Wireless Sensor Network Time Synchronization Algorithm Overview

This paper mainly introduces the application of multichannel communication technology in wireless sensor network. The corresponding solutions are proposed based on the analysis of the structure and characteristics of wireless sensor, and the multi-channel MAC protocol in wireless sensor network. In this paper, multi-channel communication technology in wireless sensor network (WSN) is studied, the existing problems and reasons are analysed, and some solutions to further promote the further development of the technology are put forward. With the wide application of WSN, the security of WSN has been paid more and more attention. In this paper, the existing time synchronization protocol, from the security point of view, and the fault tolerance design of the fits protocol. The protocol has an intrusion detection mechanism, which can detect the attack of malicious nodes in time synchronization. Aiming at the small deviation of slow attack and the problem of time synchronization error, information fusion is based on the quality principle, and according to the time synchronization information of different nodes, we make random weighted average correction for local time nodes. The simulation results show that the fits time synchronization protocol has good intrusion detection and fault tolerance capability.

This chapter presents some considerations related to the applications in environment monitoring of some concepts as: estimation, fault detection and diagnosis, theory of distributed parameter systems and artificial intelligence based on the modern technology of wireless sensor networks. All these concepts allow treatment of large, complex, non-linear and multivariable system of the environment by learning and extrapolation. The environment may be seen as a complex ensemble of different distributed parameter systems, described with partial differential equations. Sensor networks (Akyildiz & all, 2002) have large and successful applications in monitoring the environment, they been capable to measure, as a distributed sensor, the physical variables, on a large area, which are characterizing the environment, and also to communicate at long distance the measured values, from the distributed parameter environmental processes. A lot of papers and books have been published in the fields of using sensor networks in environment monitoring in the last years. Some related work is surveyed as follows. The paper (Cuiyun & all., 2006) presents some research consideration related the changes of urban spatial thermal environment, for sustainable urban development, to improve the quality of human habitation environment. The urban thermal phenomenon is revealed using thermal remote sensing imagery, based on the instantaneous radiant temperature of the land surfaces. An architecture of sensor network for environment is presented in (Lan & all, 2008). Environmental pollution and meteorological processes may be studied using various kinds of environmental sensor networks. The modern intelligent sensor networks comprise automatic sensor nodes and communication systems which communicate their data to a sensor network server, where these data are integrated with other environmental information. The paper (Giannopoulos & all, 2009) presents the design and implementaion of a wireless sensor network for monitoring environmental variables and evaluates its effectiveness. It has application in environment variable monitoring such as: temperature, humidity, barometric pressure, soil moisture and ambient light, for research in agriculture, habitat monitoring, weather monitoring and so on. In order to improve the capacity of the environmental sensor networks different techniques may be used. The paper (Talukder & all, 2008) is using a model predictive control for optimal resource management in environment sensor networks, for with application at spatiotemporal events of a coastal monitoring and forecast system. The paper (Dardari & all, 2007)

The growing awareness of the strategic value of service along with higher product performance expectations has directed many industries to adopt service centric competitive strategies in managing their supply chains. Service innovation based on currently available advanced technologies has become critical in improving enterprises’ competitive strengths. Wireless sensor network (WSN) technology, which can provide a mobile, scalable, and reliable monitoring solution, is emerging as a tool for service innovation in supply chain management. This paper provides an overview of wireless sensor network technology and discusses how it can benefit modern industries. The fundamental theories of WSN are introduced as well as an overview of the development. The impact of information technologies on supply chain management and service innovation is then briefly discussed. Much emphasis is placed on the feasibility, procedures, and critical challenges of implementing WSN in supply chain management innovation. Current and future applications of WSN are also provided, followed by a case study demonstrating the application potentials of WSN for service innovation in the healthcare industry.

The growing awareness of the strategic value of service along with higher product performance expectations has directed many industries to adopt service centric competitive strategies in managing their supply chains. Service innovation based on currently available advanced technologies has become critical in improving enterprises’ competitive strengths. Wireless sensor network (WSN) technology, which can provide a mobile, scalable, and reliable monitoring solution, is emerging as a tool for service innovation in supply chain management. This paper provides an overview of wireless sensor network technology and discusses how it can benefit modern industries. The fundamental theories of WSN are introduced as well as an overview of the development. The impact of information technologies on supply chain management and service innovation is then briefly discussed. Much emphasis is placed on the feasibility, procedures, and critical challenges of implementing WSN in supply chain management innovation. Current and future applications of WSN are also provided, followed by a case study demonstrating the application potentials of WSN for service innovation in the healthcare industry.

