Weighted Grid Partitioning for Panel-Based Bathymetric SLAM

The mobile robot which accomplishes a work in explored region does not know location information of surroundings. Traditionally, simultaneous localization and mapping(SLAM) algorithms solve the localization and mapping problem in explored regions. Among the several SLAM algorithms, the EKF (Extended Kalman Filter) based SLAM is the scheme most widely used. The EKF is the optimal sensor fusion method which has been used for a long time. The odometric error caused by an encoder can be compensated by an EKF, which fuses different types of sensor data with weights proportional to the uncertainty of each sensor. In many cases the EKF based SLAM requires artificially installed features, which causes difficulty in actual implementation. Moreover, the computational complexity involved in an EKF increases as the number of features increases. And SLAM is a weak point of long operation time. Therefore, this paper presents a symmetrical model based SLAM algorithm (called M-SLAM).

Simultaneous localization and mapping (SLAM), a pivotal technology in robotics, autonomous vehicles, and surveillance, has gained prominence with the emergence of edge intelligence. Developing energy-efficient, low-latency SLAM systems is essential due to resource constraints and real-time demands. Compute-in-memory (CIM) architectures have been proven to be efficient for matrix multiplications. However, applications for SLAM raise new challenges in memory access and computation aspects: the linear system solving (LS) requires row transformation and causes frequent CIM updates, while the backend optimization causes redundant memory access; back-end optimization dominates SLAM’s computation and requires high precision and high dynamic range. Thus, we propose SLAM-CIM, a visual SLAM backend processor for edge robotics. A dynamic-range-driven-skipping CIM macro is designed to realize energy-efficient floating point (FP)-multiply-and-accumulate (MAC) operations. A preconditional-conjugate-gradient-based in-memory linear solver (PILARS) is designed to achieve LS without additional row transformations. This reduces memory access by 2.08 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\times$</tex-math> </inline-formula> and linear-system-solving latency by 3.84 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\times$</tex-math> </inline-formula> . SLAM-CIM further minimizes CIM weight updates through incremental bundle adjustment (BA), increasing average CIM utilization by 2.8 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\times$</tex-math> </inline-formula> . A silicon prototype is fabricated using 28-nm CMOS technology. The measurements show that SLAM-CIM achieves accurate and efficient SLAM operations with an average energy efficiency of 31.53 TFLOPS/W.

Simultaneous localization and mapping (SLAM) is a central and complex problem in robot research community. In SLAM, extended Kalman filter (EKF) implementation is widely used to localize the robot and build the environment map incrementally. In this paper, we propose a strong tracking filter (STF) SLAM algorithm. This algorithm applies STF to deal with the non-linear estimated problem in SLAM instead of EKF. It can make the performance of the nonlinear filter approximate to that of optimal linear Kalman Filter (KF), so it can construct high accuracy maps and locate the robot more accurately than EKF SLAM. Simulation experiments illustrate the superior performance of our approach compared to EKF SLAM algorithm.

Simultaneous Localization And Mapping (SLAM) has become a crucial aspect in the fields of autonomous driving and robotics. One crucial component of visual SLAM is the Field-of-View (FoV) of the camera, as a larger FoV allows for a wider range of surrounding elements and features to be perceived. However, when the FoV of the camera reaches the negative half-plane, traditional methods for representing image feature points using <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$[u,v,1]^T$</tex-math> </inline-formula> become ineffective. While the panoramic FoV is advantageous for loop closure, its benefits are not easily realized under large-attitude-angle differences where loop-closure frames cannot be easily matched by existing methods. As loop closure on wide-FoV panoramic data further comes with a large number of outliers, traditional outlier rejection methods are not directly applicable. To address these issues, we propose LF-VISLAM, a <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">V</b> isual <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">I</b> nertial <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">SLAM</b> framework for cameras with extremely <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">L</b> arge <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">F</b> oV with loop closure. A three-dimensional vector with unit length is introduced to effectively represent feature points even on the negative half-plane. The attitude information of the SLAM system is leveraged to guide the feature point detection of the loop closure. Additionally, a new outlier rejection method based on the unit length representation is integrated into the loop closure module. We collect the PALVIO dataset using a <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">P</b> anoramic <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">A</b> nnular <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">L</b> ens (PAL) system with an entire FoV of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$360^\circ{\times}(40^\circ{\sim}120^\circ)$</tex-math> </inline-formula> and an Inertial Measurement Unit (IMU) for <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">V</b> isual <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">I</b> nertial <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">O</b> dometry (VIO) to address the lack of panoramic SLAM datasets. Experiments on the established PALVIO and public datasets show that the proposed LF-VISLAM outperforms state-of-the-art SLAM methods. Our code will be open-sourced at https://github.com/flysoaryun/LF-VISLAM. <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">Note to Practitioners</i> —Motivated by the challenges of handling large-FoV cameras in SLAM applications, this paper proposes LF-VISLAM, a novel SLAM framework that uses a large-FoV camera and IMU sensors. Our framework is equipped with a loop closure thread that can use attitude information to eliminate accumulated errors. We have made algorithmic adjustments and optimizations to the negative half-plane features to better adapt to cameras with large FoV. Experimental evaluations demonstrate that LF-VISLAM significantly outperforms traditional SLAM methods. Additionally, the code will be open-sourced, providing easy access for research and implementation. Overall, LF-VISLAM is a promising solution to improve the performance of SLAM in challenging environments of autonomous driving and robotics.

