observing the holograms or can be converted to an auto-focus algorithm for a motorized DHMsystem.

The advantages of quantitative phase microscopy (QPM) such as label-free imaging with high spatial sensitivity, live cell compatibility and high-speed imaging makes it viable for various biological applications. The measurement accuracy of QPM strongly relies on the shape of the recorded interferograms, whether straight or curved fringes are recorded during the data acquisition. Moreover, for a single shot phase recovery high fringe density is required. The wavefront curvature for the high-density fringes over the entire field of view is difficult to be discerned with the naked eye. As a consequence, there is a quadratic phase aberration in the recovered phase images due to curvature mismatch. In the present work, we have implemented sampling moiré method for real-time sensing of the wavefront curvature mismatch between the object and the reference wavefronts and further for its correction. By zooming out the interferogram, moiré fringes are generated which helps to easily identify the curvature of the fringes. The wavefront curvature mismatch correction accuracy of the method is tested with the help of low temporal coherent light source such as a white light (temporal coherence ∼ 1.6 µm). The proposed scheme is successfully demonstrated to remove the quadratic phase aberration caused due to wavefront mismatch from an USAF resolution target and the biological tissue samples. The phase recovery accuracy of the current scheme is further compared with and found to better than the standard method called principle component analysis. The proposed method enables recording of the corrected wavefront interferogram without needing any additional optical components or modification and also does not need any post-processing correction algorithms. The proposed method of curvature compensation paves the path for a high-throughput and accurate quantitative phase imaging.

Wedge prism assisted quantitative phase imaging on standard microscopes

Label-free optical imaging is valuable for studying fragile biological phenomena where chemical and/or optical damages associated with exogenous labelling of biomolecules are not wanted. Molecular vibrational (MVI) and quantitative phase imaging (QPI) are the two most-established label-free imaging methods that provide biochemical and morphological information of the sample, respectively. While these methods have pioneered numerous important biological analyses along their intensive technological development over the past twenty years, their inherent limitations are still left unresolved. In this contribution, we present a unified imaging scheme that bridges the technological gap between MVI and QPI, achieving simultaneous and in-situ integration of the two complementary label-free contrasts using the midinfrared (MIR) photothermal effect. Our method is a super-resolution MIR imaging where vibrational resonances induced by wide-field MIR excitation and the resulting photothermal RI changes are detected and localized with the spatial resolution determined by a visible-light-based QPI system. We demonstrate applicability of this method, termed MV-sensitive QPI (MV-QPI), to live-cell imaging. Our MV-QPI method could allow for quantitative mapping of subcellular biomolecular distributions within the global cellular morphology in a label-free and damage-less manner, providing more comprehensive pictures of complex and fragile biological activities.

We propose a quantitative phase imaging technique with single-path phase-shifting digital holography using a light-emitting diode (LED). A reference wave is generated from an object wave in the Fourier plane using a single-path interferometer, based on self-reference digital holography. The object wave interferes with the reference wave, and the quantitative phase information of the object wave is recorded as a digital hologram. Quantitative phase images of objects are obtained by applying a phase-shifting interferometry technique. All the light diffracted from the objects can be utilized to generate a digital hologram. Its validity is experimentally demonstrated by constructing an optical system with a wide-field optical microscope.

Quantitative phase imaging (QPI) provides unique access to cellular and subcellular structures with nanometer-scale sensitivity, making it a valuable tool for non-destructive, label-free imaging of biological samples. However, implementation of QPI typically involves a transmission-based geometry and requires thin samples, preventing use of QPI in many important clinical settings, including endoscopy. In this work we demonstrate a fiber-optic device, with epi-illumination, capable of providing quantitative phase information that is well suited for clinical endoscopy, among other biomedical applications.