In this day and age, the necessities for route and situating exactness are getting ever more elevated. The global positioning and navigation system (GPS) can give high-accuracy and long haul route and situating data. But it largely depends on the external environment and is susceptible to environmental disturbances. As a result, the number of visible stars is insufficient, and even placement fails. The research on node positioning technology is of great significance to the research of wireless sensor networks, and node positioning technology is one of the important technologies in wireless sensor networks. Therefore, this paper will introduce the relevant algorithms and technologies of positioning in detail. The purpose of this text is to research how to analyze and research based on Internet of things (IoT) satellite navigation and positioning technology. And the wireless sensor network is described. The two simulation results have showed that, with the positioning technology proposed in this paper, the average positioning error of the anchor node can be kept a small constant regardless of the conditions of different packet sending intervals, changing moving rates, or increasing the transmission power and changing distance. The average positioning error provided in this paper has been kept at about 0.80 m, and the positioning accuracy is high, which is naturally newer and better than the Ssu positioning technology.

In this paper, we conduct theoretical analysis and numerical simulation on the sensor network spectrum detection technology based on Internet of Things. In the field of Internet of things, information service system as a means of information, intellectualized, is an important research direction. In structure, Internet information service system is mainly composed of persistent database. Wireless sensor network foot a composed of a set of information collection, processing, and wireless transmission in the integration of wireless self-organizing network composed of micro sensor nodes. Sensor nodes structure will be designed according to different application scenarios, the structure of the wireless sensor network node is used to describe the different periods and different types of sensor nodes. If the realization of cognitive radio technology in wireless sensor network, not only can alleviate the congestion of public frequency band, and reduce the work frequency of the wireless sensor network also makes the node after single jump coverage is wide and change.

Study and Application of Typical Disaster Monitoring and Early Warning System in Metal Mine

As an information acquisition and processing method, wireless sensor network is also an important component of the Internet of Things. As a key core technology of wireless sensor networks, localization technology has become an important direction in the current and future research of wireless sensor networks, which is also a key issue related to the real application of wireless sensor networks and the Internet of Things. The research of localization algorithm based on intelligent computing technology is paid more attention. In this paper, a novel intelligent computing method — grey wolf optimization was used to localization in wireless sensor network and proposed a novel localization algorithm. The validity and practicability of the proposed algorithm were verified by simulation experiments. The convergence performance and localization result was discussed and compared by the classical traditional intelligent computing methods—particle swarm optimization algorithm. Moreover, the localization performance under different anchor node proportion and different communication radius were analyzesed in this paper. The simulation results show that the proposed algorithm has higher localization accuracy, and it needs fewer anchor nodes and smaller communication radius to achieve the same accuracy, thus saving cost.

En la actualidad, las Tecnologías de Información y Comunicación (TIC) y asuntos relacionados, tales como el Internet de las Cosas (IoT, por sus siglas en inglés), tiene una influencia decisiva en todos los aspectos de la vida humana. IoT como fenómeno dominante es la transformación de la vida diaria mediante el uso de las funciones inteligentes como la de Identificación por Radio Frecuencia (RFID, por sus siglas en inglés) y las Redes de Tecnología de Sensores Inalámbricos (WSN, por sus siglas en inglés). Conforme el IoT avanza, se amplía en tamaño y dimensiones, mejorando muchos de los contextos de la sociedad; tales como, el sistema tradicional de biblioteca. Esta investigación propone un marco de ejecución sobre el empleo del IoT con el fin de renovar la estructura y esquema convencional de las bibliotecas a sistemas inteligentes en línea. El IoT permite la conectividad en tiempo real de un objeto físico (como un libro o cualquier otro tipo de texto) mediante el uso de las etiquetas RFID y sensores diminutos. El monitoreo continuo de los libros en tiempo real y la localización de objetos de manera geográfica son algunas de las características que se derivan del uso de las etiquetas de IoT. Estas características de IoT permiten la implementación de una línea de bibliotecas por medio de una cadena de suministros, la integración con diferentes tipos de tecnologías como la base de datos, la recopilación de datos y sistemas en la nube. El Internet de las Cosas también ofrece una panorámica de la vinculación entre el gran número de universidades y bibliotecas en el mundo en tiempo real, todo el tiempo. Se concluye que el implementar el IoT en sistemas de gestión de bibliotecas sería una estructura prometedora que puede jugar un papel vital en la organización de conocimientos del ser humano y en el acceso a informaciones para ayudar a investigadores, diseñadores y administradores en una manera más eficiente e inteligente.