In the last decades, Simultaneous Localization and Mapping (SLAM) proved to be a fundamental topic in the field of robotics, due to the many applications, ranging from autonomous driving to 3D reconstruction. Many systems have been proposed in literature exploiting a heterogeneous variety of sensors. State-of-the-art methods build their own map from scratch, using only data coming from the equipment of the robot, and not exploiting possible reconstructions of the environment. Moreover, temporary loss of data proves to be a challenge for SLAM systems, as it demands efficient re-localization to continue the localization process. In this paper, we present a SLAM system that exploits additional information coming from mapping services like OpenStreetMaps, hence the name OSM-SLAM, to face these issues. We extend an existing LiDAR-based Graph SLAM system, ART-SLAM, making it able to integrate the 2D geometry of buildings in the trajectory estimation process, by matching a prior OpenStreetMaps map with a single LiDAR scan. Each estimated pose of the robot is then associated with all buildings surrounding it. This association allows to improve localization accuracy, but also to adjust possible mistakes in the prior map. The pose estimates coming from SLAM are then jointly optimized with the constraints associated with the various OSM buildings, which can assume one of the following types: Buildings are always fixed (Prior SLAM); buildings surrounding a robot are movable in chunks, for every scan (Rigid SLAM); and every single building is free to move independently from the others (Non-rigid SLAM). Lastly, OSM maps can also be used to re-localize the robot when sensor data is lost. We compare the accuracy of the proposed system with existing methods for LiDAR-based SLAM, including the baseline, also providing a visual inspection of the results. The comparison is made by evaluating the estimated trajectory displacement using the KITTI odometry dataset. Moreover, the experimental campaign, along with an ablation study on the re-localization capabilities of the proposed system and its accuracy in loop detection-denied scenarios, allow a discussion about how the quality of prior maps influences the SLAM procedure, which may lead to worse estimates than the baseline.

Simultaneous Localization and Mapping (SLAM) is one of the most challenging research areas within computer and machine vision for automated scene commentary and explanation. The SLAM technique has been a developing research area in the robotics context during recent years. By utilizing the SLAM method robot can estimate the different positions of the robot at the distinct points of time which can indicate the trajectory of robot as well as generate a map of the environment. SLAM has unique traits which are estimating the location of robot and building a map in the various types of environment. SLAM is effective in different types of environment such as indoor, outdoor district, Air, Underwater, Underground and Space. Several approaches have been investigated to use SLAM technique in distinct environments. The purpose of this paper is to provide an accurate perceptive review of case history of SLAM relied on laser/ultrasonic sensors and camera as perception input data. In addition, we mainly focus on three paradigms of SLAM problem with all its pros and cons. In the future, use intelligent methods and some new idea will be used on visual SLAM to estimate the motion intelligent underwater robot and building a feature map of marine environment.

The millimeter-wave (mmWave) communication technology, which employs large-scale antenna arrays, enables inherent sensing capabilities. Simultaneous localization and mapping (SLAM) can utilize channel multipath angle estimates to realize integrated sensing and communication design in 6G communication systems. However, existing works have ignored the significant overhead required by the mmWave beam management when implementing SLAM with angle estimates. This study proposes a joint beam management and SLAM design that utilizes the strong coupling between the radio map and channel multipath for simultaneous beam management, localization, and mapping. In this approach, we first propose a hierarchical sweeping and sensing service design. The path angles are estimated in the hierarchical sweeping, enabling angle-based SLAM with the aid of an inertial measurement unit (IMU) to realize sensing service. Then, feature-aided tracking is proposed that utilizes prior angle information generated from the radio map and IMU. Finally, a switching module is introduced to enable flexible switching between hierarchical sweeping and feature-aided tracking. Simulations show that the proposed joint design can achieve sub-meter level localization and mapping accuracy (with an error < 0.5 m). Moreover, the beam management overhead can be reduced by approximately 40% in different wireless environments.

Most simultaneous localization and mapping (SLAM) systems assume that SLAM is conducted in a static environment. When SLAM is used in dynamic environments, the accuracy of each part of the SLAM system is adversely affected. We term this problem as dynamic SLAM. In this study, we propose solutions for three main problems in dynamic SLAM: camera tracking, three-dimensional map reconstruction, and loop closure detection. We propose to employ geometry-based method, deep learning-based method, and the combination of them for object segmentation. Using the information from segmentation to generate the mask, we filter the keypoints that lead to errors in visual odometry and features extracted by the CNN from dynamic areas to improve the performance of loop closure detection. Then, we validate our proposed loop closure detection method using the precision-recall curve and also confirm the framework’s performance using multiple datasets. The absolute trajectory error and relative pose error are used as metrics to evaluate the accuracy of the proposed SLAM framework in comparison with state-of-the-art methods. The findings of this study can potentially improve the robustness of SLAM technology in situations where mobile robots work together with humans, while the object-based point cloud byproduct has potential for other robotics tasks.

Accurate localization and reliable mapping is essential for autonomous navigation of robots. As one of the core technologies for autonomous navigation, Simultaneous Localization and Mapping (SLAM) has attracted widespread attention in recent decades. Based on vision or LiDAR sensors, great efforts have been devoted to achieving real-time SLAM that can support a robot’s state estimation. However, most of the mature SLAM methods generally work under the assumption that the environment is static, while in dynamic environments they will yield degenerate performance or even fail. In this paper, first we quantitatively evaluate the performance of the state-of-the-art LiDAR-based SLAMs taking into account different pattens of moving objects in the environment. Through semi-physical simulation, we observed that the shape, size, and distribution of moving objects all can impact the performance of SLAM significantly, and obtained instructive investigation results by quantitative comparison between LOAM and LeGO-LOAM. Secondly, based on the above investigation, a novel approach named EMO to eliminating the moving objects for SLAM fusing LiDAR and mmW-radar is proposed, towards improving the accuracy and robustness of state estimation. The method fully uses the advantages of different characteristics of two sensors to realize the fusion of sensor information with two different resolutions. The moving objects can be efficiently detected based on Doppler effect by radar, accurately segmented and localized by LiDAR, then filtered out from the point clouds through data association and accurate synchronized in time and space. Finally, the point clouds representing the static environment are used as the input of SLAM. The proposed approach is evaluated through experiments using both semi-physical simulation and real-world datasets. The results demonstrate the effectiveness of the method at improving SLAM performance in accuracy (decrease by 30% at least in absolute position error) and robustness in dynamic environments.

This paper presents a sensor fusion strategy applied for Simultaneous Localization and Mapping (SLAM) in dynamic environments. The designed approach consists of two features: (i) the first one is a fusion module which synthesizes line segments obtained from laser rangefinder and line features extracted from monocular camera. This policy eliminates any pseudo segments that appear from any momentary pause of dynamic objects in laser data. (ii) The second characteristic is a modified multi-sensor point estimation fusion SLAM (MPEF-SLAM) that incorporates two individual Extended Kalman Filter (EKF) based SLAM algorithms: monocular and laser SLAM. The error of the localization in fused SLAM is reduced compared with those of individual SLAM. Additionally, a new data association technique based on the homography transformation matrix is developed for monocular SLAM. This data association method relaxes the pleonastic computation. The experimental results validate the performance of the proposed sensor fusion and data association method.