A–Z survey of Internet of Things: Architectures, protocols, applications, recent advances, future directions and recommendations

Smart irrigation is considered one of the most significant agriculture management systems worldwide, considering the current context of water scarcity. There is a clear consensus that such smart systems will play an essential role in achieving the economic growth of other vital sectors. In general, the consequences of global warming and the unavailability of clean water sources for the agricultural sector are clear indications that the demand for these systems will increase in the near future, especially considering the recent expansions in the use of the Internet of Things (IoT) and Wireless Sensor Network (WSN) technologies, which have been employed in the development of such systems. An obvious result is that security challenges will be one of the main obstacles to attaining the widespread adoption of such systems. Therefore, this paper proposes a secure authentication scheme using Diffie–Hellman key agreement for smart IoT irrigation systems using WSNs. This scheme is based on Diffie–Hellman and one-way hash cryptographic functions in order to support the basic security services with a high data rate and ability to resist well-known attacks. The Burrows–Abadi–Needham (BAN) logic model is used to verify the proposed scheme formally. Based on various possible attack scenarios, a resistance analysis of the proposed scheme is discussed. Further analyses are performed in terms of the storage size, intercommunication, and running time costs. Therefore, the proposed scheme not only can be considered a secure authentication scheme but is also practical for smart IoT irrigation systems due to its reasonable efficiency factors.

Global navigation satellite systems (GNSS) are often integrated with inertial measurement units (IMU) for navigation in urban environments. The ability of these integrated systems to achieve precise positioning and navigation is highly dependent on accurate time synchronization. While the current time synchronization algorithms are capable of achieving millisecond-level synchronization in open environments, their performance deteriorates significantly in complex urban environments due to the impact on GNSS measurements of non-line-of-sight (NLOS) signals and multipath effects. Here we propose a loosely coupled GNSS/IMU integration time synchronization error modeling and compensation algorithm to tackle this problem in the context of urban vehicle navigation. In the algorithm, the time synchronization error is augmented as a state variable in the Robust Extended Kalman Filter (REKF), with the robustness factor threshold being dynamically adjusted based on the time synchronization error. Furthermore, we have designed a system time synchronization detection scheme based on two detection factors, with the aim of achieving high-precision GNSS/IMU time synchronization in complex urban environments. Experimental results show that the proposed algorithm synchronizes data time to the millisecond level in urban positioning environments. This represents an improvement of more than 90% in time synchronization precision compared to the traditional EKF-based time synchronization algorithm, and an improvement of more than 60% compared to the REKF-based time synchronization algorithm. Furthermore, compared to the EKF-based GNSS/IMU fusion algorithm, the proposed algorithm enhances the accuracy of the determination of both position and velocity in the horizontal and 3D directions by more than 50% and heading accuracy by 85%.

Wireless Sensor Network (WSN) have been attracting increasing interest for supporting a new generation of ubiquitous computing systems with great potential for many applications. However, the communication paradigms in WSNs differ from the ones associated to traditional wireless networks, triggering the need for efficient wireless communication technology. Several wireless technologies have emerged ranging from short and medium distance. Bluetooth, ZigBee and Impulse Radio Ultra Wide Band (IR-UWB) are three popular short range wireless communications. Due to its various features and advantages (especially low power consumption and low complexity), IR-UWB is a very promising wireless communication technology for WSN. In this paper, we evaluate the main features and advantages of this new technology (IR-UWB) for WSN in terms of transmission time, data coding and power consumption compared to Bluetooth and ZigBee. To analyze and evaluate the main features and advantages of IR-UWB as an efficient short range wireless communication technology for WSN, we used MiXiM platform under OMNet++ simulator.

This paper proposes an architecture based on Wireless Sensor Network (WSN) technology for intelligent guiding of a transportation network. Based on this architecture, a complete case study of intelligent guiding and controlling system (IGCS) is presented. Simulation results show that the system is satisfactory.

This paper is concerned with the application of wireless sensor network (WSN) technology to long-duration and large-scale environmental monitoring. The holy grail is a system that can be deployed and operated by domain specialists not engineers, but this remains some distance into the future. We present our views as to why this field has progressed less quickly than many envisaged it would over a decade ago. We use real examples taken from our own work in this field to illustrate the technological difficulties and challenges that are entailed in meeting end-user requirements for information gathering systems. Reliability and productivity are key concerns and influence the design choices for system hardware and software. We conclude with a discussion of long-term challenges for WSN technology in environmental monitoring and outline our vision of the future.