Simultaneous localization and mapping (SLAM) has been investigated in the field of robotics for two decades, as it is considered to be an effective method for solving the positioning and mapping problem in a single framework. In the SLAM community, the Extended Kalman Filter (EKF) based SLAM and particle filter SLAM are the most mature technologies. After years of development, graph-based SLAM is becoming the most promising technology and a lot of progress has been made recently with respect to accuracy and efficiency. No matter which SLAM method is used, loop closure is a vital part for overcoming the accumulated errors. However, in 2D Light Detection and Ranging (LiDAR) SLAM, on one hand, it is relatively difficult to extract distinctive features in LiDAR scans for loop closure detection, as 2D LiDAR scans encode much less information than images; on the other hand, there is also some special mapping scenery, where no loop closure exists. Thereby, in this paper, instead of loop closure detection, we first propose the method to introduce extra control network constraint (CNC) to the back-end optimization of graph-based SLAM, by aligning the LiDAR scan center with the control vertex of the presurveyed control network to optimize all the poses of scans and submaps. Field tests were carried out in a typical urban Global Navigation Satellite System (GNSS) weak outdoor area. The results prove that the position Root Mean Square (RMS) error of the selected key points is 0.3614 m, evaluated with a reference map produced by Terrestrial Laser Scanner (TLS). Mapping accuracy is significantly improved, compared to the mapping RMS of 1.6462 m without control network constraint. Adding distance constraints of the control network to the back-end optimization is an effective and practical method to solve the drift accumulation of LiDAR front-end scan matching.

Detecting glass in Simultaneous Localisation and Mapping

Purpose – To build a persistent map with visual landmarks is one of the most important steps for implementing the visual simultaneous localization and mapping (SLAM). The corner detector is a common method utilized to detect visual landmarks for constructing a map of the environment. However, due to the scale-variant characteristic of corner detection, extensive computational cost is needed to recover the scale and orientation of corner features in SLAM tasks. The purpose of this paper is to build the map using a local invariant feature detector, namely speeded-up robust features (SURF), to detect scale- and orientation-invariant features as well as provide a robust representation of visual landmarks for SLAM. Design/methodology/approach – SURF are scale- and orientation-invariant features which have higher repeatability than that obtained by other detection methods. Furthermore, SURF algorithms have better processing speed than other scale-invariant detection method. The procedures of detection, description and matching of regular SURF algorithms are modified in this paper in order to provide a robust representation of visual landmarks in SLAM. The sparse representation is also used to describe the environmental map and to reduce the computational complexity in state estimation using extended Kalman filter (EKF). Furthermore, the effective procedures of data association and map management for SURF features in SLAM are also designed to improve the accuracy of robot state estimation. Findings – Experimental works were carried out on an actual system with binocular vision sensors to prove the feasibility and effectiveness of the proposed algorithms. EKF SLAM with the modified SURF algorithms was applied in the experiments including the evaluation of accurate state estimation as well as the implementation of large-area SLAM. The performance of the modified SURF algorithms was compared with those obtained by regular SURF algorithms. The results show that the SURF with less-dimensional descriptors is the most suitable representation of visual landmarks. Meanwhile, the integrated system is successfully validated to fulfill the capabilities of visual SLAM system. Originality/value – The contribution of this paper is the novel approach to overcome the problem of recovering the scale and orientation of visual landmarks in SLAM tasks. This research also extends the usability of local invariant feature detectors in SLAM tasks by utilizing its robust representation of visual landmarks. Furthermore, data association and map management designed for SURF-based mapping in this paper also give another perspective for improving the robustness of SLAM systems.

For any robot to effectively traverse its environment, it requires a map and its location along with the orientation within that map. Often a map may not be available if the robot is presented with an unfamiliar or unknown environment. This requires the robot to construct the map as it localizes itself and navigates. This problem of concurrently building a map and localizing a robot in that environment is defined as Simultaneous Localization and Mapping (SLAM). Many SLAM applications already exist for single robot such as navigating the unmanned mines and exploring the sites with natural calamities. With the advent of swarming robots that must interact with each other, extensive research is being conducted for the extension of SLAM problem to multiple robots known as Multi-Robot SLAM (MRSLAM). In the MRSLAM environment, the efficiency is improved, and time constraints are reduced, but it's implementation is restricted due to constraints such as communication bandwidth, memory requirements and problems faced during map merging and co-ordinate transformation. This paper represents many different approaches that are being used for an implementation of MRSLAM.

Simultaneous Localization and Mapping (SLAM) algorithms are commonly used for robotic navigation and spatial awareness. A key challenge with SLAM is the large memory cost and associated computational overhead. In this study, we examine how to implement a lower computational cost version of SLAM by utilizing Dynamic Field Theory (DFT). This implementation performs key SLAM tasks with similar accuracy but with 1/5 of the memory cost of other common SLAM algorithms. Future work involves transitioning this algorithm to a physical platform with neuromorphic hardware for an energy efficient robotics solution.